Used Lab Equipment

Description:

The Boekel Scientific Round Tissue Flotation Bath has a black ceramic coated basin and a wide rim for drying microscope slides. The unit has analog control with a heating light indicator and an on/off switch.

Specifications:

• Temperature Range: 35°C to 65°C
• Capacity: 1 L
• Weight: 3.2 kg (7 lbs.)
• Dimensions (D x H): 11” x 3.75” (27.9 cm x 9.2 cm)
• Electrical: 115 VAC 50/60Hz 190W

Description:

The flotation bath holds water at a constant temperature to flatten wax or resin sections prior to lifting them onto a microscope slide, and can be used for hot staining except with corrosive substances. The top rim of the unit has generous space for drying slides. The controls have been recessed to provide an added measure of safety. There is a drop-on stainless steel lid to provide a cover to the bowl when not in use. It has a deep tapered bowl made from stainless steel to offer maximum resistance against corrosion. Both the bowl and the upper casing have a matte-black PTFE coating providing visual contrast against wax sections. The lower steel casing has a resistant epoxy coating. The power cable has moduled connections at both terminals. The power inlet socket at the back of the unit has fuses on both the negative and positive lines for optimum protection.

Specifications:

• Temperature range, ℃: 30 to 65 ± 1.5 at 20 ambient

• Dimensions, external (WxDxH), mm: 275 x 325 x 107

• Dimensions, mm: 222 x 85 (Bowl diameter x depth)

• Mass, kg: 3.75

Electrical supply: 220 to 240V 50/60Hz

Specifications:

• Dimensions (L x W x H): 680 x 750 x 1500 mm (26.77 x 29.53 x 59.05 inch)
• Weight (Instrument Only): 210 kg (463 lbs)
• Paraffin melting station: 1
• Number of paraffin baths: 3
• Paraffin capacity:0 L per paraffin bath
• Paraffin temperature: 50 °C to 65 °C
• Cassette capacity: 300 cassettes
• Reagent volume: 4.6 L
• Temperature (processing reagents): Ambient of 35°C to 60°C
• Temperature (cleaning reagents): 50°C to 67°C
• Fill time: 90 seconds
• Drain time: 80 seconds
• Impregnation vacuum: -35 kPa
• Infiltration pressure: +35 kPa
• Fill vacuum: -35 kPa to -60 kPa
• Drain pressure: +25 to +60 kPa
• System bottles: 9
• RTU-bottles: 6
• Condensate bottle: 1
• Containers for cleaning solutions: 3
• Bottle volume:8 and 5.0 L
• Password status: supervisor/operator/service
• Type of password: alphanumeric, freely selectable
• Reagent management system (RMS): switch between RMS and concentration measurement
• Nominal voltage: 120V ± 10% or 230V ± 10%
• Nominal frequency: 50 to 60 Hz

Specifications:

• Specimen Agitation Type: Rotary
• No. of Processing Chambers: 1
• Reagent Capacity: 5L
• Width (English): 28 in.
• Width (Metric): 710mm
• Depth (English): 23 in.
• Depth (Metric): 580mm
• Height (English): 54 in. (top of monitor)
• Height (Metric): 1370mm (top of monitor)
• Weight (English): 363 lbs. (empty)551 lbs. (full)
• Weight (Metric): 165 kg (empty)250 kg (full)
• Voltage: 100-240V
• Hertz: 50/60Hz

Specification:

• Capacity 222 Cassettes (Organized Basket) 300 Cassettes (Random Basket)
• Depth 52cm (20.5 in.)
• Width 67cm (26.5 in.)
• Height 160cm (63 in.)
• Weight 112kg (246.5 lb.)

Features:

• Daily Operations Mode, an easy-to-use operating mode for routine operation
• Systematic logging and reporting of quality control data, event records, and program information
• Automatic in-process reagent rotation—no manual handling of reagents
• Three distinct fill levels in chamber to shorten processing times
• Ten customized programs and five flush options
• Seven password-protected areas
• Easy-to-read screens with colorful graphics; multilingual

Performance:

• Unique reagent monitoring and management system delivers significant reagent cost savings
• Reagent quality of first alcohol is measured using specific gravity and alerts operator when replenishment is needed
• Reagent preheating option allows for more consistent and rapid processing
• Circular design allows greater temperature uniformity
• Continuous agitation circulates reagents freely around specimens
• Baskets are designed for maximum reagent infiltration around specimens by preventing cassette bunching
• Glass lid allows viewing during processing
• Baskets are microwavable and can be used in conjunction with microwave post-fixation

Safety:

• Built-in downdraft ventilation minimizes operator exposure to hazardous vapors when the reaction chamber lid is open
• Reagent storage cabinet is built to enhance safety and is vented through two additional filters for further fume control
• Battery backup provides for specimen protection by safely completing transfer of reagents during power interruptions
• Two independent remote alarms alert user when away from unit or after hours
• Automatic underfill recovery finishes processing in safest environment possible

Description:

The Thermo Scientific Hypercenter XP, also called the Shandon Hypercenter XP is a computer-controlled, fluid transfer tissue processor with automated fixation, dehydration, cleaning and paraffin infiltration features for tissue specimens. The Shandon Hypercenter XP features a Reagent Storage Module that does not allow reagent fumes to vent into laboratory atmosphere while it is in operation. This Shandon tissue processor also carries a flexible air bag which maximizes the system's air capacity, and an emergency carbon filter is utilized as an additional safety feature and only works if there is excess pressure. The Hypercenter XP tissue processor is design with an organized capacity of 180 cassettes, and can be configured as either a floor model or bench-top model. The Hypercenter XP enhances workflow with its One Command Module that can control up to five reaction and storage modules for processing capacity of up to 900 cassettes per load. Additionally, the multi-lingual processor software XP allows the operator to save as much as 9 customized programs and accommodate year 2000 changes. The Hypercenter XP Portable Wax Station also offers the option of a third wax bath which can be used as a final cleaning stage in the wax impregnation of specimens. The Wax Station can be conveniently located to the side of the Hypercenter XP Reaction Module, so that wax-impregnated specimens can be transported safely to an embedding station without messy wax spillages.

Specifications:

• Dimensions:
  • Command Module: 12" x 18" x 10" (30.48 x 45.72 x 25.40 cm)
  • Reaction Module: 18" x 13" x 24" (45.7 x 33.0 x 60.9 cm)
  • Height of Storage Module/Wheels Attached: 27.5" (69.9 cm)
  • Total Height: 46" (116.8 cm)

• Weight
  • Command Module: 20 lbs. (9.1 kg)
  • Reaction Module: 103 lbs. (46.7 kg)
  • Shipping Weight: 400 lbs (181.4 kg)
  • Agency Approvals: Designed to meet IEC 1010, CSA, and UL

• Power Requirements
  • Command Module: 120 V, 60 Hz, 150 VA
  • Reaction Module: 1200 VA

Description:

The instrument provides samples of uniform and reproducible thickness, minimizes damage to surfaces of slices and thereby eliminates the main sources of error in tissue slice work. Slices from approximately 100 to 500 microns in thickness can be prepared at a maximum rate of one slice every 3 to 4 seconds. The slicer operates submerged in a buffer selected by the operator as most appropriate in terms of composition, tonicity, pH, temperature, oxygenation and lubricating properties to maintain the viability of the tissues being sectioned. The microtome and the reservoir with the glass trap are sterilizable to allow the preparation of aseptic slices suitable for prolonged organ culture. The actual slicing is done by a rapidly reciprocating disposable blade oscillating at 1000 to 2500 rpm driven by a motor that also powers the impeller.  The tissue slicer contains a cooling block which allows the temperature of the buffer solution in the slicer’s reservoir to be maintained.

Description:

The New Brunswick TC-7 Tissue Culture Roller Drum is a precision instrument for growing tissue cultures by the roller tube method.  Powered by a heavy-duty, totally enclosed ball-bearing motor, the unit is rated for many years of continuous service. It is quiet in operation and ruggedly built to withstand extensive service under incubation temperatures.  The powerful drive imparts uniform rotary motion to all tubes, maintaining constant speed with heavy workloads. The instrument has a cast-aluminum base that rests on rubber feet in the rear to absorb vibration.

Specifications:

• Dimensions (W x D x H): 15” x 13.5 x 18”
• Weight: 26 lbs.

Includes:

• Binocular or Trinocular available as an option
• (2) CFWE 10xA/18 Eyepieces
• Objectives
  • 10x E10 Ph1 DL
  • 20x .4 Ph2 DL
  • 40x .55LWD Ph3 DL

Designed to provide consistent temperature for reliable results with easy-to-use operation.

Specifications:

• Temperature range: Ambient to 100℃
• Temperature stability: ± 5 ℃
• Capacity: 10 L
• Resolution: ± 0.1℃

Description:

Boekel Scientific offers a wide variety of Dry Bath Incubators designed to accommodate an assortment of interchangeable Heating Block Modules. These reliable and economical products are ideal for a variety of applications including restriction digests, C.O.D. denaturing DNA, BUN, melting agar, coagulation studies, in situ hybridization and Hot Start PCR.

Specification:

• Temperature Range: +5ºC to 120ºC
• Stability: ±0.2°C @ 37°C

The Fisher Scientific Dry Bath Incubators offer exceptional temperature control and uniformity in addition to a powder coated steel body to provide durability for demanding applications.

Specifications:

• Temperature Range: 5 - 130 °C
• Temperature Stability: +/-1.5 °C
• Temperature Uniformity: +/-0.5 °C
• Power Requirements: 120V, 50/60Hz

Specifications:

• Temperature Range: Ambient to 100°C
• Temperature Accuracy: ±0.24° at 37°C
• Temperature Stability: ±0.5° at 37°C
• Resolution: ±0.1°C
• Capacity: 2L
• Overall Dimensions (L x W x H): 25 x 27 x 19 cm

The Fisher Scientific Isotemp Waterbath Model 10L-M has a bath volume of 10 L. It has an easy access user panel with a LCD temperature display. It can display °C or °F. And it also has a safety set dial.

Specifications:

• Bath Volume Capacity: 10 L
• Temperature Range: Ambient to5°C to 200°C

Provide controlled dry heat for a wide variety of clinical and general chemistry applications.

Specifications:

• Temperature Range: 5°C - 130°C
• Power Requirements: 120V, 50/60Hz