Used Lab Equipment

2 ft Purifier Vertical Clean Bench

Specifications:

• Nominal downflow velocity of 45-65 fpm
• Aerodynamic air foil
• Supply HEPA filter, 99.99% efficient on particles 0.3 micron
• ISO Class 5 air (formerly Class 100 per Federal Standard 209E)
• Disposable prefilter
• Variable speed built-in blower with motorized impeller and solid state control rated for 10 amps
• Intrinsically-sound, negative pressure design
• Minihelic pressure gauge
• Air diffuser
• UV-resistant, glacier white and gray, powder-coated aluminum and steel construction
• UV-opaque and resistant 1/4" thick tempered safety glass sash and sides
• Fluorescent lamp
• Light and blower switches
• 9.4" high sash opening
• Ergonomic 10° angled and hinged sash that pivots upward, locks to a loading height of 20" and has wiping seals to promote ISO Class 5 conditions
• Two utility ports with iris openings and plugs
• ETL Listing (115 volt, 60 Hz models)
• One year warranty on parts and service

 

PuriCare Open Access Station (transfer station)

Features

• Generous work surface area to accommodate standard rodent cages
• Electric hydraulic lift for infinite height adjustment from 36.5" to 47" with the push of a button
• Recessed and angled sashes for closer viewing without glare
• Large 14" high sash openings to accommodate various cage sizes with brakes
• Large 5" diameter, non-marking polyurethane casters
• Two 99.99% efficient HEPA filters to trap allergens
• Nominal downflow velocity of 55 fpm.
• Economical, disposable upper and lower prefilters
• Variable speed motor/blower and impellers
• Particulate-free ISO Class 5 (formerly Class 100) air
• Retractable, safety orange, top right-side mounted power cord, 28' (9 m) on 115 volt model
• Two push/pull bars on the right hand side to facilitate transport
• Two 32-watt fluorescent lights
• Two easy-to-read, ADA-compliant Minihelic pressure gauges
• ADA-compliant light and blower switches
• ADA-compliant electrical duplex
• Single pass airflow design with no recirculation through the enclosure helps prevent heat stress and odor build up.
• Type 304 stainless steel dished work surface
• Exterior is durable glacier white and slate gray epoxy-coated steel
• Full three year warranty on parts and labor
• ETL listed (115 volt models)
• CE Conformity Mark (230 volt models)

Specifications:

• Deep 23" interior to accommodate large micro and analytical balances
• Ergonomic air foil with aerodynamic Clean-Sweep airflow openings
  Upper dilution air supply
  • Upper containment sash foil
  • Zone-perforated rear baffle
  • Side-entry air foils
• Exhaust HEPA filter, 99.99% efficient on particles 0.3 micron in size
• True bag-in/bag-out filter disposal system
• Built-in blower with dynamically-balanced, vibration-isolated motorized impeller
• Intrinsically-safe, negative pressure design
• Minihelic pressure gauge
• Space-saving design. No separate filtered exhauster is required.
• Upper diffuser screen
• Quiet operation from 48-66 db(A) depending on airflow
• Glacier white and gray, dry powder epoxy-coated aluminum frame and steel rear plenum and baffle. No unreliable plastic-to-plastic bonding is used.
• Pre-wired fluorescent lamp and switches for blower and light
• Speed control
• 1/4" thick tempered safety glass front sash and sides
• 4" or 12.0" high sash opening
• Ergonomic 10 degree angled and hinged sash that pivots upward, locks for loading and has a wiping seal to contain contaminants
• Two utility ports
• Particulate containment independently verified by SafeBridge Consultants, Inc.

 

Description:

Purifier Vertical Clean Benches direct HEPA-filtered air downward over the work area to provide ISO Class 5 (formerly Class 100) conditions and protect your work from particulate contamination. Applications for clean benches include plant tissue culture, media plate preparation, electronics inspection, medical device assembly and pharmacy drug preparation. Because they do not provide protection to the user, they should not be used in conjunction with biohazardous material, toxins or radionuclides.

