Used Lab Equipment

Used Lab Equipment

We typically have used and reconditioned pumps in stock from leading manufacturers like Cole-Palmer and Watson/Marlow.

Motor Division: 31-45 of 100

*Please Select a Category and/or Manufacturer dropdown OR Search By Model Name, # or Keyword.* Advanced Search >
Edwards E2M0.7 *NEW* Vacuum Pump

Edwards E2M0.7 *NEW* Vacuum Pump

Cambridge ID #: 17431

Features:

The Edwards E2M0.7 is a two stage oil sealed rotary vane pump which has a pressurized oil system that lubricates the pump shaft bearing surfaces and rotor sealing faces. This pump has an oil distribution valve that prevents any oil discharge to the pump interior(suckback) after the pump stops. It is equipped with air-tight pumping chambers, which prevents oil suckback unless the gas ballast valve is open.

 

Specifications:

 

  • Operating temperature range: 12 - 40°
  • Motor power: 0.09 kW
  • Noise: 43 dB(A) at 50 Hz
  • Noise with acoustic enclosure: 36 dB(A) at 50 Hz
  • Pumping speeds: 0.7 to 1.5 m3h‑1
  • Nominal rotational speed 50/60Hz: 1400/1700 rpm
  • Low energy consumption: 0.09 kW.
  • Oil capacity maximum: 0.28 litre
  • Oil capacity minimum: 0.2 litre
  • Recommended oil: Ultragrade 15
  • Displacement (swept volume) 50Hz: 0.9 m3h-1 / 0.5 ft3min-1
  • Displacement (swept volume) 60Hz: 1.1 m3h-1 / 0.6 ft3min-1
  • Speed (Pneurop 6602) 50 Hz: 0.75 m3h-1 / 0.4 ft3min-1
  • Speed (Pneurop 6602) 60Hz: 0.95 m3h-1 / 0.5 ft3min-1
  • Ultimate vacuum (total pressure)
    without gas ballast: 3.0 x 10-3 mbar / 2.3 x 10-3 Torr
    with full gas ballast: 2.0 x 10-1 mbar / 1.5 x 10-1 Torr
  • Inlet connection: NW10 flange
  • Outlet connection: Nozzle 11 mm external diameter removable from 3/8 inch BSP tapped hole
  • Maximum permitted pressure at outlet: 0.5 bar gauge / 7 psig
  • Maximum inlet pressure for water vapour: 15 mbar / 11 Torr
  • Maximum water vapour pumping rate: 8 gh-1
  • Power connector: IEC EN60320 C13
  • O ring sealed sight glass: allows visual inspection of oil level and condition.
  • Gas ballast valve: for large water vapour handling capacity.
  • Forced air cooling: ensures low pump surface temperature.
Learn More
Edwards-E2M0.7-*NEW*-Vacuum-Pump-17431
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Edwards E2M1.5 *NEW* Vacuum Pump

Edwards E2M1.5 *NEW* Vacuum Pump

Cambridge ID #: 17432

Features:

The Edwards E2M1.5 is a two stage oil sealed rotary vane pump which has a pressurized oil system that lubricates the pump shaft bearing surfaces and rotor sealing faces. This pump has an oil distribution valve that prevents any oil discharge to the pump interior(suckback) after the pump stops. It is equipped with air-tight pumping chambers, which prevents oil suckback unless the gas ballast valve is open.

 

Specifications:

 

  • Operating temperature range: 12 - 40 °C
  • Noise: 54 dB (A) at 50 Hz
  • Noise with acoustic enclosure: 47 dB(A) at 50Hz
  • Oil capacity max: 0.28 litre
  • Oil capacity min: 0.2 litre
  • Power connector: IEC EN 60320 C13
  • Displacement (swept volume):

                50 Hz: 1.8 m3h-1 / 1 ft3min-1

                60 Hz: 2.2 m3h-1 / 1.3 ft3min-1

  • Speed (Pneurop 6602):

 

                50 Hz: 1.6 m3h-1 / 0.8 ft3min-1

                60 Hz: 2.0 m3h-1 / 1.2 ft3min-1

  • Ultimate vacuum (total pressure):
          without gas ballast: 3 x 10-3 mbar / 2.3 x 10-3 Torr
          with gas ballast: 2.5 x 10-2 mbar / 1.9 x 10-2 Torr
  • Inlet connection: NW10 flange
  • Outlet connection: Nozzle 11 mm external diameter removable from 3/8 inch BSP tapped hole
  • Maximum permitted pressure at outlet: 0.5 bar gauge / 7 psig
  • Maximum inlet pressure for water vapour: 15 mbar / 11 Torr
  • Maximum water vapour pumping rate: 16 gh-1
  • Motor power 50/60 Hz (IP54): 0.16 kW
  • Nominal rotation speed 50/60Hz: 2800/3400 rpm
  • Recommended oil: Ultragrade 15

