Used Lab Equipment

Description:

Thermo Scientific Savant DNA SpeedVac concentrators are designed specifically for DNA and RNA applications. These compact, fully-integrated systems support the rapid and efficient concentration and drying of DNA/RNA samples, nucleic acids, PCR preps and synthetic oligos. You can depend on our DNA concentrators to provide sample safety and reproducibility for your key protocols:

• Drying down DNA/RNA precipitates in microplates or microtubes
• Drying down PCR samples in water/ ethanol or isopropanol
• Drying down oligonucleotides

Specifications:

• Dimensions: 29 x 63 x 33 cm (11.5 x 25 x 13”)
• Weight: 36 kg (80 lbs.)
• Chamber Temperature: Ambient, 43°C, or 65°C with over-temperature safety shut-off
• Timer Range (Heat and Run): 5 minutes to 9 hours and 55 minutes, hold
• Concentrator Volume: 0.5 – 2.0 mL
• Concentrator Capacity: 36 – 72 tubes, 2 shallow-well microplates

Description:

Boekel Scientific offers a wide variety of Dry Bath Incubators designed to accommodate an assortment of interchangeable Heating Block Modules. These reliable and economical products are ideal for a variety of applications including restriction digests, C.O.D. denaturing DNA, BUN, melting agar, coagulation studies, in situ hybridization and Hot Start PCR.

Specification:

• Temperature Range: +5ºC to 120ºC
• Stability: ±0.2°C @ 37°C

Description: The Thermo Scientific EASYpure II RF is a batch-fed water purification system designed to provide Type I reagent-grade water with extremely low organic carbon content. It uses a three-stage deionization process combined with a 0.2 micron final filter to polish pretreated water (distilled, deionized, or reverse osmosis) to produce water with a resistivity of up to 18.2 megohms-cm and with a total organic carbon content of less than 10 ppb. Water resistivity is continuously sensed by a resistivity cell and displayed on a digital display. The EASYpure II RF is designed to be a bench mounted unit. If wall mounting is required, contact Technical Services for information on a wall bracket and mounting accessory.

Specifications:

• Dimension Requirements: 12" W X 19" D X 18 1/8" H (30.5 cm X 48.3 cm X 46.0 cm)

• Clearance Requirements: Sides - 4" (10.1 cm) minimum to allow air flow, Above - 12" (30.5 cm) minimum for reservoir replenishment

• Storage Reservoir Capacity: Approximately 6.5 liters usable, 7.0 liters total

• Electrical Requirements:  100-240 VAC +5% -10%, 47-63 Hz.

• Resistivity: 18.2MW·cm at 25°C

• Conductivity: 0.055 µS/cm

• Feedwater Source: Pretreated

• Flow Rate: Up to 1L/min.

• Bacterial Content: <1CFU/mL

• Particles >0.2µM/mL: <1 μM/mL

• TOC Monitor with UV Intensity Monitoring: No

• Feed Water Monitoring: No

• Feedwater Pressure: 100psig (6.9 bar)

• Voltage: 100 to 240VAC

• Hertz: 50/60Hz

• Inlet Water Temperature (Metric): 4° to 40°C
• Electrical Requirements: 100 to 240VAC 50/60Hz

Description:

The Thermo Scientific EC3000-90 Power Supply is a high voltage unit suited for most electrophoresis applications.

Specifications:

• Max Output Voltage: 3000 V
• Max Wattage: 300 W
• Max Amperage: 300 mA
• Input Voltage: 115 V
• Frequency: 50/60 Hz

Excellent choice for clinical and medical purposes, as well as scientific research. This microscope can be set up to meet a multitude of different applications based on the end user's specific needs.

Specifications:

• Objective: CF160
• Objectives: Field number 22 (with ergonomic tube/binocular tube/cytodiagnostic unit), 25 (with trinocular eyepiece tube T/F)
• Nosepiece: Sextuple
• Average Lamp Life: 100 Hrs
• Lamp Type: Halogen Lamp
• Drive System: Manual Coarse
• Stroke: 2 mm upward, 28 mm downward
• External dimensions: 184 (W) x 358 (H) x 383 (D) mm
• Weight: 9 kg

 Features:

• Applications: fluorescence and colorimetric
• Software: easy-to-use software for darkroom control, image capture, enhancement and analysis
• Camera: high sensitivity, high resolution scientific grade CCD camera with 2.0 megapixel resolution, extendable to 6.0 megapixels
• Lens:5-75 f/1.2
• Overhead Light Selector: White light, 365 nm UV, 254 nm UV
• Flters: ethidium bromide, SYBR Green, SYBR Gold
• Visible color stains: Coomassie, Silver
• Allows to visualize chemiluminscent reactions
• Manual lift platform, 3 emission filters, white light plate, overhead UV, white light and blue light
• Transilluminator: Choice of UV transilluminator models

The Sorvall F-20 Micro Fixed Angle Rotor processes and pellets microtubes with 32 place capacity. This rotor is compatible with the Thermo Scientific Sorvall Evolution RC centrifuges and the Sorvall RC06 Plus series centrifuges.

Specifications:

• Maximum RCF: 51427 xg
• Length of Tube: 38 mm
• Net Weight:8 kg
• Radius Max:1 mm
• Radius Min:7 mm
• Minimum RCF: 38, 291 xg
• K factor: 187
• Angle: 45 degrees
• Capacity: 32 x 1.5 mL
• Diameter of Tube: 11 mm
• Maximum Speed: 20000 rpm

Description:

The Thermo IEC Centra-GP8 series are general purpose centrifuges designed for use in medical, industrial and scientific laboratories. The Centra-GP8 series can develop a maximum relative centrifugal force of 4630 times gravity using the 822A rotor. The centrifuges will accommodate a range of centrifuge tubes and devices including 750 mL bottles, microplates, cytological slide carriers, and microsample tubes. Maximum sample load is 3 Liters. The Thermo IEC Centra-GP8 has an ergonomic touchpad control panel with bright , easily read LED displays. The unit can be operated in manual mode, hold or one of the 35 programmable operations.

Features:

• Forces up to 4,630 Times Gravity
• Speeds up to 5,600 rpm
• 3-liter Capacity
• Speed Accuracy up to ±10 rpm
• Coast Mode
• Quiet Operation

Description:

The Thermo Scientific H-6000A, HBB-6, and HLR-6 are six-place swinging bucket rotors designed for use in the Thermo Scientific RC 3B, RC 3B+ , RC 3C, RC 3C+, RC 3BP™ and RC 3BP™+ Centrifuges. Each rotor has a maximum speed of 5000 rpm1  and can generate relative centrifugal force (RCF, or g-force) values in excess of 7200. Each rotor consists of a stainless steel rotor body, an aluminum alloy windshield and cover, and six aluminum alloy buckets. The three rotors all use the same body, windshield and cover assembly, but they are differentiated by three different bucket configurations.

Specifications:

• Material: Stainless Steel Rotor Body/Aluminum Bucket
• Type: Swinging Bucket Rotor
• Capacity: 6 x 1,000 mL
• Max. RCF: 7,277 x g
• Max. Speed: 5,000 rpm
• Radius: 260.6 mm
• Radius Min.: 120.3 mm
• K Factor: 7823
• Min. RCF: 3,359 x g

Shimadzu's Cannabis and Hemp Testing Solutions cover a broad range of applications, from accurate potency testing and terpene profiling to contaminate testing for pesticides, residual solvents, heavy metals, and mycotoxins/aflatoxins. We supply the instruments, methods and experience necessary to get you up and running quickly. Shimadzu scientific instruments have been applied to natural products, food sciences, pharmaceuticals and environmental testing for decades. Whether you are a chromatography expert or a novice, our platforms and training ensure that your laboratory will generate quality results from a wide variety of cannabis samples. Our easy to use platforms save you time and money, maximizing the profits of your laboratory. Shimadzu can help you with your QA/QC testing, peak harvesting analysis and cannabis research.

System Includes:
Shimadzu Hemp Analyzer - Prominence 2030-C HPLC with Computer, Computer Interface, Column, Hemp Analyzer Solution.

Save time with the fast sample processing of Thermo Scientific Sorvall Legend Micro 17 microcentrifuges, providing productivity, versatility, safety and convenience in a compact, easy-to-use lab instrument.  Lightweight microcentrifuge rotors are designed for everyday laboratory use and performance up to 17,000xg.

Specifications:

• Capacity: 24 x 1.5/2 mL

• Maximum Speed: 13,300 rpm

• Maximum RCF: 17,000 xg

• Temperature Range: Ambient Temperature

• Power Requirements: 230V, 50/60Hz

• Dimensions: 8.9 x 9.6 x 13.8 in

Features:

Support micro-volume protocols such as nucleic acid or protein lysate preparation and PCR reaction set-up all in a remarkably small footprint with Thermo Scientific Sorvall Legend MicroCL 17R microcentrifuges. Choose between 7 lightweight microcentrifuge rotors, designed to provide acceleration up to 17,000 x g and refrigeration offers cooling from room temperature to set temperature in as little as 9 minutes.

Specifications:

• Electrical Requirements: 100V 50/60Hz