Used Lab Equipment

Features:

2050FS Single Dry Block Heater

Specifications:

• Volts: 120
• Amps:0.9
• Hz: 50/60

Description:

Cast-aluminum top plate offers fast, uniform heating. Reaches max. temp. of 370 °C in 25 min. Demand-type thermostat maintains surface temp. within ±3 °C and compensates for voltage and ambient temp. fluctuations. Solid-state speed control on 120V unit has excellent slow-speed control, high starting torques, and constant stirring action. Stirring speed range: 100 to 1,000 rpm. Supplied with 3-wire cord and plug. Size: 9.6 L × 9 W × 5 in. H; 7 × 7 in. plate. UL and CSA listed.

Specifications:

Dimensions: 650 x 560 x 260 nm (W x D x H)

Description

• Adjustable temperatures from -20° to -15°C (-4° to +5°F)
• Capacity: 5.6 cu. ft. (159L)
• Manual defrost
• R-134a CFC-free refrigerant
• Base-mounted 360w compressor
• Hydraulic thermostat
• Baked-on, acrylic enamel exterior
• Easy-to-clean formed interior
• Three fixed shelves
• Solid door is mounted to open from left

Description:

Your Fisher hotplate, stirrer and stirring hotplate are general purpose heating and/or stirring devices intended for general laboratory procedures. Three sizes are available, referring to the size of the top plate in inches: 4x4, 7x7, and 10x10. All three sizes are available as a hotplate, stirrer, or combination stirring hotplate. In addition, all three are available with a ceramic top plate. The 7x7 size is also available with an aluminum top plate. The catalog numbers above refer to the units that are available. A vessel with a flat bottom is recommended on the hotplate and stirring hotplate for ideal heat transfer. Glass containers should be made of heat resistant glass such as borosilicate. Avoid soda lime glass containers, metal containers, sandbaths, or vessels with a rim around the bottom as these could cause damage to the hot plate and stirring hot plate.

Specifications:

• 7x7 ceramic top models
• 150°C (302°F) - 540°C (1004°F)
• 100 - 1000 RPM

Description

• Adjustable temperatures from -20° to -15°C (-4° to +5°F)
• Capacity: 5.6 cu. ft. (159L)
• Manual defrost
• R-134a CFC-free refrigerant
• Base-mounted 360w compressor
• Hydraulic thermostat
• Baked-on, acrylic enamel exterior
• Easy-to-clean formed interior
• Three fixed shelves
• Solid door is mounted to open from left

Features:

THERMO FORMA CMR-2800 MODEL

Specifications:

• 110 LITERS

Features:

Isotemp refrigerated, 27.3 cu ft, w/chart recorder

Specifications:

• Volts: 115
• Phase: 1
• Hz.: 60

Description:

The Fisher Scientific Isotemp 550D Economy Lab Incubator is a gravity-convection incubator that provides analog on/off control at operating temperatures ranging from 30°C to 75°C (86°F to 167°F). A safety back-up is built into the controller; if the primary heater control fails, the back-up will maintain control at 3°C above the setpoint. An alarm LED then indicates that the backup controller is operating the incubator. The incubator also features a convenience electrical outlet inside, at the lower right back panel. This incubator has a 5 cubic-ft capacity and includes 2 adjustable wire shelves.

Specifications:

• Dimensions: 23” x 24” x 39”

Provide controlled dry heat for a wide variety of clinical and general chemistry applications.

Specifications:

• Temperature Range: 5°C - 130°C
• Power Requirements: 120V, 50/60Hz

The Fisher Scientific dry bath incubator 11-718-2 features low and high temperature settings with exceptional temperature control and uniformity. The power coated steel body construction provides durability for demanding applications and the compact design saves valuable bench space.

Specifications:

• Power Requirements: 115V, 2.3A, 50/60Hz
• Temperature Range: 5°C above ambient to 130°C