Used Lab Equipment

Features:

Non-Metallic Transfer Pump

Specifications:

• Max Flow Rate (GPM): 14

• Max Flow Rate (LPM): 53

• Suction Lift Wet (in Hâ‚‚O): 120

• Suction Lift Wet (mm of Hâ‚‚O): 3100

• Suction Lift Wet (in Hg): 8.8

• Suction Lift Wet (mm Hg): 537

• Air Consumption (SCFM): 16

• Air Consumption (m³/hr): 27.2

• Max Air Inlet Pressure (PSI): 100

• Max Air Inlet Pressure (bar): 6.9

• Particulates, Max size dia (in): 0.125

• Max Particulates Size Diameter (cm): 3.2

• Max Temperature (° F): 150

• Max Temperature (° C): 66

• Viscosity, Max (cP): 11000

• Length (in): 10.125

• Height (in): 7.0625

• Width (in): 11.3125

• Length (cm): 25.72

• Height (cm): 17.94

• Width (cm): 28.73

PuriCare Open Access Station (transfer station)

Features

• Generous work surface area to accommodate standard rodent cages
• Electric hydraulic lift for infinite height adjustment from 36.5" to 47" with the push of a button
• Recessed and angled sashes for closer viewing without glare
• Large 14" high sash openings to accommodate various cage sizes with brakes
• Large 5" diameter, non-marking polyurethane casters
• Two 99.99% efficient HEPA filters to trap allergens
• Nominal downflow velocity of 55 fpm.
• Economical, disposable upper and lower prefilters
• Variable speed motor/blower and impellers
• Particulate-free ISO Class 5 (formerly Class 100) air
• Retractable, safety orange, top right-side mounted power cord, 28' (9 m) on 115 volt model
• Two push/pull bars on the right hand side to facilitate transport
• Two 32-watt fluorescent lights
• Two easy-to-read, ADA-compliant Minihelic pressure gauges
• ADA-compliant light and blower switches
• ADA-compliant electrical duplex
• Single pass airflow design with no recirculation through the enclosure helps prevent heat stress and odor build up.
• Type 304 stainless steel dished work surface
• Exterior is durable glacier white and slate gray epoxy-coated steel
• Full three year warranty on parts and labor
• ETL listed (115 volt models)
• CE Conformity Mark (230 volt models)

Description:

In the 10050 Series of Bulk Powder Chemical Transfer Stations, the HEPA filtration system is housed on top of the acrylic enclosure. This filtering configuration provides maximum containment while minimizing space and energy demands. The turbulence free airflow provides a stable working environment that prevents balance fluctuations. The base of the unit is roomy enough for larger balances and comes with a standard 20” (50.8 cm) diameter cutout in the base to accommodate a large drum. Multiple filtering options are available including HEPA with 99.99% efficiency. Each system comes equipped with a face velocity alarm to continuously monitor airflow.

Specifications:

• Dimensions (W x D x H): 59.75” x 30” x 30” (151.8 x 76.2 x 76.2 cm)
• Weight: 305 lbs. (138.4 kg)

Features and Benefits

• Transfers take place in as little as 15–60 min
• Minimal buffer requirements save money
• Capacity to transfer up to four Mini-PROTEAN precast or handcast gels, or three Criterion gels
• Single-step locking system allows simple, speedy setup
• Platinum-coated titanium anode plate electrodes and stainless-steel cathode plate electrodes provide consistent and reliable transfers, durability, and long life
• Extra plastic templates required by other semi-dry blotters to prevent electrode short circuits are unnecessary
• Safety cover breaks the electrical current when lifted, preventing electrical shock

Applications and Uses

• Western blotting
• Nucleic acid transfer
• Northern and Southern blot transfers in 10–35 min
• Transfer of DNA and RNA using the unique agarose gel semi-dry blotting support frame

Features:

• Maximum gel size (W x L), cm: 24 x 16
• Buffer requirement, ml: 200
• Gel capacity: 4 Mini-PROTEAN precast or handcast gels, 3 Criterion gels, 1–3 PROTEAN II gel sandwiches
• Recommended power supply: PowerPac HC (High Current)
• Dimensions (W x L x H), cm: 37 x 24 x 11
• Weight, kg/lb: 3.6/7.9

Features and Benefits

• Transfers take place in as little as 15–60 min
• Minimal buffer requirements save money
• Capacity to transfer up to four Mini-PROTEAN precast or handcast gels, or three Criterion gels
• Single-step locking system allows simple, speedy setup
• Platinum-coated titanium anode plate electrodes and stainless-steel cathode plate electrodes provide consistent and reliable transfers, durability, and long life
• Extra plastic templates required by other semi-dry blotters to prevent electrode short circuits are unnecessary
• Safety cover breaks the electrical current when lifted, preventing electrical shock

Applications and Uses

• Western blotting
• Nucleic acid transfer
• Northern and Southern blot transfers in 10–35 min
• Transfer of DNA and RNA using the unique agarose gel semi-dry blotting support frame

Features:

• Maximum gel size (W x L), cm: 24 x 16
• Buffer requirement, ml: 200
• Gel capacity: 4 Mini-PROTEAN precast or handcast gels, 3 Criterion gels, 1–3 PROTEAN II gel sandwiches
• Recommended power supply: PowerPac HC (High Current)
• Dimensions (W x L x H), cm: 37 x 24 x 11
• Weight, kg/lb: 3.6/7.9

Specifications:

• Flow rate range: 1 to 5000 μL/min
• Backpressure range 0 to 600 bar (8702 psi)
• Residual pulsation < 2 bar Amplitude
• Flow rate accuracy ±0.5% or 1 μL/min, whichever is greater
• Gradient composition accuracy ±0.5% absolute
• Gradient resolution 1% from 0 to 100%
• Firmware version (November 2010) 23.67 e
• Gradient composition range 0 to 100% from up to 4 independent feed channels employing 2 of them at the same time
• Delay volume 90 μL (LDA) + 65 μL (static mixer)

The Fisher Scientific Dry Bath Incubators offer exceptional temperature control and uniformity in addition to a powder coated steel body to provide durability for demanding applications.

Specifications:

• Temperature Range: 5 - 130 °C
• Temperature Stability: +/-1.5 °C
• Temperature Uniformity: +/-0.5 °C
• Power Requirements: 120V, 50/60Hz

Features:

Vacuum Pump

Specifications:

• RPM：1725/1425

• SF：1.0

• V： 115/208-230

• H/P： ¾

• FLA: 10.6/5.3

The HP / Agilent 1100 HPLC series is the current model and arguably the best design in the industry because of the optimized design of the quaternary pump ensuring virtually pulse-free and stable solvent flow, with dual floating pistons in series, precisely servo-controlled. This design with variable stroke volume allows pulse-free solvent delivery and efficient mixing. An inlet-valve electronically activated and synchronized to piston stroke - eliminates vapor formation with volatile solvents and is maintenance free. With high-speed proportioning valve and pre-configured vacuum degasser, for convenient low-pressure mixing of up to four solvents and highest flexibility in solvent choices.

 Features:

• Ease-of-use - handheld control module lets you enter operating parameters fast, store methods easily and display pressure profile, diagnostics and task-oriented information.
• Durable - stainless steel, titanium, gold, ruby, sapphire, ceramics, PEEK and PTFE ensure long lifetime. Seal wash option for high salt mobile phases keeps maintenance to a minimum for lower operation costs.
• Wide flow range - up to 10 ml/min for broad HPLC work, including semi-preparative separations.
• Better for GLP - built-in leak and pressure test with graphical presentation of pressure profiles, and early maintenance feedback.

Specifications:

• Hydraulic system: Dual piston in series pump with proprietary servo-controlled variable stroke drive, floating pistons and active inlet valve
• Settable flow range: .001– 10 ml/min, in 0.001 ml/min increments
• Flow range: 2 – 10.0 ml/min
• Recommended pH range: – 12.5, solvents with pH > 2.3 should not contain acids which attack stainless steel.
• Operating voltage: 230V

The G1311A is an optimized design ensuring virtually pulse-free and stable solvent flow with dual floating pistions.  An inlet valve electronically activated and synchronized to piston stroke eliminates vapor formation with volatile solvents and is maintenance free.  Instrument comes equipped with four solvent inlets with built-in gradient control. 

Specifications:

• Configurable Flow Range: 0.001 – 10ml/min – in 0.001ml/min increments
• Flow Range: 0.2 – 10.0 ml/min
• Recommended pH Range: 1.0 – 12.5, solvents with pH > 2.3 should not contain acids which attack stainless steel
• Gradient Formation: Low pressure quaternary mixing/gradient capability using proprietary high-speed proportioning valve. Delay volume 800-1100µl, depending on back pressure

The G1311A is an optimized design ensuring virtually pulse-free and stable solvent flow with dual floating pistions.  An inlet valve electronically activated and synchronized to piston stroke eliminates vapor formation with volatile solvents and is maintenance free.  Instrument comes equipped with four solvent inlets with built-in gradient control. 

Specifications:

• Configurable Flow Range: 0.001 – 10ml/min – in 0.001ml/min increments
• Flow Range: 0.2 – 10.0 ml/min
• Recommended pH Range: 1.0 – 12.5, solvents with pH > 2.3 should not contain acids which attack stainless steel
• Gradient Formation: Low pressure quaternary mixing/gradient capability using proprietary high-speed proportioning valve. Delay volume 800-1100µl, depending on back pressure

Specifications:

• Hydraulic system: Two dual piston in series pumps with proprietary servo-controlled variable stroke drive, floating piston design and active inlet valve
• Setable flow range: Setpoints 0.001 - 5 ml/min, in 0.001 ml/min increments
• Flow range 1 - 5.0 ml/min
• Flow precision: < 0.3 % RSD (typically 0.15 %), based on retention time, at 1 ml/min
• Pressure: Operating range 0 400 bar (0 - 5880 psi) up to 5 ml/min
• Pressure pulsation: < 2 %amplitude (typically < 1 %), at 1 ml/min isopropanol, at all pressures > 1 MPa
• Compressibility compensation: User-selectable, based on mobile phase compressibility
• Recommended pH range: 0 - 12.5, solvents with pH < 2.3 should not contain acids which attack stainless steel
• Gradient formation: High-pressure binary mixing, delay volume 180 - 480 μl without mixer, 600 - 900 μl with mixer, dependent on back pressure
• Composition range 1- 99 % or 5 μl/min per channel, whatever is greater
• Composition precision < 0.2 % SD, at 0.1 and 1 ml/min
• Control and data evaluation Agilent ChemStation for LC Control and data evaluation

Can be sold as an individual component or as part of a complete stack

Specifications:

• Hydraulic system: Two dual piston in series pumps with proprietary servo-controlled variable stroke drive, floating piston design and active inlet valve
• Setable flow range: Setpoints 0.001 - 5 ml/min, in 0.001 ml/min increments
• Flow range 1 - 5.0 ml/min
• Flow precision: < 0.3 % RSD (typically 0.15 %), based on retention time, at 1 ml/min
• Pressure: Operating range 0 400 bar (0 - 5880 psi) up to 5 ml/min
• Pressure pulsation: < 2 %amplitude (typically < 1 %), at 1 ml/min isopropanol, at all pressures > 1 MPa
• Compressibility compensation: User-selectable, based on mobile phase compressibility
• Recommended pH range: 0 - 12.5, solvents with pH < 2.3 should not contain acids which attack stainless steel
• Gradient formation: High-pressure binary mixing, delay volume 180 - 480 μl without mixer, 600 - 900 μl with mixer, dependent on back pressure
• Composition range 1- 99 % or 5 μl/min per channel, whatever is greater
• Composition precision < 0.2 % SD, at 0.1 and 1 ml/min
• Control and data evaluation Agilent ChemStation for LC Control and data evaluation

Can be sold as an individual component or as part of a complete stack

Features:

• Extended flow rate range
• Without changing pump heads, provides flow rates up to 100 mL/min at 400 bar
• For preparative and analytical applications with low flow rates (0.5 mL/min, upward), provides precise high-pressure binary gradient formation with low delay volume (700 uL)
• Automated seal wash using a peristaltic pump extends seal lifetime
• Pumps stop in response to column blockage or leaks
• Automated electromagnetic purge valve simplifies system setup
• Software provides solvent level control that keeps the pump from running dry

Can be sold as an individual component or as part of a complete stack

Specifications:

• Hydraulic system: Two dual piston in series, with proprietary servo-controlled variable stroke drive, floating piston, active inlet valve, solvent selection valve and electronic flow control for flow rates up to 100 µl/min
• Settable column flow Range:
  • – 20 µl/min
  • – 100 µl/min (with the extended flow range kit)
  • – 2.5 µl/min (with the electronic flow control bypassed)
• Recommended column flow range:
  • – 20 µl/min
  • 10 – 100 µl/min (with extended flow range kit)
  • – 2.5 ml/min (with the electronic flow sensor bypassed)
• Column flow precision: < 0.7 % RSD or 0.03 % SD (typically 0.4 % RSD or 0.02 % SD), at 10 µl/min and 50 µl/min column flow (based on RT, default setting)
• Optimum composition Range: 1 to 99% or 5 µl/min per channel (primary flow), whatever is greater
• Composition precision: < 0.2 % SD, at 10 µl/min (20 µl flow sensor), 50 µl/min (100 µl flow sensor) and 1 ml/min (normal mode) default setting
• Delay volume:
  • Typically 3 µl from the electronic flow control to the pump outlet for flow rates up to 20 µl/min.
  • Typically 12 µl from the electronic flow control to the pump outlet for flow rates up to 100 µl.
  • for flow rates up to 100 µl/min and electronic flow control active:
  • primary flow path 180 - 480 µl without mixer, 600 - 900 µl with mixer (system pressure dependent)
  • Typically 180 to 480 µl (system pressure dependent) without mixer for flow rates up to 2.5 ml/min. (Mixer delay volume 420 µl)
• Pressure range: 20 to 400 bar (5880psi) system pressure
• Compressibility Compensation: User-selectable, based on mobile phase compressibility
• Recommended pH Range: 0 – 8.5, solvents with pH < 2.3 should not contain acids which attack stainless steel. Upper pH range is limited by fused silica capillaries.
• Control and data Evaluation: Agilent ChemStation for LC
• Analog output For pressure monitoring, 2 mV/bar, one output
• Communications: Controller-area network (CAN), GPIB, RS-232C, APG Remote: ready, start, stop and shut-down signals, LAN optional
• Safety and maintenance: Extensive diagnostics, error detection and display (through control module and Agilent ChemStation), leak detection, safe leak handling, leak output signal for shutdown of pumping system. Low voltages in major maintenance areas.
• GLP features: Early maintenance feedback (EMF) for continuous tracking of instrument usage in terms of seal wear and volume of pumped mobile phase with user-settable limits and feedback messages. Electronic records of maintenance and errors.
• Housing: All materials recyclable