Used Lab Equipment

Features:

The Savant Speed Vac Concentrator SVC100H-115 was made for solidification of biological solutions in micro-tubes. The rotor holds the tubes and vials at a fixed angle to force the solute to the bottom and maximize surface area exposed to evaporation. When working with hazardous materials or those in the micro-gram, nano-gram or smaller ranges Centrifugal force is applied by the rotor (spinning up to 17,000 RPM), concentrates all the sample at the bottom of the tube, assuring almost 100% sample recovery. The sample materials do not settle on the sides of the tube so the smallest amount of diluent is required to recover the sample.

Specifications:

• Dimensions (W x D x H): 11 x 11 x 10 3/4 in.
• Power: 50/60 Hz
• Input fuse: 115 V
• Weight: 40 lbs.
• Vacuum line:1/2" Hose fitting allows connection to any commercial Hi-Vac pump and -60°C trap

Features:

The T3 portable spectrometer is a compact portable instrument based on advanced CCD detection technology.

This highly compact instrument boasts all the features of a conventional bench-top spectrophotometer including Spectrum Scanning, Photometric, Quantitative and Kinetic methods.

Due to its portable design, it is also ideal for field monitoring and on-site operations for water and food analysis.

Pre-programmed test methods including calibration data for the Spectroquant series of reagent test kits from Merck Chemicals.

• Ruggedized case
• 2GB memory for data and method storage, support USB flash memory
• Easy to use with multiple interface including USB, RS232, Ethernet
• GPS positioning and GPRS mobile wireless data transmission (by SIM card)
• Lithium battery continuously work for 6 hours after fully charged
• Measure with cuvettes, test tube or optical fiber probe, work with a number of lab supplies as optional accessories to be a mobile lab

Specifications:

• Light source: Convergent tungsten lamp, 500 hrs of service life
• Measurement modes: Spectrum scan, quantitative measurement, kinetics measurement, photometric measurement
• Monochromator: Flat-field holographic concave grating
• Detector: CCD 1L x 511 2048 pixel
• Sampling accessories: Insert optic fiber probe, 10 mm and 20 mm pathlength tips; rectangular cuvette holder; cylindrical test tube holder
• Power supply: Built-in battery, continuously work for 6 hours after being charged
• Vehicle power: supply adapter (optional)
• Batterycharger: 90-240 V
• Printer: Micro printer (optional), support USB printer (PLC language)
• Operating system: Windows embedded CE 6.0 with 2 GB memory and timing function
• Input/display: 480 x 272 colour touch operation or mouse operation
• Wavelength range: 380-800 nm

Includes:

• Blue Laser Module
• Laptop w/ Image Quant and Scan Control Software loaded on computer
• All Necessary Cables, Cords and Manuals

Features:

• Versatile system platform, handles gel sandwiches, agarose and polyacrylamide gels, membranes, microplates, and even microarrays.
• Powerful excitation sources and innovative high-quality confocal optics allow for the sensitive detection of low-abundance targets.
• Red-, green-, and blue-excitation wavelengths and a wide choice of emission filters enable imaging of an extensive variety of fluorophores.
• Automated four-color fluorescence scanning allows multiplexing of multiple targets in the same sample ensuring accuracy of analysis, increasing throughput, and saving time.
• Storage phosphor technology delivers high-resolution imaging and accurate quantitation of ³H, ¹⁴C, ¹²⁵I, ³²P, ³³P, ³⁵S, and other sources of ionizing radiation.
• Highly sensitive optics enable direct chemiluminescent imaging without intermediate exposure to films or screens.
• Provides optimized detection of Cy2, Cy3, and Cy5 CyDye DIGE Fluor minimal and saturation dyes, enabling visualization of up to three differently labeled samples on a single gel.
• Exceptional signal-to-noise increases the number of statistically significant differences detected.
• Consistent point-light illumination produces high-quality uniform images and reduces photo-bleaching.
• Gels are scanned between glass plates, preventing drying and shrinkage and allowing further running and rescanning if required.

Specifications:

Noise: ±1 × 10–5 AU (254 nm, 2.0 s response time)
Drift: 2× 10–4 AU/h
Response Time: 0.1/0.2/0.5/1/2/5/10 s
Wavelengths: Up to four simultaneously, user-selectable
Wavelength Range and Accuracy: 190–740 nm, ± 2nm
Bandwidth: <8 nm
Flow Cell Volume: Nano LC, 3 nL volume; Capillary LC, 45 nL volume; Micro LC, 180 nL volume
Maximum Cell Pressure: 400 bar (6000 psi)
Lamp: Deuterium
Data Collection Rate: 1–10 Hz
Analog Output: 2×1 V
Dimensions (h × w × d): 16 × 42 ×51 cm (6.3 ×16.3 × 20 in.)
Weight: 10.5 kg (23 lb)

Features:

Both the table top centrifuge Z 326 and the refrigerated table top centrifuge Z 326 K offer a wide assortment of rotor options, making them ideal for a wide variety of research applications. Rotor exchange between swing out, micro, or high volume angled rotors is very simple and can take place in a matter of seconds.

The Z 326 K includes the refrigeration system on the back side of the unit, optimized for the lab bench at only 40 cm wide.

Specifications:

• Max. Speed: 18000 rpm
• Max. RCF: 23542 xg
• Max. Volume: 4 x 100ml
• Speed range: 200 - 18000 rpm 
• Running time: 59 min 50 s / 10 s increments, 99 h 59 min / 1 min increments
• Dimensions (WxHxD): 40 cm x 36 cm x 48 cm
• Weight: 43 kg

Features:

Both the table top centrifuge Z 326 and the refrigerated table top centrifuge Z 326 K offer a wide assortment of rotor options, making them ideal for a wide variety of research applications rotor exchange between swing out, micro, or high volume angled rotors is very simple and can take place in a matter of seconds.

The Z 326 K includes the refrigeration system on the back side of the unit, optimized for the lab bench at only 40 cm wide.

Specifications:

• Max. Speed: 18000 rpm
• Max. RCF: 23542 xg
• Max. Volume: 4 x 100ml
• Speed range: 200 - 18000 rpm 
• Temperaturvorwahl: -20°C to 40°C 
• Running time: 59 min 50 s / 10 s increments, 99 h 59 min / 1 min increments
• Dimensions (WxHxD): 40 cm x 36 cm x 70 cm
• Weight: 60 kg