Used Lab Equipment

Description:

The NuAire US AutoFlow Automatic CO2 water-jacketed incubator has been designed to provide a reliable controlled in vitro environment for optimum tissue cell culture growth. The US AutoFlow offers laboratory technicians an incubator which, after set-up, virtually runs itself to dependably control temperature and CO2 levels, with an optional relative humidity control, providing optimum conditions for culture growth within the chamber. The US AutoFlow is run by a programmable microcontroller that samples input sensors, sets control outputs, makes corrections through the use of fuzzy logic, and displays status on the control panel. This provides for an exceptionally stable interior environment.

Specifications:

• Input Voltage: 115 VAC
• Input Current: 5 A
• Input Frequency: 60 Hz
• Input Phase#: 1
• Dimensions (W x D x H): 31” x 25” x 34.25” (78.74 cm x 63.50 cm x 86.99 cm)

Specifications:

 

• Dimensions: 25.5” x 40.5” x 27” (W x H x D)
• Weight: 218 lbs
• Shelf capacity: 20 shelves
• Max. weight capacity: 30 lbs
• Temperature uniformity: ±0.2°C

Description:

Designed to provide an optimal, stable growing environment for cultures. 5.8 cu.ft. interior capacity. Ideal for cell biology, viral growth, tissue culture, genetics studies, cancer research, embryo growth and microbiological/biochemical assays.

Features:

• Thermal conductivity CO2 sensor provides accurate CO2 control for applications with more consistent temperature and humidity levels.
• CO2 specifications:
• range: 0 to 20%
• control sensitivity: 0.1%
• stability: ±0.1%
• CO2 auto shut-off upon door opening. Factory calibrated at 5 and 10%.
• Temperature specifications:
• range: 5°C above ambient to 60°C
• control sensitivity: ±0.1°C
• uniformity: ±0.4°C at 37°C.
• Factory calibrated at 37°C.
• A water-jacket surrounds interior chamber for thermal stability and uniform heating.
• Features include an audible/visual CO2 alarm programmable for high/low deviation from setpoint, CO2 auto shut-off and a CO2 test port in center of glass door. Temperature indicators include water-jacket temperature indicator and audible/visual programmable temperature alerts on high/low deviation from setpoint.
• Tempered inner glass door is heated by outer door to prevent condensation. Quick response and recovery after door openings.
• Has a 1.5" porthole in the rear wall with silicone stopper, adjustable levelling feet, closed-cell silicone inner door gasket that maintains a positive seal and water-jacket drain.
• Comes with a gas input HEPA filter. Optional in-chamber HEPA filter removes 99.97% of airborne particulates such as hair, pollen, plant spores, skin and bacteria to dramatically improve air quality and provide additional protection from contamination. Maintains still air culture environment without high-velocity airflow (any filters that are with the chamber are not guaranteed)
• Reversible inner and outer doors allow left-to-right or right-to-left opening.
• Control panel key switch for protection against unauthorized access.
• RS485 data port.
• Remote alarm contacts. Battery back-up for alarm system.
• Autoclavable water pan helps to manage humidity, the primary factor in preventing cell and media desiccation.
• Includes 2 perforated, removable stainless steel shelves. Expandable to 20 shelves.

Features:

There are four internal convenience outlets which allow simple connection to internally placed appliances such as CPRA, Roller Drums, Magnetic Stirrers, etc. Fans take air from the chamber top, pass it over the 1100 watt heater and re-inject it into the chamber on the bottom back wall. A microprocessor temperature controller and membrane keypad allows simple setting and monitoring of chamber temperature. A safety thermostat is included to prevent over-temperature failures. Shelf brackets are included for mounting of optional shelves. The control panel features indicating lights and dials for automatic control of temperature

 

Specifications:

• Exterior Width Depth Height: 41” (104cm) 31” (76cm) 87” (221cm)
• Interior Width Depth Height: 35” (89cm) 26” (66cm) 76” (193cm)
• Temperature Control Range: Ambient +9C to 50C
• Temperature Uniformity: ±1.5o @ 37°C (or better)

Increase lab versatility with Fisher Scientific heat blocks which offer a range of configurations with interchangeable modular blocks for a variety of application needs.

Specifications:

• Temperature range: Ambient to +5 ℃ to 130 ℃ (Ambient at 25℃)
• Controller type: PID
• Weight: 2.9 kg

Ideal for a range of temperatures acceptable in Drosophila culture.

Specifications:

 

• Temperature Range: 0° to 45°C
• Capacity: 575 L
• Dimensions: 34.3” x 77.5” in. (W x H)
• Included Shelving: 8

Multi-purpose units are ideal for incubation and activation of cultures, enzyme reactions, blood urea nitrogen determinations, immunoassays, melting/boiling points, and a variety of other laboratory procedures.

Specifications:

• Temperature Range:5° above ambient to 150°C (302°F)
• Temperature Stability:+/- 2°C
• Power Requirements:100W
• Dimensions:4 x 8 x 3.5 in (31.5 x 20.3 x 8.9 cm)
• Weight:8 lbs (2.6 kg)

The new SureTemp™ Incubator series provides the highest level of temperature control with uniformity and stability levels that are unmatched by competitive models in the same class. Each incubator is equipped with the SureCheck™ data logging system for verification of chamber temperature. The SureCheck system records temperature data points as often as every 60 seconds and stores this information on a flash drive. The data can then be viewed and saved using the included the SureCheck software. The recorded data can also be used to plot temperature points on a graph or exported to a spreadsheet program for verification or storage/record keeping. Unlike other laboratory incubators, the SureTemp series offers “Dual-Convection” technology, allowing users to choose between mechanical convection mode* (for exceptional temperature uniformity) or gravity convection mode* (for longer incubations where airborne contamination or drying of samples may be an issue). The heating elements are strategically located on multiple sides of the chamber and contents can be viewed with the separate inner glass door without disrupting the temperature environment.

 

Specification:

 

• Temperature Range: Ambient +5 to 75°C
• Temperature Accuracy: ±0.25°C
• Temperature Uniformity: ±0.25°C
• Temperature Increment: 0.1°C
• Temperature Stability: 0.1°C
• Time Range: 1 min. to 99 hours 59 min. (or continuous)
• Chamber Material: Stainless Steel
• Electrical: 115V or 230V, 50-60Hz / 40L: 420W, 70L 520W, 130L: 570W

Description:

These low-maintenance incubators employ advanced, air-jacketed temperature control technology to ensure an optimal and stable growing environment for cell and tissue cultures. Internal shelves and supports are easily installed and removed without tools. Easy-to-use interface panel features separate large LED displays for temperature and CO2 parameters and convenient, touch-sensitive membrane controls that provide the status of incubator functions.

Specifications:

• Dimensions (W x D x H): 25.1 x 34.1 x 30.2” (637 x 867 x 766 mm)
• Chamber Volume: 151 L
• Weight: 154.3 lbs. (70 kg)
• Ambient Temperature Range: +18-33°C

 

Features:

 

Dry bath incubator

 

Specifications:

 

 

• Electrical Data: 120V, 0.6 AMPS, 75 W, 50/60 Hz

• Phase: 1

• Control Stability: ±0.5 °C

• Temperature Range: 25 to 115 °C

• Dimensions (H x W x D): 4 x 6 x 9 in. (10.1 x 15.2 x 22.8 cm)

 

 

Fisher Scientific Isotemp low temperature incubators are an ideal choice for incubation above or below ambient temperature.  Low temperature, refrigerated incubators are suited to fit your application needs for BOD (biochemical oxygen demand) waste water testing, food, beverage and agricultural testing, pharmaceutical research, microbiology, yeast growth and more. 

Specifications:

• Storage Capacity: 4 cubic feet
• Temperature Range: -15°C

92132f4f-f787-4f2c-ae6e-e0fcecc4daee.jpeg (https://dl.airtable.com/.attachments/194775d476fcb3b9f3231a85dda08afb/4da03aed/92132f4f-f787-4f2c-ae6e-e0fcecc4daee.jpeg)

92132f4f-f787-4f2c-ae6e-e0fcecc4daee.jpeg (https://dl.airtable.com/.attachments/194775d476fcb3b9f3231a85dda08afb/4da03aed/92132f4f-f787-4f2c-ae6e-e0fcecc4daee.jpeg)

92132f4f-f787-4f2c-ae6e-e0fcecc4daee.jpeg (https://dl.airtable.com/.attachments/194775d476fcb3b9f3231a85dda08afb/4da03aed/92132f4f-f787-4f2c-ae6e-e0fcecc4daee.jpeg)

The Labline 2314 Orbital Shaker is ideal for rotating flasks, vials, beakers, Petri dishes, and other sample containers.

Specifications:

• Platform Dimensions: 5 x 12.5 in
• Load Capacity: 10 lbs
• Rotating Orbit: 75 in
• Speed Range: 40 -220 rpm