Used Lab Equipment

Used Lab Equipment

We offer an assortment of refurbished and used Spectrometers / Spectrophotometers ranging from Spectrofluorometer, Fluorescence, Atomic Absorption (AA), ICP, to UV / Vis / NIR Spectrometers and Microplate. Some of our popular manufacturers include Beckman, Perkin Elmer, HP, Hitachi, Varian and Bio-Tek. We have one of the largest inventories of Mass Spectrometers available. We also offer service contracts, installation and training. Browse our inventory of used mass spec products below.

Mark 3 Moisture Analyzer: 31-42 of 42

*Please Select a Category and/or Manufacturer dropdown OR Search By Model Name, # or Keyword.* Advanced Search >
Thermo Cryoplus 3 Cryo Storage Tank

Thermo Cryoplus 3 Cryo Storage Tank

Cambridge ID #: 20590

Low-profile storage tanks combine liquid nitrogen storage reliability with microprocessor technology

 

Microprocessor Control

  • Precise liquid level control with over 16 parameters; with autofill system
  • Control panel is mounted on top for convenient access and easy touchpad programming
  • Digital temperature display sensor is located under the lid; this indicates the highest temperature reading inside the tank
  • 24 tricolor LEDs continuously display actual liquid nitrogen level and high-level/low-level setpoints
  • Alarm contacts for remote monitoring of storage tank conditions

Durable Construction

  • Low-profile tank with vacuum-insulated, stainless-steel chamber Counterbalanced lid with foamed-in-place, high density polyurethane insulation; dedicated vent; 100% clearance Two independent, flexible lid gaskets reduce moisture migration into the chamber
  • Liquid level sensor and fill port within vacuum space, for maximum storage and sensor protection
  • Front-mounted key lock and rear-mounted recessed power switch; control panel can also be locked
  • Temperature sleeve (included) provides colder temperatures and efficient vapor phase operation
  • Heavy-duty casters

 

Specifications:

  • Product Type: Vessel, Storage
  • Capacity: 40L
  • Metric Capacity: 340L
  • Dimensions (L x W x H) Exterior: 5 x 34.5 x 41in. (105.4 x 87.6 x 104.1cm)
  • Certifications: UL
  • Electrical Requirements: 100/120V 50/60Hz
  • Voltage: 100/120V
  • Hertz: 50/60Hz
  • Metric Weight: 7kg
  • English Weight: 416 lb.
  • Metric Shipping Weight: 249kg
  • English Shipping Weight: 550 lb.
  • Metric Interior Depth: 9cm
  • English Interior Depth: 5 in.
  • Metric Exterior Length: 4cm
  • English Exterior Length: 5 in.
  • Metric Exterior Width: 6cm
  • English Exterior Width: 5 in.
  • Exterior Metric Height: 1cm
  • English Exterior Height:
  • Metric Outside Diameter: 7cm
  • English Outside Diameter: 31 in.
  • Exterior Metric Dimensions: 4 x 87.6 x 104.1cm
  • Exterior English Dimensions: 41.5 x 34.5 x 41 in.
  • Spot Count: 24000.0
Learn More
Thermo-Cryoplus-3-Cryo-Storage-Tank-20590
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Leica DMLB Inverted Phase Contrast Fluorescent Microscope

Leica DMLB Inverted Phase Contrast Fluorescent Microscope

Cambridge ID #: 18371

Description:

The LEICA DM LB offers exemplary stability as a research grade microscope, particularly for photomicrography or digital imaging. Recognized as a leading microscope for pathology, biology, botany, neuroscience and aquatic studies the LEICA DM LB can be equipped to handle any imaging task.

Specifications:

  • Head: Trinocular w/ C-Mount Adapter
  • Eyepieces: 10x Superwidefield 25mm
  • Nosepiece: 6 Position
  • Focusing: Coaxial coarse & fine adjustment
  • Stage: Graduated mechanical XY stage
  • Objectives: PL Fluotar 10x Phase, PL Fluotar 20x, PL Fluotar 40x, PL Fluotar 100x Oil, C Plan 40x Phase, C Plan 100x Oil Phase
  • Condenser: 5 Position Phase Turret
  • Polarizer/Analyzer: Slide in Analyzer, Drop in Polarizer
  • Light Source: 12v 100W Halogen
Learn More
Leica-DMLB-Inverted-Phase-Contrast-Fluorescent-Microscope-18371
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Virtis ES-53 Freeze Dryer

Virtis ES-53 Freeze Dryer

Cambridge ID #: 21728

Features:

The GPFD- General Purpose Freeze Dryer is available in 25 and 35 Liter configurations. Condenser refrigeration packages of -53 or -85C allow you to configure the most economical system for your products. The GPFD is available in 2 to 5 shelf configurations with optional programmable heat. 

