Cambridge Scientific
Used Lab Equipment

Used Lab Equipment

We offer an assortment of used and refurbished Ovens and Furnaces ranging from General Purpose Ovens, Mechanical Ovens and Gravity Convection Ovens, Forced Air Ovens, Vacuum Ovens to Hybridization Ovens. Some of our popular manufacturers include Fisher, VWR, Lindburgh, Blue M, Precision, Thermolyne and Napco.

Oven Sample Processor: 1-15 of 354

*Please Select a Category and/or Manufacturer dropdown OR Search By Model Name, # or Keyword.* Advanced Search >
Waters Acquity Sample manager UPLC Sample Manager

Waters Acquity Sample manager UPLC Sample Manager

Cambridge Scientific ID #'s: 15340, 15769

Specifications:

  • Number of sample plates: Total of two plates, expandable to up to 22 plates with optional Sample Organizer (see below):
    • 96 and 384 microtiter plates
    • 48 position 2.00-mL vial plates
    • 48 position 0.65-mL micro-centrifuge tube plates
    • 24 position 1.50-mL micro-centrifuge tube plates
  • Maximum sample capacity: 768 in two 384-well plates; expandable to up to 8,448 samples with optional Sample Organizer
  • Number of sample injections: 1 to 99 injections per sample
  • Injection volume range: 0.1 to 50.0 iJL, in 0.1 iJL increments, partial or full loop mode; 10ul loop is standard; 1, 2, 5, 20, and 50-uL loops also available
  • Sample delivery precision(full loop injection mode): < 0.3% RSO, full loop, standard lO-iJL loop (default wash/purge conditions), per Waters AQT/SystemsQT protocol
  • Sample delivery precision(PLNO injection mode): < 1% RSO within 20% to 75% of loop volume for 1, 2, 5, 10, 20, and 50-iJL loops, UV detection
  • Injector linearity: > 0.999 coefficient of deviation (from 20% to 75%, partial loop overfill mode (PLNO injection mode), per Waters' AQT/SystemsQT protocol
  • Sample temperature control:0 to 40.0 ·C, settable in 0.1 ·C increments (assumes an ambient temperature of 25.0 ·C). At an ambient temperature of 21.0 ·C or lower the sample manager will maintain the temperature of the sample compartment down to 4.0 ·C with a tolerance of -2.0/+6.0 ·C, when configured with the maximum number of vials and/or plates
  • Injection cycle time:
    • < 15 sec between multipe injections with "load ahead" enabled
    • 30 sec with single weak wash, lO-iJL loop, pressure assist mode
  • Sample probe: XYZZ based needle-in-needle design
  • Minimum sample required: 5 uL residual, using maximum recovery 2-mL vials (zero offset)
  • Wash solvents: Two degassed: strong solvent and weak wash solvent, programmable to suit application
  • Sample carryover: < 0.005% or < 2.000 nL, whichever is greater
  • Advanced operations: Loop off-line mode, load ahead
  • Unattended operation: Leak sensors, full diagnostic data control captured through console software
  • Primary wetted material: Titanium alloy, 316 stainless steel, fluoropolymer, fluoroelastomer, PPS alloy, PEEK alloy, PPS, PEEK, OLC coating, gold
Learn More
Waters-Acquity-Sample-manager-UPLC-Sample-Manager-15340
By clicking below we can further assist you with your inquiry. Inquire 2 In Stock Worldwide Shipping
Thermo Shandon Excelsior Tissue Processor

Thermo Shandon Excelsior Tissue Processor

Cambridge Scientific ID #'s: 7965, 9986

Specifications:

 

  • Specimen Agitation Type: Rotary
  • No. of Processing Chambers: 1
  • Reagent Capacity: 5L
  • Width (English): 28 in.
  • Width (Metric): 710mm
  • Depth (English): 23 in.
  • Depth (Metric): 580mm
  • Height (English): 54 in. (top of monitor)
  • Height (Metric): 1370mm (top of monitor)
  • Weight (English): 363 lbs. (empty)551 lbs. (full)
  • Weight (Metric): 165 kg (empty)250 kg (full)
  • Voltage: 100-240V
  • Hertz: 50/60Hz
Learn More
Thermo-Shandon-Excelsior-Tissue-Processor-7965
By clicking below we can further assist you with your inquiry. Inquire 2 In Stock Worldwide Shipping
Thermo Shandon Excelsior ES Tissue Processor

Thermo Shandon Excelsior ES Tissue Processor

Cambridge ID #: 15596

Specification:

 

  • Capacity 222 Cassettes (Organized Basket) 300 Cassettes (Random Basket)
  • Depth 52cm (20.5 in.)
  • Width 67cm (26.5 in.)
  • Height 160cm (63 in.)
  • Weight 112kg (246.5 lb.)

 

Features:

 

  • Daily Operations Mode, an easy-to-use operating mode for routine operation
  • Systematic logging and reporting of quality control data, event records, and program information
  • Automatic in-process reagent rotation—no manual handling of reagents
  • Three distinct fill levels in chamber to shorten processing times
  • Ten customized programs and five flush options
  • Seven password-protected areas
  • Easy-to-read screens with colorful graphics; multilingual

 

Performance:

 

  • Unique reagent monitoring and management system delivers significant reagent cost savings
  • Reagent quality of first alcohol is measured using specific gravity and alerts operator when replenishment is needed
  • Reagent preheating option allows for more consistent and rapid processing
  • Circular design allows greater temperature uniformity
  • Continuous agitation circulates reagents freely around specimens
  • Baskets are designed for maximum reagent infiltration around specimens by preventing cassette bunching
  • Glass lid allows viewing during processing
  • Baskets are microwavable and can be used in conjunction with microwave post-fixation

 

Safety:

 

  • Built-in downdraft ventilation minimizes operator exposure to hazardous vapors when the reaction chamber lid is open
  • Reagent storage cabinet is built to enhance safety and is vented through two additional filters for further fume control
  • Battery backup provides for specimen protection by safely completing transfer of reagents during power interruptions
  • Two independent remote alarms alert user when away from unit or after hours
  • Automatic underfill recovery finishes processing in safest environment possible
Learn More
Thermo-Shandon-Excelsior-ES-Tissue-Processor-15596
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Shandon Hypercenter XP Tissue ProcessorImage Coming Soon

Shandon Hypercenter XP Tissue Processor

Cambridge ID #: 7622

Description:

The Thermo Scientific Hypercenter XP, also called the Shandon Hypercenter XP is a computer-controlled, fluid transfer tissue processor with automated fixation, dehydration, cleaning and paraffin infiltration features for tissue specimens. The Shandon Hypercenter XP features a Reagent Storage Module that does not allow reagent fumes to vent into laboratory atmosphere while it is in operation. This Shandon tissue processor also carries a flexible air bag which maximizes the system's air capacity, and an emergency carbon filter is utilized as an additional safety feature and only works if there is excess pressure. The Hypercenter XP tissue processor is design with an organized capacity of 180 cassettes, and can be configured as either a floor model or bench-top model. The Hypercenter XP enhances workflow with its One Command Module that can control up to five reaction and storage modules for processing capacity of up to 900 cassettes per load. Additionally, the multi-lingual processor software XP allows the operator to save as much as 9 customized programs and accommodate year 2000 changes. The Hypercenter XP Portable Wax Station also offers the option of a third wax bath which can be used as a final cleaning stage in the wax impregnation of specimens. The Wax Station can be conveniently located to the side of the Hypercenter XP Reaction Module, so that wax-impregnated specimens can be transported safely to an embedding station without messy wax spillages.

Specifications:

  • Dimensions:
    • Command Module: 12" x 18" x 10" (30.48 x 45.72 x 25.40 cm)
    • Reaction Module: 18" x 13" x 24" (45.7 x 33.0 x 60.9 cm)
    • Height of Storage Module/Wheels Attached: 27.5" (69.9 cm)
    • Total Height: 46" (116.8 cm)
  • Weight
    • Command Module: 20 lbs. (9.1 kg)
    • Reaction Module: 103 lbs. (46.7 kg)
    • Shipping Weight: 400 lbs (181.4 kg)
    • Agency Approvals: Designed to meet IEC 1010, CSA, and UL
  • Power Requirements
    • Command Module: 120 V, 60 Hz, 150 VA
    • Reaction Module: 1200 VA
Learn More
Shandon-Hypercenter-XP-Tissue-Processor-7622
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Genevac EZ-2 PLUS Sample Concentrator

Genevac EZ-2 PLUS Sample Concentrator

Cambridge ID #: 19750

Genevac designed the EZ-2plus with the specific requirements of lead optimization in mind. Years of experience in solvent evaporation and sample purification allow Genevac to produce a high-efficiency sample concentrator that is high performance, easy to use, very reliable and compatible with almost all commonly used solvents and acids.

 

The EZ-2 Series is the culmination of an extensive research and development program that draws on the expertise of Genevac’s engineers and the experiences of many scientists in the laboratory. Using the most advanced  proven technology in evaporation science, the EZ-2 Series has been designed specifically for solvent removal in life science research, be that concentration of samples or complete drying. Genevac’s fifteen years of experience in vacuum engineering has resulted in the creation of a compact sample concentrator combining great performance, ease of use greater than a rotary evaporator and compatibility with all commonly used solvents and acids.

Learn More
Genevac-EZ-2-PLUS-Sample-Concentrator-19750
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Qiagen QiaSymphony AS/SP Sample Prep Workstation

Qiagen QiaSymphony AS/SP Sample Prep Workstation

Cambridge ID #: 19462

With a dedicated range of QIAsymphony Kits, the QIAsymphony AS/SP enables sample preparation of DNA, RNA, and bacterial and viral nucleic acids from a wide range of starting materials. The QIAsymphony AS extends the capabilities of the QIAsymphony SP by integrating automated PCR assay setup, which, in combination with the Rotor-Gene Q and QIAGEN real-time and end-point PCR kits, enables you to optimize your PCR workflow and maximize your efficiency.

Specifications:

  • This system includes the Rotor-Gene Q
  • Altitude: Up to 2000 m
  • Elution Volume: 30 – 500 uL
  • Humidity: 15-75% (relative, noncondensing), maximum 75%
  • Input Volume: 200 uL
  • Dimensions: 128 x 103 x 73 cm
  • Operating Temperature: 15 - 32°C
  • Power Requirements: 100-240V, 50/60Hz
  • Storage Temperature: 5 - 40°C
Learn More
Qiagen-QiaSymphony-AS-SP-Sample-Prep-Workstation-19462
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Waters Sample Organizer UPLC Autosampler Loader

Waters Sample Organizer UPLC Autosampler Loader

Cambridge Scientific ID #'s: 14266, 14267, 14268

The ACQUITY UPLC Sample Organizer increases the level of automation and sample processing throughput of the ACQUITY UPLC System. It extends the capacity of the system by more than tenfold for samples in standard ANSI-compliant 96 or 384 well plates; or more than threefold for samples in conventional 2 mL vials.

 

Features:

  • Plates are transferred in a programmable order from the Sample Organizer to the ACQUITY UPLC System Sample Manager for processing
  • Plate exchange shuttle replaces a plate in the Sample Manager within 15 seconds to support high sample-throughput processing
  • Shelves accessed through the large swing-open front door and slide in easily
  • Accepts any combination of ANSI-compliant well plates and vial holders
  • Temperature control of 4 to 40 °C in 1 °C increments
  • Small footprint
  • Sample capacities:
    • 22 standard ANSI/SBS-compliant 96 or 384 well plates
    • 12 intermediate well plates
    • 8 x 48 – 2mL vials
    • 8 x 24 – 4mL vials
Learn More
Waters-Sample-Organizer-UPLC-Autosampler-Loader-14266
By clicking below we can further assist you with your inquiry. Inquire 3 In Stock Worldwide Shipping
Lab-Line 120 OvenImage Coming Soon

Lab-Line 120 Oven

Cambridge ID #: 18389
This item is new to the Cambridge Scientific Used Lab Equipment Inventory. As a result, a product description is currently unavailable. For further information about this product, please inquire and a representative will contact you shortly.
Learn More
Lab-Line-120-Oven-18389
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
VWR 1400E Vacuum Oven

VWR 1400E Vacuum Oven

Cambridge Scientific ID #'s: 18307, 18306

Specification:

 

  • Net weight: 50 lbs.
  • Shipping weight: 62 lbs.
  • Exterior dimensions (W x D x H): 15.5 x 16.5 x 22 in.
  • Interior dimensions (W x D x H): 9 x 12 x 9 in.
  • Capacity: 0.6 cubic feet
  • Temperature range: 40 to 210°C
  • Temperature uniformity: +3.5°C @ 100°C; +5.0°C @ 200°C
  • Temperature rise time: 30 min. to 100°C
Learn More
VWR-1400E-Vacuum-Oven-18307
By clicking below we can further assist you with your inquiry. Inquire 2 In Stock Worldwide Shipping
VWR 1430D Vacuum Oven

VWR 1430D Vacuum Oven

Cambridge ID #: 13425

The perfect choice for uniform high temperature larger capacity applications. Chambers are constructed of Type 302 stainless steel to provide corrosion-resistant, contamination-free service. They will maintain a vacuum of up to 10 microns or better.  This oven has interior ½” thick glass door and exterior stainless steel door.

Specifications:

  • Metal: Stainless Steel, Inside and Out
  • Controller Type: Solid-state, Digital-read
  • Temperature range: 40 to 260 C
  • Style: Digital Vacuum
  • Capacity, Cubic Feet: 1.7
  • Dimensions: 25Wx25Dx21H”
  • Dimensions: 12Wx20Dx12H”
  • Shelves: 2
  • Electrical: 220V
  • Shipping Weight: 200 lbs.
Learn More
VWR-1430D-Vacuum-Oven-13425
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
VWR 1601 Horizontal Air Flow Oven

VWR 1601 Horizontal Air Flow Oven

Cambridge ID #: 7999

VWR 1601 Horizontal Air Flow Cleanroom Oven

Specifictions:

  • Chamber Dimensions: 16 x 19 x 19
  • Capacity: 3.7 cu ft
  • Temperature Range: 40° to 200°C
  • 2 shelves
Learn More
VWR-1601-Horizontal-Air-Flow-Oven-7999
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Precision 25EM Mechanical Convection OvenImage Coming Soon

Precision 25EM Mechanical Convection Oven

Cambridge ID #: 18302

Precision Economy Ovens deliver a maximum temperature of 210°C, making them ideal for a wide range of heating and drying applications, including: Glassware drying, sterilization, plant tissue drying, textile/paper/rubber drying, aging and curing stidues, stabilitiy testing, and etc. Gravity convection ovens are ideal where forced air circulation cannot be tolerated and for situations demanding gentle curing or long term sample storage under closely controlled conditions. Models 25EM and 45EM use mechanical convection as a method of heat transfer. Mechanical convection can be defined as a positive and planned directional air flow or forced air circulation within the chamber. Mechanical convection ovens provide the most efficient means of heat transfer as well as the most reproducible test conditions for repeat operations. Mechanical convection allows for rapid heat up time for high density loads, shortened recovery periods after door openings and improved uniformity for extremely heat sensitive samples. All models use a hydraulic thermostat for temperature safety limit control.

 

Specification:

 

  • Convection Technique: Mechanical
  • Temperature Control: Electronic
  • Temperature Display: 0° to 250°C Thermometer
  • Temperature Range Sensitivity: 50° to 210°C  ±0.3°C
  • Chamber Dimensions: 15.5 x 18.5 x 15 in (390 x 470 x 380 mm)
  • Exterior Dimensions: 21.5 x 24 x 28 in. (550 x 610 x 715 mm)
  • Net Weight:  103 lbs., 46.7 kg
  • Chamber Volume: 2.5 cu.ft. / 71.5 liters
  • Shelves: 2 supplied, 6 maximum
  • Electrical Data: 115V, 1.3 kW, 11.3 A / 230V, 1.3 kW, 5.6 A
Learn More
Precision-25EM-Mechanical-Convection-Oven-18302
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Fisher Scientific 285 Vacuum OvenImage Coming Soon

Fisher Scientific 285 Vacuum Oven

Cambridge ID #: 19347
This item is new to the Cambridge Scientific Used Lab Equipment Inventory. As a result, a product description is currently unavailable. For further information about this product, please inquire and a representative will contact you shortly.
Learn More
Fisher-Scientific-285-Vacuum-Oven-19347
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Precision 51221135 Mechanical Convection Oven

Precision 51221135 Mechanical Convection Oven

Cambridge ID #: 18004

Specifications:

  • Temperature Range: 50­°C to 210°C
  • Power: 115V. 1800W
  • Dimensions: 24" x 22" x 36
Learn More
Precision-51221135-Mechanical-Convection-Oven-18004
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Fisher Scientific 625G Gravity Oven

Fisher Scientific 625G Gravity Oven

Cambridge ID #: 15651

 

Specifications:

  • Temperature range: 50° to 225°C (122° to 437°F)
  • Capacity: 70.79L
  • BTU per Hour: 1325 at 200°C
  • Chamber Material: Stainless Steel

 

Description:

  • Three sizes available
  • Quick, easy temperature setting
  • Backup temperature control
  • Fast temperature recovery time
  • Indicator lights show which thermostat is controlling oven temperature
  • Durable powder-coated steel exterior
  • Corrosion-resistant, easy to clean, stainless-steel interior
  • Exterior remains at safe temperature
  • Adjustable shelf heights
  • Oven temperature can be monitored in port on top
  • Door opens 180° and features grabber-type latch
  • Nonslip black synthetic rubber feet
 
Learn More
Fisher-Scientific-625G-Gravity-Oven-15651
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping