Used Lab Equipment

A thermostatically controlled heated benchtop water bath with oscillating shaker, used for general immersion heating of labware/vessels with gentle mixing or agitation.

Specifications:

• Chamber Dimensions: 13 x 20 x 60.7 in
• Temperature Range:Ambient to 95°C
• Adjustable Stroke Length:5 to 1.5 in

Specifications:

• Reciprocal Shaking Bath
• Capacity: 14.5L
• Oscillation Speed: 30-200 cycles per minute
• Stroke Length: 1/2 to 1-1/2 inches.

Description:

• Microprocessors Ensure Precise Control of temperature, agitation speed and running time
• Temperature Range: 7°C above ambient to 80°C. Optional cooling coil available for near and below ambient conditions
• Agitation 50 - 300 rpm, + 2 rpm
• 1/2” (1.3 cm) Circular Orbit
• Unique Acceleration/Deceleration Circuit prevents splashing and reduces mechanical wear for long life
• Timed Studies with Automatic Agitation Shut-Off can be programmed, adjustable from 0.1 to 99.9 hrs.
• Round-Cornered Bath of One Piece Heavy-Gauge Stainless Steel is crevice-free, easy-to clean, and rust-resistant. This multi-functional shaking water bath can maintain temperatures up to 80°C, making it ideally suited for hybridization studies, gel staining - destaining, as well as for culturing cells. An optional cooling coil extends its range of applications.
• Heat Loss and Evaporation Minimized with use of optional Plexiglas or stainless-steel gable cover.
• Audible & Visual Alarms alert the user to setpoint deviations
• Thermostat Fail-Safe shuts off heaters in case of over-temp.
• Interchangeable Accessory Platforms, 12" x 16.5" (31 x 42 cm) accommodate flasks, tubes and gel trays
• Half-Size Platforms with Clamps already mounted, provide maximum capacity for shaking different sized flasks

Specifications:

• Shaking:

• Range and Control: 50 to 300 rpm ±2 rpm over entire speed range by means of PI Microprocessor control
• Motion: 1/2" (1.3 cm) diameter circular orbit
• Indication: Digital LED display in 1 rpm increments
• Timer: Programmable shaking periods from 0.1 hr to 99.9 hrs. Shuts off agitation at end of period. Can be deactivated for continous operation.

• Temperature
  • Range: 7°C above ambient to 80°C
  • Regulation: PI microprocessor feedback control with platinum RTD sensor, employing pulse-width modulation of heater
  • Control: ±0.25°C
  • Indication: Digital LED Display in 0.1°C increments
  • Heaters: Low-watt density resistance-type heaters
• Alarms: Visible warning signal indicates when speed deviates more than 5 rpm, temperature more than 1°C from setpoints, and when timer has expired
• LED Display: Indicates speed, running time, alarm conditions and temperature. Displays readout of internal clock. Character height 3/8” (0.95 cm)
• Drive: Eccentric counterbalanced drive with permanently lubricated ball bearings
• Drive Motor: Variable speed AC motor
• Safety: Sensor shuts off heaters if high temperature limit is exceeded
• Setpoint Retention: Setpoints and operating status retained by non-volatile memory. Automatic restart after power is restored. (Indicated by flashing display)
• Electric Service: 100/120 V, and 230/240 V, 50/60 Hz, 960 Watts
• Dimensions (W x D x H): 21.4” x 26.9” x 18.5” (54 x 68 x 47 cm)
• Weight: 145 lbs. (66 kg)
• Ambient Operating Conditions: Temperature 5°C - 35°C. Humidity: 20% - 90% RH, non-condensing

The Precision Model 25 (14.5L) shaking bath provides accurate temperature control and quiet reciprocal shaking action. Set temperature (in increments of 0.1C) and oscillation speed via control-panel touchpad. Angled panel facilitates data entry and viewing of LED readout. Microprocessor- controlled proportional integral temperature control and solid-state sensing probe provide excellent temperature sensitivity.

Specifications:

• Interior Dimensions: 12 x 15 x 6 in
• Exterior Dimensions:14 x 24 x 12 in
• Chamber Capacity:5 L
• Temperature Range:+5°C to 99.9°C
• Temperature Uniformity:+/- 0.05°C
• Temperature Sensitivity:+/- 0.05°C
• Oscillations Speed: 30 - 200 opm
• Stroke Length:5 to 1 inch
• Dimensions: 12 x 15 x 7.5 in
• Power Requirements: 120V, 1000W, 8.8A

Thermo Scientific Precision shaking water baths support a range of sensitive life science and QA/QC applications – from warming fragile reagents to tissue culturing and genetics sequencing. Easily clean and maintain your bath with new coil-free interior. The Precision shallow form shaking bath has a removable tray that allows for use with smaller sample containers. Precision Dubnoff shaking water baths are designed specifically for applications that require your samples to be incubated in a controlled atmosphere.

Specifications:

• Chamber capacity:1 gal (26.5 liters)
• Maximum temperature:9 °C
• Temperature uniformity at 37 °C: ± 1 °C
• Oscillations per minute:30 – 200
• Stroke length:5 to 1.5 in
• Dimensions (L x W x H):12” x 27” x 7.5” for Chamber
• Dimensions (L x W x H):14” x 36.5” x 9.5” for exterior
• Weight: 62 lbs (27.2 Kg)
• Electrical: 120 VAC

The new Incu-Shaker™ Mini is the most compact shaking incubator in its class. Despite the remarkably small footprint, a large 11.5 x 9.5 in. work space accepts several platforms for use with a variety of flasks, tubes and other common vessels.

The standard platform (included) features a non-slip rubber coated surface, ideal for tissue culture flasks, petri dishes and staining trays. The unique, magnetic attachment method is the easiest way to instantly change between flask clamps of different sizes. The integral microprocessor includes a constant monitoring system that ensures accuracy through the duration of the program. Sophisticated over-temperature and over-speed controls ensure long life, safety and sample integrity.

Specifications:

• Temperature Range: Ambient +5° to 70°C
• Temperature Increments: +0.1°C
• Temperature Uniformity: ±0.25°C
• Temperature Accuracy: ±0.1°C
• Shaking Speed Range: 30 to 300rpm
• Speed Increments: 1rpm
• Shaking Orbit: 19mm (4/4")
• Operating Temp Range: +4 to +65°C
• Platform Dimensions: 9.5 x 11.5 in./28 x 41 x 33 cm
• Exterior Dimensions (W x D x H): 11 x 18.8 x 13 in. / 28 x 48 x 33 cm
• Height /w lid open: 25 in. / 63 cm
• Timer: 1 min. to 48 hours / continuous
• Weight: 25 lbs (11.5kg)
• Electrical: 115 or 230V, 50-60Hz, 300W

Incu-Shaker™ 10L is a heavy-duty performer, designed for heavy workloads and continuous use. Its outstanding temperature accuracy and uniformity are supported by proprietary heat distribution technology that ensures that temperatures are precisely maintained throughout the chamber. Inconsistencies due to stratification are reduced to negligible levels and the selected temperature is precisely maintained within 0.25%, even in the corners. The powerful brushless induction drive is designed for years of trouble-free service, even under continuous use conditions with heavy loads. Noise and vibration are minimized by an advanced, computer designed motor isolation system. Like other Incu-Shaker models, the 10L is built to last. A standard, rubber mat platform is included and is ideal for use with tissue culture flasks, Petri dishes, staining trays and other flat vessels.

Specification:

• Speed: Variable, 30 to 300 rpm
• Orbit: 19mm / 3/4 in.
• Temp Range(10L): Room Temp. +5 to 60°C
• Temp Range(10LR): Room Temp. -15°C to 60°C
• Temp. Increment: 0.1°C
• Temp. Accuracy: +/- 0.1°C
• Temp. Uniformity: +/- 0.25°C

Incu-Shaker™ 10L is a heavy-duty performer, designed for heavy workloads and continuous use. Its outstanding temperature accuracy and uniformity are supported by proprietary heat distribution technology that ensures that temperatures are precisely maintained throughout the chamber. Inconsistencies due to stratification are reduced to negligible levels and the selected temperature is precisely maintained within 0.25%, even in the corners. The powerful brushless induction drive is designed for years of trouble-free service, even under continuous use conditions with heavy loads. Noise and vibration are minimized by an advanced, computer designed motor isolation system. Like other Incu-Shaker models, the 10L is built to last. A standard, rubber mat platform is included and is ideal for use with tissue culture flasks, Petri dishes, staining trays and other flat vessels.

Specification:

• Speed: Variable, 30 to 300 rpm
• Orbit: 19mm / 3/4 in.
• Temp Range(10L): Room Temp. +5 to 60°C
• Temp Range(10LR): Room Temp. -15°C to 60°C
• Temp. Increment: 0.1°C
• Temp. Accuracy: +/- 0.1°C
• Temp. Uniformity: +/- 0.25°C

Ideal for the culturing of non-adherent cells, the Incu-Shaker CO2 Mini combines a precision CO2 incubation chamber with an integral orbital shaker, providing the optimum conditions for suspension cell culture. The unique and proprietary heat distribution technology allows the incubator to provide the highest levels of temperature accuracy with minimal fluctuation (within 0.1°C). The six-side heating system in combination with a low speed internal fan uniformly spreads air throughout the stainless steel chamber (without air exchange from the external environment). For applications requiring solely gravity convection, this internal fan can be disabled, significantly reducing the concern of sample to sample contamination. A beltless motor drive provides a horizontally circular shaking motion at a consistent 19mm orbit. The included platform can be used for low speed shaking of a variety of laboratory vessels, including Erlenmeyer flasks, culture plates and media bottles.

Specifications:

• Temperature Range: Ambient +5° to 60°C
• Temperature Increments: 0.1°C
• Temperature Uniformity: ± 0.5°C*
• Temperature Accuracy: 0.1°C
• Speed Range: 30 to 300rpm
• Speed Increments: 1rpm
• Mixing Orbit: 19mm (3/4 in.)
• CO2 Range: 0 to 20%
• CO2 Increment: 0.1%
• CO2 Accuracy: ± 0.1%
• CO2 Sensor: Dual Beam IR
• Timer: 1 min. to 48 hours / continuous
• Platform Dimensions: 28 x 41 x 33 cm
• Chamber Dimensions: 33.5 x 26 x 39.2 cm
• Chamber Volume: 46L
• Chamber Material: Stainless Steel (316)
• Exterior Dimensions: 16.5 x 18.3 x 21.8 in. / 42 x 46.5 x 55.3 cm
• Weight: 90 lbs / 40.1 kg
• Electrical: 120V or 230V, 50-60Hz (350W)

Thermo Scientific MaxQ 6000 (SHKE6000-7) Incubated/Refrigerated Stackable Shaker offers sample storage and orbital shaking with intuitive, easy-to-use digital controls. These shakers save space by stacking units two-high on the floor.Choose from two temperature ranges to fulfill a variety of molecular biology, protein expression or plasmid purification studies.

Specifications:

• Platform Dimensions: 18 x 18 in
• Overall Dimensions:33 x 27 40.5 in
• Speed Range:15 - 300 rpm +/- 1 (stacked)
• Speed Range:15 - 500 rpm +/- 1 (unstacked)
• Temperature Range:Ambient 10°C to 60°C°
• Orbit:75 in
• Shipping Weight:330 lb
• Power Requirements:120V, 60Hz

Specifications:

• Digital Controller
• 1000W heater
• Temperature range ambient +5C up to 200C
• 6L chamber capacity

Specifications:

• Temperature Range (Metric): Ambient to 95° or 99°C
• Voltage: 120V
• Cabinet Material: Epoxy powder-coated stainless steel
• Chamber Material: Stainless steel
• Depth (English) Interior: 6 in.
• Depth (Metric) Interior: 15.2cm
• Height (English) Exterior: 9.75 in.
• Height (Metric) Exterior: 24.8cm
• Hertz: 50/60Hz
• Length (English) Exterior: 16.2 in.
• Length (Metric) Exterior: 41cm
• Temperature Resolution: ±0.1†°C
• Temperature Uniformity: ±0.2°C
• Wattage: 300w
• Width (English) Exterior: 8 in.
• Width (English) Interior: 6 in.
• Width (Metric) Exterior: 20.3cm
• Width (Metric) Interior: 15.2cm
• Amperage: 2.5A
• Capacity (Metric): 5.5L
• Control: Analog
• Length (English) Interior: 11.5 in.
• Length (Metric) Interior: 29.2cm
• Operating Temperature: 99.9°C
• Dimensions (L x W x H) Exterior: 16.2 x 8 x 9.75 in. (41 x 20.3 x 24.8cm)
• Electrical Requirements: 120V 50/60Hz
  
  

Features:

Ideal for industrial, clinical, pharmaceutical or biomedical applications

Microprocessor PID Control

• ±0.24°C uniformity, ±0.5°C accuracy and stability at 37°C
• Display shows °C or °F; easy to read from across the room

Safety Features

• Low profile and front-panel controls for easier access, safer operation
• Dual thermostats guard against thermal runaway
• Hinged acrylic or stainless-steel gable covers have fins that keep hands away from hot vapors
• Covers stay open at 90° or, with quick-release hinge, lift off completely for use with large glassware
• Heating elements will not burn out if bath accidentally runs dry

Construction

• Corrosion-resistant exterior with tough, easy-to-clean acrylic enamel coating
• Temperature-resistant plastic rim insulates, resists leaks, keeps its shape and won't dry out or crack like caulked seals
• Exterior stays cool even after hours of operation Deep-drawn, stainless-steel reservoirs and perforated sample trays prevent leaks, guard against rust and contamination
• Rounded reservoir corners and sample trays with finger holes allow for easy removal, make cleaning easier
• Choice of acrylic or stainless-steel covers

Specifications:

• Capacity: 0.5 gal., 2L
• Temperature Range (Metric): Ambient to 100°C
• Resolution (Temperature): 0.1°C/F
• Temperature Stability: ±0.5°C
• Dimensions (L x W x H) Exterior: 9.88 x 10.75 x 7.62 in. (25 x 27 x 19cm)
• Dimensions (D x W x H) Interior: 5.25 x 5.88 x 6 in. (13 x 14.8 x 15cm)