The GPFD is ideal for bulky products such as artifacts/documents where low energy input is required and long freeze-drying cycles are common. It is also ideal for large quantities of very low moisture products.

  • Mobile, free-standing design
  • Choice of refrigeration systems with temperatures of -53 or -85C
  • 2 to 5 shelves
  • Intellitronics Controller to monitor your cycle from anywhere you receive email

Benefits:

  • Mid-cycle defrost option for drying larger items
  • Visually monitor product progress through acrylic door
  • Large batch processing in a single run with 25 or 35-liter condenser capacity
  • Accommodate a wide variety of product solvents with temperatures to -85C
  • Long equipment life, chamber configured of 304 stainless steel
  • Easy install

Specifications:

    • Maximum low condenser temperature (°C): -53°C
    • Condenser capacity in 24 hrs: 14 L
    • Condenser capacity total: 25 L
    • Condenser surface area: 506 in² (3264 cm²)
    • Construction: 304 stainless steel chamber and condenser

 

Learn More
Virtis-ES-53-Freeze-Dryer-21728
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Thermo Exactive LC/MS Trap System

Thermo Exactive LC/MS Trap System

Cambridge ID #: 21289
"

Includes Computer loaded w/Xcalibur LC Devices 2.2.0 SP1

 

Powered by patented Thermo Scientific Orbitrap technology, the Exactive provides fast, sensitive, reliable, and confident detection and identification of compounds in complex mixtures while maintaining full compatibility with U-HPLC and fast chromatography. The Exactive benchtop mass spec is based on an API ion source combined with a stand alone Orbitrap mass analyzer. The combination of Orbitrap technology with linear ion trap has become an established platform for high resolution, accurate mass LC/MSn analysis of complex mixtures. Several key applications are ideally suited to the use of the Exactive MS, such as:

 

  • Exact mass measurements of organic compounds
  • Early drug discovery metabolism and pharmokinetics (DMPK)
  • General unknown screening
  • Multiple residue analysis (Pesticides, Mycotoxins, veterinary drugs)
  • Metabolomics

 

Orbitrap Mass Analyzer

  • Gas (nitrogen) filled C-Trap
  • Highly efficient ion transfer optics to Orbitrap analyzer
  • Straight multipole collision cell for HCD (optional)
  • Orbital trap with 5 kV central electrode voltage
  • Low-noise image current pre-amplifier 16-bit signal digitization
  • Ultra fast real-time data acquisition and instrument control system
  • Fully automated calibration via instrument control software

 

Specifications:

  • Mass Range: m/z 50 - 4000
  • Resolution: 100,000 at m/z 200 at a scan rate of 1 Hz, minimum resolution 10,000 at m/z 200 at a scan rate of 10 Hz
  • Mass Accuracy: < 5 ppm with external calibration, < 2 ppm using internal calibration
  • Polarity Switching: One full cycle in < 1 sec (one full scan positive mode and one full scan negative mode at resolution setting of 10,000)
  • Sensitivity: A flow injection of 500 fg of Buspirone giving a S/N of better than 10:1 for the selected mass chromatogram of the [M+H]+ ion (m/z = 386.2551)
  • Dynamic Range: > 4,000 within a single scan with guaranteed specified mass accuracy
  • MS Scan Power: Full scan and ‘All Ion Fragmentation’ by HCD
  • Scan Rate: 1 - 10 Hz
  • Analog Inputs
    • One (1) analog input (0 - 1 V),
    • One (1) analog (0 - 10 V)
"
Learn More
Thermo-Exactive-LC-MS-Trap-System-21289
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
BD BioScience FacsCanto II - 3 Laser Flow Cytometer

BD BioScience FacsCanto II - 3 Laser Flow Cytometer

Cambridge ID #: 12160

The BD FACSCanto system breaks new frontiers in flow cytometry by providing an efficient, easy-to-use yet powerful six-color benchtop analyzer. It incorporates many technology advances first developed in the BD LSR II expandable analyzer and the BD FACSAria cell sorter. It supports a broad range of research applications, being particularly suited for rare event analysis with its high speed, great sensitivity, and minimal sample-to-sample carryover.