Specifications:

• Weight: 125.0 lbs (57.0 kg)
• Dimensions (W x D x H): 24" x 28.6" x 36.8"
• Electrical: 115 volts, 60 Hz, 5 A
• Laminar Flow: Vertical
• Nominal Width: 2'
• Conformance: CAN/CSA C22.2, UL, UL Standard 3101-1/61010-1
• Nominal downflow velocity of 45-65 fpm
• Aerodynamic air foil
• Supply HEPA filter, 99.99% efficient on particles 0.3 micron
• ISO Class 5 air (formerly Class 100 per Federal Standard 209E)
• Variable speed built-in blower with motorized impeller and solid state control rated for 10 amps
• Intrinsically-sound, negative pressure design
• Minihelic pressure gauge
• Air diffuser
• UV-resistant, glacier white and gray, powder-coated aluminum and steel construction
• UV-opaque and resistant 1/4" thick tempered safety glass sash and sides
• Fluorescent lamp
• Light and blower switches
• 9.4" high sash opening
• Ergonomic 10° angled and hinged sash that pivots upward, locks to a loading height of 20" and has wiping seals to promote ISO Class 5 conditions

Features:

-Flexible programming--customize wash, rinse, and dry cycle combinations

-Rinse up to six times per program to ensure contaminant-free glassware

-Detach and reconfigure spindles, spring clips, and accessories

-Exclusive upper spindle rack option holds up to 24 additional narrow neck flasks

 

Specifications:

• Chamber Width (in): 22.625
• Chamber Height (in): 26
• Chamber Depth (in): 21
• Power (VAC): 115
• Power (Hz): 60

Features:

• Interior Dimensions: 35.5” W x 28″ D x 32″ H
• Efficient Particle: 0.3 micron
• Protection from Radioisotopes, bacteriological and carcinogenic agents
• Paticulate air HEPA filter 99.99% Efficient

Paramount filtered enclosures are self-contained work stations that use carbon filters to remove unsafe concentrations of organic solvents, formaldehyde, acid gases or ammonia from the work area. Contaminants released within the enclosure are drawn through a rear baffle, diluted with air and adsorbed onto or treated by a carbon filter.

Specifications:

• Glacier white epoxy-coated aluminum frame, airfoil, back panel, baffle, and upper cabinet.
• 3/16” thick tempered safety glass sides
• Dimensions:  36 W x 29 D x 58 3/8, inches
• Electrical Requirements:  115V, 60 Hz, 3 amps

Features:

• Glacier white, dry powder epoxy-coated aluminum construction.
• 3/16 in thick tempered safety glass sides.
• Air-mixing, epoxy-coated steel rear baffle.
• Two roughing pre-filters.
• Two 1.5 in diameter utility ports with plastic plugs.
• Gas-assisted filter clamping mechanism.
• Control panel with LCD for display of filter time elapsed; programmable timer for audio/visual alarm; ALARM/MUTE switch with LED indicator; SET FILTER TIME, UP/DOWN, and ENTER programming switches; and event timer.
• Built-in, non-sparking motor/blower.
• Pre-wired with two 20-watt fluorescent lights and switches for blower and light.
• Angled ¼ in thick tempered safety glass sash, adjustable to two operating height positions (13 in and 15 in to work surface), pivots to full open position (24.25 in) for cleaning and transfer of material.
• Face velocity of 100 fpm (236 CFM) when sash opening to work surface is 13 in and 80 fpm (236 CFM) when sash opening is 15 in.
• Air sampling syringe for test port.
• Shipped fully assembled.

 

Specifications:

 

• Power Requirements: 115 V, 60 Hz, 3 A

• Weight: 290 lbs

 

 

Description:

• Designed to duct to the outside from one of four exhaust connections.
• For use with remote blower.
• Adjustable baffle.
• Pre-wired for operation on 115 volts, 60 Hz, 15 amps.
• 8', three-wire cord with plug.
• Three each 3.25" x 10" exhaust connections located on the top and both sides.
• 6" nominal diameter exhaust connection located on the back.
• Static pressure loss does not exceed .28" H2O at 50 fpm (167 CFM).

Specifications: Catalog Number: 7810002 Temperature Range: Ambient to 100°C Age: 2003 115V, 50/60hz Benchtop concentrator w/Heat Boost The Heat Boost Feature surrounds the chamber wall with additional heat at the same user programmed temperature

Features:

FreeZone 12 Liter Console Freeze Dry System is designed for moderate aqueous sample loads. This model is not for use with samples containing acetonitrile. Removes a maximum of 8 liters of water in 24 hours.

Specifications:

• Collector Temperature: -50° C, -58° F
• Ice Holding Capacity: 12L
• Vacuum Pump Displacement Required: 98 L/min or larger displacement
• Dimensions: 32.2" w x 28.0" d x 36.3" H

Inludes Vacuum Pump

CFC-free refrigeration systems ideal for rapid, environmentally-safe cooling. Models have brushed stainless steel and glacier white, epoxy-coated steel exterior with blue accents. Equipped with automatic one-button start-up to initiate collector and vacuum, dual LCD screens for vacuum and collector temperatures with LED “waves” to indicate proper conditions, and a 22.9cm (9") condenser drain hose. All models feature a red alarm light to indicate any abnormal system events such as power failure or improper line voltage supply, a moisture sensor that detects moisture in the collector chamber area, a vacuum break valve that bleeds air into the system when power to dryer or vacuum pump is shut off, and a rear-mounted RS-232 port.

