Used Lab Equipment

Features:

SA55JXGTD-4144 VACUUM PUMP 1/6 HP

Specifications:

• Item Weight: 20 pounds
• V: 115
• HZ: 60
• A: 4.4
• AMB: 40C

Description:

Forma Class II, Type B2 Benchtop Models provide maximum personnel and product protection by maintaining ultra-clean laminar airflow and total exhaust of the entire work zone air. Total exhaust makes units ideal for work that generates non-explosive chemical vapors and gases. Type B2 units may be used for work with biosafety levels 1, 2, and 3 biological agents, carcinogens, anti-neoplastic drugs, and low level radioisotopes

Specifications:

• Type: 4 Ft. Benchtop
• Window: Sliding window of 0.25" (0.6cm) thick laminated safety glass
• Work Area: 46.5" W x 25.3" H x 25.0" F-B (118.1 cm x 64.3 cm x 63.5 cm)
• Exterior Dimensions: 50.5" W x 69.8" H x 35.6" F-B (128.3 cm x 177.3 cm x 90.4 cm)
• Electrical: 115V, 60 Hz, 6.0 FLA
• Motor: 1/3 HP
• Breaker Requirements: 15 Amp
• Exhaust Requirements: 712-821 CFM
• Weight: 750 lbs. (340.2 kg)

Features:

The 120 Series are small, but full-featured, laboratory pumps with simple intuitive operation and four pumphead options to suit any application.

• Flow rates 0.0001 to 36mL/min at 2 bar (30psi)
• Compact footprint requiring minimal benchtop space: stacks two high
• Four pumphead options, with 1-, 2-, or 3-channel options to cover any application
• Manual operator control or manual/remote pump options
• Superior Speed Control up to 20,0000: ±1% set point accuracy
• IP31 ingress protection for wipedown environments
• Maintenance-free brushless DC motor Choose from 1-, 2- or 3-channel pumps
• Smooth wipe-down enclosure for ultimate cleanability
• Lockable keypad to prevent tampering

Specifications:

• Display Type: Digital
• Maximum Pressure: 30 psi
• Overall Height:2cm
• Overall Length:1 in.
• Motor Type: Brushless DC
• Reversible: Yes

Isotemp explosion-proof refrigerators, freezers and combination units are designed to be used in areas where ignitable materials are normally present. A range of models, articularly suited for safe storage in hazardous environments, are available with sizes from undercounter to full height freestanding.

• Spark-free interiors and exteriors reduce the risk of explosion
• All models are manual defrost
• Tough white exterior
• CFC- and HFC-free refrigeration system and insulation
• Designed for use in Class 1, Division 1, Group C and D environments

Specifications:

• Capacity: 10.0 cu. Ft.
• Style: Upright
• Interior(DxWxH): Ref: 13.5 × 19.5 × 38.5"; Frz: 15 × 17.5 × 11.5" 
• Exterior(LxWxH): 31.5 × 23.5 × 60"
• Temp. Range: Ref: 1° to 12°C; Frz: -12° to -20°C
• Defrost: Manual
• No. of Shelves: Ref: 4 door, 3 adjustable; Frz: 1 fixed
• Electrical Requirements: 120V 60Hz
• Weight(Shipping): 150 lb.

DuoSeal Vacuum Pumps are known for their ruggedness world-wide. These rotary vane pumps have large oil reservoirs to dilute contaminants. Low pump rpm to reduces friction and wear while minimizing reservoir temperature to lessen chemical reactivity. Pump can be ordered with an optional exhaust filter to control oil mist.

Specifications:

• Free Air Displacement cfm (l/min.) @60Hz: 5.6(160)
• Ultimate Pressure: 1 x 10-4(0.00013)
• Pump RPM: 525
• Oil Capacity: 2.25(2.1)
• Motor Horsepower (watts): 1/2(370)
• Overall Dimensions LxWxH in. (cm):  20x12x15 (51x30.5x60)

DuoSeal Vacuum Pumps are known for their ruggedness world-wide. These rotary vane pumps have large oil reservoirs to dilute contaminants. Low pump rpm to reduces friction and wear while minimizing reservoir temperature to lessen chemical reactivity. Pump can be ordered with an optional exhaust filter to control oil mist.

Specifications:

• Free Air Displacement cfm (l/min.) @60Hz: 5.6(160)
• Ultimate Pressure: 1 x 10-4(0.00013)
• Pump RPM: 525
• Oil Capacity: 2.25(2.1)
• Motor Horsepower (watts): 1/2(370)
• Overall Dimensions LxWxH in. (cm):  20x12x15 (51x30.5x60)

Features:

The EM range of oil-sealed rotary pumps is renowned for their high ultimate vacuum, rapid pumping speed, quiet operation and the ability to withstand vapour. They are commonly used for laboratory and light industrial applications. It is a freestanding instrument with the drive provided through a flexible coupling by either a single phase or three phase motor.

Specifications:

• Displacement:

                  50Hz: 20.5 m3h-1 /12.1 ft3min-1
                  60Hz: 25.0 m3h-1 /14.7 ft3min-1

• Speed (Pneurop 6602):

                   50 Hz: 17.0 m3h-1 /10 ft3min-1
                   60Hz: 20.4 m3h-1 /12.1 ft3min-1

• Ultimate vacuum (total pressure): 

                   without gas purge: 1 x 10-3 mbar /7.4 x 10-4 Torr
                   with gas purge: 1.5 x 10-1 mbar /1.1 x 10-2 Torr
                   with Fomblin: 1 x 10-2 mbar /7.5 x 10-3 Torr

• Inlet connection: NW25
• Outlet connection: Nozzle 15mm external Ø removable from 3/4 in BSP tapped hole
• Max permitted pressure at outlet: 0.5 bar gauge /7 psig
• Max inlet pressure for water vapour: 20 mbar / 15 Torr
• Max water vapour pumping rate: 0.3 kg h-1
• Operating temp range: 13-40°C
• Nominal Rotation speed 50/60Hz: 1440 /1720 rpm
• Power connector 1-ph: IEC EN 60320 C19
• Motor power 50Hz: 0.55 kW
• Motor power 60Hz: 0.75 kW
• Noise at 50Hz: 57 dB(A)
• Oil capacity max: 1.05 litre
• Oil capacity min: 0.75 litre
• Recommended oil: Ultragrade 19
• Thermal overload device: prevents overheating (single phase only).
• The drive is provided through a flexible coupling: by a single‑phase or three‑phase (four pole) motor.
• The motors: are totally enclosed and are cooled by the motor cooling fan.
• Full height O ring sealed oil sight glass: for easy checking of oil level and condition

Description:

Analog orbital shakers are designed for a wide range of applications, including cell cultures that require accurate and reproducible results.

• 15.9 kg (35 lb.) capacity
• Microprocessor controls
• Continuous or timed operation

They provide reproducible motion that is evenly distributed through the platform's entire surface. Operating features include variable speed microprocessor control that provides consistent, uniform mixing. An integrated analog timer can be set from 1 to 120 minutes. A powerful triple eccentric drive and brushless motor ensure reliable service in continuous duty and can handle loads up to 15.9 kg (35 lbs.). Shakers can run in cold rooms, incubators, and CO2 environments from 0 to 40°C (32 to 104°F). To avoid splashing or sample loss, a ramping feature slowly increases speed to the desired set point.

Specifications:

• Environmentally Preferable Attribute: Product and/or packaging is recyclable or reduces waste
• Weight: 49 lbs. (22.2 kg)
• Timer Range: 1 minute to 2 hours
• Tray dimensions (L x W): 13” x 11" (33 x 28 cm)
• Max. Load: 35 lbs. (15.9 kg)
• Dimensions (L x W x H): 16.25” x 14” x 5.75" (41.3 x 35.6 x 14.6 cm)

PuriCare Open Access Station (transfer station)

Features

• Generous work surface area to accommodate standard rodent cages
• Electric hydraulic lift for infinite height adjustment from 36.5" to 47" with the push of a button
• Recessed and angled sashes for closer viewing without glare
• Large 14" high sash openings to accommodate various cage sizes with brakes
• Large 5" diameter, non-marking polyurethane casters
• Two 99.99% efficient HEPA filters to trap allergens
• Nominal downflow velocity of 55 fpm.
• Economical, disposable upper and lower prefilters
• Variable speed motor/blower and impellers
• Particulate-free ISO Class 5 (formerly Class 100) air
• Retractable, safety orange, top right-side mounted power cord, 28' (9 m) on 115 volt model
• Two push/pull bars on the right hand side to facilitate transport
• Two 32-watt fluorescent lights
• Two easy-to-read, ADA-compliant Minihelic pressure gauges
• ADA-compliant light and blower switches
• ADA-compliant electrical duplex
• Single pass airflow design with no recirculation through the enclosure helps prevent heat stress and odor build up.
• Type 304 stainless steel dished work surface
• Exterior is durable glacier white and slate gray epoxy-coated steel
• Full three year warranty on parts and labor
• ETL listed (115 volt models)
• CE Conformity Mark (230 volt models)

The 515 HPLC pump is a programmable, free-standing HPLC pump available in isocratic, gradient, and semi-preparative configurations:

Features:

• Precise stepper motor control (48 steps/µL resolution) of dual reciprocating pistons
• Non-circular drive gears provide smooth, uniform eluent delivery
• User-programmable flow rate calibration and compressibility compensation factors ensure straightforward pump operation qualification
• Tests to retention time variations of less than 0.1% for highly reproducible peak performance
• Easy-to-read display and keypad for error-free programming
• Automatic purging and flow calibration

Specifications:

• Flow rate precision 0.1%, accuracy 1%
• Flow rate up to10.000 mL/min, in 0.001-mL/min increments
• Maximum operating pressure: 6000 psi

Operating Features

• A-4-62 (4x250ml) including buckets for Models 5810
• With rectangular buckets max. rotational speed: 4,000 rpm (max. rcf: 3,200 x g)
• Touch-keypad control and digital display for speed/RCF, run time, program number and temperature (5810R only)
• With 34-program memory
• Run modes: Timed (up to 99 minutes in 1-minute increments) or continuous run
• Choice of 10 acceleration/braking profiles
• Accept tubes and bottles from 0.2 to 400mL (with accessory adapters, sold separately)

Safety Features

• Low-profile design for convenient access to rotor chamber
• Motorized lid lock
• Automatic rotor recognition and unbalanced load sensor with alert
• Low-noise (<60dB), maintenance-free motor

Operating Features

• Capacity: 1.6L (4 x 250mL) for Models 5810/5810R
• Maximum speed/RCF: 14,000rpm/20,800 x g
• Spin up to 48 x 15mL conical tubes or up to 30 microtubes per run
• Touch-keypad control and digital display for speed/RCF, run time, program number and temperature (5810R only)
• With 34-program memory
• Run modes: Timed (up to 99 minutes in 1-minute increments) or continuous run
• Choice of 10 acceleration/braking profiles
• Accept tubes and bottles from 0.2 to 400mL (with accessory adapters, sold separately)

Safety Features

• Low-profile design for convenient access to rotor chamber
• Motorized lid lock
• Automatic rotor recognition and unbalanced load sensor with alert
• Low-noise (<60dB), maintenance-free motor

Refrigerated 5810R Features

• CFC-free refrigeration system
• Variable temperature control from -9° to +40°C (16° to 104°F)
• Fast Cool function cools the rotor chamber from ambient down to 4°C within 15 min.
• Standby refrigeration keeps the rotor chamber at set temperature
• Maintain temperatures as low as +4°C (39°F) at max. speed under heavy load
• Choose 15A or faster-cooling 20A versions

Features:

• Glacier white, dry powder epoxy-coated aluminum construction.
• 3/16 in thick tempered safety glass sides.
• Air-mixing, epoxy-coated steel rear baffle.
• Two roughing pre-filters.
• Two 1.5 in diameter utility ports with plastic plugs.
• Gas-assisted filter clamping mechanism.
• Control panel with LCD for display of filter time elapsed; programmable timer for audio/visual alarm; ALARM/MUTE switch with LED indicator; SET FILTER TIME, UP/DOWN, and ENTER programming switches; and event timer.
• Built-in, non-sparking motor/blower.
• Pre-wired with two 20-watt fluorescent lights and switches for blower and light.
• Angled ¼ in thick tempered safety glass sash, adjustable to two operating height positions (13 in and 15 in to work surface), pivots to full open position (24.25 in) for cleaning and transfer of material.
• Face velocity of 100 fpm (236 CFM) when sash opening to work surface is 13 in and 80 fpm (236 CFM) when sash opening is 15 in.
• Air sampling syringe for test port.
• Shipped fully assembled.

Specifications:

• Power Requirements: 115 V, 60 Hz, 3 A

• Weight: 290 lbs

Description:

The Console Drives are highly featured yet easy to operate Masterflex L/S pump drives, These drives are self contained compact unites that include a drive motor and all operating controls. The keypad is laid out on a sloped front panel for ease of control and for quick and easy indication status. A digital display provides a continuous indication of flow rates, actual rpm or percentage of maximum rpm.

Specifications:

• Maximum Speed: 100 rpm
• Minimum Speed: 1.6 rpm
• Operating Temperature: 0°C to 40°C
• Storage Temperature: -10°C to 60°C
• Chemical Resistance: Exposed material is paint, plastic, aluminum, and vinyl
• Line Voltage Limits: 90 to 130 V AC, 50/60 Hz
• Dimensions (L x W x H): 11.5 x 7 x 7 in. (29.2 x 17.8 x 17.8 cm)
• Weight: 15 lbs. (6.8 kg)

Specifications:

• Free air displacement: 138 L/min @ 50Hz
• Normal pumping speed: 7.51 L/min @ 50Hz
• Guaranteed ultimate pressure: 1x10-4torr
• Sound level: 50 dBA
• Motor/pump speed: 1425 RPM @ 50Hz
• Motor horsepower: 0.5hp
• Pump weight: 48lbs (22kg)