Used Lab Equipment

The E-25R Classic Refrigerated Incubator Shakers are large capacity shakers utilizing a UniCentric single eccentric counterbalanced drive to provide horizontal plane rotary motion in a 2.54 cm (1 in) circular orbit. A Proportional/Integral (PI) Microprocessor controller with instantaneous digital feedback controls the speed over a range of 50-400 rpm.   

Specification:

• Shaking

• Speed: 50-400 rpm
• Control Accuracy: ± 1 rpm
• Indication: 3-digit LED, displayed in 1 rpm increments
• Stroke/Orbit: 2.54 cm (1 in)

• Temperature

• Range: 15°C below ambient temperature* (min. 4°C) to 60°C
• Control Accuracy: ± 0.1°C @ 37°C
• Indication: 3-digit LED, displayed in 0.1°C increments
• Ambient Operating Environment: 10 - 35°C, 20 to 80% relative humidity, non-condensing
• Refrigerant: R-134A
• Alarms: Visible and audible warning indication when speed deviates more than 5 rpm, and temperature more than 1°C from setpoints, and when timer has expired.
• Timer: 0.1 to 99.9 hours. Shuts off agitation at end of period. Can be deactivated for continuous operation.
• Automatic Restart: Automatic restart after power is restored. Setpoints and operating status are retained in memory during power interruption.
• Drive interrupt: Automatic drive-interrupt when cover is opened.
• Platform: 76 x 46 cm (30 x 18 in)
• Overall Dimensions (W x D x H): 127 x 77 x 85 cm (50 x 30.5 x 41.7 in)
• Chamber Dimensions (W x D x H): 85 x 58 x 48 cm clearance above platform (33.5 x 23 x 19 in)
• Net Weight: 204.5 kg (450 lb)
• Gross Weight: 281 kg (480 lb)

Specifications

• Temperature Range: 5C above ambient to +60C
• Temperature Uniformity: ±0.3C at 37C
• Interior Construction: Shiny stainless steel
• Interior Volume: 29 cu.ft. (821.2 liters)
• Interior WxHxD: 31.0" X 60.0" X 27.0" (78.7cm. X 152.4cm. X 68.6cm.)
• Exterior WxHxD: 38.0" X 80.0" X 33.0" (96.5cm. X 203.2cm. X 83.8cm.)
• Humidity System: 4 gal. (15.1liter) tank
• Humidity Ranges: Off, med. >80%, high >90%
• CO2 Sensor: Thermal Conductivity (T/C)
• CO2 Range: 0-20%

Thermo Scientific MaxQ 6000 (SHKE6000-7) Incubated/Refrigerated Stackable Shaker offers sample storage and orbital shaking with intuitive, easy-to-use digital controls. These shakers save space by stacking units two-high on the floor.Choose from two temperature ranges to fulfill a variety of molecular biology, protein expression or plasmid purification studies.

Specifications:

• Platform Dimensions: 18 x 18 in
• Overall Dimensions:33 x 27 40.5 in
• Speed Range:15 - 300 rpm +/- 1 (stacked)
• Speed Range:15 - 500 rpm +/- 1 (unstacked)
• Temperature Range:Ambient 10°C to 60°C°
• Orbit:75 in
• Shipping Weight:330 lb
• Power Requirements:120V, 60Hz

VWR Gravity Convection General Incubators combine microprocessor controlled temperature with a state-of-the-art design that delivers a true naturally-occurring gravity convection. VWR Gravity Convection General Incubators are designed for convenient and safe use in many applications such as Animal & Plant Cell Culture, Constant Temperature, Germination Test and B.O.D. Test.

Specification:

• Capacity: 155L (5.4 cu. ft.)

• Dimension (L x W x H)

• Internal: 475 x 550 x 600 mm (18.7 x 21.7 x 23.6 in.)
• External: 669 x 709 x 906 mm (26.3 x 27.9 x 35.7 in.)
• Heater: 400W

• Temperature

• Range: Ambient Temperature +8°C to 65°C
• Fluctuation: ±0.3°C at 37°C / 50°C
• Variation: ±0.7°C at 37°C or ±1.2°C at 50°C
• Sensor: PT 100
• Control Sensitivity: ±0.1°C
• Heating-up Time: 30 minutes to 37°C or 45 minutes to 50°C
• Recovery (Door open 30 sec): 8 ~ 11 min. to 37°C or 12 ~ 16 min. to 50°C
• Controller: Advanced, adaptive microprocessor control with rotary knob (turn & push)
• Display: Digital LCD display with 1/10 of one degree
• Timer: 99 hr 59 min (delay/continuous function)

• Material

• Internal: stainless steel (#304)
• External: powder coated steel
• Inner Door: Inner tempered glass door
• Shelves: 2 each of stainless steel shelves
• Ventilation: 1ea of Ventilation hole with stainless steel cap, hole diameter 40mm
• Circulation: Gravity convection type
• Safety device: Over temperature and over current protector, sensor error detector
• Net weight: 71 kg / 157.4 lbs
• Power consumption: 420.5 W
• Energy consumption: 99 Wh at 37°C or 212 Wh at 50°C
• Power supply: 120V, 60Hz or 230V, 50/60Hz

Boekel Digital Dry Bath Incubators are designed to be used with standard aluminum dry blocks (nominally 3” x 3¾” x 2” high) of varying configurations for heating test tubes, microtubes and other small vessels. These Incubators are available in two sizes; Model 113002 has a two block capacity and includes an easily programmed PID (proportional integrative derivative) controller for rapid heat-up and accurate temperature control.

Specification:

• Dimensions (W x D x H): 8 x 9.8 x 3.5 in. (20.3 x 24.9 x 8.6 cm)
• Net weight: 5 lbs. (2.3 kg)
• Power: 115 VAC, 200 watts / 230 VAC, 230 watts
• Temperature range: ambient 5°C to 120°C
• Uniformity: ±0.25°C at 37°C
• Stability: ±0.2°C from 37 - 100°C

Specification:

• Temperature Range: -73°C to +175°C
• Control Tolerance: ±0.2°C (Measured at the control sensor after stabilization)
• Uniformity: ±0.5°C (Variations throughout the chamber after stabilization)
• Heat-up Transition Time: 5°C/minute typical

• Refrigeration and Heating System

• High Stage Refrigerant: R-404A (Dupont HP-62)
• Low Stage Refrigerant: R-508B (Dupont SUVA-95)
• Compressors: 1/2 HP x 1/3 HP Copeland hermetic compressors in a cascade configuration.
• Condenser: Air cooled
• Heat of Rejection: 4,000 BTUH (maximum rated chamber load at maximum cooling rate from high temperature soak)
• Heater Power: 600 Watts
• Temperature Controller: 256 step, 40 profile, ramp and soak programmable memory. RS-232/485 interface.
• Limit Controller: Independent high and low temperature limits. Triggers an audible alarm and shuts down the chamber.
• Power Requirements: Input voltage - 120 V nominal (110 to 126 VAC), 60 Hz, 1 PH, maximum current draw 15 A, recommended minimum service 20 A
• Inside Dimensions (W x H x D): 16 x 12 x 14 in. (1.55 cubic feet) / 406 x 305 x 353 mm (44 liters)
• Outside Dimensions (W x H x D): 24 x 61 x 26 in. (610 x 1549 x 660 mm)
• Chamber Weight: 300 pounds

Specifications:

Platform Size: 18 x 30
Maximum Capacity  (250 ml flasks on universal platform): 48
Capacity & Largest Flask Size on Universal Platform: 6 x 4L
Orbit Diameter (in): 1
Temperature Range (C°): A -15 to 80
Agitation (rpm): 25 to 400
Type/Application: Floor
Refrigeration: Optional
Multi-Step Programming: Optional
Photosynthetic Lights: Optional
Gassing Manifold: Optional
Overall dimensions W x D x H (in): 50 x 33 x 27
Weight (lbs): 490

The Fisher Scientific dry bath incubator 11-718-2 features low and high temperature settings with exceptional temperature control and uniformity. The power coated steel body construction provides durability for demanding applications and the compact design saves valuable bench space.

Specifications:

• Power Requirements: 115V, 2.3A, 50/60Hz
• Temperature Range: 5°C above ambient to 130°C

Highly accurate, microprocessor controlled, dry block heating unit with two aluminum blocks. Provides uniform temperature control for heating microtubes, test tubes and other vessels, including microplates and slides.

Specifications:

• Temperature Range: Ambient 5° to 150°C
• Temperature Accuracy: ± 0.2°C
• Increments and Display Resolution: 0.1°C
• Timer: 1-999 Min
• Block Construction: High Grade Aluminium
• Chamber: Fast Heating Aluminum
• Dimensions: 8.7”x 10.3” x 3.2” in. (W x D x H)

The new SureTemp™ Incubator series provides the highest level of temperature control with uniformity and stability levels that are unmatched by competitive models in the same class. Each incubator is equipped with the SureCheck™ data logging system for verification of chamber temperature. The SureCheck system records temperature data points as often as every 60 seconds and stores this information on a flash drive. The data can then be viewed and saved using the included the SureCheck software. The recorded data can also be used to plot temperature points on a graph or exported to a spreadsheet program for verification or storage/record keeping. Unlike other laboratory incubators, the SureTemp series offers “Dual-Convection” technology, allowing users to choose between mechanical convection mode* (for exceptional temperature uniformity) or gravity convection mode* (for longer incubations where airborne contamination or drying of samples may be an issue). The heating elements are strategically located on multiple sides of the chamber and contents can be viewed with the separate inner glass door without disrupting the temperature environment.

Specification:

• Temperature Range: Ambient +5 to 75°C
• Temperature Accuracy: ±0.25°C
• Temperature Uniformity: ±0.25°C
• Temperature Increment: 0.1°C
• Temperature Stability: 0.1°C
• Time Range: 1 min. to 99 hours 59 min. (or continuous)
• Chamber Material: Stainless Steel
• Electrical: 115V or 230V, 50-60Hz / 40L: 420W, 70L 520W, 130L: 570W

These multi-functional shakers provide a 3-dimensional "nutating" motion for thorough, foam-free mixing in blood and centrifuge tubes, as well as in a variety of flat vessels.Both models come standard with autoclavable dimpled mats while optional flat mats are also available for mixing other vessel types. Stacking platforms can be purchased as accessories, effectively doubling the usable surface area of each model. Even the smallest single platform configuration has 24% more platform work surface than traditional nutating mixers. These mixers feature maintenance free, brushless motors capable of loads up to 2kg and are safe for use in cold rooms and incubators.

Specification:

• Speed: Fixed, 24 rpm (20 rpm, 230V)
• Tilt Angle: +/-20°
• Platform Size: 10.5 x 7.5 in./ 27 x 19 cm
• Load Capacity: 4 lbs. / 2 kg
• Operating Temp. Range: +4 to +45°C
• Dimensions: (W x D x H): 10.5 x 7.5 x 8 in. / 27 x 19 x 20 cm
• Weight: 4.4 lbs. / 2.2 kg
• Electrical: 115V or 230V, 50-60Hz, 50W

The new MyBlock™ Mini DryBath is a personal sized instrument that fits in the palm of your hand. Six block configurations are available for a variety of tube sizes, ranging from 0.2 to 50ml. A large, backlit display is used to control temperature up to 80° C (minimum temperature is ambient +5° C). Each unit includes a clear plastic cover that provides enhanced temperature uniformity and ramping time. A convenient block lifter is also included, allowing block to be removed from the instrument before they have cooled.

Specification:

• Temp. Range: RT -25°C to 100°C
• Temp. Accuracy: +/- 0.5°C
• Temp. Increments: 0.1°C
• Temp. Uniformity: +/- 0.2°C
• Ramp Time (20°C to 100°C): <20 min.
• Dimensions (W x D x H): 4.3 x 6.4 x 5.5 in./ 11 x 16.2 x 14cm
• Block Dimensions: 1.85 x 2.8 x 1.25 in. / 4.7 x 7.1 x 3.2 cm
• Weight: 2 lbs / 1 kg
• Electrical: Universal Voltage, 100 to 240V, 50-60Hz, 50W