Details:

• 4.5 Liters
• Temperature Range: Ambient to 50°C (–58°F).
• Permanently-installed 10-port drying Chamber

 

Specification: 

• Weight: 150.0 lbs
• Weight metric: 68.0 kg
• Dimensions: 31.8" w x 28.1" d x 14.5" h
• Dimensions metric: 80.8 cm w x 71.4 cm d x 36.8 cm h
• Electrical: 115 volts, 60 Hz, 16 A
• Collector Temperature: -50°C, -58°F
• Conformance: CAN/CSA C22.2, UL
• Ice Holding Capacity: 6 L
• Style: Benchtop

FreeZone Plus 6 Liter Cascade Console Freeze Dry System is designed for light to moderate loads of low eutectic point samples. Removes a maximum of 4.1 liters of water in 24 hours.* Includes brushed stainless steel and powder-coated steel exterior; stainless steel collector chamber and coil; LCD that displays system operating parameters, set-up parameters and alarm messages (choice of temperature in °C and ° F, choice of vacuum in mBar, Pa and Torr); two 1/3 hp CFC-free refrigeration systems; red alarm light; LED vacuum and temperature wave graphs; patented moisture sensor; vacuum control/break valve; rear-mounted RS-232 port; automatic start-up switch for collector cool-down and vacuum pull-down with manual override switches; hot gas defrost and switch; retractable collector drain line; 3" diameter port for connection of drying accessory; power switch; rear-mounted electrical receptacle for vacuum pump connection (pump not included); 3/4" OD vacuum connection; 3/4" ID vacuum hose; and two clamps.

 

Lyophilize and stopper multiple vials under vacuum using the FreeZone Stoppering Tray Dryer, or freeze-dry batch samples for bulk processing directly on its three shelves.  A digital display allows the user to program the set point temperature. Holds up to five programs of up to five segments each, with memory for repeating protocols.

 

Stoppering Shelf Details

• 3 Shelves
• 600 Square Inches of Area
• Provides Temperature Control and Stoppering under Vacuum

 

Details:

• Console Dimensions: 2" w x 28.0" d x 36.3" h
• Stopper Dimensions: 32" w x 24.6" d x 27.1" h
• Electrical Specification: 115 volts, 60 Hz, 16.0 A
• Plug Type: North America, 115 volt, 20 A
• Style: Console PN: 7934020  
• Collector Type: Stainless steel
• Ice Holding Capacity: 6 L
• Collector Temperature: -84°C, -119°F
• Electrical Standard: Domestic
• Built-In Options: Stoppering Tray Dryer
• Drying Accessory: Stoppering Tray Dryer is included PN: 7948020
• Conformance: CAN/CSA C22.2, UL
• Vacuum Pump Displacement Required: 144 L/Min or larger

The FreeZone Triad Freeze Dry Systems offer it all for lyophilization....stoppering tray dryer and sample freeze drying with four sample valves on the left side. Samples for both types of freeze drying can be run at once. The chamber pre-freezes samples to save money and time, eliminating the need for a separate freezer and product transfer. User-friendly controls enable you to start runs quickly and the microprocessor controls up to five different ramping and holding segments to meet different temperature protocols. The hot gas defrost allows for easy cleanup of up to 1.8 liters of water or 2.5 liters of ice. The built-in pneumatic stoppering mechanism doesn't require compressed gas and can handle glassware from 31mm to 148mm on its 12.4"w x 14.5"d shelf. Two 1/3 hp CFC-free and HCFC-free refrigeration systems cool the collector to -85C (-121F) to process low eutectic point samples including ones containing acetonitrile.

Product features:

• Sensor probe monitors sample temperature digitally
• Four sample valves increase the capacity and flexibility of the freeze dryer
• Built in pneumatic stoppering mechanism is included which does not require compressed gas
• Durable exterior of brushed stainless and glacier white epoxy-coated steel with blue accents
• Chamber pre-freezes samples to save time and money

Specifications:

• Condenser Temperature: -85°C (-121°F)
• Refrigeration System: Two 1/3 hp CFC-free and HCFC-free refrigeration systems
• Electrical: 230V, 60Hz, 12A
• Labconco No.: 7400040
• Dimensions, Overall: 72.4W x 74.9D x 71.1H cm (281/2 x 291/2 x 28")
• Dimensions, Processing Shelf: 31.5W x 36.8Dcm (1213/32 x 141/2")
• Dimensions, Shipping Weight: 204 kg (450 lbs.)