 

The BD FACSCanto system combines a patented optical design for enhanced signal retention on six fluorescent and two scatter parameters, digital electronics for processing up to 10,000 events per second, and a novel sample injection tube supporting carryover of less than 0.1%. Your total benefit consists of the best fluorescence sensitivity to resolve dim events, cleaner data due to minimal sample contamination, and rapid processing rates, preserving valuable time for science. BD FACSCanto performance overcomes obstacles in rare event analysis and in functional studies for low detection ranges.

 

Includes:

  • Computer w/ FacsDiva Software
  • Fluids Cart
  • 2 laser, Blue(488) and Red (633)
  • Laser
  • 6 PMTs unit and side scatter
  • All Necessary Cables
  • Manuals

 

Optics Specifications:

  • Lasers
    • Air-cooled:
    • 488-nm solid state, 20-mW laser output
    • 633-nm HeNe, 17-mW laser output
  • Laser Configuration: Spatially separated beams with 9 x 65-μm elliptical spots
  • Optical Alignment Procedure: Fixed, no operator alignment required
  • Flow Cell: 180 x 430-μm rectangular quartz flow cell
  • Collection Optics: Optical-gel coupled 1.2 NA lens
  • FSC Resolution: 0 μm
  • SSC Resolution: 5 μm
  • Fluorescence Detector Design: Reflective optics with single transmission filter in front of each PMT
  • FSC Detector: Photodiode with 488/10 BP
  • SSC Detector: PMT with 488/10 BP
  • Fluorescence Detectors: 6 PMTs in 4-2 standard configuration
  • Blue Laser Dyes
    • FITC, PE, PerCP or PerCP-Cy™5.5,
    • PE-Cy7 (525, 575, 678 or 695, 785 nm)
  • Red Laser Dyes: APC, APC-Cy7 (660, 785 nm)
  • Detector Bands
    • Blue Laser: 530/30; 585/42; >670; 780/60 nm
    • Red Laser: 660/20; 780/60 nm
  • Fluorescence Threshold Sensitivities: FITC <100 MESF; PE <50 MESF
Learn More
BD-BioScience-FacsCanto-II---3-Laser-Flow-Cytometer-12160
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
BD BioScience FACSCanto II 2 Laser Flow Cytometer

BD BioScience FACSCanto II 2 Laser Flow Cytometer

Cambridge ID #: 17183

The BD FACSCanto system breaks new frontiers in flow cytometry by providing an efficient, easy-to-use yet powerful six-color benchtop analyzer. It incorporates many technology advances first developed in the BD LSR II expandable analyzer and the BD FACSAria cell sorter. It supports a broad range of research applications, being particularly suited for rare event analysis with its high speed, great sensitivity, and minimal sample-to-sample carryover.

 

The BD FACSCanto system combines a patented optical design for enhanced signal retention on six fluorescent and two scatter parameters, digital electronics for processing up to 10,000 events per second, and a novel sample injection tube supporting carryover of less than 0.1%. Your total benefit consists of the best fluorescence sensitivity to resolve dim events, cleaner data due to minimal sample contamination, and rapid processing rates, preserving valuable time for science. BD FACSCanto performance overcomes obstacles in rare event analysis and in functional studies for low detection ranges.

 

Includes:

  • Computer w/ FacsDiva Software
  • Fluids Cart
  • 2 laser, Blue(488) and Red (633)
  • 3 PMTs in 4-2 configuration w/ side scatter
  • All Necessary Cables
  • Manuals

 

Optics

Lasers

  • Air-cooled
  • 488-nm solid state, 20-mW laser output
  • 633-nm HeNe, 17-mW laser output
  • Laser Configuration: Spatially separated beams with 9 x 65-μm elliptical spots
  • Optical Alignment Procedure: Fixed, no operator alignment required
  • Flow Cell: 180 x 430-μm rectangular quartz flow cell
  • Collection Optics: Optical-gel coupled 1.2 NA lens
  • FSC Resolution: 1.0 μm
  • SSC Resolution: 0.5 μm
  • Fluorescence Detector Design: Reflective optics with single transmission filter in front of each PMT
  • FSC Detector: Photodiode with 488/10 BP
  • SSC Detector: PMT with 488/10 BP
  • Fluorescence Detectors: 6 PMTs in 4-2 configuration w/ side scatter
Learn More
BD-BioScience-FACSCanto-II-2-Laser-Flow-Cytometer-17183
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Gilson FC204 HPLC Fraction Collector

Gilson FC204 HPLC Fraction Collector

Cambridge Scientific ID #'s: 21036, 20237

Specification:

 

  • 3-way valve: Three-port, PTFE, 67 µL internal volume. 3,5 µL dead volume from the common port to the normally closed port, up to 20 mL/min with large bore needle OR Three-port, PTFE, 114 µL internal volume. 6 µL dead volume from the common port to the normally closed port, up to 200 mL/min with large bore needle.

