Used Lab Equipment

Features:

Designed for rapid but controlled filling of a variety of containers without splashing or frothing. The Perimatic GP represents a lower cost alternative to the Premier yet still offers many of its features. It can also be used as a transfer pump in forward or reverse mode. Features manual dispensing by hand or footswitch, and automatic dispensing with interval timer. It can be used with a XY robotic module for automated filling of multiple containers.

Specifications:

• Dispensing range:5 to 9999.9 mL
• Accuracy: ±1,0% for volumes over 20 mL
• Repeatability: <1%
• Microprocessor calibration
• Memory to store calibration values, volumes and set-ups for various tubing sizes
• Sequential slow/fast/slow dispensing

The Multidrop 384 Reagent Dispenser portions a wide range of solutions into 96- and 384-well plates across a 5 to 395μL volume range, providing reliable microvolume dispensing for pharmaceutical and biotechnology laboratories. It offers precise and reproducible dispensing results, high speed dispensing for high assay throughput, easy setup and easy integration with different robotic setups.

Specifications:

• Plate types: 39, 384 Well plates
• Dispensing volume range: 5 - 395 μl
• Dispensing precision: 5 µl: CV≤10% (typical), 20 µl: CV≤1.5% (typical), 100 µl: CV≤1% (typical)
• Dimensions: 31W x 32D x 15.5H cm
• Electrical: 110-120 V
• Weight: 6.2 kg

Fully modular and upgradable design with peristaltic pump and microprocessor-controlled syringe technologies.

• Broad volume handling range—1µL to 3mL
• Microplates with 6 to 1536 wells with a wide array of plate formats, including low profile, standard height, deep well and microtubes
• Compact footprint with base instrument height under 8 in.
• Dispenses at 7° angle for minimized disturbance to loosely-adherent cell monolayers
• Autoclavable dispense paths for guaranteed sterility
• Easy to use keypad interface or increased flexibility with LHC PC Software
• Speed: dispenses 1536 wells in 7 seconds

• Confidence-Plus unconditional lifetime warranty
• BioStack automation compatible
• Available with one or two peristaltic pumps, two syringe pumps or any combination

The Fisher Scientific Dry Bath Incubators offer exceptional temperature control and uniformity in addition to a powder coated steel body to provide durability for demanding applications.

Specifications:

• Temperature Range: 5 - 130 °C
• Temperature Stability: +/-1.5 °C
• Temperature Uniformity: +/-0.5 °C
• Power Requirements: 120V, 50/60Hz

Features:

The 120 Series are small, but full-featured, laboratory pumps with simple intuitive operation and four pumphead options to suit any application.

• Flow rates 0.0001 to 36mL/min at 2 bar (30psi)
• Compact footprint requiring minimal benchtop space: stacks two high
• Four pumphead options, with 1-, 2-, or 3-channel options to cover any application
• Manual operator control or manual/remote pump options
• Superior Speed Control up to 20,0000: ±1% set point accuracy
• IP31 ingress protection for wipedown environments
• Maintenance-free brushless DC motor Choose from 1-, 2- or 3-channel pumps
• Smooth wipe-down enclosure for ultimate cleanability
• Lockable keypad to prevent tampering

Specifications:

• Display Type: Digital
• Maximum Pressure: 30 psi
• Overall Height:2cm
• Overall Length:1 in.
• Motor Type: Brushless DC
• Reversible: Yes

Description:

Peristaltic pumps are the simplest pump, with no valves, seals or glands to clog or corrode. The fluid contacts only the bore of a tube, eliminating the risk of the pump contaminating the fluid, or the fluid contaminating the pump. Peristaltic pumps can run dry. Peristaltic pumping is ideal for most fluids, including viscous, shear-sensitive, corrosive and abrasive fluids, and those containing suspended solids. They are especially useful for pumping operations where hygiene is important. Peristaltic pumps operate on the positive displacement principle. They are particularly suitable for metering, dosing and dispensing applications. Pumps are easy to install, simple to operate and inexpensive to maintain.

Specifications:

• Supply voltage/frequency: 100-120V/200-240V 50/60Hz 1ph
• Maximum voltage fluctuation: ±10% of nominal voltage. A well regulated electrical mains supply is required along with cable connections conforming to the best practice of noise immunity
• Power consumption: 100VA
• Full load current: <0.43A at 230V; <0.86A at 115V
• Operating temperature range: 4°C to 40°C, 40°F to 104°F
• Storage temperature range: -40°C to 70°C, -40°F to 158°F
• Maximum altitude: 2,000m, 6,560ft
• Humidity (non-condensing): 80% up to 31C, 88F, decreasing linearly to 50% at 40C, 104F
• Noise: <70dB(A) at 1m

Pump head ideal for fast tubing changes and reduced maintenance. The design and adjustable tubing retention allow for multiple tubing sizes—change tubing without removing head from drive.

Specifications:

• Dimensions: 114 L x 64 W x 102 H (mm)
• Max Flow Rate: 2300 mL/min
• Min Flow Rate: .001 mL/min
• Tubing sizes: L/S (13, 14, 16, 17, 18, 25)
• Rollers: 3 

Pump head ideal for fast tubing changes and reduced maintenance. The design and adjustable tubing retention allow for multiple tubing sizes—change tubing without removing head from drive.

Specifications:

• Dimensions: 114 L x 64 W x 102 H (mm)
• Max Flow Rate: 2300 mL/min
• Min Flow Rate: .001 mL/min
• Tubing sizes: L/S (13, 14, 16, 17, 18, 25)
• Rollers: 3 

Description:

The Console Drives are highly featured yet easy to operate Masterflex L/S pump drives, These drives are self contained compact unites that include a drive motor and all operating controls. The keypad is laid out on a sloped front panel for ease of control and for quick and easy indication status. A digital display provides a continuous indication of flow rates, actual rpm or percentage of maximum rpm.

Specifications:

• Maximum Speed: 100 rpm
• Minimum Speed: 1.6 rpm
• Operating Temperature: 0°C to 40°C
• Storage Temperature: -10°C to 60°C
• Chemical Resistance: Exposed material is paint, plastic, aluminum, and vinyl
• Line Voltage Limits: 90 to 130 V AC, 50/60 Hz
• Dimensions (L x W x H): 11.5 x 7 x 7 in. (29.2 x 17.8 x 17.8 cm)
• Weight: 15 lbs. (6.8 kg)

Description:

An economical and versatile variable-speed drive with a wide flow range:

• Separate single-turn speed control and on/off switch with green power indicator—maintain speed setting while turning pump on/off.
• The 1/20-hp unidirectional motor (counterclockwise) has soft start and back EMF for ±5% speed control.
• Stackable painted steel housing is IP22 rated for protection from vertically falling water.
• 115 VAC models are UL and cUL listed; 230 VAC models are CE marked in compliance with European Community standards.
• 6-ft (1.8-m) line cord; 115 VAC: U.S. standard plug; 230 VAC: IEC 320/CEE22 socket—pumps are shipped with cord/plug set specific to destination country.

Specifications:

• Min RPM: 7
• Max RPM: 200
• Max. Flow Rate:1130 mL/min
• Min. Flow Rate: 0.42 mL/min
• Dimensions (L x W x H): 9” x 7” x 6” (229 x 178 x 152 mm)

Features

• Control Type: Variable-Speed Analog
• Number Of Channels: 1
• No washdown capable
• Continuous duty cycle

Specifications:

• Speed Range: 35 - 200 rpm
• Flow Rate Per Channel Range: 1.6 - 239 mL/min
• Number of Rollers: 3
• Power Consumption: 90 - 260 VAC, 50/60 Hz
• Dimensions (W x H x L): 5.25 x 4.5 x 8.5 in

Masterflex L/S series peristaltic pumps include fixed and variable speeds, providing high accuracy drives for precise flow control and dispensing. Ideal for laboratory, process and field use.

Specifications:

• Maximum Speed: 1.6 - 100 rpm
• Maximum Torque Output: 360 oz-in (26 kgcm)

Masterflex L/S series peristaltic pumps include fixed and variable speeds, providing high accuracy drives for precise flow control and dispensing. Ideal for laboratory, process and field use.

Specifications:

• Maximum Speed: 1.6 - 100 rpm
• Maximum Torque Output: 360 oz-in (26 kgcm)

This economical and easy to use analog drives offer precise speed control, ideal for metering applications. The reversible motor allows for purge tubing before or after pumping fluid in either direction.

Specifications:

• Speed Range: 6 - 600 rpm
• Speed Control:+/- 2%
• Max Flow Rate: 3400 mL/min
• Minimum Flow Rate:36 mL/min
• Power:90-130VAC, 1.5A
• Dimensions of Drive:5 x 7 x 7 in
• Motor hp:1/10