Used Lab Equipment

Features:

• Clean-duty use
• Protrudes 2" on clean side wall
• Continuously-welded seams
• Automatic mechanical interlock
• SS reinforced door frames and one piece gasket
• Supports vacuum up to 29.9 inHg

Specifications:

• Outside dimensions: 13x14x16"
• Inside dimensions: 8x8x12"

Features:

The Biorad Universal Hood II Gel Doc is an easy-to-use, high-performance system that captures images in real time, allowing you to more accurately position and focus on your sample. The Gel Doc system combines a compact darkroom, UV-transilluminator workstation, CCD camera, motorized zoom lens, and user-friendly Quantity One software to document and quantitate gels stained with ethidium bromide and other fluorophores. The iris, zoom, and focus of the lens can be manipulated either onscreen within Quantity One software or by the instrument control panel. With Biorad's intuitive software, images acquired with the Gel Doc can be rapidly optimized, annotated, analyzed, and printed.

Specifications:

• Maximum sample size: 28 x 36 cm
• Maximum image area: 25 x 26 cm
• Excitation source: Trans UV 302, 254, 365 nm & White, Epi-White light
• Illumination control: 3 modes (trans-UV, trans white, epi-white)
• Detector: CCD
• CCD resolution (H x V): 768 x 494 RS-170  752 x 582 CCIR
• Pixel size in microns (H x V): 8.4 x 9.8
• Filter holder: 2 positions (1 Emmision Filter, 1 Chemi)
• Emission filters: 1 included (amber), 4 optional
• Dynamic range: 1.8 Orders
• Pixel density (gray levels): 8 bit (256 gray levels)
• Dynamic flat fielding: No

Safely handle and recover solvents with the Thermo Scientific Savant Universal SpeedVac Vacuum System, equipped with an easy to use, wide-mouth glass condensation flask. This single integrated unit combines an oil-free vacuum source and refrigerated vapor trap, and can be connected to any of the concentrators to provide a complete SpeedVac system.

Description:

• Low maintenance, oil-free and corrosion resistant system
• Wide mouth glass condensation flask with self-sealing cover
• Small footprint
• Single stage refrigeration system
• Efficient operation with all SpeedVac concentrators, gel dryers and other vacuum-dependent equipment
• Optional post trap (model no. ANT100) may be added to neutralize ammonia or acid
• Chemical trap (model no. DTK120R) may be added to absorb volatile radioactivity and residual vapor
• vacuum <10 torr (13.3mbar)
• Oil-free ETFE diaphragm pump
• 36 liters/minute displacement on 60Hz; 30 liters/minute on 50Hz models

Features:

The small universal laboratory centrifuge offers a wide range of applications, which covers clinical laboratory requirements,research, as well as industrial laboratory use.

The Z 306 offers many accessories, including rotors for microtitreplates and high-speed fixed angle rotors for reaction vessels or centrifuge tubes up to 50 ml. Additionally, swing out rotors, which hold a volume of up to 4 x 145 ml can be used for tissue culture tubes and also for all common blood tubes.

This wide range of accessories makes the Z 306 laboratory centrifuge indespensable in research laboratories and small clinical laboratories.

Specifications:

• Max. Speed: 1400 rpm
• Max. RCF: 18624 xg
• Max. Volume: 4 x 145 ml
• Speed range: 200 - 14000 rpm 
• Running time: 59 min 50 s / 10 increments, 99 h 59 min / 1 min increments
• Dimensions (WxHxD): 35 cm x 33 cm x 47 cm
• Weight: 30 kg

Features:

Both the table top centrifuge Z 326 and the refrigerated table top centrifuge Z 326 K offer a wide assortment of rotor options, making them ideal for a wide variety of research applications. Rotor exchange between swing out, micro, or high volume angled rotors is very simple and can take place in a matter of seconds.

The Z 326 K includes the refrigeration system on the back side of the unit, optimized for the lab bench at only 40 cm wide.

Specifications:

• Max. Speed: 18000 rpm
• Max. RCF: 23542 xg
• Max. Volume: 4 x 100ml
• Speed range: 200 - 18000 rpm 
• Running time: 59 min 50 s / 10 s increments, 99 h 59 min / 1 min increments
• Dimensions (WxHxD): 40 cm x 36 cm x 48 cm
• Weight: 43 kg

Features:

These universal table top centrifuges Z 366 and Z 366 K putting new scales regarding the versatility, running features, easy handling and design.

Both, the tube capacity of 40 x 15 ml conical tubes and centrifugal forces up to 21379 xg, making these table top centrifuge Z 366 into a universal high-powered centrifuge.

Specifications: 

• Max. Speed: 15000 rpm
• Max. RCF: 21379 xg
• Max. Volume: 6 x 250ml
• Speed range: 200 - 15000 rpm
• Running time: 59 min 50 s / 10 s increments, 99 h 59 min / 1 min increments
• Dimensions (WxHxD): 43 cm x 36 cm x 51 cm
• Weight: 52 kg

Features:

These high-volume centrifuges Z 446 and Z 446 K achieve a throughput of 68 x 15 ml conical tubes or 28 x 50 ml conical tubes at a max.RCF of 3434/4346 xg.

If higher speeds are required, we also offer e.g. an angle rotor with a max. RCF of 14532/16022 xg for 10 x 50 ml.

The fixed-angle and swing-out rotors are suitable for almost all aplications in everyday use in clinical, industrial and research laboratories.

Specifications: 

• Max. Speed: 16000 rpm
• Max. RCF: 24325 xg
• Max. Volume: 4 x 750 ml
• Speed range: 200 - 16000 rpm
• Running time: 59 min 50 s / 10 s increments, 99 h 59 min / 1 min increments
• Dimensions (WxHxD): 54 cm x 39 cm x 67 cm
• Weight: 79 kg

Features:

These high-volume centrifuges Z 446 and Z 446 K achieve a throughput of 68 x 15 ml conical tubes or 28 x 50 ml conical tubes at a max.RCF of 3434/4346 xg.

If higher speeds are required, we also offer e.g. an angle rotor with a max. RCF of 14532/16022 xg for 10 x 50 ml.

The fixed-angle and swing-out rotors are suitable for almost all aplications in everyday use in clinical, industrial and research laboratories.

Specifications: 

• Max. Speed: 16000 rpm
• Max. RCF: 26328 xg
• Max. Volume: 4 x 750 ml
• Speed range: 200 - 16000 rpm
• Temperature Range: -20°C bis 40°C
• Running time: 59 min 50 s / 10 s increments, 99 h 59 min / 1 min increments
• Dimensions (WxHxD): 73 cm x 39 cm x 67 cm
• Weight: 11 kg

Features:

Frontier 5000 Multi Pro Centrifuges are designed for universal use in research, industrial & clinical laboratories, and can be combined with our rotors & accessories for customized use in specific applications. Available in 5 models with capacities from low microliter to 6x250 ml, and featuring high-speed performance at maximum volume, automatic rotor identification and safety features - these multi-purpose centrifuges are a must for any lab.

Applications

Centrifugal Separation, General Sample Preparation, Cell Pelleting, Protein Separation, Nucleic Acid Separation, Cell Concentrating, Chemical Separation, Diagnostics, Environmental Sample Preparation, Blood Sample Processing

Display

Backlit Liquid Crystal Display (LCD)

Operation

Designed to be used with a variety of rotors and accessories

Communication

N/A

Construction

Corrosion-resistant stainless steel chamber with Polycarbonate/ABS plastic lid

Design Features

Ten acceleration & deceleration rates, selection of running time from 10s to 99h 59min or continuous, quick spin, CFC-free refrigeration system, sample temp. indication (refrigerated models), lid-locking system, over-speed protection, dual imbalance sensing

Specifications:

• Speed Range:200 rpm – 15,000 rpm

• Maximum Relative Centrifuge Force (x g):21,379 g

• Maximum Capacity (Rotor):6x250 ml

• Acceleration Gear:10

• Deceleration Gear:10

• Dimensions (HxLxW):13.94 in x 21.18 in x 17.56 in (354 mm x 538 mm x 446 mm)

• Display: LCD with backlight

• Net Weight：115 lb (52 kg)

• Noise Level:≤61±2 dB(A)

• Power Consumption: 520 W

• Rotor Recognition Method: Auto

• Running Time: Quickspin;  10 sec to 99 h 59 min 59 sec;  Continous

• Safety Certification: CE;  FCC

• Working Environment:36°F – 95°F, 80%RH, non-condensing (2°C – 35°C, 80%RH, non-condensing)

The SmartReader 96 comes complete with 4 popular filters: 405,450,492,630nm and twenty six additional filters are available separately to cover a full range from 340 to 750nm.  The integrated filter wheel allows up to 8 filters to be loaded at once, and filters can be selected during programming. Up to two filters can be used for 2 measurements of the sample plate, for calculated comparisons.  Kinetic calculations can be performed by setting multiple readings. The SmartReader 96 is a convenient stand alone reader, all software and the programing system is incorporated into the electronics. However, a convenient USB port on the side allows quick and easy saving of data files to a USB drive, and the universal .csv files can then be shared or transferred to a computer for storage or further processing.  A data port can be used for connecting a computer or basic printer.

Specification:

• Control and Display: 7 inch touch screen (800 x 480 pixels)
• Light Source: Quartz-halogen lamp 6V/10W
• Wavelength Range: 340-750nm (405, 450, 492 and 630 nm filters included)
• Half-Bandwidth of filter: 3~9nm
• Readout Range: 0~4.000 Abs
• Linearity (405nm): 0~2.000 Abs <+1% / 0~4.000 Abs <+2%
• Precision: CV</= 0.2% (0-3) Abs ; CV</= 01.0% (3-4) Abs
• Test Speed: <6 sec. for 96 well plate
• Shaking: 3 modes - slow, medium, fast
• User Interface: Integrated software and touch screen control
• Storage: 200 programs; 100,000 test records
• Ports: USB ports for PC, printer, mouse and flash drive
• Dimensions: 295x440x225 mm (11.6 x 17 x 8.75 inches)
• Weight: 10 kg

A revolutionary design packed with features, the AE2000 sets a new benchmark in affordable inverted microscopy.

Motic’s new AE2000 Inverted Microscope is designed for routine live cell inspection with an easy and flexible set up, ideal for University, routine-clinical, and lab environments. The model’s main applications offer superior image quality when viewing cell cultures in microbiology, living organisms and tissue culture samples.

The newly designed Binocular Ergo tubes with 360° swiveling “butterfly” design offers the most comfortable observation position, especially useful for prolonged sample viewing. The auto on/off function of the power supply extends the lifespan of the sample and light bulb and at the same time saves energy. Another added feature, a modular interchangeable illumination concept, allows for the easy transition from Halogen to LED to fulfill a wide-range of customer viewing expectations. The improved phase contrast quality of the model makes the instrument suitable for a greater range of applications that demand precision optics.

The entire microscope including optical system is manufactured now completely Lead Free, following the International RoHS regulations.

Features:

• AE2000 Binocular Inverted Microscope with PL PH 20x
• Binocular head Siedentopf type 45° inclined
• Widefield high eyepoint eyepiece 10X / 20mm (paired), focusable
• Side facing quadruple nosepiece
• CCIS Plan Achromat objective PL PH4x, PL PH 10x, PL PH 20x
• ELWD N.A. 0.30 condenser
• Phase slider Ph0, BF, Ph1
• Centering telescope
• Plain Stage with metal & glass stage inserts
• Halogen illumination 6V/30W with intensity control
• 45mm blue, Green Interference and Diffusion filters with filter slider
• Allen hexagonal key, vinyl dust cover, power cord
• Universal Power Supply 100-240V

Performance

• Restacking feature allows plates to be returned to the input stack in their original order
• Can be operated without an external computer when used with the ELx405 Microplate Washer, MicroFill Microplate Dispenser, NanoQuot Microplate Dispenser, or MicroFlo Select Microplate Dispenser
• 30 or 50 standard height microplates (96- or 384-well) per interchangeable stack Optional rotational wrist allows users to integrate both landscape and portrait orientation microplate carriers with the instrument remaining in its optimal, ergonomic-friendly position
• Variable microplate input Small footprint conserves precious benchtop space; fits easily in most standard laboratory hoods

Design

• Universal design compatible with most supported BioTek instrumentation Designed for heavy use with aluminum precision-ground base Linear mechanisms built around proven BioTek technology Quiet operation with cams activated by stepper motors No moving parts to wear within motors Gripper incorporates rack and pinion drive for synchronistic movement Reliable transport with microplate gripped from below Onboard self-diagnostics ensure trouble-free operation

Specifications:

Performance:

• Restacking feature allows plates to be returned to the input stack in their original order
• Can be operated without an external computer when used with the ELx405 Microplate Washer, MicroFill Microplate Dispenser, NanoQuot Microplate Dispenser, or MicroFlo Select Microplate Dispenser
• 30 or 50 standard height microplates (96- or 384-well) per interchangeable stack Optional rotational wrist allows users to integrate both landscape and portrait orientation microplate carriers with the instrument remaining in its optimal, ergonomic-friendly position
• Variable microplate input Small footprint conserves precious benchtop space; fits easily in most standard laboratory hoods

Design:

• Universal design compatible with most supported BioTek instrumentation Designed for heavy use with aluminum precision-ground base Linear mechanisms built around proven BioTek technology Quiet operation with cams activated by stepper motors No moving parts to wear within motors Gripper incorporates rack and pinion drive for synchronistic movement Reliable transport with microplate gripped from below Onboard self-diagnostics ensure trouble-free operation

Features:

• <10 seconds plate exchange time
• Range of formats including 24-, 48-, 96-, 384- and 1536-well
• 10, 30, or 50 standard height microplates per interchangeable stack
• De-lidding and re-lidding capability with patented BioStack 4
• Rotational gripper for ergonomic  and compact integration
• Restacking capability
• Optional barcode scanner
• Direct control through washer and dispenser interface or via LHC or Gen5 PC software
• Small footprint conserves precious bench top space
• Walk away automation