Used Lab Equipment

Features:

Ensure stable baselines and consistent detector performance. The Solvent Racks Solvent Racks with Degassers for UltiMate 3000 Pumps (SRD-3200, -3400, and -3600) incorporate a low-volume (670µL), chemically-inert degasser with two, four, or six channels, respectively.

 Includes:

• Dionex Ultimate 3000 HPLC LPG-3000 Pump
• Dionex Ultimate 3000 HPLC  VWD-3000 UV Detector
• Dionex Ultimate 3000 HPLC  FLM-3000 Column compartment
• Dionex Ultimate 3000 HPLC WPS-3000 Autosampler
• Dionex Ultimate 3000 SRD-3600 Flow Manager
• Computer loaded w/ Software

Specifications:

• Temperature range: 5 °C to 85 °C (max. 18 °C below ambient)
• Temperature accuracy: ±0.5 °C
• Temperature stability: ±0.1 °C Temperature precision: ±0.1 °C
• Column capacity: Up to 6 columns, max. 30 cm length
• Heatup time: Typically 15 minutes 20 °C to 50 °C Cooldown time: Typically 18 minutes 50 °C to 20 °C
• Control: All functions software controlled via USB
• I/O interfaces: 2 digital inputs, 2 programmable relay outputs

Specification:

• Temperature Range: 5 °C to 85 °C (max. 18 °C below ambient)
• Temperature Accuracy: ±0.5 °C
• Temperature Stability: ±0.1 °C
• Temperature Precision: ±0.1 °C
• Column Capacity: Up to 6 columns, max. 30 cm length
• Heat-up Time: Typically 15 minutes 20 °C to 50 °C
• Cooldown Time: Typically 18 minutes 50 °C to 20 °C
• Control: All functions software controlled via USB
• I/O interfaces: 2 digital inputs, 2 programmable relay outputs
• Switching valves: 1 or 2 thermostatted valves (2-position, 6-port, 2-position, 10-port, or 6-position, 7-port)

• Watted parts

• Stainless steel (1.4571, 316L), PEEK; Waste line: PTFE
• Column switching valve (stainless steel): Vespel and DuraLife
• Column switching valve (biocompatible): PEEK
• Column switching valve (6-position, 7-port): Titanium
• Safety features: Humidity sensor and gas sensor. Temperature control and temperature sensors

• User input/display

• LCD-indicating system parameters
• Standby button
• 3 LEDs for status monitoring (Power, Connected, Status)
• 4 function keys for operation during initial installation and maintenance
• GLP features: Electronic identification system for 4 columns. In Chameleon: Full support of automatic equipment qualification (AutoQ) and System System Wellness monitoring. All system parameters are recorded in the Chromeleon Audit Trail.
• Power requirements: 100 - 120 V, 60 Hz; 200 - 240 V, 50 Hz, max. 150 VA
• Environmental conditions: Indoor use only; 10 to 35°C (50 to 95°F) operating temperature range; 80% relative humidity (non-condensing); Overvoltage category 2; Pollution degree 2.
• Dimensions (H x W x D): 17 x 42 x 51 cm (6.7 x 16.5x 20 in)  
• Weight: 13.2 kg (29.0 lbs)

Specification:

• Temperature Range: 5 °C to 85 °C (max. 18 °C below ambient)
• Temperature Accuracy: ±0.5 °C
• Temperature Stability: ±0.1 °C
• Temperature Precision: ±0.1 °C
• Column Capacity: Up to 6 columns, max. 30 cm length
• Heat-up Time: Typically 15 minutes 20 °C to 50 °C
• Cooldown Time: Typically 18 minutes 50 °C to 20 °C
• Control: All functions software controlled via USB
• I/O interfaces: 2 digital inputs, 2 programmable relay outputs
• Switching valves: 1 or 2 thermostatted valves (2-position, 6-port, 2-position, 10-port, or 6-position, 7-port)

