Used Lab Equipment

Includes:

• Agilent 6890 Plus Gas Chromatograph
• 7683 100 Vial Autosampler with Injector Tower

• Agilent 5973
• Edwards RV3 Vacuum Pump
• Computer Loaded with Chemstation Software
• Monitor

Specifications:

Mass Spectrometer:  

• Mode (standard): EI
• Modes (optional): PCI, NCI EI with CI source
• Ion source type: 5 - 241.5 eV
• Ionization energy: 0 - 315 uA
• Ionization current: 100 - 350 'C
• Transfer line temperature: 150 - 300 'C
• Quadrupole temperature: 150 - 200 'C
• Mass filter: Monolithic hyperbolic quadrupole
• Mass filter protection: Entrance lens
• Mass range:6 - 800 amu
• Mass resolution: Unit mass adjustable by tune
• Mass axis stability: Better than 0.10 amu/ 48 h
• Detector: EM with replacement horn
• Dynamic range (electronic): 10e6
• Scan rate (electronic): 10,000 amu/s
• Write-to-disk: 8,000 amu/s
• SIM: 30 ions x 50 groups
• Pumping system: Turbomolecular pump
• Total flow: 2 mL/min (standard turbo)

Gas Chromatograph: 

• Automatic injector (optional): Automatic alignment, fast injection
• Liner replacement: Compatible with optional flip-top inlet sealing system
• Injector: Split-splitless (standard), others available
• Oven temperature: Ambient +4 - 450 'C
• Oven ramps / plateaus: 6-7
• Carrier gases: Helium, hydrogen, nitrogen, argon
• Electronic pnuematic control: Auto pressure regulation for split/splitless, septum purge
• Carrier gas control modes: Constant pressure and flow modes; pressure and flow programmable
• Pressure range: 0 - 100 psi (standard), 0 - 150 psi (optional) with 0.01 psi resolution, pressure and temperature corrected
• Retention-time locking:RTL ready
• Flow control: Compatible with optional microfluidics controller

Description:

Increase valuable laboratory storage space with Thermo Scientific CryoPlus Storage Systems, which store up to 38,500 vials (2.0mL). The ideal combination of liquid nitrogen, storage reliability and microprocessor technology, the CryoPlus Series LN2 Storage system provides precise and accurate control over all parameters without complicated programming.

Specifications:

• Type: Auto-Fill LN2 Cryo
• Liquid Nitrogen Capacity (liters): 90
• Static Holding Days: 30
• Static Evaporation Rate (liters/days): 3
• Vial Capacity: 5500 - 6318
• Weight Empty: 194 lbs (88 kg)
• Weight Full: 354 lbs (160.6 kg)
• Exterior Height: 41 in (104.1 cm)
• Exterior W x D: 21.5 x 26 in (54.6 x 66 cm)  
• Usable Interior Height: 27.5 in (69.9 cm)
• Usable Interior Diameter: 16 in (40.6 cm)
• Electrical:
  • 100 - 120 VAC, 1 PH, 50/60 Hz, 0.8 FLA
  • 200 - 230 VAC, 1 PH, 50/60 Hz. 0.5 FLA

Increase valuable laboratory storage space with Thermo Scientific™ CryoPlus™ Storage Systems, which store up to 38,500 vials (2.0mL). The ideal combination of liquid nitrogen, storage reliability and microprocessor technology, the CryoPlus Series LN2 Storage system provides precise and accurate control over all parameters without complicated programming.

Specifications:

• Capacity: 200 L
• Power Requirements:100/120V, 50/60Hz
• Diameter:24 in
• Exterior Dimensions:34 x 28.5 x 41 in
• Weight:325 lb
• Vial Capacity: 13,000

This VWR dry bath/incubator is a multi-purpose unit ideal for incubation and activation of cultures, enzyme reactions, blood urea nitrogen determinations, immunoassays, melting/boiling points, and a variety of other laboratory procedures. These high wattage, constant-temperature block heaters are economical and versatile. Requires minimum bench space and features convenient front-mounted temperature adjustment knobs providing high and low temperature control. Accepts separate interchangeable modular blocks (can be purchased separately), which accommodate various sample enclosures such as vials, microplates, PCR strips, and a wide variety of tubes. Each block contains a thermometer well, and features close tube-and-block contact for maximum heat retention.

Specifications:

• Temperature Range:5° above ambient to 150°C
• Temperature Stability:±2°C
• Temperature Uniformity: ±5°C
  

Features:

This VWR dry bath/incubator is a multi-purpose unit ideal for incubation and activation of cultures, enzyme reactions, blood urea nitrogen determinations, immunoassays, melting/boiling points, and a variety of other laboratory procedures. These high wattage, constant-temperature block heaters are economical and versatile. Requires minimum bench space and features convenient front-mounted temperature adjustment knobs providing high and low temperature control. Accepts separate interchangeable modular blocks (can be purchased separately), which accommodate various sample enclosures such as vials, microplates, PCR strips, and a wide variety of tubes. Each block contains a thermometer well, and features close tube-and-block contact for maximum heat retention.

Specifications:

Temperature Range: 5° above ambient to 150°C

Temperature Stability: ±2°C

Temperature Uniformity: ±5°C

Features:

• Hydraulic thermostat
• Two fixed wire shelves, three door shelves
• Aluminium evaporator coil
• Manual defrost

Specifications:

• Capacity: 5.0 cubic ft.
• Temperature Range: -4° to 5°
• Net Wt.: 85 lbs
• Exterior Dimensions: (H x W x D) 33.5 x 21.5 x 29.5 in

Power Requirements: 120V, 60Hz, 132W, 1.1A

Features:

Biosafe Alpha is a small aluminium storage and transport container for liquid nitrogen. Biosafe Alpha containers are available in 10, 20 and 25 litre capacities.

Specifications:

• Temperature: Up to -196°C
• Capacity: 12.2 L
• Daily evaporation: 0.18 L/day
• Weight: 7.5 kg (empty)
• Dimensions: 530 x  308mm (H x D)

Features:

Biosafe Alpha is a small aluminium storage and transport container for liquid nitrogen. Biosafe Alpha containers are available in 10, 20 and 25 litre capacities.

Specifications:

• Temperature: Up to -196°C
• Capacity: 21.5 L
• Daily evaporation: 0.18 L/day
• Weight: 11 kg (empty)
• Dimensions: 535 x  388mm (H x D)

Features:

Biosafe Alpha is a small aluminium storage and transport container for liquid nitrogen. Biosafe Alpha containers are available in 10, 20 and 25 litre capacities.

Specifications:

• Temperature: Up to -196°C
• Capacity: 26 L
• Daily evaporation: 0.2 L/day
• Weight: 13.5 kg (empty)
• Dimensions: 612 x 388mm (H x D)

Features:

Mobile storage tank for cryogenic liquefied nitrogen. With vacuum super insulation and long-term vacuum protection. Approved according to the European Pressure Equipment Directive PED. Transport in unpressurized condition with transport plug fitted.

Specifications:

• Temperature: Up to -196°C
• Content, geometric: 99,2 L
• Operating overpressure: 1,3 bar
• Weight: 62 kg (empty)
• Evaporation rate: 1,2 %/day
• Dimensions: 114 x 50 x 65 cm (H x D x W)

Features:

Mobile storage tank for cryogenic liquefied nitrogen. With vacuum super insulation and long-term vacuum protection. Approved according to the European Pressure Equipment Directive PED. Transport in unpressurized condition with transport plug fitted.

Specifications:

• Temperature: Up to -196°C
• Content, geometric: 149,5L
• Operating overpressure: 1,3 bar
• Weight: 79 kg (empty)
• Evaporation rate: 1 %/day
• Dimensions: 146 x 50 x 65 cm (H x D x W)

Features:

Mobile storage tank for cryogenic liquefied nitrogen. With vacuum super insulation and long-term vacuum protection. Approved according to the European Pressure Equipment Directive PED. Transport in unpressurized condition with transport plug fitted.

Specifications:

• Temperature: Up to -196°C
• Content, geometric: 198,5L
• Operating overpressure: 2,0 bar
• Weight: 100 kg (empty)
• Evaporation rate: 0,6 %/day
• Dimensions: 117 x 70 x 80 cm (H x D x W)

Features:

Mobile storage tank for cryogenic liquefied nitrogen. With vacuum super insulation and long-term vacuum protection. Approved according to the European Pressure Equipment Directive PED. Transport in unpressurized condition with transport plug fitted.

Specifications:

• Temperature: Up to -196°C
• Content, geometric: 348 L
• Operating overpressure: 2,0 bar
• Weight: 160 kg (empty)
• Evaporation rate: 0,5 %/day
• Dimensions: 165 x 70 x 80 cm (H x D x W)

Features:

Mobile storage tank for cryogenic liquefied nitrogen. With vacuum super insulation and long-term vacuum protection. Approved according to the European Pressure Equipment Directive PED. Transport in unpressurized condition with transport plug fitted.

Specifications:

• Temperature: Up to -196°C
• Content, geometric: 49,5 L
• Operating overpressure: 1,3 bar
• Weight: 44 kg (empty)
• Evaporation rate: 2 %/day
• Dimensions: 80 x 50 x 65 cm (H x D x W)

The Mini Spray Dryer B-290 is the laboratory equipment of your choice for the quick and gentle drying to powder of liquid end products. The impressive features of the Spray Dryer include its efficient performance with very short set-up times, an effective integrated nozzle cleaning mechanism and a high degree of flexibility thanks to the different cylinder geometries. Whether the requirement is the gentle drying of natural product dyestuffs, the isolation of highly effective pharmaceutical active agents, or the micro-encapsulation of aromas – the B-290’s outstanding features greatly extends the number of applications that are possible with a  spray drying process

Includes:

• Buchi B-290 Mini Spray Dryer w/ Glassware (as shown)
• Standard Glassware
• Advanced Cylinder Shield
• New Nozzle Assembly
• Aspirator Recently Cleaned

Specifications:

• Power consumption: max. 2900 W
• Connection voltage: 200-230 V ± 10 %
• Frequency: 50/60 Hz
• Evaporating capacity: 1.0 l/h H2O, higher for organic solvents
• Airflow: max. of 35 m3/h
• Motor control: Frequency converter
• Max. temperature input: 220 °C
• Heating capacity: 2300 W
• Heating control: PT-100, fuzzy logic, control accuracy ± 3 °C
• Interface: Serial port RS-232 for all parameters
• Spray gas: Compressed air or nitrogen / 200 - 800 l/h; 5 - 8 bar
• Nozzle tip diameter: 0.7 mm standard, other sizes 1.4 and 2.0 mm available
• Possible particle diameter range: 1 - 25 μm
• Mean residence time: 1.0 - 1.5 sec.
• Pollution degree: 2
• Installation category: II
• Dimensions (W x H x D): 65 x 110 x 70 cm
• Weight: 46 kg