Used Lab Equipment

Used Lab Equipment

We offer an assortment of used and refurbished Hoods ranging from Biosafety Cabinets, Laminar Flow Hoods and Fume Hoods to Glove Boxes. Some of our popular manufacturers include Baker, Labconco, Thermo Forma, Nuaire, Plas-Labs and Sheldon.

Terra Universal: 16-30 of 80

*Please Select a Category and/or Manufacturer dropdown OR Search By Model Name, # or Keyword.* Advanced Search >
Mettler Toledo AT261 Analytical Balance

Mettler Toledo AT261 Analytical Balance

Cambridge ID #: 22354

Features:

  • Standard asynchronous serial format
  • Baud rate and parity freely selectable
  • Bidirectional data transfer
  • Break recognition
  • Galvanic isolation
  • RS-232 and 20 mA current loop
  • Several handshake modes
  • 7-bit ASCII character set
  • Extensive command set – access to virtually all balance parameters
  • Easy connection to printers and computers

 

Specifications:

  • Readability: 0.01 mg - 0.1 mg
  • Weighing capacity: 62 g - 205 g
  • Taring range (by subtraction): 0…205 g
  • Reproducibility (s) 0...50 g: 0.015 mg
  • Reproducibility (s) 50...100 g: 0.02mg, 0.03 mg
  • Reproducibility (s) 100...200 g: 0.03mg, 0.05mg
  • Linearity: ± 0.03mg, ± 0.15mg
  • Linearity referred to 5 g: ± 0.02 mg
  • Stabilization time (typical) variable with vibration adapter: 8,12,18 s - 3,5,7 s
  • Built-in calibration weights: 2x100 g. Measured to ±0.1 mg (±0.01 mg AT20/21) at an air density of 1200 mg/l on virtual mass with density 8.0 g/cm3.
  • Calibration FACT: Fully automatic motorized self-calibration with two built-in weights (manual triggering also possible). Test possibility to check the calibration.
  • Calibration with external weight: 200 g
  • Display with METTLER Deltatrac: LCD (liquid crystal)
  • Display sequence: 0.2...0.4 s variable
  • Sensitivity drift (5...40°C): Maximum deviation with automatic self-calibration ±0.00015%, (with automatic self-calibration switched off) 1 ppm/°C.
  • Linearization: Automatic self-linearization of the weighing curve (simultaneously with motorized calibration FACT).
  • Data interface: CL and RS232C, bidirectional, built in as standard, all lines galvanically separated.
  • Glass draft shield: No hindering guideways; automatic motorized opening or at a keystroke. 
  • Inner draft shield AT: Standard
  • AC adapter (to national codes): Voltage 115 V or 230 V, admissible voltage fluctuations: +15...-20%. Frequency: 50...60 Hz; power consumption 15,5W max.
  • Admissible ambient conditions: Temperature: 5...40 °C; relative humidity: 25...85% (non-condensing). Height above sea level: -500...+6000 m.
  • Weighing pan feedthrough for below-the-balance weighing: 80x80 [mm]; stainless steel
  • Measures: Free height above weighing pan 239 mm, Balance housing 241x433x289 (WxLxH), AC adapter 115x140x53mm (WxLxH)
  • Weight: Balance 9.3 kg, AC adapter 1.2 kg
  • Vibration adapter (symbol [ ~ ]): 3 settings for matching to location: suppression of the effect of vibrations.
  • Weighing process adapt. (symbol [ ]): 4 settings for matching to weighing application: dispensing, universal setting, absolute weighing, special applications.
  • Stability detection (ASD): 8 settings with different tolerance thresholds (off, 1...7). 
  • Weight unit 1: Freely selectable in the configuration register: g, mg, oz, ozt, tl, GN, dwt, ct, C.M., mo.
  • Weight unit 2 (incl. applications): Freely selectable in the configuration register: g, mg, oz, ozt, tl, GN, dwt, ct, C.M., mo, PCS, Stk, %. The selected weight units 1 and 2 can be switched at a keystroke.
  • Applications: PCS, Stk. (piece counting, reference 10, 20, 50, 100) and % (percent weighing) are built-in applications.
Learn More
Mettler-Toledo-AT261-Analytical-Balance-22354
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Biotek Biostack Automated Microplate Stacker

Biotek Biostack Automated Microplate Stacker

Cambridge ID #: 21854

Performance

  • Restacking feature allows plates to be returned to the input stack in their original order
  • Can be operated without an external computer when used with the ELx405 Microplate Washer, MicroFill Microplate Dispenser, NanoQuot Microplate Dispenser, or MicroFlo Select Microplate Dispenser
  • 30 or 50 standard height microplates (96- or 384-well) per interchangeable stack Optional rotational wrist allows users to integrate both landscape and portrait orientation microplate carriers with the instrument remaining in its optimal, ergonomic-friendly position
  • Variable microplate input Small footprint conserves precious benchtop space; fits easily in most standard laboratory hoods

 

Design

  • Universal design compatible with most supported BioTek instrumentation Designed for heavy use with aluminum precision-ground base Linear mechanisms built around proven BioTek technology Quiet operation with cams activated by stepper motors No moving parts to wear within motors Gripper incorporates rack and pinion drive for synchronistic movement Reliable transport with microplate gripped from below Onboard self-diagnostics ensure trouble-free operation

 

Learn More
Biotek-Biostack-Automated-Microplate-Stacker-21854
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
BioTek BioStack 2 Automated Microplate Stacker

BioTek BioStack 2 Automated Microplate Stacker

Cambridge ID #: 15606

Specifications:

 

Performance:

  • Restacking feature allows plates to be returned to the input stack in their original order
  • Can be operated without an external computer when used with the ELx405 Microplate Washer, MicroFill Microplate Dispenser, NanoQuot Microplate Dispenser, or MicroFlo Select Microplate Dispenser
  • 30 or 50 standard height microplates (96- or 384-well) per interchangeable stack Optional rotational wrist allows users to integrate both landscape and portrait orientation microplate carriers with the instrument remaining in its optimal, ergonomic-friendly position
  • Variable microplate input Small footprint conserves precious benchtop space; fits easily in most standard laboratory hoods

 

Design:

  • Universal design compatible with most supported BioTek instrumentation Designed for heavy use with aluminum precision-ground base Linear mechanisms built around proven BioTek technology Quiet operation with cams activated by stepper motors No moving parts to wear within motors Gripper incorporates rack and pinion drive for synchronistic movement Reliable transport with microplate gripped from below Onboard self-diagnostics ensure trouble-free operation

Features:

  • <10 seconds plate exchange time
  • Range of formats including 24-, 48-, 96-, 384- and 1536-well
  • 10, 30, or 50 standard height microplates per interchangeable stack
  • De-lidding and re-lidding capability with patented BioStack 4
  • Rotational gripper for ergonomic  and compact integration
  • Restacking capability
  • Optional barcode scanner
  • Direct control through washer and dispenser interface or via LHC or Gen5 PC software
  • Small footprint conserves precious bench top space
  • Walk away automation
Learn More
BioTek-BioStack-2-Automated-Microplate-Stacker-15606
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Being Instruments BIS 1 *NEW* Incubated Shaker

Being Instruments BIS 1 *NEW* Incubated Shaker

Cambridge ID #: 19583

 

Description:

The BEING Incubated Shakers are often used for cell culturing, cell aeration, and solubility studies. In addition to stable temperature conditions, they use an orbital agitation at variable speeds to affect the growth of cell cultures. Auto off and alarm occurs when the real shaking speed is 10% different from setting value, and the motor will stop automatically. BEING’s PID controller provides accurate speed, temperature with timed runs. Speed controller ensures smooth start/stop which can prevent the liquid spill to damage the equipment.

 

Features:

  • Colorful LCD display.
  • PID microprocessor controls temperature, shaking speed, and timing.
  • Smooth start and stop system prevents liquid spillage.
  • Auto-controller regulates fan speed to control air flow.
  • DC motor provides long term reliability.
  • Safety door switch, auto pause operation when door is opened.
  • Stainless-steel and easy to clean platform.
  • High efficiency filter provides filtration of bacteria and dust.
  • A large number of accessories (platforms, tube-racks, and flask clamps) to accommodate various needs.
  • Temperature-limiting alarm system, auto switch off when over-temperature.