 

  • Contact control

 

    • Contact closure inputs for start/advance and end/home
    • Event mark output
    • One programmable output for control of peripheral devices
  • Data acquisition: An input channel for analog-to-digital conversion; digital data is transmitted on the GSIOC
  • Detector input: ±100 mV full scale
  • Display: two lines of 24 alphanumeric characters; backlit LCD
  • Drop counting: Up to 9999 drops per fraction. Maximum rate: 20 drops per second

 

  • Environmental conditions

 

    • Indoor use only
    • Up to 2000 meters altitude
    • 5° - 40°C temperature range
    • 75 - 105 kPa air pressure
    • Pollution degree 1 or 2 in accordance with IEC 66
    • Maximum relative humidity 80% for temperatures up to 31°, decreasing linearly to 50% relative humidity at 40°C.
  • Event marker: 100 ms pulse (contact closure)
  • Maximum collection volume/tube: 32 mL (18 x 180 mm tube) or 25 mL (18 x 150 mm tube)
  • Maximum fractions: up to 768 fractions when configured with eight 96-well, 2 mL Whatman/Plyfiltronics microplates on a Code 17 rack
  • Multi-cycle operation: repetitive collection of each sample into same set of tubes or collection each sample into different set of tubes
  • Multiple column collection: simultaneous collection from up to 18 columns with installation of optimal multiple column adapter(s).
  • Number of racks: One Code 16 or 16D rack, one Code 17 rack, or up to four Code 20-Series racks (all racks must be same code)
  • Operating modes: Time, drop, peak + time, peak + drop, and manual

 

  • Peak detection

 

    • Adaptive slope algorithm that applies use-specified parameters to accommodate drifting baselines, negative peaks, and asymmetrical peaks or absolute threshold level that collects all peaks above specified millivolt value
    • Peak Parameters: peak height or level, in mV, and peak width at half-height, in minutes
    • Minimum peak height for fractionation: 0.1 mV full scale
    • Detector-collector delay: 0.01 minute increments
  • Physical space requirement: 47.9 x 46.4 x 33.0 cm (18.9 x 18.3 x 13.0 in.)

 

  • Power requirements

 

    • Frequency: 50 to 60 Hz
    • Voltage: 100 - 120V or 220 - 240V, mains voltage fluctuations not to exceed ±10% of the nominal voltage
    • Current rating: 0.5A for 100 - 120V or 0.25A for 220 - 240V
  • Programmable time units (min.): from 0.01 to 99.99 minutes per tube, with 0.01 minute limit of resolution
  • Software control: Via Gilson Serial Input/Output CHannel (GSIOC) or by contact closure
  • Time based programming: Up to ten collection windows and ten drain steps in any mode
  • Tube change time: 100-720ms. Center-to-center, depending on rack type
  • Weight: 10.9 kg (24 lbs)
Learn More
Gilson-FC204-HPLC-Fraction-Collector-21036
By clicking below we can further assist you with your inquiry. Inquire 2 In Stock Worldwide Shipping
Bran Luebbe InfraProver II NIR SpectrometerImage Coming Soon

Bran Luebbe InfraProver II NIR Spectrometer

Cambridge ID #: 13370

Description: The DO308 drying oven is ideal for accurate water determination of solid or viscous samples like:

  • Substances that release water only at elevated temperatures such as plastics in powder or granular form
  • Substances that cause side reactions with Karl Fischer reagent such as oxidizing inorganic salts
  • Substances that cause problems in the titration vessel due to their consistency such as fibrous or pasty substances
  • Substances that are poorly soluble or insoluble such as wool, dough, tar or coal

Specifications:

  • Temperature range: 40 - 300 °C
  • Temperature accuracy: ±5 °C (@300°C)
  • Footprint housing: 256 x 180 mm
  • Dimensions overall: 500 x 220 mm
  • Voltage (auto selection): 100 ... 230 VAC   
  • Max. power consumption: 450 W
  • Height: 390 mm
  • Weight: 9.1 kg