• Watted parts

• Stainless steel (1.4571, 316L), PEEK; Waste line: PTFE
• Column switching valve (stainless steel): Vespel and DuraLife
• Column switching valve (biocompatible): PEEK
• Column switching valve (6-position, 7-port): Titanium
• Safety features: Humidity sensor and gas sensor. Temperature control and temperature sensors

• User input/display

• LCD-indicating system parameters
• Standby button
• 3 LEDs for status monitoring (Power, Connected, Status)
• 4 function keys for operation during initial installation and maintenance
• GLP features: Electronic identification system for 4 columns. In Chameleon: Full support of automatic equipment qualification (AutoQ) and System System Wellness monitoring. All system parameters are recorded in the Chromeleon Audit Trail.
• Power requirements: 100 - 120 V, 60 Hz; 200 - 240 V, 50 Hz, max. 150 VA
• Environmental conditions: Indoor use only; 10 to 35°C (50 to 95°F) operating temperature range; 80% relative humidity (non-condensing); Overvoltage category 2; Pollution degree 2.
• Dimensions (H x W x D): 17 x 42 x 51 cm (6.7 x 16.5x 20 in)  
• Weight: 13.2 kg (29.0 lbs)

Specifications:

• Optical design: Dual-beam photometer
• Light source: Deuterium lamp and tungsten lamp
• Wavelength range: 190 to 900 nm
• Wavelength accuracy: ± 1 nm
• Wavelength repeatability: y: ± 0.1 nm
• Optical bandwidth: 6 nm at 254 nm

Specifications:

• Sample capacity: Dependent on the carousel configuration: Vials/ Well plates
• Injection methods: Inline split-loop
• Injection volume settable range: 0.01 – 100 µL (1 – 100 µL)
• Injection volume accuracy: Typically ±0.5% at 50 and 90 µL
• Minimum sample required: 1 µL out of 5 µL (250 µL conical vial)
• Injection cycle time: <15 seconds for 5 µL

Specifications:

• Sample capacity: Dependent on the carousel configuration: Vials/ Well plates
• Injection methods: Inline split-loop
• Injection volume settable range: 0.01 – 100 µL (1 – 100 µL)
• Injection volume accuracy: Typically ±0.5% at 50 and 90 µL
• Minimum sample required: 1 µL out of 5 µL (250 µL conical vial)
• Injection cycle time: <15 seconds for 5 µL

Operate at temperatures up to 110°C with no compromise in precision or accuracy. The Thermo Scientific Dionex UltiMate TCC-3000RS Rapid Separation Thermostatted Column Compartment enables the use of high column temperatures for ultrafast and conventional liquid chromatography (LC) applications to reduce system back pressures and run times. Dispersion-reduced precolumn heating and postcolumn cooling technology ensures optimal separation, run time, and detection under challenging conditions. These low-volume cooling and heating components can be easily exchanged to optimally match column flow and mobile phase requirements.

Specifications:

• Temperature Range:5°C - 110°C
• Temperature Accuracy:+/- 0.5°C
• Recommended Eluent Preheater Volume:2 uL
• Cool Down Time:15 min
• Maximum Column Length: 30 cm
• Column Capacity:12
• Weight: 9 kg
• Power Requirements:150V
• Pressure Capacity: 125 MPa

Features:

• Constructed of 1" multi-ply exterior-grade plywood. Will not rust or corrode.
• Under The Counter cabinets fit under laboratory casework or as stand alone units
• Bright blue finish for immediate identification
• Unique all wooden door hinge
• Cabinet floor constructed as a 2" liquid tight trough
• Corrosive cabinet with a plastic hasp and padlock
• Interior floor and shelf are lined with polypropylene plastic
• Built in toe-kick 1-3/4" deep x 2-1/2" high
• Cabinets designed to support standard laboratory fume hoods (not supplied with work surface)
• Large Corrosive labels for easy identification
• One fixed position shelf

Specifications:

• Width Inches: 29
• Depth Inches: 22 
• Height Inches: 35-1/2
• Capacity: (28) 2.5 Liter Bottles
• Capacity Gallons: 18.5

• Specifications:

• Dimensions: 30 x 24.5 x 34”
• Weight:
• Operating temperature:
• Injector volume: 20uL standard, 5uL, 50uL, 100uL, 200uL, 500uL, 1.0mL, 2.0mL, 5.0mL, 10mL
• Syringe sizes: 1.0mL standard, 250uL, 500uL, 2.5 mL, 5mL, and 10mL
• Syringe delivery accuracy: >99% at full stroke with a 1.0mL syringe

Description:

Single Path Monitor UV-1 is a dual beam flow through UV absorptiometer for monitoring the UV absorption of a flowing liquid at 254nm, 280 nm, or 405 nm, comes with the UV-1 control unit, optical unit, one 280 nm wavelength filter and one 280 nm converter, and with a flow cell with optical path length of either 3 mm or 10 mm.

Description:

The Dynamax UV-DII absorbance detector measures absorbance alternately at first and second wavelengths. When a measurement is made at one wavelength, a projection is made, based on past measurement, of the value of absorbance at the other wavelength. A ratio is taken of the measured value at one wavelength with the projected absorbance at the other wavelength

Specifications:

• Power: 100V/120V/220V/240V
• Hz: 50-60Hz
• Fuse: 5ASB/100/120V, 1.25ASB/220/240V

Specifications:

Noise: ±1 × 10–5 AU (254 nm, 2.0 s response time)
Drift: 2× 10–4 AU/h
Response Time: 0.1/0.2/0.5/1/2/5/10 s
Wavelengths: Up to four simultaneously, user-selectable
Wavelength Range and Accuracy: 190–740 nm, ± 2nm
Bandwidth: <8 nm
Flow Cell Volume: Nano LC, 3 nL volume; Capillary LC, 45 nL volume; Micro LC, 180 nL volume
Maximum Cell Pressure: 400 bar (6000 psi)
Lamp: Deuterium
Data Collection Rate: 1–10 Hz
Analog Output: 2×1 V
Dimensions (h × w × d): 16 × 42 ×51 cm (6.3 ×16.3 × 20 in.)
Weight: 10.5 kg (23 lb)

Features:

Thermo Scientific Revco UxF Series deliver a range of features including:

More Samples, Less Freezer Footprint: maximize sample storage capacity while minimizing the freezer's physical space inside the lab

Performance: features an outstanding BTU (British thermal unit) reserve. This leads to fast door recovery times so that sample integrity isn't compromised

Energy-Efficiency: allow you to save up to 15% in energy usage with the energy-savings mode‡ or choose the high-performance mode for applications requiring ultra-tight temperature uniformity—all through an easy-to-use, touch-screen interface

Sample Storage Capacity: available in five sizes, featuring outstanding capacity per footprint specifications

Specifications:

• Temperature Range: -122.8°F
• Holds:400 Boxes
• Voltage: 208 - 230 V
• Amperage:’ 12 A
• Dimensions (D x W x H) Interior: 28.29 x 23.13 x 51.25 in. (71.85 x 58.74 x 130.11 cm)
• Weight (Metric): 332 kg
• Shelves: 2
• Capacity (Metric) Shelf: 73.4 kg
• Exterior Finish: Painted
• Includes: Sliding drawer rack
• Operating Modes: High Performance or Energy Efficiency
• Warm up Time -80 C to -50C: 225 min.
• Surface Area (English): 8.46 sq. ft.
• Depth (English) Interior: 28.29 in.
• Height (English) Exterior: 78 in.
• Height (Metric) Exterior: 198.1 cm
• Width (English) Interior: 23.13 in.
• Width (English) Exterior: 32.4 in.
• Depth (English) Exterior: 37.6 in.