 

Specifications:

  • Temperature Range (°F): Ambient +9 up to 122 °F
  • Temperature Resolution: 0.1 °F / 0.1 °F
  • Working Platform Size(W x D, in): 11.02 x 11.02
  • Exterior Dimension (W x H x D, inch): 15.7 x 17.3 x 24.2
  • Maximum load per shelf: 10 kg/22 lbs
  • Air Convection: Forced Air Convection
  • Shaking Speed Range: 40~300rpm
  • Amplitude: 20mm
  • Universal clamp: Standard
  • Timing Range: 1 ~ 5999mins
  • Power Supply: AC120V / 60Hz
Learn More
Being-Instruments-BIS-1-*NEW*-Incubated-Shaker-19583
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Being Instruments BIS 2 *NEW* Incubated Shaker

Being Instruments BIS 2 *NEW* Incubated Shaker

Cambridge ID #: 19584

Description:

The BEING Incubated Shakers are often used for cell culturing, cell aeration, and solubility studies. In addition to stable temperature conditions, they use an orbital agitation at variable speeds to affect the growth of cell cultures. Auto off and alarm occurs when the real shaking speed is 10% different from setting value, and the motor will stop automatically. BEING’s PID controller provides accurate speed, temperature with timed runs. Speed controller ensures smooth start/stop which can prevent the liquid spill to damage the equipment.

Features:

  • Colorful LCD display.
  • PID microprocessor controls temperature, shaking speed, and timing.
  • Smooth start and stop system prevents liquid spillage.
  • Auto-controller regulates fan speed to control air flow.
  • DC motor provides long term reliability.
  • Safety door switch, auto pause operation when door is opened.
  • Stainless-steel and easy to clean platform.
  • High efficiency filter provides filtration of bacteria and dust.
  • A large number of accessories (platforms, tube-racks, and flask clamps) to accommodate various needs.
  • Temperature-limiting alarm system, auto switch off when over-temperature.

Specifications:

  • Temperature Range (°F): Ambient +9 up to 122°F
  • Temperature Resolution: 0.1°F/0.1°C
  • Working Platform Size(W x D, in):13.78 x 13.78
  • Exterior Dimension (W x H x D, inch):19.7 x 18.171 x 25.4
  • Maximum load per shelf: 10 kg/22 lbs
  • Air Convection: Forced Air Convection
  • Shaking Speed Range: 40~300rpm
  • Amplitude: 20mm
  • Universal clamp: Standard
  • Timing Range: 1 ~ 5999mins
  • Power Supply: AC120V / 60Hz 400W
Learn More
Being-Instruments-BIS-2-*NEW*-Incubated-Shaker-19584
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Being Instruments BIS 3 *NEW* Incubated Shaker

Being Instruments BIS 3 *NEW* Incubated Shaker

Cambridge ID #: 19585

Description:

The BEING Incubated Shakers are often used for cell culturing, cell aeration, and solubility studies. In addition to stable temperature conditions, they use an orbital agitation at variable speeds to affect the growth of cell cultures. Auto off and alarm occurs when the real shaking speed is 10% different from setting value, and the motor will stop automatically. BEING’s PID controller provides accurate speed, temperature with timed runs. Speed controller ensures smooth start/stop which can prevent the liquid spill to damage the equipment.

Features:

  • Colorful LCD display.
  • PID microprocessor controls temperature, shaking speed, and timing.
  • Smooth start and stop system prevents liquid spillage.
  • Auto-controller regulates fan speed to control air flow.
  • DC motor provides long term reliability.
  • Safety door switch, auto pause operation when door is opened.
  • Stainless-steel and easy to clean platform.
  • High efficiency filter provides filtration of bacteria and dust.
  • A large number of accessories (platforms, tube-racks, and flask clamps) to accommodate various needs.
  • Temperature-limiting alarm system, auto switch off when over-temperature.

