Cambridge Scientific
Used Lab Equipment

Used Lab Equipment

Ph Meter: 1-7 of 7

*Please Select a Category and/or Manufacturer dropdown OR Search By Model Name, # or Keyword.* Advanced Search >
VWR 89202-974 Chiller

VWR 89202-974 Chiller

Cambridge ID #: 18168

Specifications:

  • Operating temperature range: -20° to 200°C (382°F)
  • Temperature stability: ±0.01C (±0.02°F)
  • Reservoir capacity: 7 liters
  • Electrical requirements: 120V, 60Hz, 12A
  • Pump type: variable speed pressure/suction
  • Maximum pressure: 4.3 psi (0.30 bar)
  • Maximum pressure flow rate: 5.3 gpm (20.1 lpm)
  • Maximum suction flow rate: 3.9 gpm (14.7 lpm)
  • Heater wattage: 1100 watts
  • Environment: indoor use only
  • Maximum altitude: 2000 meter
  • Operating ambient: 5° to 35°C (41° to 95°F)
  • Relative humidity: 80%; non-condensing
  • Installation category: II
  • Pollution degree: 2
  • Ingress protection: IP 31
  • Climate class: SN
  • Software class: B
  • Output waveform: sinusoidal
Learn More
VWR-89202-974-Chiller-18168
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
New Brunswick G-2 Orbital Shaker

New Brunswick G-2 Orbital Shaker

Cambridge Scientific ID #'s: 18352, 17340

Features:

This shaker is equipped with a 60 minute timer and an adjustable speed dial with a 0 - 500 RPM meter. It performs using a ½ AMP SB fuse found on the back by the 120V, 50/60 Hz power connection.

Specifications:

 

  • Platform Dimensions: 11 x 13"
  • Speed control: 45-400 RPM analog control
  • Orbital motion: 3/4"
  • Timer: 0-60 minutes and hold
Learn More
New-Brunswick-G-2-Orbital-Shaker-18352
By clicking below we can further assist you with your inquiry. Inquire 2 In Stock Worldwide Shipping
LEJ HXP 120 Microscope LED Fluorescence Light Source

LEJ HXP 120 Microscope LED Fluorescence Light Source

Cambridge ID #: 18861

Description:

This compact device is the ideal external light source for fluorescence excitation in microscopy. Coupling is preferably achieved via liquid light guides. The average service life of a lamp is 2,000 hours. The optimised internal air flow cools the lamp and enables quiet operation. A resettable operating hour meter shows lamp operating hours. The brightness of the lamp output can be varied in 5 steps (0-100%) by means of a mechanical dimmer unit. An ultra-fast shutter opens or closes after activation with approx. 6 ms. The shutter is actuated by means of an appliance switch, but is also possible externally by means of a remote control input or CAN-BUS connection. This compact light source is available as a VIS or UV version in addition to a version that permits the coupling of multi-pin liquid light guides.

Specifications:

  • Dimensions (H x W x D): 210 x 130 x 290 mm
  • Weight: 4.7 kg
  • Ambient Temperature: 0°C to 40°C
  • Storage Temperature: - 20°C to + 85°C
Learn More
LEJ-HXP-120-Microscope-LED-Fluorescence-Light-Source-18861
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Prior Lumen 200 PRO Microscope Fluorescence Light SourceImage Coming Soon

Prior Lumen 200 PRO Microscope Fluorescence Light Source

Cambridge ID #: 19196

The Lumen 200 Fluorescence Illumination System is a powerful, cost effective alternative to standard 100 Watt mercury and halogen lamphouses. The combination of Prior's proprietary 2,000 hour life, 200 watt metal arc lamp and two or three meter liquid light guide provide unrivalled versatility and illumination power. The Lumen 200 utilizes a metal halide lamp rather than the more traditional high pressure mercury or xenon burners. This means 2000 hours of stable output compared to a maximum of 300 hours for a mercury lamp. 

Specifications:

  • Voltage: 100-240V
  • Current: 2A
  • Frequency: 50-60Hz
  • Ambient Operating Temperature: 5 - 30°C
  • Weight: 5 kg
Learn More
Prior-Lumen-200-PRO-Microscope-Fluorescence-Light-Source-19196
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Millipore Milli-Q Gradient A10 Water Purification

Millipore Milli-Q Gradient A10 Water Purification

Cambridge ID #: 13718

Specifications:

Flow rate:

  • 1.3 – 1.7 LPM with Millipak® Express 20
  • 1.3 – 1.7 LPM with BioPak

Resistivity:

  • Minimum 18.0 MΩ.cm @ 25°C
  • Typically 18.2 MΩ.cm @ 25°C

Particles: ≤ 1/ml (particle size > 0.22 μm)

Pyrogens: BioPak installed < 0.001 Eu/ml

TOC: Maximum 5 ppb (this specification came from test conditions where a Milli-Q Gradient was fitted with a Q-Gard® 1 Purification Pack and a Quantum EX Ultrapure Cartridge and the feedwater came from a Millipore RiOs Water System. The feedwater TOC value was < 50 ppb). The TOC of the Milli-Q Product Water can vary as a function of the feedwater TOC.

Micro-Organisms: ≤ 1 CFU/ml

Weight:

Milli-Q Gradient: Operating weight (wetted Q-Gard, Quantum and Millipak): 16 kg.

 

  • Milli-Q Gradient A10: Operating weight: 16.8 kg.

Electrical: 

The electrical requirements for a Milli-Q Gradient (or Milli-Q Gradient A10) are:

  • 120 VAC ± 10%, 50/60 Hz, 100 VA, 0.5 amp source, 2 amp Time Lag fuse used (ref. ZMQS6V0T1, MQP6V0T1, ZMQS6V001, ZMQP6V001).
  • 230 VAC ± 10%, 50/60 Hz. 0.26 amp source, 1 amp Time Lag fuse used (ref. ZMQS5V0T1, ZMQP5V0T1, ZMQS5V001, ZMQP5V001).
  • The source of electrical power should be within 1 meter of the Milli-Q. The source of electrical power must be earth grounded.

Measurement Ranges for TOC, Resistivity, Conductivity and Temperature:

  • Resistivity Measurement Range: 2.4 – 18.2 MΩ.cm (compensated to a 25°C value)
  • Conductivity Measurement Range: 0.055 – 0.294 μS/cm
  • Temperature Measurement Range: 0 – 45°C (not the system temperature operating range)
  • TOC Measurement Range: 1 – 999 ppb
Learn More
Millipore-Milli-Q-Gradient-A10-Water-Purification-13718
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Millipore Milli-Q Synthesis A10 Water Purification

Millipore Milli-Q Synthesis A10 Water Purification

Cambridge ID #: 15882

Specifications:

Flow rate:

  • 1.3 – 1.7 LPM with Millipak® Express 20
  • 1.3 – 1.7 LPM with BioPak

Resistivity:

  • Minimum 18.0 MΩ.cm @ 25°C
  • Typically 18.2 MΩ.cm @ 25°C

Particles: ≤ 1/ml (particle size > 0.22 μm)

Pyrogens: BioPak installed < 0.001 Eu/ml

TOC: Maximum 5 ppb (this specification came from test conditions where a Milli-Q Gradient was fitted with a Q-Gard® 1 Purification Pack and a Quantum EX Ultrapure Cartridge and the feedwater came from a Millipore RiOs Water System. The feedwater TOC value was < 50 ppb). The TOC of the Milli-Q Product Water can vary as a function of the feedwater TOC.

Micro-Organisms: ≤ 1 CFU/ml

Weight:

Milli-Q Gradient: Operating weight (wetted Q-Gard, Quantum and Millipak): 16 kg.

 

  • Milli-Q Gradient A10: Operating weight: 16.8 kg.

Electrical: 

The electrical requirements for a Milli-Q Gradient (or Milli-Q Gradient A10) are:

  • 120 VAC ± 10%, 50/60 Hz, 100 VA, 0.5 amp source, 2 amp Time Lag fuse used (ref. ZMQS6V0T1, MQP6V0T1, ZMQS6V001, ZMQP6V001).
  • 230 VAC ± 10%, 50/60 Hz. 0.26 amp source, 1 amp Time Lag fuse used (ref. ZMQS5V0T1, ZMQP5V0T1, ZMQS5V001, ZMQP5V001).
  • The source of electrical power should be within 1 meter of the Milli-Q. The source of electrical power must be earth grounded.

Measurement Ranges for TOC, Resistivity, Conductivity and Temperature:

  • Resistivity Measurement Range: 2.4 – 18.2 MΩ.cm (compensated to a 25°C value)
  • Conductivity Measurement Range: 0.055 – 0.294 μS/cm
  • Temperature Measurement Range: 0 – 45°C (not the system temperature operating range)
  • TOC Measurement Range: 1 – 999 ppb
Learn More
Millipore-Milli-Q-Synthesis-A10-Water-Purification-15882
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
VWR WB20 General Purpose Water Bath

VWR WB20 General Purpose Water Bath

Cambridge ID #: 18473

Specification:

 

  • Working Temperature: Ambient +5ºC to 100ºC (ambient +10º to 212ºF), 60ºC (140ºF) without cover
  • Temperature Uniformity: ±0.2°C @ 37°C (±0.4°F @ 98.6°F)
  • Temperature Stability: ±0.1°C (±0.2°F)

 

  • Environmental Conditions

 

    • Indoor use only
    • Maximum altitude: 2000 meter
    • Operating ambient: 5° to 40°C (41° to 104°F)
    • Relative humidity: 80%, non-condensing
    • Installation category: 2
    • Pollution degree: 2
Learn More
VWR-WB20-General-Purpose-Water-Bath-18473
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping