Used Lab Equipment

The ChemTec provides programmable feed scheduling for chemical reactors, bioreactors and fermenters either by weight or volume. Both linear and exponential feed strategies can be readily implemented. When interfaced with an electronic balance, the ChemTec can also be used to maintain vessel or reactor weight in diafiltration or perfusion applications, it can also act as a pH controller for pH maintenance or simple end point titration. 

Specifications:

• Pump Output: 0.03 ml/min to 2,250 ml/min
• Tubing Sizes: #13, 14, 16, 17, 18, and 25

Column Heater for Waters Alliance Series

Specifications:

• Temperature Range: 20 to 65 °C in 1 °C increments (5 °C above ambient)

Specifications:

• Max Pressure: 8700 psi
• Dimensions (W x D x H): 6-3/8 x 11-1/4 x 5-1/2 inch

Transferring sample aliquots from dissolution bath vessels to dissolution dispenser, this high throughput, automated, HPLC platform provides fast and accurate results to suit all HPLC needs.

Specifications:

• Capacity: 5 x 24-Position Carousels
• Number of Syringes: 6 to 8 (depending on configuration)
• Accessories: Power On/Off LED on front panel

Specifications:

• Chamber Volume cu. Ft: 2.5
• Max Temperature: 90°C
• Chamber Dimensions (in.) W x D x H: 17 x 17 x 15
• Temperature Range: +10°C to 90°C
• Stability at 37°C: +/-1°C
• Uniformity at 37°C: +/-1.5°C
• Shelf Area: 2.0 sq. ft.
• Dimensions (in.) W x D x H :  19-1/8 x 23 x 21
• Electrical Requirements: 115V, 2.5A, 60Hz, 290W
• Hydraulic Thermostat
• Shelves Included: 2
• Max Number of Shelves: 5

Integrated temperature control feature enables connection of a temperature probe, placed directly in the medium, to control medium temperature with a high degree of precision. The stainless steel composite hot plate, reaching a temperature of 340 °C, enables rapid heating. RS 232 and USB interfaces enable pc control of the magnetic stirrer and documentation of all test parameters. 

Specifications:

• Stirring Capacity: 20 L
• Motor Rating Output: 9W
• Speed Range: 50 – 1700 rpm
• Setting Accuracy Speed: 10 rpm
• Stirring Bar Length Min: 20 mm
• Stirring Bar Length Max: 80 mm
• Self Heating of Hot Plate: 28 +K
• Heat Output: 600W
• Heating Temperature Range: Room Temperature - 340°C
• Temperature Setting Range Min: 0°C
• Temperature Medium Max: 270°C
• Heating Rate Medium: 7 K/min
• Adjustable Safety Circuit Min: 50°C
• Adjustable Safety Circuit Max: 380°C
• Weighing Range: 10 – 5000 g
• Weighing Accuracy: < 500g: +/- 1g, > 500g: +/- 5g
• Load Capacity Weighing Function Max: 5 kg
• 2.7 kg
• Permissibly Ambient Temperature: 5 - 40°C

Description:

The TEC Control Unit controls the temperature and shaking performance (Frequency, amplitude, pattern) for a range of INHECO\'s heating/cooling units and shakers. Examples of devices which are controlled by the TEC: CPAC, HeatPAC, Heated lid, Teleshake 95, Thermoshake, etc.

Specifications:

• Inheco Tec Control 935 with Watlow Display
• Temperature: Up to 135°F (57°C)

Features:

Install any desired configuration of Agilent 1200 Series modules. The control module software will reflect which modules are present in the LC system and adjust the screens accordingly.

• Enter parameter settings for every module, perform reset and on/off functions as well as calibration and configuration settings in a self-explanatory and intuitive way.
• Define automated analyses including methods, timetables, injector programs, method sequences and automated calibration settings using the control module.
• Protect your method from any inadvertent keyboard changes by setting method protection.
• Use PC cards to store and transfer methods and sequences between Agilent1200 systems.
• Monitor all operations and error events using the self-updating logbooks.
• Use the context-sensitive online information system to get further information on all topics.
• Use the context-sensitive menu function to have the quickest access on related functions.
• To help comply with Good Laboratory Practice (GLP) regulations you can select a variety of module tests that will check the performance of the LC system.
• The early maintenance feedback (EMF) limits can be used for scheduling maintenance work.
• Display data graphically using the Plot screen where as many as three different signal scan be monitored at the same time.
• Print information to a PCL3 compatible printer connected to the serial RS232 port of an Agilent 1200 module.

Features:

Install any desired configuration of Agilent 1200 Series modules. The control module software will reflect which modules are present in the LC system and adjust the screens accordingly.

• Enter parameter settings for every module, perform reset and on/off functions as well as calibration and configuration settings in a self-explanatory and intuitive way.
• Define automated analyses including methods, timetables, injector programs, method sequences and automated calibration settings using the control module.
• Protect your method from any inadvertent keyboard changes by setting method protection.
• Use PC cards to store and transfer methods and sequences between Agilent1200 systems.
• Monitor all operations and error events using the self-updating logbooks.
• Use the context-sensitive online information system to get further information on all topics.
• Use the context-sensitive menu function to have the quickest access on related functions.
• To help comply with Good Laboratory Practice (GLP) regulations you can select a variety of module tests that will check the performance of the LC system.
• The early maintenance feedback (EMF) limits can be used for scheduling maintenance work.
• Display data graphically using the Plot screen where as many as three different signal scan be monitored at the same time.
• Print information to a PCL3 compatible printer connected to the serial RS232 port of an Agilent 1200 module.

The Agilent 1200 Series Dual Loop Autosampler is a fixed loop sampler with two different sample loops. As a consequence of this design the metering device, also referred to as syringe, is not a part of the solvent flow path from pump to HPLC column. An additional flush solvent bottle is used to rinse this part of the hydraulic path after each injection. In order to minimize carryover, the sampler is equipped with a needle wash function which dips the needle into a wash vial or the wash port. The wash port is fed by a peristaltic pump and can be operated with most common HPLC solvents.

Specification:

• Weight: 14 kg (29.8 lbs)
• Dimensions (H x W x D): 200 x 345 x 440 mm (8 x 13.5 x 17 in.)
• Line voltage: 100 - 240 VAC, ±10 % (wide-ranging capability)
• Line frequency: 50 or 60 Hz, ±5 %
• Power consumption (apparent power): 200 VA
• Power consumption (active power): 180 W
• Ambient operating temperature:  4 - 55 °C (41 - 131 °F)
• Ambient non-operating temperature: -40 - 70 °C (-4 - 158 °F)
• Humidity: < 95 %, at 25 – 40 °C (77 – 104 °F) non condensing
• Operating altitude: up to 2000 meters (6500 ft)
• Non-operating temperature: top to 4600 meters (14950 ft)
• Safety standards (IEC, CSA, UL): Installation category II, pollution degree 2

Agilent 1200 Series - G4208A

The Instant Pilot provides complete local control and monitoring of a single module or an entire Agilent 1100/1200/1260 and 1290 Series HPLC system. There is no data evaluation in the Instant Pilot. The Instant Pilot allows you to do a variety of HPLC tasks including automated sample preparation and injection, isocratic, gradient and multiple method analyses and basic diagnostics and maintenance.

Specifications:

• Dimensions (W x D x H): 130 × 225 × 35 mm (5.1 × 8.9 × 1.4 inches)
• Weight: 0.8 kg (1.76 lbs)
• Line Voltage: 22 VDC, ± 10 %
• Power Consumption: 7 W
• Ambient operating temperature: 4 - 55 °C (39 - 131 °F)
• Ambient non-operating temperature: -40 – 70 °C (-40 – 158 °F)
• Humidity: < 95%, at 25 – 40 °C (77 – 104 °F)
• Operating Altitude: Up to 3000 m (9842 ft)
• Non-Operating Altitude: Up to 4600 m (15092 ft)

Bigger, Brighter and in Color

The Agilent 1200 Infinity Series Instant Pilot controller gives you complete control, system monitoring, signal plotting and diagnostic capabilities for a virtually unlimited number of LC system modules. Based on the successful implementation of the industry-standard control area network (CAN) and cabling, used in the first Agilent control module, the Agilent 1200 Infinity Series Instant Pilot is even more powerful.

Features:

• Complete local control and monitoring of an Agilent 1200 Series, 1260 Infinity
• and 1290 Infinity system or a single module from a single point. However, not for
• Agilent 1220 Compact LC.
• Mixed system configurations supported, e.g. 1200 Series, 1200 Series SL- and
• 1100 Series.
• Excellent readability and usability by large colored display with background light,
• high resolution and contrast.
• Convenient, ergonomic operation either handheld or at the stack with newly
• developed, secure attachment.
• Handheld or attached to a module in a stack to facilitate operator preferences.
• Easy automation – recalibration intervals and multi-method sequences satisfy
• the most stringent automation routines.
• Transfer and archiving of methods, sequences and logbooks via standard USB
• memory sticks.
• Factory installed software – flat dialog structure, user configurable interface,
• enhanced sequence engine, for example with wait for baseline stabilization,
• diagnosis with passed/failed.
• GLP – System logbook and module log-books record errors, unusual events and
• maintenance activities for GLP traceability

ÄKTAxpress Module

ÄKTA xpress is a chromatography system designed for automated, multistep protein purification of both single and multiple samples.

• Unattended purification: Built-in purification knowledge combines software, hardware, and prepacked columns to eliminate time-consuming manual tasks.
• Highest possible purity: Optimized protocols with up to four steps will deliver tagged proteins of near 100% purity. Built-in cleaning procedures between MAb samples to minimize carry over
• High productivity: Each module can purify up to four proteins. The modular design offers adaptability to meet increased throughput needs.
• Yield : The system is capable of purifying target proteins in yields varying from 1 to 50+ mg.
• Akta Express has a Small footprint: A compact design allows the system to occupy minimal space on the bench or in the cold room.

ÄKTAxpress Module

• Complete Packsize: 1 Piece
• Application: Unattended multistep purification of tagged proteins and antibodies
• Flow Rate: 0.1-65 ml/min
• Operating Pressure Max.: 3 MPa (435 psi)
• Tubing i.d. [Flow Path]: 1 mm
• Single Wavelength Detection: Mercury lamp and 254 and 280 nm filters included. Optional filters for 313, 365, 405, 436 and 546 nm.
• Multiple Wavelength Detection: No
• Flow Cell Path Length: 2 mm
• Multiple Sample Injection: Yes, up to 4 samples
• Autosampler Injection: No
• Automatic Buffer Preparation: No
• Buffer Selection: 10 buffer inlets
• Multi-Step Purification: Yes, up to 4 steps
• Relative Humidity: 20%-95% (non condensing)
• pH Stability Long Term: 2-12
• pH Stability Short Term: 1-14
• Viscosity: max 5 cP
• Width: 250 mm
• Height: 660 nm
• Depth: 600 mm
• Weight: 30 kg
• Voltage: 100-120/220-240 VAC
• Power Consumption: 120 VA
• Protection Class: IP 20
• Pump Type: Piston pump, metering type

Column Heater for Waters Alliance Series

Specifications:

• Temperature Range: 20 to 65 °C in 1 °C increments (5 °C above ambient)