Specifications:

  • Temperature Range (°F): Ambient +9 up to 122 °F
  • Temperature Resolution: 0.1°F/0.1°C
  • Working Platform Size(W x D, in):17.72 x 17.72
  • Exterior Dimension (W x H x D, inch): 23.2 x 19.3 x 29.5
  • Maximum load per shelf: 10 kg/22 lbs
  • Air Convection: Forced Air Convection
  • Shaking Speed Range: 40~300rpm
  • Amplitude: 20mm
  • Universal clamp: Standard
  • Timing Range: 1 ~ 5999mins
  • Power Supply: AC120V / 60Hz 600W
Learn More
Being-Instruments-BIS-3-*NEW*-Incubated-Shaker-19585
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
New Brunswick C24 Incubated Shaker

New Brunswick C24 Incubated Shaker

Cambridge ID #: 8717

Specifications:

  • Capacity : 5 x 2 L Capacity & Largest Flask Size on Universal Platform
  • Volts: 120V 50/60 hz
  • Temp Range: Ambient +7 to 60

 

Learn More
New-Brunswick-C24-Incubated-Shaker-8717
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Sartorius Stedim CERTOMAT RM Type 8862435 Orbital Shaker

Sartorius Stedim CERTOMAT RM Type 8862435 Orbital Shaker

Cambridge ID #: 18321

The CERTOMAT® RM is a powerful and robust orbital benchtop shaker for the universal use in the various tasks of biological and chemical laboratories. Its compact design and its construction features allow its placement in incubators, conditioning cabinets or in shelves of a rack. The product also features an adjustable counter weight for mass balancing of the different loads applied; for optimum compensation (minimization) of vibrations caused by different loads driven at different shaking frequencies, which can be transmitted to the shaker unit and woking place.

 

Specification:

 

  • Cabinet size (W x H x D): 511 x 160 x 545 mm
  • Weight (without tray): 46 kg
  • Material: sheet steel case with acidproof varnish
  • Max. load: depending on tray and mounting system applied
  • Connector: Home-Office grounded plug, separate cable of about 3 m
  • Mains supply:  230 V / 50 - 60 Hz or 115 V / 50 - 60 Hz
  • Power consumption: 0.8 mA at 230 V or 1.6 A at 115 V
  • Fuses: fuse links 2 x T 1 A (230 V) or 2 x T 2 A (115 V)
  • Shaking frequencies: 40… 400 rpm
  • Orbital motion: 25 mm or 50 mm, depending on version "as delivered“
  • Rotation speed accuracy: max. Deviation ±1% from max setting
  • Timer operation: 00:01 [hrs:min] – 98:59 [hrs:min] ; 99:59 [hrs:min] continuous operation
  • Ambient temperature: +10 ... +60 degree C
  • Ambient humidity: 10… 90%, not condensing
Learn More
Sartorius-Stedim-CERTOMAT-RM-Type-8862435-Orbital-Shaker-18321
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
BD BioScience FacsAria IIu Cell Sorter

BD BioScience FacsAria IIu Cell Sorter

Cambridge Scientific ID #'s: 14996, 17981

Includes PM From BD and Guaranteed Installable under BD Service Contract

Upgraded to IIu and Added Violet laser in 2014

 

The new BD FACSAria II cell sorter improves ease of use, flexibility, and aseptic capability to make it the best choice for consistent results in sorting across a broad range of applications. The heart of this cell sorting revolution is the true fixed-alignment flow cell, gel-coupled to the collection optics. Fixed alignment minimizes startup time and improves reproducibility. Gel coupling to the objective lens improves collection efficiency and increases the sensitivity and resolution needed for multicolor applications.

 

The BD FACSAria II cell sorter advances cell sorting with multiple improvements. A new fluidics design improves aseptic setup and cleaning. New nozzle sizes enable a wide range of particles to be sorted. Software improvements dramatically cut the time spent on cytometer setup, adjustment, and maintenance.

 

The BD FACSAria II cell sorter also sets a new standard for ease of use to improve both workflow and productivity. A new nozzle design allows for reproducible insertions. A new universal sort tube collection mount makes it easier to insert and remove tube holders. Software wizards and automation simplify aseptic sort setup, drop-delay determination, and clog detection. Compatibility with BD digital analyzers makes it easier to move from analysis to cell sorting.