Features and Benefits

  • Easy and fast manual handling - Easy handling for left and right handed operators. Sample exchange and sample transport into the heated zone of the oven is provided for by the simple transport system with a magnetic guide rod attached to the glass sample boat.
  • Equilibrium conditions are quickly reached - The cold and the hot zone can be purged separately with dry carrier gas using a stopcock. Ambient moisture introduced during sample exchange or addition via the sleeve opening is quickly carried away. Therefore, a stable drift is reached within a short period of time.
  • Enhanced operational safety - There is no need to remove the transfer tube from the titration cell after switching off the oven; just open the stopcock to avoid contamination of the oven due to underpressure. Different temperature ranges can be pre-programmed in one cycle. Safety is further improved by automatic shut down after the analysis is completed.
  • Ready for use - All necessary parts including the drying unit with gas flow measurement are part of the standard delivery. If purging with dry air is desired, an optional air pump is available.
Learn More
Bran-Luebbe-InfraProver-II-NIR-Spectrometer-13370
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Waters LCT Premier XE Mass Spectrometer

Waters LCT Premier XE Mass Spectrometer

Cambridge ID #: 20939
Features: The Waters LCT Premier XE orthogonal acceleration time-of-flight (oa-TOF), benchtop is a market leading mass spectrometer for LC Applications. The LCT Premier XE's high sensitivity Z-Spray ion source, ion transfer optics and TOF analyzer provides the most sensitive benchtop oa-TOF instrument in its class, giving capability of detecting very low level components with full spectral information. Enhanced resolution (up to 15,000 FWHM over 30,000 m/z) spectral data provides the capability of high accuracy exact mass measurements providing improved data specificity through elemental composition calculations resulting in an increased confidence in your data. For challenging and complex samples, the rapid spectral acquisition rate and wide dynamic range provide optimized detection capabilities making it the ideal MS instrument for qualitative applications. The Waters LCT Premier XE provides a powerful platform for MS analyses, upon which total system solutions may be designed to maximize data quality for your application. Its small footprint sits easily on your laboratory benchtop and is optimized for simplified fluidic connections to your LC system. When combined with ACQUITY UPLC, the LCT Premier XE provides optimized full spectral MS detection for UPLC separations, providing unsurpassed speed sensitivity and resolution for high throughput applications Resolution: up to 15,000 FWHM over 30,000 m/z Mass Accuracy: < 3 mDa High sensitivity Z-Spray ion source Wide dynamic range Specifications: Dimensions (L x W x H): 30″ x 30″ x 25″ Weight: 320 lbs Power: 120V/220V; 50Hz/60Hz
Learn More
Waters-LCT-Premier-XE-Mass-Spectrometer-20939
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Persee M7 *NEW* Mass Spectrometer

Persee M7 *NEW* Mass Spectrometer

Cambridge ID #: 21359

Features:

The M7 is an accurate, reliable and precise system which is suitable to both routine analysis and precision research applications. It can work with different manufacturers’ GC systems. The M7 MS can be widely used in food safety, environmental protection, material chemical industry, college education & research, life science, medicinal research, criminal investigation and many other fields. These applications benefit from its high performance, long service life and PERSEE’s strong after-sales service.

â—† User-friendly design makes the maintenance much easier 

â—† Compatible with different brand and models GC system

â—† The powerful GC-MS workstation is intuitive, simple and easy to operate. 

â—† The unique remote-control function enables powerful technical support 

â—† Competitive price and maintenance cost  

â—† Lifetime free workstation software update

 

Specifications:

  • GC&MS Interface: Capillary direct interface,independent temprature control, 50-300 ℃
  • Filament: Dual for EI,maximun emitting current 300uA
  • Ionization Enegy: 10-100 eV adjustable
  • Ion Source Temprature: Independent temprature control, maximum 350 ℃, adjustable
  • Mass Analyzer: High precision metal Molybdenum Quadrupole with pre-quadrupole
  • Backing Pump: Mechanical pump, geometric pumping speed 165 L/min
  • Turbo Pump: Turbo molecular pump, pumping speed 71 L/s, 260 L/s optional
  • Detector: Electron muliplier
  • Mass Range: 1.5-1050 u
  • Mass Accuracy: ±0.1 u
  • Resolution(R): Unit mass resolution
  • Mass Stability: ±0.1 u/48h
  • Maximum Scanning Speed: 11000 u/s
Learn More
Persee-M7-*NEW*-Mass-Spectrometer-21359
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Vacuubrand PC 3001 Vario Vacuum Pump

Vacuubrand PC 3001 Vario Vacuum Pump

Cambridge Scientific ID #'s: 19273, 19271, 19272, 19270

Specification:

 

  • Dimensions (L x W x H): 11.8 x 12 x 15.7
  • Weight: 17 lbs
  • Permissible range of coolant temperature: 5 to 68F
  • Maximum permissible pressure of coolant at vapor condenser: 87 psi
  • Coolant connection: hose nozzle for tubing I.D. ¼” - 5/16”
  • Outlet: hose nozzle for tubing I.D. â…œ”
  • Inlet: hose nozzle for tubing I.D. ¼” / â…œ”
  • Maximum pumping speed: 1.2 cfm
  • Ultimate vacuum without gas ballast: 1.5 Torr (3 Torr with gas ballast)
  • Maximum permissible inlet and outlet pressure: 16 psi
  • Maximum permissible pressure difference between inlet and outlet: 16 psi
  • Maximum permissible pressure at gas ballast valve: 17.5 psi
  • Permissible ambient temperature: 14 to 140F at storage / 50 to 104F at operation
  • Permissible relative atmospheric moisture during operation (no condensation): 30 to 85%
  • Maximum permissible installation altitude above mean sea level: 6500 ft
  • Rated motor power: 0.21 hp
  • No-load speed: 0 - 3000 rpm
  • Motor protection: current limitation (temperature sensor on the circuit board)
  • Degree of protection IEC 529: IP 20
  • Volume of catchpot: 0.52 quarts
Learn More
Vacuubrand-PC-3001-Vario-Vacuum-Pump-19273
By clicking below we can further assist you with your inquiry. Inquire 4 In Stock Worldwide Shipping
Persee PF7 *NEW* Atomic Absorption Spectrophotometer

Persee PF7 *NEW* Atomic Absorption Spectrophotometer

Cambridge ID #: 21358

Features:

The heavy metal analyzer PF7 features good accuracy, high sensitivity, simple structure, small volume and easy operation.  The automated PF7 is an ideal supplementary of ICP-MS if testing dozens of elements in ULTRA trace elements. A perfect replacement of ICP-MS if only testing heavy metals like Arsenic, Mercury, Cadmium and Lead. Popular instruments in various market and research industries including: Cannabis, Environment (Water and Soil), Agricultural, Public health, Pharmaceutical, Metallurgical, Food and beverage, Clinical, Geological, Petrochemical, and more. Also it comes with XYZ axis auto sampler AS4 as an optional accessory making the analysis even simpler.

â—† Pre-aligned whole system: For the perfect running condition, plug and play

â—† Free-adjustment and data coded high performance lamps: achieve better sensitivity and accuracy

â—† Up to 3 testing channels: For simultaneous analysis, high efficiency

â—† Fully sealed reagent system: Inorganic and organic waste dispose separately, build-in toxic elements trap devices, green laboratory, care for the health

â—† Gas-driven flow system: Without consumable parts, auto purge, chemical resistant FEP tubing, easy to maintenance

â—† High grade automation/intelligent: Auto sampler, Auto dilution, auto optimized

â—† Double beam optical system: To eliminate light source drift

â—† New design Gas Liquid Separator: With magnetic stirring and Peltier system for improved repeatability of analytical results and high sensitivity

â—† Easy to upgrade: Speciation system accessory, compatible with multi brand HPLC pump

 

Specifications:

  • Atomiser: Quartz furnace tube with auto ignition
  • Furnace Heating: Computer controlled heating
  • Hydride Generator: Continuous flow high performance for cold vapour Mercury and hydride determinations of As, Se, Te, Bi, Sb, Sn, Zn, Pb, Cd, Ge
  • Gas Requirement: High purity Argon gas (>99.99 %) @ 30 psi
  • Exhaust System: 2 stage filtration to decontaminate pollutants
  • Carrier and Reagent Delivery: Gas pressure driven system
  • Gas/Liquid Separator:  High efficiency gas/ liquid separator with magnetic stirring and Peltier cooling
  • Baseline Stability: <1.5 %
  • Baseline Noise: <1.5 %
  • Linear Range: >10³
Learn More
Persee-PF7-*NEW*-Atomic-Absorption-Spectrophotometer-21358
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping