Used Lab Equipment

For shaking in ambient conditions: on the bench, in an incubator or in a warm or cold room, the Innova Platform Shakers are the instrument of choice. Dependable operation is due in large part to the New Brunswick triple-eccentric counterbalanced drive. The Innova platform shaker model 2350 comes with additional stabilizing feet and/or counterweight to balance larger loads on an oversized platform. With a 36" × 24" platform that accepts up to 8 × 6 L Erlenmeyer flasks and offered in a 1" and 2" orbit, the Innova 2350 provides flexibility and dependability for your lab.

The New Brunswick INNOVA 4000 Series are benchtop gyratory incubator shakers. Offering rigid control of temperature and agitation, the large-capacity INNOVA 4000 shaker is capable of culturing a wide array of organisms in test tubes and flasks up to 2.8 L.

The INNOVA series offers a wide temperature range. The INNOVA Model 4000 provides uniform temperature control in a range up to 60°C, while the high-temperature INNOVA 4080 incubator shaker increases the range to 80°C for added hybridization, adding capabilities for various molecular biology techniques, including hybridization studies, plasmid preps, DNA fingerprinting and more. The optional factory-installed cooling coil is also available for operating at sub-ambient conditions.

The INNOVA 4000 was designed with safety and ease of use in mind. The system includes an automatic cut-out feature of the shaker when the lid is opened to protect the operator. A fail-safe thermostat also turns off heat if temperature high limit is exceeded to protect cultures, and the hydraulic arm eases lid opening and closing.

Equipped with a large capacity blower and tightly constructed chamber, the INNOVA 4000 series incubator shaker has a self-correcting microprocessor feedback control which instantly compensates for changes in temperature. Another superior feature of the INNOVA 4000 include the interchangeable, large-capacity accessory platforms, 18" x 18" (46 x 46 cm) that accept gel trays, culture tubes and flasks to 2.8 L.

Specifications:

• Platform Size: 18 x 18
• Maximum Capacity (250 ml Flasks on Universal Platform): 18
• Capacity & Largest Flask Size on Universal Platform: 5 x 2L
• Orbit Diameter (in) 75
• Temperature Range (C°): Ambient +5 to 60 (4080 is Ambient +5 to 80)
• Digital Display: Yes
• Agitation: 25 to 500 rpm
• Type/Application: Benchtop
• Gassing Manifold: Optional
• Overall dimensions: W x D x H (in) 21 x 27.5 x 19.75
• Weight (lbs): 115

The New Brunswick INNOVA 4000 Series are benchtop gyratory incubator shakers. Offering rigid control of temperature and agitation, the large-capacity INNOVA 4000 shaker is capable of culturing a wide array of organisms in test tubes and flasks up to 2.8 L.

The INNOVA series offers a wide temperature range. The INNOVA Model 4000 provides uniform temperature control in a range up to 60°C, while the high-temperature INNOVA 4080 incubator shaker increases the range to 80°C for added hybridization, adding capabilities for various molecular biology techniques, including hybridization studies, plasmid preps, DNA fingerprinting and more. The optional factory-installed cooling coil is also available for operating at sub-ambient conditions.

The INNOVA 4000 was designed with safety and ease of use in mind. The system includes an automatic cut-out feature of the shaker when the lid is opened to protect the operator. A fail-safe thermostat also turns off heat if temperature high limit is exceeded to protect cultures, and the hydraulic arm eases lid opening and closing.

Equipped with a large capacity blower and tightly constructed chamber, the INNOVA 4000 series incubator shaker has a self-correcting microprocessor feedback control which instantly compensates for changes in temperature. Another superior feature of the INNOVA 4000 include the interchangeable, large-capacity accessory platforms, 18" x 18" (46 x 46 cm) that accept gel trays, culture tubes and flasks to 2.8 L.

Specifications:

• Platform Size: 18 x 18
• Maximum Capacity (250 ml Flasks on Universal Platform): 18
• Capacity & Largest Flask Size on Universal Platform: 5 x 2L
• Orbit Diameter (in) 75
• Temperature Range (C°): Ambient +5 to 60 (4080 is Ambient +5 to 80)
• Digital Display: Yes
• Agitation: 25 to 500 rpm
• Type/Application: Benchtop
• Gassing Manifold: Optional
• Overall dimensions: W x D x H (in) 21 x 27.5 x 19.75
• Weight (lbs): 115

The New Brunswick INNOVA 4000 Series are benchtop gyratory incubator shakers. Offering rigid control of temperature and agitation, the large-capacity INNOVA 4000 shaker is capable of culturing a wide array of organisms in test tubes and flasks up to 2.8 L.

The INNOVA series offers a wide temperature range. The INNOVA Model 4000 provides uniform temperature control in a range up to 60°C, while the high-temperature INNOVA 4080 incubator shaker increases the range to 80°C for added hybridization, adding capabilities for various molecular biology techniques, including hybridization studies, plasmid preps, DNA fingerprinting and more. The optional factory-installed cooling coil is also available for operating at sub-ambient conditions.

The INNOVA 4000 was designed with safety and ease of use in mind. The system includes an automatic cut-out feature of the shaker when the lid is opened to protect the operator. A fail-safe thermostat also turns off heat if temperature high limit is exceeded to protect cultures, and the hydraulic arm eases lid opening and closing.

Equipped with a large capacity blower and tightly constructed chamber, the INNOVA 4000 series incubator shaker has a self-correcting microprocessor feedback control which instantly compensates for changes in temperature. Another superior feature of the INNOVA 4000 include the interchangeable, large-capacity accessory platforms, 18" x 18" (46 x 46 cm) that accept gel trays, culture tubes and flasks to 2.8 L.

Specifications:

• Platform Size: 18 x 18
• Maximum Capacity (250 ml Flasks on Universal Platform): 18
• Capacity & Largest Flask Size on Universal Platform: 5 x 2L
• Orbit Diameter (in)75
• Temperature Range (C°): Ambient +5 to 60 (4080 is Ambient +5 to 80)
• Digital Display: Yes
• Agitation: 25 to 500 rpm
• Type/Application: Benchtop
• Gassing Manifold: Optional
• Overall dimensions: W x D x H (in) 21 x 27.5 x 19.75
• Weight (lbs): 115

Specification:

INCUBATOR

• Temperature range: Ambient to 40 degrees C
• Reolution: 0.1 degree C
• Uniformity with cover: better than +/- 0.4 degrees C
• Mechanism: warmed aluminum bed
• Warm up time: 15 minutes typical, display temperature to check
• Temperature detector: thermistor, feedback, heuristic software.

MIXER

• Speeds: Gradual steps, from gentle agitation to vigorous mixing, eight speeds
• Options: continuous or pulse (three second interval)
• Mechanism: orbital mixing achieved by rotating counterweight

TIMER

• Modes: Set time, view time remaining, audible signal
• Resolution: One second
• Range: One second to 99 minutes and 59 seconds

ELECTRIC

• Display: Red, 7-segment, four digit LED
• Keyboard: 16-key, enunciating membrane switch, 4x4
• Power requirements: 12VAC, 2 amp, adaptor provided
• Microprocessor: Z80A

OTHER

• Vessel: Holds two standard microliter plates
• Enclosure: ABS plastic casing. Metal base
• Aerosol goard: Smoke-tint plexi-glass cover
• Dimensions: Approximately 10 x 10 x 4 in. (26 x 26 x 10 cm) with cover

The Corning LSE low speed orbital shaker includes a 30 x 30 cm platform and is ideal for staining and destaining gels, washing blots and general mixing applications. Speed can be set from 3 to 60 rpm and the timer can be set for up to 2 hours or for continuous operation. This product is ideal for staining and washing of fragile gels. The gentle motion prevents foaming of liquids, and it is safe for cold room and incubator use.

Specification:

• Dimensions (L x W x D): 10 x 12.6 x 6.3 in. (25.5 x 32 x 16 cm)
• Weight: 11 lbs. (5 kg)
• Speed: 3-60 rpm
• Voltage: 120V, 50/60Hz

The Model 400 Lumascope iVue is a true color inverted brightfield microscopy with all of the LumaView software features of the fluorescent Lumascope. It takes the advantage of a color CMOS camera. The iVue provides powerful, low-cost, time-lapse microscopy in your incubator.

Specifications:

• Objectives Compatibility: 2.5x, 4x, 10x, 20x, 40x, 60x, or 100x(oil); interchangeable
• Light Source: Ambient light or White LED
• Camera: High Sensitivity CMOS Sensor
• Image Formats: JPG, BMP, TIF, GIF, PNG; 1280 x 800 pixel image
• Video Rates: Up to 8 frames per second
• XY Stage: Holds SBS microplates and Labware Inserts; removable
• Labware Inserts: Holds microscope slides, 3 sizes of petri dishes or Terasaki plates
• Computer Requirements: Windows OS
• Power Requirements: USB or 100-240 VAC, 50-60 Hz
• Dimensions: 9.1” W x 5.1” D x 5.3” H

Dimensions:

44.2W x 34.3D x 16.3H cm (17³/₈ x 13¹/₂ x 6³/₈")

Platform Dimensions: 11x13

Orbital shakers are ideal for solubility studies, extraction procedures, cell cultures, diagnostic tests, general mixing, hybridization, genetics research, bacterial suspensions, staining, destaining, and washing procedures. Units operate in temperature ranges of 0 to 40°C (32 to 104°F) and noncondensing humidity conditions of 20–80%, enabling them to be used in general-purpose incubators, warm rooms, environmental chambers, and refrigerators. Triple eccentric drive enables continuous 24-hour operation, handles heavier loads, and provides smooth, uniform agitation of full or unbalanced loads even at high speeds. Shakers feature a powder-coated, cold-rolled steel exterior. A strong, ABS housing surrounds and protects the polyester control panel.

Digital Models

• Variable speed control from 15 to 500rpm
• Continuous and timed operation from 0.1 hr. up to 999 hr. or 0.1 min. to 999 min.
• Minimize errors: speed and operating time display simultaneously on two individual LED displays
• Shaker shutdown and audible/visual alarms signal if unit operates ±10% of set speed, preventing shaker from walking
• User-adjustable speed calibration can be performed using a digital handheld tachometer, where verification is required and protocols can be standardized
• Unbalanced load sensor stops platform motion when excess vibration is detected and visual/audible alarms signal until condition is corrected
• Soft-start feature eliminates sudden starts and stops, splashing of vessel contents or wetting of flask closure
• Retains parameters during power failure and restarts unit automatically after power is restored
• RS232 interface allows remote monitoring of speed and time

CO₂-Resistant Digital Operating System

• Electrical and mechanical components treated to protect them from up to 10% CO₂ and 95% noncondensing humidity
• Prevents humidity and CO₂ from reacting with electrical components and forming carbolic acid

With a square footprint of under 5 inches, the MiniMag is the most compact stirrer in the Benchmark line. Despite its modest dimensions, the 3.4 inch square work surface accepts a wide variety of beakers, flasks, bottles and other laboratory vessels for stirring volumes as large as 1.5 liters. The stirring speed is continuously adjustable from 100 to 1,500rpm. For temperature sensitive samples, the MiniMag is incubator and cold-room safe for use from +4°C to +45°C.

Specification:

• Speed Range: 100 to 1,500 rpm
• Platform Dimensions: 3.4 x 3.4 in. / 8.5 x 8.5 cm
• Operating Temp. Range: +4 to +45°C
• Max. Stir Bar: 30 mm
• Dimensions (W x D x H): 4.7 x 4.7 x 1.2 in. / 12 x 12 x 3 cm
• Weight: 0.45 lbs (0.2 kg)
• Electrical: 100 to 240VAC, 50-60Hz 2W (5V DC power supply)

Multiskan Spectrum makes getting results easier, replacing separate spectrophotometers and microplate reading instruments by providing both functions in one convenient, compact instrument.  The Multiskan Spectrum is truly two instruments in one, combining both cuvette reading capabilities and advanced microplate reading in one convenient, compact instrument.  You can easily take quick absorbance measurements in a cuvette between the cycles of a microplate enzyme kinetics experiment. 

For maximum flexibility, Multiskan Spectrum accepts all microplate for mats from 6- to 384-wells, as well as cuvettes from standard to ultra micro capacities in glass, plastic, or quartz. You can take multiple photometric readings per well on large format plates, or single measure ments requiring just 30 μl in 384-well plates.

Scanning range of 200 – 1000 nm.  The built-in monochromator makes it simple to select any wavelength from 200 nm to 1000 nm in 1 nm steps without ever changing a filter. Sample absorbances can be scanned over the whole spectrum either in microplates or cuvettes.

Typical applications of the Multiskan Spectrum

• UV/Visible spectrophotometry
• Spectrum scan
• Nucleic acid analysis
• RNA concentration (A260)
• ssDNA concentration (A260)
• dsDNA concentration (A260)
• DNA purity (A260/A280)
• Enzyme kinetics
• E.g.,Vmax and Km
• Protein analysis
• Biuret protein determination
• Bradford protein determination
• BCA protein determination

Technical Specifications

Performance

• Wavelength range 200 – 1000 nm
• Read-out range 0 – 4 Abs
• Linearity 0 – 3 Abs, ±/- 2% at 450 nm
• Accuracy ± 1% or ± 0.005 Abs (0 – 2 Abs)
• ± 2.0% (2 – 3 Abs)
• Precision CV < 1% (0 – 2 Abs)
• CV < 2% (2 – 3 Abs)
• Optical bandpass 2 nm
• Wavelength accuracy ± 1 nm
• Stray light < 0.02% at 230 nm

General Specifications

• Microplate types 6-, 12-, 24-, 48-, 96- and 384-well plates
• Wavelength selection Tunable monochromator, 200 – 1000 nm in increments of 1 nm
• Light source 10 W Xenon flash lamp
• Detectors Photodiodes
• Incubator temperature range Ambient (+25°C) +4°C to 45°C
• Mains input 100 – 240 V (50/60 Hz) autoranging
• Power consumption 200 VA
• Dimensions 397 mm (W) x 217 mm (H) x 450 mm (D)
• [15.6” (W) x 8.5” (H) x 17.7” (D)]
• Weight 12.5 kg (27.5 lbs.)

The SCI-RD-E provides a gentle but effective mixing of biological samples in 1.5ml to 50ml micro tubes, used in a variety of applications including immune precipitations, prevention of blood coagulation, latex diagnostics etc.

Features:

• Compact bench saving design
• Circular rotating action, gives gentle but effective mixing
• Adjustable speed range of 0 to 80rpm
• Comes with disk and 12ea 1.5/15/50ml centrifuge tube clamps
• Cold room and incubator compatible

Specifications:

• Speed range: 0 - 80rpm
• Tilt Angle: 90°
• Disk tube capacity: 1.5ml x 48 / 15ml x 16 / 50ml x 8
• Operating temp. range: 5 - 40°C
• Overall dimensions: 9"L x 12"W x 12"H
• Weight: 6Lbs
• Electrical supply: 100-220V, 50/60Hz

The Orbi-Shaker BT4000 is designed to fit and maximize capacity in most CO2 incubators. Adjust settings without disrupting the CO2 environment by remotely controlling the machine.

Specifications:

• Speed: Variable, 30 to 300 rpm
• Orbit: 19mm
• Max Capacity: 5 x 1 L
• Speed Increment: 1 rpm
• Platform Dimensions: 13 x 12"
• Cord Length: 605"
• Operating Temp: 0° to +65°C
• Dimensions: 11 x 13 x 3"
• Weight: 25 lbs
• Electrical: 120V or 230V

The new Orbi-Shaker CO2 series is designed for shaking, mixing aeration applications in extreme environments, including CO2 incubators. It can withstand temperatures from 0 to 60°C and humidity levels up to 100%. To avoid contamination, unintentional release of gas or deviations from protocol, all settings are adjusted via the included remote control module. This module can be stored outside of the chamber and connects to the shaker via a flat (1mm thickness) cable, that easily passes through a port or underneath an incubator door without compromising the seal. This allows for user adjustment of run time or mixing speed without opening the chamber door(s).

Specification:

• Speed: Variable, 30 to 300 rpm
• Orbit: 19mm
• Max. Capacity: 5 x 1L (14 lbs / 6 kg)
• Speed Increment: 1 rpm
• Platform Dimensions: 13 x 12 in./ 33 x 30 cm (Included)
• Cord Length: 60.5 in. / 154 cm
• Operating Temp. Range: 0° to +65°C
• Dimensions (W x D x H): 11 x 13 x 3 in. / 28 x 33x 7.5 cm
• Weight: 25 lbs (11.25kg)
• Electrical: 120V or 230V, 50-60Hz 600W

Description: The Phoenix Ultra High-purity Lab Water System from Aries FilterWorks delivers Type I, 18.2 Megohm water quality on demand. The water is purified using a staged purification process which includes high-purity ion exchange resins to remove dissolved minerals and internal recirculation to maintain purity. As the water exits the system, a final filter removes particulates and bacteria to reach Type I water specifications. Additional technologies are offered depending on the application, including UV and Ultrafiltration. Multiple sensors continuously monitor the system and final water quality to ensure trouble free operation.

Specifications:

• Dimensions (H x W x D): 21.5 in. x 18.25 in. x 18.25 in.

• Weight: 42 lbs. dry / 47 lbs. operating

• Inlet Connection: 3/8" O.D. Tubing (9.53 mm O.D. Tubing)

• Max Inlet Pressure Range: 20 to 90 psi

• Max. Output Flow: 2.5Lpm

• Inlet Water Temperature Range: 40 - 100 Degrees F

• Power Requirements: 120 VAC/ 60 Hz @ 1.0 amp

• Pressure: 90 PSIG Maximum/ 20 PSIG Minimum

• Temperature (Max.): 100ËšF (30°C)

• Flow Rate (Typical): 0.67 Gallons Per Minute (2.5 Liters Per Minute), < 2.0 LPM with Ultrafilter and Endotoxin filter installed

• Dimensions (H x W x D): 21.6 in. x 14.7 in. x 14.4 in. (54.8cm x 37cm x 36.5cm)

• Weight: 42 lbs. dry / 47 lbs. operating (22.7 kg dry / 25 kg operating)

The R5010 rotating mixer features adjustable speed and tilt angle, reversing mode for better mixing, and three rotisseries for all common tube sizes. This mixer is cold room and incubator safe.

Specifications:

• Speed: 1 to 40 rpm
• Tilt Angle: 0 to 90°
• Capacity: 12 x 50mL, 20 x 15mL,
• Timer: 1 sec to 9 hours or continuous
• Dimensions: 8.25 x 10.5 x 12.5 in
• Temp Range: +4°C to +60°C
• Weight: 7 lbs