 

Includes:

  • 3 lasers
  • Blue 7PMTs, Red 3PMTs, Violet 3 PMTs
  • Computer w/ FACSDiva 8 Software
  • ACDU
  • 2 monitors
  • Fluidics Cart
  • Temperature Control
  • Lauda Chiller

 

Performance

Fluorescence Sensitivity

  • Measurements performed at 70 psi and 90 kHz using SPHERO Rainbow Calibration Particles (RCP-30-5A)
  • FITC: 125 molecules of equivalent soluble fluorochrome (MESF-FITC)
  • PE: 125 molecules of equivalent soluble fluorochrome (MESF-PE)

Fluorescence Resolution

  • Coefficient of variation (CV)
  • PI: Area, <3.0%, full G0/G1 peak for propidium iodide (PI)-stained chicken erythrocyte nuclei (CEN)
  • Hoechst: Area, <3.5%, full G0/G1 peak for Hoechst-stained CEN

Fluorescence Linearity

  • Doublet/singlet ratio:
  • CEN stained with PI: 1.95–2.05 (off the 488-nm laser) or Hoechst: 1.95–2.05 (off the 405-nm laser)

Forward and Side Scatter Sensitivity

  • Sensitivity enables separation of fixed platelets from noise, identification of bacteria, and detection of 0.5-micron beads.

Forward and Side Scatter Resolution

  • Scatter performance is optimized for resolving lymphocytes, monocytes, and granulocytes.

Sample Acquisition Rate

  • Maximum acquisition rate (events per second) with 12 compensation pairs and 8 parameters: 70,000.
Learn More
BD-BioScience-FacsAria-IIu-Cell-Sorter-14996
By clicking below we can further assist you with your inquiry. Inquire 2 In Stock Worldwide Shipping
Becton Dickinson FacsAria IIu  - 4 Lasers Cell Sorter

Becton Dickinson FacsAria IIu - 4 Lasers Cell Sorter

Cambridge ID #: 19571

Includes PM From BD and Guaranteed Installable under BD Service Contract

 

New Flow Cell installed in September 2018

Also included are the excitation laser lines, laser powers and optical configuration.

 

The new BD FACSAria IIu cell sorter improves ease of use, flexibility, and aseptic capability to make it the best choice for consistent results in sorting across a broad range of applications. The heart of this cell sorting revolution is the true fixed-alignment flow cell, gel-coupled to the collection optics. Fixed alignment minimizes startup time and improves reproducibility. Gel coupling to the objective lens improves collection efficiency and increases the sensitivity and resolution needed for multicolor applications.

 

The BD FACSAria IIu cell sorter advances cell sorting with multiple improvements. A new fluidics design improves aseptic setup and cleaning. New nozzle sizes enable a wide range of particles to be sorted. Software improvements dramatically cut the time spent on cytometer setup, adjustment, and maintenance.

 

The BD FACSAria IIu cell sorter also sets a new standard for ease of use to improve both workflow and productivity. A new nozzle design allows for reproducible insertions. A new universal sort tube collection mount makes it easier to insert and remove tube holders. Software wizards and automation simplify aseptic sort setup, drop-delay determination, and clog detection. Compatibility with BD digital analyzers makes it easier to move from analysis to cellsorting.

 

Includes:

  • 4 lasers (375nm, 488nm, 405nm, 633nm)
  • Blue 7PMTs, Red 3PMTs, Violet 3PMTs
  • HP Computer w/ FACSDiva 8.0 Software
  • ACDU
  • 1 HP monitor
  • Fluidics Cart
  • Temperature Control
  • Lauda Chiller
  • Buffalo Whisper Aerosol Control
  • Under BD service contract since installed in 2012

 

Performance

Fluorescence Sensitivity

  • Measurements performed at 70 psi and 90 kHz using SPHERO Rainbow Calibration Particles (RCP-30-5A)
  • FITC: 125 molecules of equivalent soluble fluorochrome (MESF-FITC)
  • PE: 125 molecules of equivalent soluble fluorochrome (MESF-PE)

Fluorescence Resolution

  • Coefficient of variation (CV)
  • PI: Area, <3.0%, full G0/G1 peak for propidium iodide (PI)-stained chicken erythrocyte nuclei (CEN)
  • Hoechst: Area, <3.5%, full G0/G1 peak for Hoechst-stained CEN

Fluorescence Linearity

  • Doublet/singlet ratio:
  • CEN stained with PI: 1.95–2.05 (off the 488-nm laser) or Hoechst: 1.95–2.05 (off the 405-nm laser)

Forward and Side Scatter Sensitivity

  • Sensitivity enables separation of fixed platelets from noise, identification of bacteria, and detection of 0.5-micron beads.

Forward and Side Scatter Resolution

  • Scatter performance is optimized for resolving lymphocytes, monocytes, and granulocytes.

Sample Acquisition Rate

  • Maximum acquisition rate (events per second) with 12 compensation pairs and 8 parameters: 70,000.
Learn More
Becton-Dickinson-FacsAria-IIu----4-Lasers-Cell-Sorter-19571
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Ohaus FC5714 *NEW* Benchtop Centrifuge

Ohaus FC5714 *NEW* Benchtop Centrifuge

Cambridge ID #: 20274

Features:

Frontier 5000 Multi Pro Centrifuges are designed for universal use in research, industrial & clinical laboratories, and can be combined with our rotors & accessories for customized use in specific applications. Available in 5 models with capacities from low microliter to 6x250 ml, and featuring high-speed performance at maximum volume, automatic rotor identification and safety features - these multi-purpose centrifuges are a must for any lab.

Applications

Centrifugal Separation, General Sample Preparation, Cell Pelleting, Protein Separation, Nucleic Acid Separation, Cell Concentrating, Chemical Separation, Diagnostics, Environmental Sample Preparation, Blood Sample Processing

Display

Backlit Liquid Crystal Display (LCD)

Operation

Designed to be used with a variety of rotors and accessories

Communication

N/A

Construction

Corrosion-resistant stainless steel chamber with Polycarbonate/ABS plastic lid

Design Features

Ten acceleration & deceleration rates, selection of running time from 10s to 99h 59min or continuous, quick spin, CFC-free refrigeration system, sample temp. indication (refrigerated models), lid-locking system, over-speed protection, dual imbalance sensing

 

Specifications:

 

 

  • Speed Range:200 rpm – 14,000 rpm
  • Maximum Relative Centrifuge Force (x g):18624 g
  • Maximum Capacity (Rotor):4x100 ml
  • Acceleration Gear:10
  • Deceleration Gear:10
  • Dimensions (HxLxW):12.99 in x 19.41 in x 14.25 in (330 mm x 493 mm x 362 mm)
  • Display: LCD with backlight
  • Net Weight:66 lb (30 kg)
  • Noise Level≤63±2 dB(A)
  • Power Consumption: 520 WRefrigeration Range:-4 °F – 104 °F (-20 °C – 40 °C)

 

 

  • Rotor Recognition Method: Auto
  • Running Time: Quickspin;  10 sec to 99 h 59 min 59 sec;  Continous
  • Safety Certification: CE;  FCC

 

  • Working Environment:36°F – 95°F, 80%RH, non-condensing (2°C – 35°C, 80%RH, non-condensing)

 

Learn More
Ohaus-FC5714-*NEW*-Benchtop-Centrifuge-20274
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Ohaus FC5718 *NEW* Benchtop Centrifuge

Ohaus FC5718 *NEW* Benchtop Centrifuge

Cambridge ID #: 20270

Features:

Frontier 5000 Multi Pro Centrifuges are designed for universal use in research, industrial & clinical laboratories, and can be combined with our rotors & accessories for customized use in specific applications. Available in 5 models with capacities from low microliter to 6x250 ml, and featuring high-speed performance at maximum volume, automatic rotor identification and safety features - these multi-purpose centrifuges are a must for any lab.

Applications

Centrifugal Separation, General Sample Preparation, Cell Pelleting, Protein Separation, Nucleic Acid Separation, Cell Concentrating, Chemical Separation, Diagnostics, Environmental Sample Preparation, Blood Sample Processing

Display

Backlit Liquid Crystal Display (LCD)

Operation

Designed to be used with a variety of rotors and accessories

Communication

N/A

Construction

Corrosion-resistant stainless steel chamber with Polycarbonate/ABS plastic lid

Design Features

Ten acceleration & deceleration rates, selection of running time from 10s to 99h 59min or continuous, quick spin, CFC-free refrigeration system, sample temp. indication (refrigerated models), lid-locking system, over-speed protection, dual imbalance sensing

 

Specifications:

 

 

  • Speed Range:200 rpm – 18,000 rpm
  • Maximum Relative Centrifuge Force (x g):23,542 g
  • Maximum Capacity (Rotor):4 x 100 ml
  • Acceleration Gear:10
  • Deceleration Gear:10
  • Dimensions (HxLxW):13.82 in x 19.65 in x 16.06 in (351 mm x 499 mm x 408 mm)
  • Display: LCD with backlight
  • Net Weight:95 lb (43 kg)
  • Noise Level:≤60±2 dB(A)
  • Power Consumption: 475 W
  • Rotor Recognition Method: Auto
  • Running Time: Quickspin;  10 sec to 99 h 59 min 59 sec;  Continous
  • Safety Certification: CE;  FCC
  • Working Environment:36°F – 95°F, 80%RH, non-condensing (2°C – 35°C, 80%RH, non-condensing)

 

 

Learn More
Ohaus-FC5718-*NEW*-Benchtop-Centrifuge-20270
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Ohaus FC5718R *NEW* Benchtop Refrigerated Centrifuge

Ohaus FC5718R *NEW* Benchtop Refrigerated Centrifuge

Cambridge ID #: 20271

Features:

Frontier 5000 Multi Pro Centrifuges are designed for universal use in research, industrial & clinical laboratories, and can be combined with our rotors & accessories for customized use in specific applications. Available in 5 models with capacities from low microliter to 6x250 ml, and featuring high-speed performance at maximum volume, automatic rotor identification and safety features - these multi-purpose centrifuges are a must for any lab.

Applications

Centrifugal Separation, General Sample Preparation, Cell Pelleting, Protein Separation, Nucleic Acid Separation, Cell Concentrating, Chemical Separation, Diagnostics, Environmental Sample Preparation, Blood Sample Processing

Display

Backlit Liquid Crystal Display (LCD)

Operation

Designed to be used with a variety of rotors and accessories

Communication

N/A

Construction

Corrosion-resistant stainless steel chamber with Polycarbonate/ABS plastic lid

Features:

Frontier 5000 Multi Pro Centrifuges are designed for universal use in research, industrial & clinical laboratories, and can be combined with our rotors & accessories for customized use in specific applications. Available in 5 models with capacities from low microliter to 6x250 ml, and featuring high-speed performance at maximum volume, automatic rotor identification and safety features - these multi-purpose centrifuges are a must for any lab.

Applications

Centrifugal Separation, General Sample Preparation, Cell Pelleting, Protein Separation, Nucleic Acid Separation, Cell Concentrating, Chemical Separation, Diagnostics, Environmental Sample Preparation, Blood Sample Processing

Display

Backlit Liquid Crystal Display (LCD)

Operation

Designed to be used with a variety of rotors and accessories

Communication

N/A

Construction

Corrosion-resistant stainless steel chamber with Polycarbonate/ABS plastic lid

Design Features

Ten acceleration & deceleration rates, selection of running time from 10s to 99h 59min or continuous, quick spin, CFC-free refrigeration system, sample temp. indication (refrigerated models), lid-locking system, over-speed protection, dual imbalance sensing

 

Specifications:

 

 

  • Speed Range:200 rpm – 18,000 rpm
  • Maximum Relative Centrifuge Force (x g):23,542 g
  • Maximum Capacity (Rotor):4 x 100 mlRefrigeration Range: -4 °F – 104 °F (-20 °C – 40 °C)

 

 

  • Acceleration Gear:10
  • Deceleration Gear:10
  • Dimensions (HxLxW):14.13 in x 28.78 in x 16.02 in (359 mm x 731 mm x 407 mm)
  • Display: LCD with backlight
  • Net Weight:95 lb (43 kg)
  • Noise Level:≤60±2 dB(A)
  • Power Consumption: 475 W
  • Rotor Recognition Method: Auto
  • Running Time: Quickspin;  10 sec to 99 h 59 min 59 sec;  Continous
  • Safety Certification: CE;  FCC

 

  • Working Environment:36°F – 95°F, 80%RH, non-condensing (2°C – 35°C, 80%RH, non-condensing)
Learn More
Ohaus-FC5718R-*NEW*-Benchtop-Refrigerated-Centrifuge-20271
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Ohaus FC5816R *NEW* Benchtop Refrigerated Centrifuge

Ohaus FC5816R *NEW* Benchtop Refrigerated Centrifuge

Cambridge ID #: 20273

Features:

Frontier 5000 Multi Pro Centrifuges are designed for universal use in research, industrial & clinical laboratories, and can be combined with our rotors & accessories for customized use in specific applications. Available in 5 models with capacities from low microliter to 6x250 ml, and featuring high-speed performance at maximum volume, automatic rotor identification and safety features - these multi-purpose centrifuges are a must for any lab.

Applications

Centrifugal Separation, General Sample Preparation, Cell Pelleting, Protein Separation, Nucleic Acid Separation, Cell Concentrating, Chemical Separation, Diagnostics, Environmental Sample Preparation, Blood Sample Processing

Display

Backlit Liquid Crystal Display (LCD)

Operation

Designed to be used with a variety of rotors and accessories

Communication

N/A

Construction

Corrosion-resistant stainless steel chamber with Polycarbonate/ABS plastic lid

Design Features

Ten acceleration & deceleration rates, selection of running time from 10s to 99h 59min or continuous, quick spin, CFC-free refrigeration system, sample temp. indication (refrigerated models), lid-locking system, over-speed protection, dual imbalance sensing

 

Specifications:

 

 

  • Speed Range:200 rpm – 16,000 rpm
  • Maximum Relative Centrifuge Force (x g):24325 g
  • Maximum Capacity (Rotor):6x250 ml
  • Acceleration Gear:10
  • Deceleration Gear:10
  • Dimensions (HxLxW):13.94 in x 21.18 in x 17.56 in (354 mm x 538 mm x 446 mm)
  • Display: LCD with backlight
  • Net Weight:115 lb (52 kg)
  • Noise Level:≤61±2 dB(A)
  • Power Consumption: 520 WRefrigeration Range:-4 °F – 104 °F (-20 °C – 40 °C)

 

 

  • Rotor Recognition Method: Auto
  • Running Time: Quickspin;  10 sec to 99 h 59 min 59 sec;  Continous
  • Safety Certification: CE;  FCC
  • Working Environment:36°F – 95°F, 80%RH, non-condensing (2°C – 35°C, 80%RH, non-condensing)

 

 

Learn More
Ohaus-FC5816R-*NEW*-Benchtop-Refrigerated-Centrifuge-20273
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
 HC-H090 *NEW* Image Coming Soon

HC-H090 *NEW*

Cambridge ID #: 22798

Features:

  • Horizontal air stream producing clean air in compliance with ISO5/ CLASS100 or ISO4/Class10 standards (depending on the filter installed).
  • Massive epoxy coated, oven-tempered metal structure assures stability, preventing movement during sensitive operations.
  • Work surface made of 304 stainless steel
  • Side windows made of tempered glass
  • High efficiency quiet EC fan
  • Optional stand
  • Universal electrical outlet
  • Innovative, advanced design
  • Variety of sizes and materials; optional stand
  • Eco-friendly, cost-effective LED lighting
  • Compliance with Test Standard: US Federal Standard 209E / ISO-14644-1 / CE

Outer Dimensions W x D x H:

  • 900 x 890 x 1250
    mm
    40.5 x 35 x 49.2

Workspace (W x D x H):

  • 770 x 610 x 640 mm
    30.3 x 24 x 25.2”
Learn More
-HC-H090-*NEW*--22798
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping