Used Lab Equipment

Specifications:

• Temperature Range: +40°C to +260°C
• Temperature Uniformity: ±3% at 100°C. Actual performance may vary depending on load,chamber size,sample placement,ambient temperature and environmental conditions.
• Controller: Microprocessor automatically optimizes control parameters during operation. Digital, single setpoint with simultaneous LED display of actual temperature vs. setpoint. May be configured to display temperature in °C and °F.
• Control Accuracy: ± 0.5% typical.
• High Limit Overtemp: Adjustable high temperature limit protection.
• Heating Elements: Long-life,low-watt density elements, enclosed and protected.
• Interior Construction: Corrosion resistant 304 brushed stainless steel.
• Exterior Construction: Triple-wall,heavy gauge steel with scratch-resistant finish,or stainless steel (see chart);door latch (adjustable) and rugged hinges.
• Insulation: Fiberglass,minimum 3" on all sides.Peripheral silicon door gasket to minimize heat loss.
• Ports and Vents: Adjustable intake bottom right side;exhaust top right side,1.0" (25.4 mm) diameter.
• Air Exchange: Intake port allows fresh air entry to establish gravity airflow pattern.
• Shelves: Two (2) open wire shelves,adjustable. All models include 16 shelf positions at 0.875" increments.Stainless steel exterior models have stainless steel shelves;others are nickel plated.Stainless steel (S models only).
• Electrical: 120V, 50/60 Hz
• Interior Dimensions(W X F-B X H in" (mm)): 19" (480) x 15" (380) x 18" (450)
• Exterior Dimensions(W X F-B X H in" (mm)): 29" (730) x 22" (560) x 31" (780)

Achieve higher temperature uniformity using these baths with a built-in circulating pump. Controller simultaneously displays set point and actual temperature for easy reference. Two independent overtemperature safety features protect your critical processes. The adjustable control interrupts the heating cycle at the user-set limit, flashes a visual warning, and automatically resets. 

Specifications:

• Reservoir Capacity: 5 L
• Maximum Temperature: 100 ° C
• Minimum Temperature: Ambient
• Temperature Stability: +/- 0.1 ° C
• Working Area Depth:5 in
• Bath Opening Width: 12 in
• Bath Opening Length: 18 in
• Heater Wattage: 1440W
• Temperature Sensor: 100 Ω
• Power Requirements: 115VAC, 60/60Hz

Specifications:

• Temperature range: 100-550°F
• Interior dimensions: 18” x 14” x 18” (W x H x D)

Description:

• A UV light blocking, dry environment with automatic electronic dehumidification
• The attractive design and sturdy construction of the Secador line of desiccator cabinets assures easy and reliable storage of moisture and light sensitive products.
• Patented electronic dehumidification system reduces humidity and circulates dry air automatically, freeing users from monitoring and changing desiccants
• Durastar™ co-polyester construction blocks 99% of UV light and resists staining, crazing and chemical attack
• Amber color models reduce visible light penetration by over 50% for storing light sensitive materials like reagents, analytical standards and investigational compounds
• Large doors with easy-to-view dial hygrometer maximize access to interior space and have a patented seal design, tab latches and security loops for a padlock or tamper-evident seals
• Perforated shelves facilitate circulation of dry air; Space for desiccant under bottom shelf
• U.S. Patents: 6,772,534; 6,834,920; 7,114,266; 7,318,630 and D474,626

Specifications:

• Temperature Range: 41° to 104°F (5° to 40°C)
• Voltage: 120 V
• Shelf Type: Vented adjustable shelves
• Material: Copolyester
• Color: Clear with Blue End Caps
• Shelves: 3
• Autoclavable: No
• Dimensions (L x W x H): 16.3 x 13.4 x 20.4 in. (41.4 x 34.1x 51.8 cm)
• For Use With (Application): Easy and reliable storage of moisture and light sensitive products, can be used with Scienceware™ desiccant cartridges, canisters or similar desiccant

Description:

• Reproducibility Of Cycle Times
• Uniformity Of PCR Yields For Samples
• Thin-Walled MicroAmp Reaction Tubes Allowing Efficient Heat
• Transfer and Improving Equilibration Times
• High Speed of Heating and Cooling
• Heated Cover Assuring That Tubes Fit Tightly In The Wells
• Oil-Free Operation

Specifications:

• Dimensions: 30.5 x 52 x 61 cm
• Weight: 40.5 kg
• Input: 120 VAC, 60 Hz
• Display: 40 Character Blue Luminescent Display
• Temperature Range: 4°C to 99.9°C

Features:

• BD CSampler- 96 well plate and 24 tube rack automated sampler for BD Accuri C6 flow cytometer  
• Blue and red laser
• Two light scatter detectors
• Optical filters such as FITC, PE, PerCP and APC
• A compact optical design, fixed alignment, and pre-optimized detector settings make the system easier to use
• Optional filters and the Selectable Laser Module expand the available fluorochrome combinations
• Compact system and portable weight (13.6 Kg)
• Intuitive interface of the software
• Measures: 11 x 14.75 x 16.5 inches (H x W x D) (27.9 x 37.5 x 41.9 cm)

A revolutionary design packed with features, the AE2000 sets a new benchmark in affordable inverted microscopy.

Motic’s new AE2000 Inverted Microscope is designed for routine live cell inspection with an easy and flexible set up, ideal for University, routine-clinical, and lab environments. The model’s main applications offer superior image quality when viewing cell cultures in microbiology, living organisms and tissue culture samples.

The newly designed Binocular Ergo tubes with 360° swiveling “butterfly” design offers the most comfortable observation position, especially useful for prolonged sample viewing. The auto on/off function of the power supply extends the lifespan of the sample and light bulb and at the same time saves energy. Another added feature, a modular interchangeable illumination concept, allows for the easy transition from Halogen to LED to fulfill a wide-range of customer viewing expectations. The improved phase contrast quality of the model makes the instrument suitable for a greater range of applications that demand precision optics.

The entire microscope including optical system is manufactured now completely Lead Free, following the International RoHS regulations.

Features:

• AE2000 Binocular Inverted Microscope with PL PH 20x
• Binocular head Siedentopf type 45° inclined
• Widefield high eyepoint eyepiece 10X / 20mm (paired), focusable
• Side facing quadruple nosepiece
• CCIS Plan Achromat objective PL PH4x, PL PH 10x, PL PH 20x
• ELWD N.A. 0.30 condenser
• Phase slider Ph0, BF, Ph1
• Centering telescope
• Plain Stage with metal & glass stage inserts
• Halogen illumination 6V/30W with intensity control
• 45mm blue, Green Interference and Diffusion filters with filter slider
• Allen hexagonal key, vinyl dust cover, power cord
• Universal Power Supply 100-240V

Features:

• Olympus BX60 Fluorescence Trinocular Microscope
• (2) WH10x-H/22 Eyepieces
• U-AC abbe condenser
• Mechanical Stage
• (2) 100W halogen lamphouses
• Objectives        
  • UplanFL 10x/.30
  • UPlanFL 20x/.50
  • UPlanFL 40x/ .75
  • UPlanFL 100x/ 1.30 Oil
• Reflective Cube

 Additional Objectives and Configurations Available.  Cameras are also available.

Includes Computer loaded w/ Image Lab Software

The ChemiDoc MP system is a full-feature instrument for gel or western blot imaging. It is designed to address multiplex fluorescent western blotting, chemiluminescence detection, and general gel documentation applications.

Its features are based on CCD high-resolution, high-sensitivity detection technology, and modular options to accommodate a wide range of samples and support multiple detection methods. The system is controlled by Image Lab software to optimize performance for fast, integrated, and automated image capture and analysis of various samples.

Features and Benefits

• Multiple imaging capabilities — the ChemiDoc MP imager can accommodate a variety of sample types and detection methods including multiplex fluorescent western blotting. It is the perfect imager to accompany your protein and DNA electrophoresis runs as well as your western blotting experiments. It delivers quantitative, reproducible results for fluorescence, chemiluminescence, and colorimetric detection
• Stain-free technology — UV-induced fluorescence labeling of proteins in the stain-free gels allows a 2 hr Coomassie gel-staining protocol to be condensed into a 5 min stain-and-image step. Stain-free gels are western blot compatible — using the V3 Western Workflow™, check your electrophoresis results and blot transfer quality prior to western blotting
• High-sensitivity blot detection — the ChemiDoc MP imaging system offers advanced detection technology that determines optimal exposure, even for faint or intense samples. Superior sensitivity is achieved for chemiluminescence and multiplex fluorescence detection and for colorimetric gel and blot documentation
• Superior Image Quality — exceptional dynamic range enables visualization of faint and intense bands on same blot or gel. Images are always in focus at any zoom level to ensure publication-ready images in seconds
• Ease of Use — precalibrated system provides the precise focus for any zoom setting or sample height; automated hands-free operation ensures consistent, reproducible, and high-throughput performance

Applications     

• Chemiluminescence: Yes
• Fluorescence: Yes
• Colorimetry/densitometry: Yes
• Gel documentation:Yes

Hardware Specifications        

• Maximum sample size: 28 x 36 cm
• Maximum image area: 26 x 35 cm
• Maximum image area: (For standard UV-excited gels) 25 x 26 cm
• Excitation source: Epi-white light and trans-UV (302 nm) are standard (optional 365 nm lamp available); optional trans-white conversion screen, XcitaBlue™ conversion screen, and epi-red, epi-green, and epi-blue LED modules available
• Illumination control: 8 modes available. Trans-UV, epi-white, and no illumination for chemiluminescence are standard; epi-red, epi-green, epi-blue, trans-white, and XcitaBlue conversion screens are optional
• Detector: Supercooled CCD
• Image resolution: 4 megapixels
• Pixel size (H x V): 6.45 x 6.45 µm
• Cooling system: Peltier
• Camera cooling temperature: -30°C absolute and regulated
• Filter holder: 6 positions (5 for filters, 1 without filter for chemiluminescence)
• Emission filters: 1 included (standard), 4 optional
• Dynamic range: >4.0 orders of magnitude
• Pixel density (gray levels): 65,535
• Dynamic flat fielding: Application specific; for all applications
• Instrument size (L x W x H): 36 x 60 x 96 cm
• Instrument weight: 32 kg

Operating Ranges       

• Operating voltage: 110/115/230 VAC nominal
• Operating temperature: 10–28°C (21°C recommended)
• Operating humidity, noncondensing: <70%

Automation Capabilities         

• Workflow automated selection: Application driven; user selected or recalled by a protocol
• Workflow automated execution: Controlled by a protocol via application-specific setup for image area, illumination source, filter, analysis, and reporting
• Workflow reproducibility: 100% repeatability via recallable protocols; from image capture to quantitative analysis and reports
• Autofocus (patent pending): Precalibrated focus for any zoom setting or sample height
• Image flat fielding**: Dynamic; precalibrated and optimizor every application
• Autoexposure: 2 user-defined modes (intense or faint bands)

Includes Computer loaded w/ Image Lab Software

The ChemiDoc MP system is a full-feature instrument for gel or western blot imaging. It is designed to address multiplex fluorescent western blotting, chemiluminescence detection, and general gel documentation applications.

Its features are based on CCD high-resolution, high-sensitivity detection technology, and modular options to accommodate a wide range of samples and support multiple detection methods. The system is controlled by Image Lab software to optimize performance for fast, integrated, and automated image capture and analysis of various samples.

Features and Benefits

• Multiple imaging capabilities — the ChemiDoc MP imager can accommodate a variety of sample types and detection methods including multiplex fluorescent western blotting. It is the perfect imager to accompany your protein and DNA electrophoresis runs as well as your western blotting experiments. It delivers quantitative, reproducible results for fluorescence, chemiluminescence, and colorimetric detection
• Stain-free technology — UV-induced fluorescence labeling of proteins in the stain-free gels allows a 2 hr Coomassie gel-staining protocol to be condensed into a 5 min stain-and-image step. Stain-free gels are western blot compatible — using the V3 Western Workflow™, check your electrophoresis results and blot transfer quality prior to western blotting
• High-sensitivity blot detection — the ChemiDoc MP imaging system offers advanced detection technology that determines optimal exposure, even for faint or intense samples. Superior sensitivity is achieved for chemiluminescence and multiplex fluorescence detection and for colorimetric gel and blot documentation
• Superior Image Quality — exceptional dynamic range enables visualization of faint and intense bands on same blot or gel. Images are always in focus at any zoom level to ensure publication-ready images in seconds
• Ease of Use — precalibrated system provides the precise focus for any zoom setting or sample height; automated hands-free operation ensures consistent, reproducible, and high-throughput performance

Applications     

• Chemiluminescence: Yes
• Fluorescence: Yes
• Colorimetry/densitometry: Yes
• Gel documentation:Yes

Hardware Specifications        

• Maximum sample size: 28 x 36 cm
• Maximum image area: 26 x 35 cm
• Maximum image area: (For standard UV-excited gels) 25 x 26 cm
• Excitation source: Epi-white light and trans-UV (302 nm) are standard (optional 365 nm lamp available); optional trans-white conversion screen, XcitaBlue™ conversion screen, and epi-red, epi-green, and epi-blue LED modules available
• Illumination control: 8 modes available. Trans-UV, epi-white, and no illumination for chemiluminescence are standard; epi-red, epi-green, epi-blue, trans-white, and XcitaBlue conversion screens are optional
• Detector: Supercooled CCD
• Image resolution: 4 megapixels
• Pixel size (H x V): 6.45 x 6.45 µm
• Cooling system: Peltier
• Camera cooling temperature: -30°C absolute and regulated
• Filter holder: 6 positions (5 for filters, 1 without filter for chemiluminescence)
• Emission filters: 1 included (standard), 4 optional
• Dynamic range: >4.0 orders of magnitude
• Pixel density (gray levels): 65,535
• Dynamic flat fielding: Application specific; for all applications
• Instrument size (L x W x H): 36 x 60 x 96 cm
• Instrument weight: 32 kg

Operating Ranges       

• Operating voltage: 110/115/230 VAC nominal
• Operating temperature: 10–28°C (21°C recommended)
• Operating humidity, noncondensing: <70%

Automation Capabilities         

• Workflow automated selection: Application driven; user selected or recalled by a protocol
• Workflow automated execution: Controlled by a protocol via application-specific setup for image area, illumination source, filter, analysis, and reporting
• Workflow reproducibility: 100% repeatability via recallable protocols; from image capture to quantitative analysis and reports
• Autofocus (patent pending): Precalibrated focus for any zoom setting or sample height
• Image flat fielding**: Dynamic; precalibrated and optimizor every application
• Autoexposure: 2 user-defined modes (intense or faint bands)

Features:

The Countess™ automated cell counter is a benchtop automated cell counter that performs cell count and viability measurements using trypan blue stain.

Specifications:

• User-friendly, benchtop design for simple, fast, automated cell count and viability measurements within a minute  
• Provides data on cell size and is compatible with a wide variety of eukaryotic cells without the need for any special changes between large or small sizes  
• Measures cell concentrations ranging from 1 × 104 to 1 × 107 cells/mL and cells with sizes ranging from 5 μm to 60 μm 
• Uses disposable counting chamber slides that eliminate washing steps and cross contamination between samples  
• Saves and prints cell count data including images using the Countess™ software and Countess™ USB drive  
• Presents comprehensive data with graphical reports and as a .CSV (comma separated value) file for sample comparisons  
• Allows you to gate and analyze cells based on cell size 

Single Laser Configuration

Includes Computer Loaded with Cytosoft Software

The guava easyCyte flow cytometry systems are cost-effective, easy to use and deliver complete and comprehensive cell analysis- right on your benchtop. The culmination of over a decade of flow cytometry expertise, these instruments consume less sample, generate less waste and are easier to use and maintain than traditional flow cytometers—all while providing the analytical power you need to expand your research horizons.

Features:

• Blue Laser
• Forward and Side Scatter
• Tube Sampling
• Automated 96 Well Micrplate Sampling
• Small Sample Size (<20 μL)
• Minimal waste (<50 mL per day)
• Detectors
  • Green
  • Yellow
  • Red

Fluidics Specifications:

• Flow Cell Dimension: Standard square capillary with ID of 100 µm
• Pump: Positive displacement
• Sheath Fluid: None
• Sample Flow Rate: 7µL/min to 72 µL/min
• Waste Generation: typically <40mL in 8 hours of continuous use
• Dead Volume: 50 µL (for 96-well microplate)
• Sample Requirement: as few as 2,000 cells/test; typically 25,000 – 100,000 cells
• Cell Size: 1-60 µm
• Typical # of Cells/Protocol: 1,000 – 10,000 cells/test