Used Lab Equipment

Used Lab Equipment

We offer an assortment of used and refurbished Autoclaves ranging from Tabletop Autoclaves, Stand Alone Autoclaves and Top Loading Autoclaves to Wall Unit Autoclaves. Some of our popular manufacturers include Tuttnauer, Market Forge, Pelton & Crane, Hiryoma and Amsco. Additionally, we sell a wide selection of Glassware Washers including Labconco, Miele and Steris.

Micronizer Jet Mill: 1-6 of 6

*Please Select a Category and/or Manufacturer dropdown OR Search By Model Name, # or Keyword.* Advanced Search >
Neutec Eddy Jet 2 Spiral Plater

Neutec Eddy Jet 2 Spiral Plater

Cambridge ID #: 17979


The Eddy Jet 2 Spiral Plating System is a color screen touch screen fully programmable spiral inoculation instrument with accuracy and reproducibility of greater than 99%. This uses a unique gamma-Irradiated disposable micro-syringe for each new sample, eliminating cross-contamination and the need for a vacuum source or washing steps.


  • Maximum Syringe Volume: 100 µl
  • Maximum Flow Rate: 50 µl / sec.
  • Minimum Step Volume: < 0.1 µl
  • Reproducibility: < 1%
  • Spreading Modes Stored: all the accepted
  • External Balance Connection: serial RS232
  • Printer Connection: serial RS232
  • Mains: 230/100 VAC, 50/60 Hz.
  • Power: 440W
  • Dimensions (WxHxD): 7" x 12.6" x 16"
  • Weight: 44 lb.
Learn More
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Agilent 6460C LC/MS System

Agilent 6460C LC/MS System

Cambridge ID #: 17703

The Agilent 6460C Triple Quadrupole LC/MS System is equipped with Agilent Jet Stream Technology to enable enhanced sensitivity. The 6460 provides a fast and robust solution to simultaneously quantify, screen, and confirm analytes in the laboratory.

  • Greater signal and reduced noise - Agilent Jet Stream technology uses super-heated nitrogen to improve ion generation and desolvation
  • Efficient analysis – fast MRM speeds allow for analysis of over 100 overlapping compounds in a given retention time window
  • Screen, confirm and quantify – Triggered MRM (tMRM) combines fast and sensitive MRM quantitation with the generation of a product ion spectrum for library searching and compound screening and confirmation
  • Fast polarity switching for analysis of both positive and negative ions


  • MRM sensitivity Signal-to-Noise ratio ESI positive: S/N > 30,000:1 Noise 1 × RMS
  • MRM sensitivity Signal-to-Noise ratio (S/N) ESI negative: S/N > 10,000:1 Noise 1 × RMS
  • MRM sensitivity Instrument Detection Limit (IDL) ESI positive: IDL < 12.5 fg
  • MRM sensitivity Instrument Detection Limit (IDL) ESI negative: IDL < 12.5 fg
  • Mass range: m/z 5 – 3,000
  • Polarity switching: 30 ms
  • Mass resolution (autotune):7 Da
  • Mass resolution (manual tune):5 Da
  • Mass accuracy:
    • Da from 5 – 1,000 m/z
    • 01% from 1,000 – 2,000 m/z
    • 02% from 2,000 – 3,000 m/z
  • Mass stability: < 0.1 Da in 24 h
  • Dynamic range: > 6.0 × 106
  • Scan modes: MS scan, MS/MS product ion scan, MRM, MS/MS neutral loss/gain scan and precursor ion scan, SIM
  • Maximum scan rate: 12,500 Da/s
  • Minimum MRM dwell time: 1 ms
  • MRM transitions: 450 per time segment > 40,000 ion transactions per method
  • Dynamic MRM transitions: 4,000 ion transitions per method
  • Triggered MRM transitions: Up to 10 MRM transitions (primary and secondary) for library search and compound confirmation
  • Collision cell ion clearance: < 1 ms
Learn More
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Agilent 6530 QTOF with 1260 Infinity Bioinert HPLC LC/MS System

Agilent 6530 QTOF with 1260 Infinity Bioinert HPLC LC/MS System

Cambridge ID #: 18290


  • Mass accuracy within 2 ppm gives you complete confidence in your analysis.
  • Powerful Agilent Jet Stream source enables you to uncover low level components.
  • Wide in-spectrum dynamic range facilitates simultaneous measurement of minor components in the presence of intense background interferences.
  • The latest developments in Agilent Infinity II UHPLC, 2D-LC, SFC, and even GC-APCI chromatographic interfaces give you blazing fast acquisition speed.
  • Powerful MassHunter software provides the latest software capabilities for profiling, characterizing, identifying, and quantifying compounds in complex mixtures via high-definition MS and MS/MS.
  • Check out the latest developments in untargeted screening and quantitation using Agilent’s All Ions MS/MS technique.


  • Sensitivity, MS mode, electrospray on-column, 400 µL/min flow rate: 200:1 RMS; Option 200: 60:1 RMS
  • Sensitivity, MS/MS mode, electrospray on-column, 400 µL/min flow rate: 500:1 RMS; Option 200: 180:1 RMS
  • Mass resolving power: Greater than 10,000 at 118 m/z; Greater than 20,000 FWHM at 1,522 m/z
  • Mass accuracy, MS mode, electrospray on-column, 400 µL/min: Better than 2 ppm RMS as measured from 10 repeat injections
  • Mass accuracy, MS/MS mode, electrospray on-column, 400 µL/min: Better than 3 ppm RMS on m/z 397 as measured from 10 repeat injections
  • Mass accuracy temperature stability, MS mode: Maintain 1 ppm mass accuracy (variations < 3 °C from calibration temperature)
  • Dynamic range: Up to 5 decades
  • Mass range: m/z 100 – 20,000 extended mass range m/z 50 – 1,700 or 50 – 3,200 for both high resolution and extended dynamic range modes Quadrupole up to 4,000 m/z
  • Spectral acquisition rate, MS mode: 50 spectra/second
  • Spectral acquisition rate, MS/MS mode mode: 50 MS/MS spectra/second
  • Positive to negative switching:5 seconds


  • G5611A 1260 Quat Pump
  • G5667A 1260 HiP BioALS
  • G1316A 1260 TCC
  • G4212B 1260 DAD
  • G5664A 1260 BioFC-AS
  • Computer loaded with MassHunter BioConfirm (G829AA), Agilent SpectrumMill Proteomics (G2721AA), Mass Profiler Professional (G3835AA) and Personal METLIN metabolite database (G6825AA) software.
Learn More
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Agilent 6540A LC/ MS Q-ToF System

Agilent 6540A LC/ MS Q-ToF System

Cambridge ID #: 20099

Agilent 6540A UHD Accurate-Mass Q-ToF LC/MS with 1290 HPLC System

This unit is almost new from 2012. No samples were run except for the Agilent initial installation and routine annual PM.


  • G6540A UHD Accurate Mass Q-TOF LC/MS. includes ultra-high definition Q-TOF, JetStream technology, MassHunter workstation. (Dual ESI for Jet Stream source)
  • G1947B LC/MS APCI Source. Includes APCI spray chamber, corona discharge needle, nebulizer, APCI vaporizer, and test calibration kit. Configuration for usage with Q-ToF
  • G4220A 1290 Infinity Binary Pump. Includes Intelligent System Emulation Technology (ISET), integrated degassing unit, solvent selection valve connecting capillaries, column, solvent cabinet, bottles, system tool-kit and CAN cable.
  • G4226A 1290 Infinity Autosampler. A 1200 bar autosampler module in Agilent's new 1290 Infinity series of LC system. It features less than 100 ul of hydraulic delay volume and low carryover with flow-through injection design.
  • G1316C 1290 Infinity Thermostatted Column Compartment For use with any 1290 Infinity or 1260 Infinity system requiring low dispersion or special valve solutions. Temperature up to 100 degree C.
  • G4232B 2pos/10 port Valve head 1200bar. Includes 1200 bar QuickChange valve head, Capillary Kit 0.12mmID, G1316C 2/10 vlv
  • G3835A Mass Profiler Professional (MPP) Software.
  • G1953A PEAK Nitrogen Generator System. N2 Generator-PEAK Model NM32LA nitrogen generator with air compressor.
Learn More
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Ohaus HOHTDG *NEW* Homogenizer

Ohaus HOHTDG *NEW* Homogenizer

Cambridge ID #: 20239


The OHAUS HT (High Throughput) Lysing Bead Mill Lab Homogenizer offers efficient solutions for grinding, lysing, pulverizing, mixing and homogenizing sample preparations. High-throughput processing is ideal for multiple sample and tube configurations. Easy-to-load tray securely locks microplates, deep well plates or tubes in place. High-speed linear motion processes samples quickly. Maximize sample preparation no matter how difficult the task.


DNA, RNA and Protein Analysis (from mammalian tissue, plant, soil, seed, fungi, bacteria, virus and other cells), Cell Lysing, PCR, Gene Expression


Easy-to-read LED display allows the operator to view speed and time settings


Five pre-set program buttons and touchpad controls for speed and time




Polyurethane Elastomer top housing, Cycoloy bottom housing, and Lexan lid

Design Features

Microprocessor-controlled unit includes sample clamp and hex key




  • Speed Range: 300 rpm – 1600 rpm
  • Motion: Vertical, 31 mm
  • Capacity: 1 Deep Well, 4 Microplates or any sample to 10.2 x 12.7 x 6.4 cm
  • Timer: 1 second – 10 minutes
  • Programs: 5 Preset Programs
  • Control: Digital
  • Dimensions (HxLxW):20.5 in x 17.5 in x 11.5 in (518 mm x 443 mm x 288 mm)
  • Net Weight: 59 lb (26.8 kg)
  • Power: 120V, 6.3A, 50/60Hz
  • Power Consumption: 450 W
  • Safety Certification:TUV
  • Working Environment:40°F – 104°F, 20% – 85%RH, non-condensing (5°C – 40°C, 85%RH, non-condensing)
Learn More
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Belimed WD 230 Glassware Washer

Belimed WD 230 Glassware Washer

Cambridge ID #: 6906

Includes 56-Direct Injection Wash Rack with various length injectors (total 56 injectors and 10 sealing plugs provided)


The Belimed Models WD 230 represents a trend-setting design. They fully meet the latest customer requirements for automated preparation of laboratory glassware and top line goods. These models are ideally suited wherever efficiency, application-adapted cleaning, disinfecting and drying are essential. With a generously sized wash chamber and a modest exterior dimension, these models will minimize your floor space requirements and increase your productivity. The microprocessor control system offers up to twelve (12) user defined programmable cycles. The WD 230 utilizes a hinged down door with full viewing window built into the door.


For use in laboratories where glassware is handled for decontamination purposes. The Belimed WD 230 provides high level cleaning and disinfection while reducing risk and the need for manual washing.



  • Heat Source: Electric Heat
  • Weight: 270 Kg. (594 Lbs.)
  • Chamber Size (w x h x d) 24-3/4”x 27”x 26”
  • Overall Size (w x h x d): 35-7/16” x 72-1/2”x 31-1/2”
  • Volume (Ft3): 10
Learn More
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping