We offer an assortment of used and refurbished Waterbaths, Circulators and Chillers ranging from Hea...
Compact, fully integrated systems designed specifically for DNA and RNA applications.
Weight: 465 kg (1025 lb)
Height (overall): 120.7 cm (47.5 in.)
Width: 94.0 cm (37 in.)
Depth: 67.3 cm (26.5 in.)
Ventilation clearances: 5.1 cm (2 in.) sides; 15.2 cm (6 in.) rear
Maximum heat dissipation into the room: 1.0 kW (3400 Btu/hr)
Humidity restrictions: <95% (non-condensing)
Noise level measured 0.91 m (3 ft) in front of the Instrument: <57 dBa
Installation (overvoltage) category: II
Pollution degree: 2a
Revolution Counter: Displays accumulated total number of rotor revolutions in tens of thousands
Barrier Ring: 41-mm (1.63-in.) heat-treated steel alloy armor ring surrounded by a 12-mm (0.50-in.) steel vacuum chamber to provide full protection for the operator
Door: 17.5-mm (0.69-in.) high-strength structural steel
Vacuum: Diffusion pump in series with a mechanical pump typically reduces chamber pressure to below 5 microns (0.7 Pa)
Acceleration: Selection from two profiles: maximum acceleration from 0 rpm to set speed, or slow acceleration from 0 to 500 rpm, followed by maximum acceleration to set speed
Deceleration: Selection from three profiles: full dynamic braking to 0 rpm, slow (full brake to 500 rpm followed by reduced braking to a gentle stop), or no brake
Operation: Standard, programmed, or delayed start; instrument memory can store up to nine programs
Key Switch: Used to select normal or zonal operation
LAB Series combines many of the features of larger systems in to a small console. Using the best components and design techniques combined with the most advanced PC/PLC control system, the LAB Series is the perfect solution for both your small lot protocol development and small scale production needs. The system comes complete with Opti-Dry PC/PLC freeze drying control system and offers all the necessary options to meet your most demanding needs. The LAB Series offers 3.75 sq ft of shelf area and 8L of condensing capacity with 63mm of shelf-to-shelf spacing, providing more performance and capacity than any system in its class.
The M7 is an accurate, reliable and precise system which is suitable to both routine analysis and precision research applications. It can work with different manufacturers’ GC systems. The M7 MS can be widely used in food safety, environmental protection, material chemical industry, college education & research, life science, medicinal research, criminal investigation and many other fields. These applications benefit from its high performance, long service life and PERSEE’s strong after-sales service.
â—† User-friendly design makes the maintenance much easier
â—† Compatible with different brand and models GC system
â—† The powerful GC-MS workstation is intuitive, simple and easy to operate.
â—† The unique remote-control function enables powerful technical support
â—† Competitive price and maintenance cost
â—† Lifetime free workstation software update
Features a large, universal icon and English display with on-screen prompts and single-point calibration capability. For laboratory use only. Suitable for tank capacities up to 28 liters.
The Thermo Neslab EX-7 Circulating Water Bath is designed to provide temperature control for applications requiring a fluid work area or pumping to an external system. Unit consists of a circulation pump, seamless stainless steel bath, work area cover, and a microprocessor temperature controller
The heavy metal analyzer PF7 features good accuracy, high sensitivity, simple structure, small volume and easy operation. The automated PF7 is an ideal supplementary of ICP-MS if testing dozens of elements in ULTRA trace elements. A perfect replacement of ICP-MS if only testing heavy metals like Arsenic, Mercury, Cadmium and Lead. Popular instruments in various market and research industries including: Cannabis, Environment (Water and Soil), Agricultural, Public health, Pharmaceutical, Metallurgical, Food and beverage, Clinical, Geological, Petrochemical, and more. Also it comes with XYZ axis auto sampler AS4 as an optional accessory making the analysis even simpler.
â—† Pre-aligned whole system: For the perfect running condition, plug and play
â—† Free-adjustment and data coded high performance lamps: achieve better sensitivity and accuracy
â—† Up to 3 testing channels: For simultaneous analysis, high efficiency
â—† Fully sealed reagent system: Inorganic and organic waste dispose separately, build-in toxic elements trap devices, green laboratory, care for the health
â—† Gas-driven flow system: Without consumable parts, auto purge, chemical resistant FEP tubing, easy to maintenance
â—† High grade automation/intelligent: Auto sampler, Auto dilution, auto optimized
â—† Double beam optical system: To eliminate light source drift
â—† New design Gas Liquid Separator: With magnetic stirring and Peltier system for improved repeatability of analytical results and high sensitivity
â—† Easy to upgrade: Speciation system accessory, compatible with multi brand HPLC pump
The LC-20ADXR offers an extended pressure tolerance over traditional HPLC (up to 66 mPa) while maintaining stable solvent delivery with reliable performance across an extensive analytical flow rate range. This pump also includes automatic rinsing to ensure improved plunger seal life under high-pressure delivery conditions.
The CTO-20AC can heat and cool the column compartment, utilizing a Peltier cooling device to provide sub-ambient conditions. Temperature control is regulated over a wide range, from 10ºC below room temperature to 85ºC, for increased reproducibility and separation performance.
A stand-alone system controller designed for maximum flexibility. Up to twelve LC modules and two channels of analog data can be connected for acquisition.
The Tomtec Quadra 96 Liquid Handling System is a simultaneous 96-well Pipettor: strongSix station shuttle for protocol automation, Fully programmable for preset protocols, Small footprint,minimum benchspace, Various Hood Enclosures available, Programmable tip heights for all stations, Provides reproducible SPE protocols, Industry leader in SPE sample preparation strong Vacuum Control Panel:/strong 3 way valve for closed/open/vent mode, Precise regulator sets working vacuum, Dependable gauge verifies working vacuum, Set parameters at site of experiment, Standardize each extraction step, Easily adapts to house or pump vacuum source, Adapts to Quadra96 or manual operation
The Quadra96 Model 320 is a versatile automated workstation. It is a true 96 well high throughput pipettor equipped with 96 disposable tips – 450µl max volume. The 450µL capacity tips, and six station shuttle are suited to a variety of applications including replicate plating, PCR preparation, SPE (Solid Phase Extraction), liquid/liquid extraction, etc. The Quadra 320 is the industries predominate choice for Solid Phase Extraction applications
Six Station Automated Shuttle Automates complete assay protocols Pipette multiple reagents in one pass Custom reservoirs for standards & controls Air Displacement or Positive Displacement Volumes from 1µL to 450µL Cv of 2 - 3% Disposable Tip Assembly Stand alone, using the front panel Windows programming, using Quadra Command softwareIt comes complete with PC loaded with Quara 96 Command software plus original operator's manual and software manual
It measures approximately 64 cm W x 57 D x 74 H. 230 V.
The Buchi R-205 Rotavapor System is considered to be the most desired high-end rotary evaporator on the market and is known for its versatility and reliability. This Buchi R-205 Rotavapor System includes the Buchi B-490 Heating Bath, "C' glassware attachments Buchi V-500 vacuum pump and V-800 vacuum controller.
The Buchi R-210 Rotavapor System includes the Buchi B-491 Heating Bath, "C” glassware attachments, Buchi V-700 vacuum pump, and V-850 vacuum controller. The Buchi R-210 is compact, easy-to-use, reliable, and safe, while also providing a complete solution for laboratory solvent evaporation through an integrated singular vacuum controller, vacuum pump, and recirculating chiller design.
The NESLAB RTE 211 refrigerated bath chiller circulator offers powerful cooling and heating, expansive temperature ranges, and sophisticated controller technology. These robust, compact units offer precise temperature stability and high reliability for external circulation and in-bath applications. A versatile combination force and suction pump provides the pressure necessary to circulate fluid long distances to both open containers and closed loop systems.