Used Lab Equipment

Specifications:

• Max operating gas temperature: 60°C
• Operating temperature range: 10°C - 30°C
• Gas flow rate: Heater inactive below 35 l/min flow rate, max flow 70 l/min Per Head
• Inlet gas pressure: Min: 2.0 bar (45 psi) Max: 5.3 bar (80 psi) Optimum: 5.0 bar (75 psi) at 70 l/min 
• Vertical travel: 80 mm (depends on plate height:

The Parker Balston® LC-MS NitroFlow Lab is a self-contained membrane nitrogen generator that produces LC-MS grade nitrogen with output pressure to 116 psig. Nitrogen is produced by utilizing a combination of compressors, care¬fully matched with filtration, and membrane separation technology components. Intake ambient air from the labora¬tory is filtered using an inlet suction breather filter to remove airborne organic and particulate impurities. This purified air is delivered to a long life low pressure air compressor which provides an air stream to hollow fiber membranes which subsequently separate the clean air into a concentrated nitrogen retentate and oxygen enriched permeate, which is then cycled through the system. Prior to exiting the system pure nitrogen retentate is delivered to a nitrogen amplification compressor to assure proper pressure, flow and purity to the LC-MS. The Parker Balston LC-MS NitroFlow Lab will deliver a continuous or on demand supply of pure nitrogen making it the smart alternative to cylinders. Superior engineering with carefully matched filtration, membrane separation and compression technologies have resulted in a system with the utmost reliability and longevity. Additional applications include: nebulizer gases, chemical and solvent evaporation, instrument supply and purge, evaporative light scattering equipment and sparging.

Specifications:

• Flow capacity to 32 LPM
• Includes 2 year compressor warranty
• Ideal for all derivatives of ESi and APCi modes
• Includes state-of-the-art, oil-less compressors
• Unlike PSA Hosmer technologies, membrane will not suppress corona needle discharge
• Special sound insulation design ensures quiet operation
• Weight: 200lbs
• Dimensions (H x W x D) [in]: 27.6 x 35.4 x 12.2 
• Maximum delivery pressure: 8 bar(g)/116 psig 
• Temperature: 10 to 35 °C / 50 to 95 °F 
• Air quality: Normal clean ambient air, relative humidity < 90%  
• Max. ambient relative humidity:  <80 % to 31°C, 50% at 40°C 
• Noise level: < 65 dB(A) @ 1 meter/3 ft 
• Heat dissipation: 1000 W (@50 Hz), 1200 W (@60 Hz) 3850 (50Hz)/4625 (60 Hz) BTU/hr 

Technical Specifications:

• Curtain Gas (Nitrogen): 12 L/min @ 80 psi
• Source Gas (Dry Air): 26 L/min @ 110 psi
• Exhaust Gas (Dry Air): 8 L/min @ 60 psi
• Max Gas Outlet Pressure: 110 psi
• Min Air Inlet Flow Rate: 90 L/min
• Min - Max Air Inlet Pressure: 120 - 145 psi / 8.3 - 10 bar
• Max Pressure Drop: 8 psi
• Min/ Max Operating Temperature: 5ºC - 30ºC / 41ºF - 86ºF
• Max Relative Humidity: 70%
• Particles: < 0.1μm
• Phthalates: None
• Dimensions (cm/ ins) WxDxH: 27 x 20 x 76 / 10.6 x 8 x 30
• Weight (kg/ lbs): 25 / 55

Features:

TECAN Freedom EVO 100-2 4 Tip AIR LIHA

Specifications:

• Tecan EVO 100-2
• 4 Tip
• AIR LIHA
• POSid3, Pick and Place Version 3
• Includes: PC, Flatscreen, UPS, and Evoware Software
• Does not include deckware, racks, or tips
• Leadtime: Up to 3 weeks
• Warranty: 6 Month Parts and labor

Specifications:

• Deck capacity: 54 tracks (T) , 45 SLAS ANSI positions
• Combinations allowed: Maximum of 9 carriers (6 T) holding 5 plates or tip racks or per carrier; multiprobe head can reach up to 7 carriers on the deck and 65 mm beyond the deck (on the left side)
• Positional accuracy: X-Y-Z positional accuracy of 0.1 mm
• Labware: All SLAS ANSI standard plate types up tp 1536 wells and most commercially available tube types
• Dimensions: 65.5 x 35.5 x 31.2” (1664 x 903 x 795 mm)

The MiniPrep can be equipped to perform repetitive laboratory procedures in a wide range of application areas:

• Nucleic Acid Extraction and Purification ( Solid Phase Extraction (SPE), or Magnetic Bead Separation (MBS) )
• Mother-Daughter Plate Replication
• ELISA Assays
• Immunophenotyping
• LC Injection
• Cell-Based Assays and Separations
• Protein Assays

Specifications:

• Pipetting Arms: 1 or 2
• Microplate Capacity Deck: 12
• Footprint: (W) 815 mm (32.1") x (D) 600 mm (23.6")x (H) 515 mm (20.3")(H does not include Z-rack)
• Probe Travel Range: (W) 643 mm (25.3") x (D) 300 mm (11.8")x (H) 165 mm (6.5") 
• Weight: ~46 kg (100 pounds)
• Input Voltages: Auto-selecting 110/230 VAC +/- 10%
• Frequency: 47 - 63 Hz
• Maximum Power: 250 Watts
• 384 Well MTP Support: Yes
• Diluter 1, 8 Channel: Yes
• Disposable Tip: Yes
• LC Injection: Yes
• Volume Range: 0.5 µL - 25.0 mL
• Syringe Sizes: 250 µL - 25.0 mL 
• Accuracy: <1% @ full stroke with 1.0 mL syringe*
• Precision: <0.05% CV @ full stroke with 1.0 mL syringe*
• Minimal Detectable Volume: 50 µL of ionic fluid in a 96 well flat bottom standard microplate format. A minimum 1 mm of ionic liquid level height is necessary for reliable liquid detection.
• Standard Software: Gemini Software for MiniPrep

*Accuracy and precision values determined using dilute salt solution (0.05 N NaCI). Liquid handling performance will differ depending on fluid type, tip type, tubing configuration and environmental conditions.

Description:

A Flexible pipetting workstation for cherry picking, dilutions, ADME/Tox, SPE, genomics and proteomics, 8-Tip MultiPROBE II systems enable pipetting into tubes, vials and microplates. A variety of tips and dispensing options allow MultiPROBE II systems to dispense volumes from 100 nL and up. Using VersaTip PLUS probe design, the MultiPROBE II can switch between fixed and disposable tips in one assay. WinPREP software offers visual drag-and-drop simplicity for creating and optimizing protocols from simple assays to vacuum filtration protocols, MALDI spotting, device integration and more.

Features:

The Thermo Scientific Matrix PlateMate is designed for medium to high throughput liquid handling applications, with walk away capability via four integrated stackers and optional Tip Tower accessory. The Matrix PlateMate Plus is compatible with eight interchangeable pipetting heads with a combined volume range of 0.1μl -300μl, making the unit compatible with a wide range of liquid handling tasks. Well suited applications include plate stamping, reformatting and pooling to 384 and 1536, plate filling and serial dilutions in research, screening, and production environments.

Specifications:

• Length: 52 in/ 1324 mm
• Depth: 16 in/ 411mm
• Height:
  • 25 Plate Stackers 29 in/ 721 mm
  • 50 Plate Stackers 41 in/ 1041 mm
• Weight: 180lbs/ 80kg
• Power: 50/60Hz, 100~240 V, 100VA
• Maximum Power Consumption: <150W
• Operating Conditions: +15°C- 40°C <85% RH at +30°C
• Interface: RS232c

The Precision 2000 Automated Microplate Pipetting System is an accurate and precise liquid handling system capable of automating most routine pipetting, dispensing, and diluting applications. Ideal for a flexible and versatile automated system with its small footprint, it has proven to be very capable of low-volume pipetting (1 µl) to accommodate today’s low assay volumes.

The flexibility and mobility of this system also allows for many of the manual pipetting tasks required for microarray spotting to be automated.

Features:

• High and Low Temperature Alarms
• Digital temperature Display 

Specifications:

• Evaporation Rate: 7 Liters/Daily
• Capacity: 336 Liters
• Electrical Requirements: 115/125 vac 50/60 Hz
• Inner Diameter: 31"
• Inner Usable Height: 27"
• External Dimensions: 33"w x 39"d x 40"h 

Features:

Eagle's 24 Gallon, Manual-Closing, Space Saver Safety Cabinet is constructed of 18-gauge steel. The sides, top, bottom, and doors are double-walled with a 1 1/2" air space between walls. Includes two vents, each have 2" threaded fittings and fire baffle and cap. Standard Flammable Liquid Safety Cabinets come in yellow high gloss powder finish with red warning, plus grounding attachment, 3-point latch system, and 2" raised, leakproof door sill. Each shelf is adjustable, supported by 4 brackets, and can support 350 pounds. (All Eagle metal cabinets meet NFPA Code 30 and OSHA requirements).

Specifications:

Capacity: 24 gal. (90.9 L).

Color: Yellow

Door Style:Manual Close

Inside Dimensions: 20"W x 15"D x 62"H (50.8 x 38.1 x 157.5 cm)

Lock:True

Number of Shelves: 3

Shelf Depth:14 3/4" (37.5 cm)

Shelf Model Number: 1919

Uniform Fire Code: False

Dimensions

Width :23" (58.5 cm)

Depth :18" (45.8 cm)

Height: 65" (165.1 cm)

Weight: 224 lbs.

Features:

Liquid sample storage;Wide neck opening;Lowest liftover height;Largest LN2 capacity

Specifications:

Maximum Storage Capacity

• 1.2 & 2 ml Vials (Internally Threaded): 5,200
•  Quantity of Large Racks 100 cell boxes: 4
•  Quantity of Mini Racks 25 cell boxes: N/A
•  Number of Shelves per Rack: 13
• High Security Straw Capacity (0.5 ml): 19,320
•  Number of Canisters (73 mm): 23
•  Goblets/Canister : Straws/Goblet: 5:168

Performance

•   • LN2 Capacity w/o Inventory : 95 L

Unit Dimensions

•   Neck Opening: 16.0" (406 mm)
•   Useable Internal Height: 28.9" (735 mm)
•   Inner Diameter: 16.0" (406 mm)
•   Overall Height: 46.3" (1176 mm)
•   Door Width Requirement: 23.6" x 22.7" (601 x 577 mm)
•   Weight Empty: 195 lb. (88 kg)
•   Weight Full* (liquid) est.: 365 lb. (166 kg)

Blood Bag Capacities   

•   791 OS/U Medsep (25 ml) - total bags: 539
•   4R9951 (50 ml)  - total bags: 228 - Bags/Frame: 6 - No. Frames: 38
•   4R9953 (250 ml)  - total bags: 128 - Bags/Frame: 4 - No. Frames: 32
•   4R9955 (500 ml)  - total bags: 96 - Bags/Frame: 4 - No. Frames: 24
•   DF200 (200 ml)  - total bags: 80 - Bags/Frame: 4 - No. Frames: 20
•   DF700 (700 ml)  - total bags: 40 - Bags/Frame: 4 - No. Frames: 10

Description:

This state-of-the-art Cryogenic System can be used in either liquid or vapor phase. Worthington Industries K SERIES Cryostorage Systems are designed for applications where extremely low temperature storage of biological products is required. They are also appropriate for industrial or other applications where liquid nitrogen temperatures and high capacity are needed. The K SERIES style refrigerator is designed for, but not limited to, the laboratory environment. The standard model is equipped with a Worthington Industries approved electronic liquid level controller that will monitor and control the supply of liquid nitrogen to the unit.

Specifications:

• Static Holding Days: 52
• Evaporation Rate (liters/days): 7.0
• Liquid Nitrogen Capacity - liters: 365
• Weight Empty (lbs): 405
• Weight Empty (kg): 184
• Weight Full (lbs): 1046
• Weight Full (kg): 474
• Neck Diameter (in): 31.0
• Neck Diameter (mm): 787
• Overall Height (in): 44.0
• Overall Height (mm): 111.8
• Overall Dimensions (in): 34.0 x 38.5
• Overall Dimensions (mm): 864 x 965
• Usable Height - Internal (in): 29.0
• Usable Height - Internal (mm): 737
• Internal Diameter (in): 31.0
• Internal Diameter (mm): 787
• 2ml Plastic Vials: 24050
• Number of 100/81 Cell Racks: 17
• Number of 25 Cell Racks: 6
• Number of Shelves: 13
• Shape: Square
• Dimensions: 3x3 in (76x76mm)
• Vials per Box: 25
• Number of ½ cc straws - (10 per goblet, 2-13mm goblets per can): 59,400
• Roller Base: Included
• Bag 50 ml (7 Level Rack): 805
• Bag 250 ml (5 Level Rack): 535
• Bag 500 ml (5 Level Rack): 475

Description:

The Worthington Industries High Capacity (HC) Series of cryogenic refrigerators is designed for long-term storage of biological material at liquid nitrogen temperature. Seven different models offer a variety of choices between sample storage capacity and holding time, while offering easier access to stored materials due to larger neck openings. Applications range from industrial to laboratory, biological and non-biological material. A low profile (12HCL) model is available for applications where a shorter unit is needed.

Specifications:

• Static Holding Days: 130
• Working Time Days: 81
• Evaporation Rate (liters/days): 0.27
• Liquid Nitrogen Capacity - liters: 35
• Weight Empty (kg): 17.2
• Weight Empty (lbs): 37.9
• Weight Full (kg): 45.5
• Weight Full (lbs): 100.2
• Neck Diameter (in): 4.7
• Neck Diameter (mm): 119
• Overall Height (in): 26.8
• Overall Height (mm): 681
• Overall Diameter (in): 18.8
• Overall Diameter (mm): 478
• Number of Cannisters: 6
• Canister Dimensions (in): 3.7x11
• Canister Dimensions (mm): 94x279
• Number of 1.2 ml & 2.0 ml vials (5/cane): 1050
• Number of 1.2 ml & 2.0 ml vials (6/cane): 1260
• Number of ½ cc straws - (10 per cane): 3000
• Number of ½ cc straws (Bulk - 1 level): N/A
• Number of ½ cc straws (Bulk - 2 levels): 9900
• 7th Canister: 366840
• Roller Base: 366783
• Cryo-Sentry Level Alarm: 366833