 

Learn More
Edwards-E2M1.5-*NEW*-Vacuum-Pump-17432
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Edwards E2M12 Vacuum PumpImage Coming Soon

Edwards E2M12 Vacuum Pump

Cambridge ID #: 1567

Features:

Edwards E2M2 rotary vane pumps have a peak pumping velocity of 1.5 cfm and a ultimate pressure of 7.5 x 10-4 Torr. The E2M2 is a dual stage rotary vane mechanical vacuum pump with a 1 phase or 3 phase electrical supply.  It is reliable and operates quietly at 52 dB(A).It has excellent vapor handling capabilities and can be used in many applications.

 

Specifications:

  • Nominal Displacement:2 (cfm)
  • Nominal Displacement: 289 (l/m)
  • Stage: 2
  • Motor HP: 3/4
  • Oil Capacity: .6
  • Weight: 26
  • Noise Level: 52
Learn More
Edwards-E2M12-Vacuum-Pump-1567
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Edwards E2M18 *NEW* Vacuum Pump

Edwards E2M18 *NEW* Vacuum Pump

Cambridge ID #: 17438

Features:

The EM range of oil-sealed rotary pumps is renowned for their high ultimate vacuum, rapid pumping speed, quiet operation and the ability to withstand vapour. They are commonly used for laboratory and light industrial applications. It is a freestanding instrument with the drive provided through a flexible coupling by either a single phase or three phase motor.

 

Specifications:

  • Displacement:

 

                  50Hz: 20.5 m3h-1 /12.1 ft3min-1
                  60Hz: 25.0 m3h-1 /14.7 ft3min-1

 

  • Speed (Pneurop 6602):

 

                   50 Hz: 17.0 m3h-1 /10 ft3min-1
                   60Hz: 20.4 m3h-1 /12.1 ft3min-1

  • Ultimate vacuum (total pressure): 

                   without gas purge: 1 x 10-3 mbar /7.4 x 10-4 Torr
                   with gas purge: 1.5 x 10-1 mbar /1.1 x 10-2 Torr
                   with Fomblin: 1 x 10-2 mbar /7.5 x 10-3 Torr

  • Inlet connection: NW25
  • Outlet connection: Nozzle 15mm external Ø removable from 3/4 in BSP tapped hole
  • Max permitted pressure at outlet: 0.5 bar gauge /7 psig
  • Max inlet pressure for water vapour: 20 mbar / 15 Torr
  • Max water vapour pumping rate: 0.3 kg h-1
  • Operating temp range: 13-40°C
  • Nominal Rotation speed 50/60Hz: 1440 /1720 rpm
  • Power connector 1-ph: IEC EN 60320 C19
  • Motor power 50Hz: 0.55 kW
  • Motor power 60Hz: 0.75 kW
  • Noise at 50Hz: 57 dB(A)
  • Oil capacity max: 1.05 litre
  • Oil capacity min: 0.75 litre
  • Recommended oil: Ultragrade 19
  • Thermal overload device: prevents overheating (single phase only).
  • The drive is provided through a flexible coupling: by a single‑phase or three‑phase (four pole) motor.
  • The motors: are totally enclosed and are cooled by the motor cooling fan.
  • Full height O ring sealed oil sight glass: for easy checking of oil level and condition

 

 

Learn More
Edwards-E2M18-*NEW*-Vacuum-Pump-17438
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Edwards E2M28 *NEW* Vacuum Pump

Edwards E2M28 *NEW* Vacuum Pump

Cambridge ID #: 17439

Features:

The EM range of oil-sealed rotary pumps is renowned for their high ultimate vacuum, rapid pumping speed, quiet operation and the ability to withstand vapour. They are commonly used for laboratory and light industrial applications. It is a freestanding instrument with the drive provided through a flexible coupling by either a single phase or three phase motor.

 

Specifications:

 

  • Power Connector 1-ph: IEC EN 60320 C19
  • Noise: 57 dB(A) at 50 Hz
  • Oil capacity max: 1.5 litres
  • Oil capacity min: 1.2 litres
  • Displacement (swept volume):
               50Hz: 32.2 m3h-1 / 19 ft3min-1
               60Hz: 38.9 m3h-1 / 22.3 ft3min-1
  • Speed (Pneurop 6602):
               50Hz: 27.5 m3h-1 / 16.2 ft3min-1
               60Hz: 33.0 m3h-1 / 19.5 ft3min-1
  • Ultimate vacuum (total pressure)
               without gas ballast: 1 x 10-3 mbar / 7.5 x 10-4 Torr
               with gas ballast: 1.5 x 10-2 mbar / 1.1 x 10-2 Torr
               with Fomblin: 1 x 10-2 mbar / 7.5 x 10-3 Torr
  • Inlet connection: NW25 flange
  • Outlet connection: Nozzle 15mm external Ø removable from 3/4 in BSP tapped hole
  • Max allowed pressure at outlet: 0.5 bar gauge / 7 psig
  • Max inlet pressure for water vapour: 30 mbar / 23 Torr
  • Max water vapour pumping rate: 0.7 kg h-1
  • Operating temperature range: 13 – 40 °C
  • Nominal rotation speed: 1440 / 1720 rpm
  • Motor power 50Hz: 0.75 kW
  • Motor power 60 Hz: 0.90 kW
  • Recommended oil: Ultragrade 19
  • Thermal overload device: prevents overheating (single phase only).
  • The drive is provided through a flexible coupling: by a single‑phase or three‑phase (four pole) motor.
  • The motors: are totally enclosed and are cooled by the motor cooling fan.
  • Full height O ring sealed oil sight glass: for easy checking of oil level and condition.
  • IE3 energy efficient 3 phase motor used with E2M28.

 

 

Learn More
Edwards-E2M28-*NEW*-Vacuum-Pump-17439
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Edwards E2M5 Vacuum PumpImage Coming Soon

Edwards E2M5 Vacuum Pump

Cambridge ID #: 2926

Features:

Edwards E2M2 rotary vane pumps have a peak pumping velocity of 1.5 cfm and a ultimate pressure of 7.5 x 10-4 Torr. The E2M2 is a dual stage rotary vane mechanical vacuum pump with a 1 phase or 3 phase electrical supply.  It is reliable and operates quietly at 52 dB(A).It has excellent vapor handling capabilities and can be used in many applications.

Specifications:

  • Nominal Displacement: 4 (cfm)
  • Nominal Displacement: 113 (l/m)
  • Stage: 2
  • Motor HP: 1/2
  • Oil Capacity: .6
  • Weight:6
  • Noise Level: 52

 

 

Learn More
Edwards-E2M5-Vacuum-Pump-2926
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
IKA Euro-ST 200 C S21 Overhead Stirrer

IKA Euro-ST 200 C S21 Overhead Stirrer

Cambridge Scientific ID #'s: 21485, 21484

Features:

Extremely powerful laboratory stirrer for highly viscous applications and intensive mixing for quantities up to 100 l (H2O). It is designed with a removable wireless controller and a digital TFT display. It automatically adjusts the speed through microprocessor controlled technology within the speed range of 0/6 - 2000 rpm (two speed ranges). The stirrer comes equipped with a RS 232 and a USB interface to control and document all parameters. An integrated torque trend display is provided for the measurement of viscosity changes. Safety circuits installed ensures automatic cut-off in an anti-stall or overload conditions. Continuous comparison of shaft speed to desired speed is maintained and variations are adjusted automatically. This guarantees a constant speed even with changes in viscosities of the sample.

Specifications:

 

  • Stirring quantity max (H2O): 100 l 
  • Motor rating input: 135 W
  • Motor rating output: 84 W
  • Speed range: 0/6 - 2000 rpm
  • Viscosity max: 100000 mPas
  • Torque max. At stirring shaft: 200 Ncm
  • Setting speed accuracy: +/- 1 rpm
  • Dimensions: 91 x 297 x 231 mm (W x H x D)
  • Weight: 4.9 kg
Learn More
IKA-Euro-ST-200-C-S21-Overhead-Stirrer-21485
By clicking below we can further assist you with your inquiry. Inquire 2 In Stock Worldwide Shipping
Sorvall Evolution RC Floor Super Speed Centrifuge

Sorvall Evolution RC Floor Super Speed Centrifuge

Cambridge ID #: 8127

The Sorvall Evolution RC centrifuge is not only powerful and reliable, it is also user friendly. From its large, easy-to-read control panel to the ergonomic door handle, the Sorvall Evolution RC centrifuge systematically reduces effort.

Specifications

  • Maximum speed: 26,000 rpm
  • Maximum RCF: 70,450 xg
  • Maximum capacity: 6 liters
  • Drive system: Brushless DC motor with gyro drive
  • Accel/decel profiles: 3/3
  • Speed control accuracy: ± 20 rpm in the 0 - 1000 rpm range; ± 0.2% in the 1000 - 26,000 rpm range
  • Temperature set range: -20°C to +40°C
  • Temperature accuracy (run mode): ± 2°C under normal laboratory conditions
  • Operating temperature range: 10°C to 38°C
  • Temperature control system: Non-CFC refrigerant
  • Average heat output: 5 kW/8500 BTU/hr
  • Noise: 63 dbA (1 m from instrument at maximum speed)
  • Dimensions H x W x D: 1295 x 710 x 1055 mm (51 x 28 x 42 in)
  • Height to top of deck: 850 mm (33 in)
  • Depth with door open: 1125 mm (44 in)
  • Weight: 390 kg (860 lb)
  • Certifications: UL listed; CSA Certified; CE marked
Learn More
Sorvall-Evolution-RC-Floor-Super-Speed-Centrifuge-8127
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Thermo Sorvall Evolution RC Floor Super Speed Centrifuge

Thermo Sorvall Evolution RC Floor Super Speed Centrifuge

Cambridge Scientific ID #'s: 15566, 19967

The Sorvall Evolution RC centrifuge is not only powerful and reliable, it is also user friendly. From its large, easy-to-read control panel to the ergonomic door handle, the Sorvall Evolution RC centrifuge systematically reduces effort.

Specifications

  • Maximum speed: 26,000 rpm
  • Maximum RCF: 70,450 xg
  • Maximum capacity: 6 liters
  • Drive system: Brushless DC motor with gyro drive
  • Accel/decel profiles: 3/3
  • Speed control accuracy: ± 20 rpm in the 0 - 1000 rpm range; ± 0.2% in the 1000 - 26,000 rpm range
  • Temperature set range: -20°C to +40°C
  • Temperature accuracy (run mode): ± 2°C under normal laboratory conditions
  • Operating temperature range: 10°C to 38°C
  • Temperature control system: Non-CFC refrigerant
  • Average heat output: 5 kW/8500 BTU/hr
  • Noise: 63 dbA (1 m from instrument at maximum speed)
  • Dimensions H x W x D: 1295 x 710 x 1055 mm (51 x 28 x 42 in)
  • Height to top of deck: 850 mm (33 in)
  • Depth with door open: 1125 mm (44 in)
  • Weight: 390 kg (860 lb)
  • Certifications: UL listed; CSA Certified; CE marked
  • Warranty: 1 year instrument; 3 years drive motor; 5 years refrigeration system
Learn More
Thermo-Sorvall-Evolution-RC-Floor-Super-Speed-Centrifuge-15566
By clicking below we can further assist you with your inquiry. Inquire 2 In Stock Worldwide Shipping
Hoshizaki F-300BAF Ice Maker

Hoshizaki F-300BAF Ice Maker

Cambridge ID #: 18549

Features:

The F-300BAF is capable of producing approximately 303 lbs of flaked ice per day.  This Air-cooled, Self Contained, Built in Storage Bin ice maker stores up to 100 lbs of ice. It features an Automatic system flush when bin control is activated plus a greaseless bearing auger construction making it simple to maintain. The F-300BAF requires a Single phase, 115v/60/1 electrical connection. Ice maker with built in storage. ENERGY STAR qualified. Please consult the Specification Sheet for additional details.



Specifications:

  • Up to 303 lbs of ice produced per 24 hours
  • Up to 100 lbs of built-in storage capacity
  • Produces flaked ice
  • Durable stainless steel exterior
  • Ice maker with built in storage
  • Gear motor protected from overload
  • Automatic system flush when bin control is activated
  • R-404a refrigerant
  • Designed for long life dependability
  • Dimensions: 36″ W x 24″ D x 39″ H
  • Ambient temperature range: 45 – 100°F
  • Water temperature range: 45 – 90°F
  • Water pressure: 10 – 113psig
  • Voltage range: 104 – 127V
  • 9 amps (15 Amp Max fuse)
  • 6.7 kwh/100 [email protected] 90/70
  • Single phase, 115v/60/1
Learn More
Hoshizaki-F-300BAF-Ice-Maker-18549
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Ohaus FC5706 *NEW* Benchtop Centrifuge

Ohaus FC5706 *NEW* Benchtop Centrifuge

Cambridge ID #: 20281

Features:

Frontier Multi Centrifuges are reliable compact low-speed general-purpose centrifuges. The standard rotor options can process both round and conical bottom tubes (including common blood tubes), and can also be adapted easily with accessories to process smaller tubes. Designed with convenient operation in mind, the Multi Centrifuges feature an intuitive interface. The compact profile helps to save valuable bench space in labs.

Applications

Centrifugation

Display

LCD, Backlight, 2 lines

Operation

AC Power (Included)

Communication

N/A

Construction

Brushless quiet motor, small footprint

Design Features

Easy installation design

 

Specifications:

 

 

  • Speed Range:200 rpm – 6,000 rpm
  • Maximum Relative Centrifuge Force (x g):4/427 g
  • Maximum Capacity (Rotor):6x50 ml
  • Acceleration Gear:10
  • Deceleration Gear:10
  • Dimensions (HxLxW):10.5 in x 15.4 in x 11.5 in (266 mm x 392 mm x 291 mm)
  • Display: LCD with backlight
  • Net Weight:23 lb (10.5 kg)
  • Noise Level:≤60±2 dB(A)
  • Power Consumption: 100 W
  • Rotor Recognition Method: Auto
  • Running Time: Quickspin;  10 sec to 99 h 59 min 59 sec;  Continous
  • Safety Certification: CE;  FCC

 

  • Working Environment:36°F – 95°F, 80%RH, non-condensing (2°C – 35°C, 80%RH, non-condensing)
Learn More
Ohaus-FC5706-*NEW*-Benchtop-Centrifuge-20281
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Ohaus FC5707+R05 *NEW* Benchtop Centrifuge

Ohaus FC5707+R05 *NEW* Benchtop Centrifuge

Cambridge ID #: 20280

Features:

Frontier Multi Centrifuges are reliable compact low-speed general purpose centrifuges. The standard rotor options can process both round and conical bottom tubes (including common blood tubes), and can also be adapted easily with accessories to process smaller tubes. Designed with convenient operation in mind, the Multi Centrifuges feature an intuitive interface. The compact profile helps to save valuable bench space in labs.

Applications

Centrifugation

Display

LCD, Backlight, 2 lines

Operation

AC Power (Included)

Communication

N/A

Construction

Brushless quiet motor, small footprint

Design Features

Easy installation design

 

Specifications:

 

 

  • Speed Range:200 rpm – 6,800 rpm
  • Maximum Relative Centrifuge Force (x g):4,445 g
  • Maximum Capacity (Rotor):8x15 ml
  • Acceleration Gear:10
  • Deceleration Gear:10
  • Dimensions (HxLxW):9.3 in x 14 in x 10.9 in (236 mm x 356 mm x 277 mm)
  • Display: LCD with backlight
  • Net Weight:22.1 lb (10 kg)
  • Noise Level:≤60±2 dB(A)
  • Power Consumption: 100 W
  • Rotor Recognition Method: Auto
  • Running Time: Quickspin;  10 sec to 99 h 59 min 59 sec;  Continous
  • Safety Certification: CE;  FCC
  • Working Environment:36°F – 95°F, 80%RH, non-condensing (2°C – 35°C, 80%RH, non-condensing)

 

 

Learn More
Ohaus-FC5707+R05-*NEW*-Benchtop-Centrifuge-20280
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Argos Flexifuge Mini Centrifuge Mini CentrifugeImage Coming Soon

Argos Flexifuge Mini Centrifuge Mini Centrifuge

Cambridge ID #: 18662

Description: FlexiFuge is a versatile, personal micro-centrifuge for quick, low speed centrifugation. Whisper quiet motor offers two speeds (2000g / 5,000g or 9,200 RPM) depending on application. FlexiFuge can be operated in continuous mode, pulsed for a short burst of rapid centrifugation, or timed to spin from 1-15 minutes. Regardless of setting, rotors stop once the lid release button is pushed. A ring of LED lights illuminate when the unit is active and can be viewed through the transparent lid. Color can be changed (red, green, blue) or turned off by a switch under the unit. FlexiFuge is supplied with an 8-Place fixed angle rotor for 1.5mL tubes, a rotor for (4), 8 x.2mL PCR tube strips, 8 adapters for .5mL tubes and a 4-place rotor to spin 5mL micro-centrifuge tubes.



Specifications:

 

  • Speed (Slow): 6000 rpm

 

  • Speed (Fast): 9200 rpm

Relative Centrifugal Force

 

  • 1.5ml Rotor (6000 rpm): 2012G
  • 0.2ml PCR Strip (6000 prm): 1509G
  • 5ml Rotor (6000 rpm): 2414G
  • 1.5ml Rotor (9200 rpm): 4731G
  • 0.2ml PCR Strip (9200 prm): 3549G
  • 5ml Rotor (9200 rpm): 5677G
  • Noise Level: <65dB
  • Power Requirements: 100-240V~ 1.0A; 50/60Hz
  • Spin Modes: Continuous, Timed, and Quick-Spin
  • Timer: 1 to 15 minutes
  • Dimensions (L x W x H with lid closed)- in: 9.45 x 7.36 x 5.47
  • Dimensions (L x W x H with lid closed)- mm: 240 x 187 x 139
  • Weight (lbs): 3.6

 

Weight (kg): 1.6

Learn More
Argos-Flexifuge-Mini-Centrifuge-Mini-Centrifuge-18662
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Shimadzu FRC-10A HPLC Fraction Collector

Shimadzu FRC-10A HPLC Fraction Collector

Cambridge ID #: 18619

A proprietary band function enables obtaining accurate fractions even when the peak elution time varies, by catching the target component according to variations in the chromatogram. If connected to workstation software, fractions can be simulated on screen to determine whether or not the fraction program is appropriate.

 

Details:

  • Small and Large Volume Collection Capacity
    • The FRC-10A collects both analytical and preparative fractions. The standard configuration has a 144 5mL vial capacity. The large volume kit can be added for large volume collection.
  • Precise Peltier Temperature Control
    • For automated collection of thermally-labile fractions, Peltier temperature control keeps temperatures stable within a 4-70º C range.
  • Simplified Graphical Parameter Entry
    • Set up fractionation parameters graphically from the SCL-10AVP System Controller. Eliminate the guesswork of determining slope and level values.
  • Fraction Collection Flexibility
    • Tailor the collection to your application requirements.  Choose from collection criteria such as volume, threshold, and peak purity. A precise peak division feature ensures high purity fractions. The FRC-10A automatically adjusts for retention time shifts, so that only the peak of interest is collected. Our slope-override capability enables continued collection, even when the detector signal is off-scale.

Specifications:

  • Drive System and Fraction Collection Methods: Arm-Movement X-Y System
  • Select either solenoid valve or direct through nozzle
  • Fraction Modes: Manual or programmed fraction collection by combining 14 types of parameters, such as slope, level, and band
  • Number of Fractions: 16 to 144
  • Collection Tubes: Glass: 3.5, 5, 20, 32, or 50 mL, or user supplied
  • Polypropylene: 4.5, 5, 25, or 50 mL, or user supplied
Learn More
Shimadzu-FRC-10A-HPLC-Fraction-Collector-18619
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Welch Gem 1.0 Vacuum PumpImage Coming Soon

Welch Gem 1.0 Vacuum Pump

Cambridge ID #: 13474

Description:

The Welch 8890A, GEM 1.0 is a durable vacuum pump with a superior vapor handling capability. The Welch 8890A, Direct Drive Vacuum dual stage rotary vane mechanical vacuum pump offers an excellent ultimate pressure of  1 x 10-1 Torr. These pumps are commonly used for vacuum furnace evacuation, backing turbomolecular pumps, backing diffusion pumps, rotary evaporation, refrigeration system evacuation, epoxy degassing, vacuum sterilization, backing mass spectrometers, freeze drying, vacuum centrifugal applications, vacuum distillation, space research, and other vacuum processes. This pump also is well suited for use in gas analyzers, continuous gas-flow lasers, general-purpose drying, and similar uses where a middle-range vacuum level is required.

Specifications:

  • Ultimate Pressure (Torr): 1 x 10-1
  • Sound Level (dBA): 58
  • Motor/Pump Speed (60 Hz): 3450
  • Weight: 24.5 lbs. (11.1 kg)
  • Dimensions (L x W x H): 14.5 x 5.1 x 8.4” (36.8 x 13 x 21.3 cm)
Learn More
Welch-Gem-1.0-Vacuum-Pump-13474
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping