Cambridge Scientific
Used Lab Equipment

Used Lab Equipment

We offer an assortment of used and refurbished Analyzers ranging from Chemistry Analyzers, Hematology Analyzers, to Glucose/Lactate Analyzers. Some of our popular manufacturers include YSI, Cell-Dyn, and Roche.

Multichannel Interface: 1-15 of 122

*Please Select a Category and/or Manufacturer dropdown OR Search By Model Name, # or Keyword.* Advanced Search >
Agilent 35900E HPLC Interface

Agilent 35900E HPLC Interface

Cambridge Scientific ID #'s: 11228, 15239, 9312, 11227

Features:

  • Data buffering
  • Independent analog-to-digital (A/D) converters
  • Real-time control
  • Instrument control ports
  • Host communication
  • Front panel indicators that show run status, interface activity, etc.
  • Compatibility with Agilent data systems
  • External power adapter with 24V DC output
Learn More
Agilent-35900E-HPLC-Interface-11228
By clicking below we can further assist you with your inquiry. Inquire 4 In Stock Worldwide Shipping
Hewlett Packard 35900E HPLC Interface

Hewlett Packard 35900E HPLC Interface

Cambridge ID #: 16332

Features:

  • Data buffering
  • Independent analog-to-digital (A/D) converters
  • Real-time control
  • Instrument control ports
  • Host communication
  • Front panel indicators that show run status, interface activity, etc.
  • Compatibility with Agilent data systems
  • External power adapter with 24V DC output
Learn More
Hewlett-Packard-35900E-HPLC-Interface-16332
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Agilent 1100 Series - G1364A HPLC Fraction Collector

Agilent 1100 Series - G1364A HPLC Fraction Collector

Cambridge ID #: 17472

For Preparative Scale Applications

Specifications:

  • Trigger Modes: Time slices, Peak (threshold, up- /downslope), Timetable (combination of time intervals and peak) and Manual trigger (supported only with G1323BControl Module)
  • Operating Modes: Discrete fractions: default mode for all vessels. The flow is diverted to waste, while moving from one vessel position to the next vessel position Continuous flow: optional, available only when using well plates. It is possible to move from one well plate position to the next one without diverting the flow into the well plate to waste
  • Test tube /plate sizes: Minimum 48 mm to 100 mm maximum
  • Maximum tube volume: ca. 45 ml
  • Maximum flow rate: 100 ml / min (depending on viscosity and generated back pressure, max. 6 bar at the diverter valve)
  • Delay volumes [μl]:
    • Fraction collector inlet to diverter valve: -500 (typical, depends on length of the tubing)
    • Diverter valve: ~15
    • Diverter valve to needle: ~110
    • Needle: -~5
  • Delay calibration Sensor: Single wavelength absorbance detector working at 654 nm, consisting of a LED and a photo diode
  • Diverter Valve: 3/2 Diverter valve with low internal volume (15 μl), switching time < 100 ms, maximum operating pressure 6 bar
  • Cooling: Optional (with additional G1330B), performance depending on ambient conditions and the volume of collected fractions
  • Maximum capacity: 3 fraction collectors in parallel plus one recovery fraction collector connected via 12-Position, 13-Port Selector valve
  • GLP features Early maintenance feedback (EMF), electronic records of maintenance and errors
  • Interfaces: Controller-area network (CAN). optional; LAN or external contacts interface RS232C, APG-remote (for remote start / stop signals to / from other modules) Interface to G1330A Thermostat CAN-DC-out for operation of Agilent approved external devices like valves
  • Safety features: Leak detection and safe leak handling, error detection and display, exhaust fan for fume extraction of hazardous vapors

Can be sold as an individual component or as part of a complete stack

Learn More
Agilent-1100-Series---G1364A-HPLC-Fraction-Collector-17472
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Agilent 1100 Series - G1364B HPLC Fraction Collector

Agilent 1100 Series - G1364B HPLC Fraction Collector

Cambridge Scientific ID #'s: 18542, 18570

For Preparative Scale Applications

Specifications:

  • Trigger Modes: Time slices, Peak (threshold, up- /downslope), Timetable (combination of time intervals and peak) and Manual trigger (supported only with G1323BControl Module)
  • Operating Modes: Discrete fractions: default mode for all vessels. The flow is diverted to waste, while moving from one vessel position to the next vessel position Continuous flow: optional, available only when using well plates. It is possible to move from one well plate position to the next one without diverting the flow into the well plate to waste
  • Test tube /plate sizes: Minimum 48 mm to 100 mm maximum
  • Maximum tube volume: ca. 45 ml
  • Maximum flow rate: 100 ml / min (depending on viscosity and generated back pressure, max. 6 bar at the diverter valve)
  • Delay volumes [μl]:
    • Fraction collector inlet to diverter valve: -500 (typical, depends on length of the tubing)
    • Diverter valve: ~15
    • Diverter valve to needle: ~110
    • Needle: -~5
  • Delay calibration Sensor: Single wavelength absorbance detector working at 654 nm, consisting of a LED and a photo diode
  • Diverter Valve: 3/2 Diverter valve with low internal volume (15 μl), switching time < 100 ms, maximum operating pressure 6 bar
  • Cooling: Optional (with additional G1330B), performance depending on ambient conditions and the volume of collected fractions
  • Maximum capacity: 3 fraction collectors in parallel plus one recovery fraction collector connected via 12-Position, 13-Port Selector valve
  • GLP features Early maintenance feedback (EMF), electronic records of maintenance and errors
  • Interfaces: Controller-area network (CAN). optional; LAN or external contacts interface RS232C, APG-remote (for remote start / stop signals to / from other modules) Interface to G1330A Thermostat CAN-DC-out for operation of Agilent approved external devices like valves
  • Safety features: Leak detection and safe leak handling, error detection and display, exhaust fan for fume extraction of hazardous vapors

Can be sold as an individual component or as part of a complete stack

Learn More
Agilent-1100-Series---G1364B-HPLC-Fraction-Collector-18542
By clicking below we can further assist you with your inquiry. Inquire 2 In Stock Worldwide Shipping
Agilent 1100 Series - G1364C HPLC Fraction Collector

Agilent 1100 Series - G1364C HPLC Fraction Collector

Cambridge Scientific ID #'s: 16028, 16350, 16188, 15885

For Preparative Scale Applications

Specifications:

  • Trigger Modes: Time slices, Peak (threshold, up- /downslope), Timetable (combination of time intervals and peak) and Manual trigger (supported only with G1323BControl Module)
  • Operating Modes: Discrete fractions: default mode for all vessels. The flow is diverted to waste, while moving from one vessel position to the next vessel position Continuous flow: optional, available only when using well plates. It is possible to move from one well plate position to the next one without diverting the flow into the well plate to waste
  • Test tube /plate sizes: Minimum 48 mm to 100 mm maximum
  • Maximum tube volume: ca. 45 ml
  • Maximum flow rate: 100 ml / min (depending on viscosity and generated back pressure, max. 6 bar at the diverter valve)
  • Delay volumes [μl]:
    • Fraction collector inlet to diverter valve: -500 (typical, depends on length of the tubing)
    • Diverter valve: ~15
    • Diverter valve to needle: ~110
    • Needle: -~5
  • Delay calibration Sensor: Single wavelength absorbance detector working at 654 nm, consisting of a LED and a photo diode
  • Diverter Valve: 3/2 Diverter valve with low internal volume (15 μl), switching time < 100 ms, maximum operating pressure 6 bar
  • Cooling: Optional (with additional G1330B), performance depending on ambient conditions and the volume of collected fractions
  • Maximum capacity: 3 fraction collectors in parallel plus one recovery fraction collector connected via 12-Position, 13-Port Selector valve
  • GLP features Early maintenance feedback (EMF), electronic records of maintenance and errors
  • Interfaces: Controller-area network (CAN). optional; LAN or external contacts interface RS232C, APG-remote (for remote start / stop signals to / from other modules) Interface to G1330A Thermostat CAN-DC-out for operation of Agilent approved external devices like valves
  • Safety features: Leak detection and safe leak handling, error detection and display, exhaust fan for fume extraction of hazardous vapors

Can be sold as an individual component or as part of a complete stack

Learn More
Agilent-1100-Series---G1364C-HPLC-Fraction-Collector-16028
By clicking below we can further assist you with your inquiry. Inquire 4 In Stock Worldwide Shipping
Agilent 1100 Series - G1364D HPLC Fraction Collector

Agilent 1100 Series - G1364D HPLC Fraction Collector

Cambridge ID #: 17700

For Preparative Scale Applications

Specifications:

  • Trigger Modes: Time slices, Peak (threshold, up- /downslope), Timetable (combination of time intervals and peak) and Manual trigger (supported only with G1323BControl Module)
  • Operating Modes: Discrete fractions: default mode for all vessels. The flow is diverted to waste, while moving from one vessel position to the next vessel position Continuous flow: optional, available only when using well plates. It is possible to move from one well plate position to the next one without diverting the flow into the well plate to waste
  • Test tube /plate sizes: Minimum 48 mm to 100 mm maximum
  • Maximum tube volume: ca. 45 ml
  • Maximum flow rate: 100 ml / min (depending on viscosity and generated back pressure, max. 6 bar at the diverter valve)
  • Delay volumes [μl]:
    • Fraction collector inlet to diverter valve: -500 (typical, depends on length of the tubing)
    • Diverter valve: ~15
    • Diverter valve to needle: ~110
    • Needle: -~5
  • Delay calibration Sensor: Single wavelength absorbance detector working at 654 nm, consisting of a LED and a photo diode
  • Diverter Valve: 3/2 Diverter valve with low internal volume (15 μl), switching time < 100 ms, maximum operating pressure 6 bar
  • Cooling: Optional (with additional G1330B), performance depending on ambient conditions and the volume of collected fractions
  • Maximum capacity: 3 fraction collectors in parallel plus one recovery fraction collector connected via 12-Position, 13-Port Selector valve
  • GLP features Early maintenance feedback (EMF), electronic records of maintenance and errors
  • Interfaces: Controller-area network (CAN). optional; LAN or external contacts interface RS232C, APG-remote (for remote start / stop signals to / from other modules) Interface to G1330A Thermostat CAN-DC-out for operation of Agilent approved external devices like valves
  • Safety features: Leak detection and safe leak handling, error detection and display, exhaust fan for fume extraction of hazardous vapors

Can be sold as an individual component or as part of a complete stack

Learn More
Agilent-1100-Series---G1364D-HPLC-Fraction-Collector-17700
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Test Equity 115 Environmental Chamber Incubator

Test Equity 115 Environmental Chamber Incubator

Cambridge ID #: 18416

Specification:

 

    • Temperature Range: -73°C to +175°C
    • Control Tolerance: ±0.2°C (Measured at the control sensor after stabilization)
    • Uniformity: ±0.5°C (Variations throughout the chamber after stabilization)
    • Heat-up Transition Time: 5°C/minute typical

 

  • Refrigeration and Heating System

 

    • High Stage Refrigerant: R-404A (Dupont HP-62)
    • Low Stage Refrigerant: R-508B (Dupont SUVA-95)
    • Compressors: 1/2 HP x 1/3 HP Copeland hermetic compressors in a cascade configuration.
    • Condenser: Air cooled
    • Heat of Rejection: 4,000 BTUH (maximum rated chamber load at maximum cooling rate from high temperature soak)
    • Heater Power: 600 Watts
  • Temperature Controller: 256 step, 40 profile, ramp and soak programmable memory. RS-232/485 interface.
  • Limit Controller: Independent high and low temperature limits. Triggers an audible alarm and shuts down the chamber.
  • Power Requirements: Input voltage - 120 V nominal (110 to 126 VAC), 60 Hz, 1 PH, maximum current draw 15 A, recommended minimum service 20 A
  • Inside Dimensions (W x H x D): 16 x 12 x 14 in. (1.55 cubic feet) / 406 x 305 x 353 mm (44 liters)
  • Outside Dimensions (W x H x D): 24 x 61 x 26 in. (610 x 1549 x 660 mm)
  • Chamber Weight: 300 pounds
Learn More
Test-Equity-115-Environmental-Chamber-Incubator-18416
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Heracell 150i CO2 IncubatorImage Coming Soon

Heracell 150i CO2 Incubator

Cambridge ID #: 11169

Description:

Protect valuable samples while optimizing cell growth. Thermo Scientific Heracell 150i CO2 Incubators with Stainless-Steel Chambers provide the ideal in-vitro environment. Clean, reliable and easy to use, they feature fast recovery characteristics and a convenient touchscreen user-interface.

Specifications:

  • Temperature Range: Ambient +3°C to 55°C
  • Disinfection Time: 90°C/9 hr. CO2
  • Concentration Range: 0 to 20%
  • Copper Lining
Learn More
Heracell-150i-CO2-Incubator-11169
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Thermo Forma 3140 CO2 Water Jacketed Incubator

Thermo Forma 3140 CO2 Water Jacketed Incubator

Cambridge Scientific ID #'s: 11942, 11944, 11943

Specifications:             

  • Capacity: 6.5 cu. ft. (184L)
  • CO2 Concentration Range: 0 to 20%
  • O2 Range: 1 to 20%
  • Relative Humidity: Ambient to 95% at 37°C
  • Humidity System: 3L stainless-steel pan
  • Temperature Range: Ambient +5°C to 55°C
  • Temperature Uniformity: ±0.2°C at 37°C
  • Chamber: Polished stainless-steel interior with coved corners
  • Interior D x W x H: 0 x 21.3 x 26.8 in. (50.8 x 54.1 x 68.1cm)
  • Shelving: Stainless steel
  • Exterior L x W x H: 25 x 26.0 x 39.5 in. (63.5 x 66.0 x 110.3cm)
  • Port(s): Chamber thru-wall access port with filter; RS-485 interface (optional)
  • Net Weight: 265 lb. (120.2kg)
  • Shipping Weight: 324 lb. (147kg)
Learn More
Thermo-Forma-3140-CO2-Water-Jacketed-Incubator-11942
By clicking below we can further assist you with your inquiry. Inquire 3 In Stock Worldwide Shipping
BioTek 405TSRVSQ Microplate Washer

BioTek 405TSRVSQ Microplate Washer

Cambridge ID #: 17377

The 405 TS Microplate Washer is the gold standard in microplate washing. It features the patented Verify technology, which runs an automated QC check for manifold tube blockage, and visually reports any failed wells. The patented Ultrasonic Advantage can then be used to automatically and thoroughly clean the aspirate and dispense manifold. The 405 TS is the first self-checking, self-maintaining microplate washer available! Cell-based assays and microsphere-based assays are easily run with the 405 TS's unique set of available features and modules for gentle washing vacuum filtration and biomagnetic separation.

 

Features:

  • 96- and 384-well microplates
  • 4 Buffer Switching
  • Ultrasonic Advantage
  • Biomagnetic Speration
  • Vacuum Filtratiion
  • Resistive touch screen display works with gloves
  • Onboard computer with extensive, intuitive software
  • Context-sensitive help, instructional videos and pre-defined
  • sample programs for easy operation
  • Automated internal 4-buffer switching option
  • Quick change manifold design
  • Gentle dispense for non-disruptive cell washing
  • Patented Dual-Action manifold for overfill washing
  • Available patented Verify Technology for clog detection
  • Patented Ultrasonic Advantage automated manifold cleaning
  • Pre-programmed maintenance routines ensure trouble-free operation

 

Specifications

  • USB Connections: 2
  • Width (Metric): 35.6cm
  • Depth (Metric): 43.2cm
  • Height (Metric) 25.4cm
  • Weight (Metric): With Internal Buffer Switching: 16.5kg; Without Internal Buffer Switching: 13.5kg
  • Hertz: 50/60Hz
  • Voltage: 100 to 240V
  • For Use With (Application): ELISA, MSD assays, HCS immune cytochemistry, FLIPR Ca2+ flux, Cell-based assays, Magnetic and polystyrene bead processing (gene expression assays, cytokine assays), ELISPOT assays
  • Assays: ELISA, Cell-based assays (model dependent), Magnetic and polystyrene bead, Multiplex assays, Bead-based ELISAs, Filtration-to-waste processes
  • Fluid Delivery Type: Internal positive displacement pump
  • Electrical Requirements: 100 to 240V 50/60Hz
  • Soak Time: Programmable in minutes and seconds, up to 60 min.
  • Display: LED
  • Automation Interface: High res LED backlit touch screen for instrument control
  • Width (English): 14 in.
  • Depth (English): 17 in.
  • Height (English): 10 in.
  • Weight (English): With Internal Buffer Switching: 36 lb.; Without Internal Buffer Switching: 30 lb.
  • Type: Microplate Washer w/4-Buffer switching, ultrasonic advantage, optimized cell washing
  • Volume (Metric) Residual: ≤2μL/well
  • Volume (Metric) Wash: 25 to 3000μL/well
  • Flow Rate: 1 to 11
  • Well Count: 96/384
Learn More
BioTek-405TSRVSQ-Microplate-Washer-17377
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Fisher Scientific 4635 Shaker

Fisher Scientific 4635 Shaker

Cambridge ID #: 17848
  • Digital Port: One RS 232 C Interface
  • Learn More
    Fisher-Scientific-4635-Shaker-17848
    By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
    Cole Parmer 74900-10 Syringe Pump

    Cole Parmer 74900-10 Syringe Pump

    Cambridge ID #: 9470

    Specifications:

    Dual Syringe Infusion Pump

    Wide range (100,000:1) allows flow rates from a slow trickle to a steady stream


    RS-232 interface lets you easily control pumps from your computer

    • Max Flow Rate Per Syringe (mL/min): 147
    • Linear Force (lbs): 40
    • Syringe Size Accepted (Max mL): 140
    • Syringe Size Accepted (Min microL): 10
    • Syringe Travel Rate (mm/min): Maximum: 126.7
    • Reproducibility: ±0.1%
    • Accuracy: ±<1%
    Learn More
    Cole-Parmer-74900-10-Syringe-Pump-9470
    By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
    BD BioScience Accuri C6 Flow Cytometer

    BD BioScience Accuri C6 Flow Cytometer

    Cambridge Scientific ID #'s: 18533, 18125

    Features:

    • BD CSampler- 96 well plate and 24 tube rack automated sampler for BD Accuri C6 flow cytometer  
    • Blue and red laser
    • Two light scatter detectors
    • Optical filters such as FITC, PE, PerCP and APC
    • A compact optical design, fixed alignment, and pre-optimized detector settings make the system easier to use
    • Optional filters and the Selectable Laser Module expand the available fluorochrome combinations
    • Compact system and portable weight (13.6 Kg)
    • Intuitive interface of the software
    • Measures: 11 x 14.75 x 16.5 inches (H x W x D) (27.9 x 37.5 x 41.9 cm)
    Learn More
    BD-BioScience-Accuri-C6-Flow-Cytometer-18533
    By clicking below we can further assist you with your inquiry. Inquire 2 In Stock Worldwide Shipping
    Benchmark Scientific Accuris SmartReader 96 MR9600 *NEW* Microplate Visible/Absorbance Reader

    Benchmark Scientific Accuris SmartReader 96 MR9600 *NEW* Microplate Visible/Absorbance Reader

    Cambridge ID #: 18282

    The SmartReader 96 comes complete with 4 popular filters: 405,450,492,630nm and twenty six additional filters are available separately to cover a full range from 340 to 750nm.  The integrated filter wheel allows up to 8 filters to be loaded at once, and filters can be selected during programming. Up to two filters can be used for 2 measurements of the sample plate, for calculated comparisons.  Kinetic calculations can be performed by setting multiple readings. The SmartReader 96 is a convenient stand alone reader, all software and the programing system is incorporated into the electronics. However, a convenient USB port on the side allows quick and easy saving of data files to a USB drive, and the universal .csv files can then be shared or transferred to a computer for storage or further processing.  A data port can be used for connecting a computer or basic printer.

     

    Specification:

     

    • Control and Display: 7 inch touch screen (800 x 480 pixels)
    • Light Source: Quartz-halogen lamp 6V/10W
    • Wavelength Range: 340-750nm (405, 450, 492 and 630 nm filters included)
    • Half-Bandwidth of filter: 3~9nm
    • Readout Range: 0~4.000 Abs
    • Linearity (405nm): 0~2.000 Abs <+1% / 0~4.000 Abs <+2%
    • Precision: CV</= 0.2% (0-3) Abs ; CV</= 01.0% (3-4) Abs
    • Test Speed: <6 sec. for 96 well plate
    • Shaking: 3 modes - slow, medium, fast
    • User Interface: Integrated software and touch screen control
    • Storage: 200 programs; 100,000 test records
    • Ports: USB ports for PC, printer, mouse and flash drive
    • Dimensions: 295x440x225 mm (11.6 x 17 x 8.75 inches)
    • Weight: 10 kg
    Learn More
    Benchmark-Scientific-Accuris-SmartReader-96-MR9600-*NEW*-Microplate-Visible-Absorbance-Reader-18282
    By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
    Beckman Coulter AcT 10 Hematology/Chemistry AnalyzerImage Coming Soon

    Beckman Coulter AcT 10 Hematology/Chemistry Analyzer

    Cambridge ID #: 10921

    Description:

    The Beckman Coulter Ac·T 10 is an affordable, automated blood analyzer that provides whole blood and pre-dilute capabilities for the low-volume office labs and smaller laboratories.

    Specifications:

    • Offers 10 parameters: WBC, RBC, Hgb, Hct, MCV, MCH, MCHC, Plt, Lymph # and Lymph %
    • One step sample processing with touch screen user interface
    • Automated probe wipe safely cleans the probe
    • Small 12 µL sample size permits whole blood analysis from both venous and capillary collections
    • Compact design lets you put the Ac·T Series anywhere
    • Minimum 50 samples per hour with STAT capability
    • Zero routine maintenance requirements and high system reliability help contain costs
    Learn More
    Beckman-Coulter-AcT-10-Hematology-Chemistry-Analyzer-10921
    By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping