Used Lab Equipment

PuriCare Open Access Station (transfer station)

Features

• Generous work surface area to accommodate standard rodent cages
• Electric hydraulic lift for infinite height adjustment from 36.5" to 47" with the push of a button
• Recessed and angled sashes for closer viewing without glare
• Large 14" high sash openings to accommodate various cage sizes with brakes
• Large 5" diameter, non-marking polyurethane casters
• Two 99.99% efficient HEPA filters to trap allergens
• Nominal downflow velocity of 55 fpm.
• Economical, disposable upper and lower prefilters
• Variable speed motor/blower and impellers
• Particulate-free ISO Class 5 (formerly Class 100) air
• Retractable, safety orange, top right-side mounted power cord, 28' (9 m) on 115 volt model
• Two push/pull bars on the right hand side to facilitate transport
• Two 32-watt fluorescent lights
• Two easy-to-read, ADA-compliant Minihelic pressure gauges
• ADA-compliant light and blower switches
• ADA-compliant electrical duplex
• Single pass airflow design with no recirculation through the enclosure helps prevent heat stress and odor build up.
• Type 304 stainless steel dished work surface
• Exterior is durable glacier white and slate gray epoxy-coated steel
• Full three year warranty on parts and labor
• ETL listed (115 volt models)
• CE Conformity Mark (230 volt models)

Description:

In the 10050 Series of Bulk Powder Chemical Transfer Stations, the HEPA filtration system is housed on top of the acrylic enclosure. This filtering configuration provides maximum containment while minimizing space and energy demands. The turbulence free airflow provides a stable working environment that prevents balance fluctuations. The base of the unit is roomy enough for larger balances and comes with a standard 20” (50.8 cm) diameter cutout in the base to accommodate a large drum. Multiple filtering options are available including HEPA with 99.99% efficiency. Each system comes equipped with a face velocity alarm to continuously monitor airflow.

Specifications:

• Dimensions (W x D x H): 59.75” x 30” x 30” (151.8 x 76.2 x 76.2 cm)
• Weight: 305 lbs. (138.4 kg)

Features:

Non-Metallic Transfer Pump

Specifications:

• Max Flow Rate (GPM): 14

• Max Flow Rate (LPM): 53

• Suction Lift Wet (in Hâ‚‚O): 120

• Suction Lift Wet (mm of Hâ‚‚O): 3100

• Suction Lift Wet (in Hg): 8.8

• Suction Lift Wet (mm Hg): 537

• Air Consumption (SCFM): 16

• Air Consumption (m³/hr): 27.2

• Max Air Inlet Pressure (PSI): 100

• Max Air Inlet Pressure (bar): 6.9

• Particulates, Max size dia (in): 0.125

• Max Particulates Size Diameter (cm): 3.2

• Max Temperature (° F): 150

• Max Temperature (° C): 66

• Viscosity, Max (cP): 11000

• Length (in): 10.125

• Height (in): 7.0625

• Width (in): 11.3125

• Length (cm): 25.72

• Height (cm): 17.94

• Width (cm): 28.73

Features and Benefits

• Transfers take place in as little as 15–60 min
• Minimal buffer requirements save money
• Capacity to transfer up to four Mini-PROTEAN precast or handcast gels, or three Criterion gels
• Single-step locking system allows simple, speedy setup
• Platinum-coated titanium anode plate electrodes and stainless-steel cathode plate electrodes provide consistent and reliable transfers, durability, and long life
• Extra plastic templates required by other semi-dry blotters to prevent electrode short circuits are unnecessary
• Safety cover breaks the electrical current when lifted, preventing electrical shock

Applications and Uses

• Western blotting
• Nucleic acid transfer
• Northern and Southern blot transfers in 10–35 min
• Transfer of DNA and RNA using the unique agarose gel semi-dry blotting support frame

Features:

• Maximum gel size (W x L), cm: 24 x 16
• Buffer requirement, ml: 200
• Gel capacity: 4 Mini-PROTEAN precast or handcast gels, 3 Criterion gels, 1–3 PROTEAN II gel sandwiches
• Recommended power supply: PowerPac HC (High Current)
• Dimensions (W x L x H), cm: 37 x 24 x 11
• Weight, kg/lb: 3.6/7.9

Features and Benefits

• Transfers take place in as little as 15–60 min
• Minimal buffer requirements save money
• Capacity to transfer up to four Mini-PROTEAN precast or handcast gels, or three Criterion gels
• Single-step locking system allows simple, speedy setup
• Platinum-coated titanium anode plate electrodes and stainless-steel cathode plate electrodes provide consistent and reliable transfers, durability, and long life
• Extra plastic templates required by other semi-dry blotters to prevent electrode short circuits are unnecessary
• Safety cover breaks the electrical current when lifted, preventing electrical shock

Applications and Uses

• Western blotting
• Nucleic acid transfer
• Northern and Southern blot transfers in 10–35 min
• Transfer of DNA and RNA using the unique agarose gel semi-dry blotting support frame

Features:

• Maximum gel size (W x L), cm: 24 x 16
• Buffer requirement, ml: 200
• Gel capacity: 4 Mini-PROTEAN precast or handcast gels, 3 Criterion gels, 1–3 PROTEAN II gel sandwiches
• Recommended power supply: PowerPac HC (High Current)
• Dimensions (W x L x H), cm: 37 x 24 x 11
• Weight, kg/lb: 3.6/7.9

Features:

The QIAgility is a compact benchtop instrument that enables rapid, high-precision setup of PCR experiments with ready-to-use software for ease and convenience. The software provides step-by-step guidance for worktable setup and automatic calculation of all mixes, eliminating the need to program pipetting steps. Just select the kit and cycler, define your targets and start the run. For added flexibility the QIAgility is operated via a laptop computer.

Specifications:

• Communications: USB and RS232

• Conductive Filtered Tips: 50 µl and 200 µl Conductive Filtered Tips for liquid-level sensing

• Consumables (supplied): 10 racks of 50 µl Conductive Filtered Tips (960); 10 racks of 200 µl Conductive Filtered Tips (960); 25 x 5 ml tubes; 100 x 0.2 µl PCR tubes; 3 Tip Disposal Boxes

• Dimensions Height: 45 cm (18 in.), instrument lid closed; Height: 86 cm (34 in.), instrument lid open; Width: 54 cm (21 in.); Depth: 63 cm (25 in.), without cables

• Electrical: 100–240 V AC, 250 VA, 50–60 Hz

• HEPA filter: Preinstalled dual-cartridge 3M Air-Mate HEPA (High Efficiency Particulate Air) filter system provides positive pressure clean air within the closed hood.

• Humidity: Operating humidity: 40–70%

• Liquid-level sensing: Minimum detection volume (10 µl in 200 µl PCR tubes). Only functional in combination with QIAGEN Conductive Filtered Tips.

• Notebook (supplied): QIAgility comes with a notebook computer for added flexibility.

• Pipetting head: Single channel

• Place of operation: For indoor use only

• Pollution level: 2

• Precision: CV <1%, 5–200 µl (dry-well transfer) CV <5%, 2–5 µl (wet-well transfer) CV <10%, 1 µl

• Software: Supplied with unlimited user license. Free upgrades by Web download.

• Table capacity: 6 x SBS positions (127.76 x 85.48 mm) for adapters and Tip Rack Holders 1 x Master Mix Block 1x Reagent Block

• Temperature: Operating temperature, 15–30 °C (59–86°F)

• Tip disposal: All used tips ejected externally — no waste accumulation on the worktable

• Tip volume: 1–200 µl

Description:

Your Fisher hotplate, stirrer and stirring hotplate are general purpose heating and/or stirring devices intended for general laboratory procedures. Three sizes are available, referring to the size of the top plate in inches: 4x4, 7x7, and 10x10. All three sizes are available as a hotplate, stirrer, or combination stirring hotplate. In addition, all three are available with a ceramic top plate. The 7x7 size is also available with an aluminum top plate. The catalog numbers above refer to the units that are available. A vessel with a flat bottom is recommended on the hotplate and stirring hotplate for ideal heat transfer. Glass containers should be made of heat resistant glass such as borosilicate. Avoid soda lime glass containers, metal containers, sandbaths, or vessels with a rim around the bottom as these could cause damage to the hot plate and stirring hot plate.

Specifications:

• 7x7 ceramic top models
• 150°C (302°F) - 540°C (1004°F)
• 100 - 1000 RPM

The Agilent 1290 Infinity Binary LC is not only the most powerful but also the most adaptive UHPLC system available. No matter what your laboratory requires, the 1290 Infinity Binary LC can handle the widest range of applications; UHPLC methods, legacy HPLC methods, HPLC-to-UHPLC method transfer, method development, multi-compound screening, LC/MS coupling, and many more.

Features:

• Most adaptive  – emulates other HPLC and UPLC systems, connects to all Agilent and many non-Agilent software
• Highest performance & flexibility – by any measure
• HPLC-like service costs – UHPLC productivity

Includes:

• G1316C TTC Column Compartment
• G4226A Autosampler
• G1330B Autosampler Thermostat
• G4220A Binary pump
• Tray
• 1200 Instant Pilot

Includes:

• Agilent 6890 Plus Gas Chromatograph
• 7683 100 Vial Autosampler with Injector Tower

• Agilent 5973
• Edwards RV3 Vacuum Pump
• Computer Loaded with Chemstation Software
• Monitor

Specifications:

Mass Spectrometer:  

• Mode (standard): EI
• Modes (optional): PCI, NCI EI with CI source
• Ion source type: 5 - 241.5 eV
• Ionization energy: 0 - 315 uA
• Ionization current: 100 - 350 'C
• Transfer line temperature: 150 - 300 'C
• Quadrupole temperature: 150 - 200 'C
• Mass filter: Monolithic hyperbolic quadrupole
• Mass filter protection: Entrance lens
• Mass range:6 - 800 amu
• Mass resolution: Unit mass adjustable by tune
• Mass axis stability: Better than 0.10 amu/ 48 h
• Detector: EM with replacement horn
• Dynamic range (electronic): 10e6
• Scan rate (electronic): 10,000 amu/s
• Write-to-disk: 8,000 amu/s
• SIM: 30 ions x 50 groups
• Pumping system: Turbomolecular pump
• Total flow: 2 mL/min (standard turbo)

Gas Chromatograph: 

• Automatic injector (optional): Automatic alignment, fast injection
• Liner replacement: Compatible with optional flip-top inlet sealing system
• Injector: Split-splitless (standard), others available
• Oven temperature: Ambient +4 - 450 'C
• Oven ramps / plateaus: 6-7
• Carrier gases: Helium, hydrogen, nitrogen, argon
• Electronic pnuematic control: Auto pressure regulation for split/splitless, septum purge
• Carrier gas control modes: Constant pressure and flow modes; pressure and flow programmable
• Pressure range: 0 - 100 psi (standard), 0 - 150 psi (optional) with 0.01 psi resolution, pressure and temperature corrected
• Retention-time locking:RTL ready
• Flow control: Compatible with optional microfluidics controller

Features:

• Glacier white, dry powder epoxy-coated aluminum construction.
• 3/16 in thick tempered safety glass sides.
• Air-mixing, epoxy-coated steel rear baffle.
• Two roughing pre-filters.
• Two 1.5 in diameter utility ports with plastic plugs.
• Gas-assisted filter clamping mechanism.
• Control panel with LCD for display of filter time elapsed; programmable timer for audio/visual alarm; ALARM/MUTE switch with LED indicator; SET FILTER TIME, UP/DOWN, and ENTER programming switches; and event timer.
• Built-in, non-sparking motor/blower.
• Pre-wired with two 20-watt fluorescent lights and switches for blower and light.
• Angled ¼ in thick tempered safety glass sash, adjustable to two operating height positions (13 in and 15 in to work surface), pivots to full open position (24.25 in) for cleaning and transfer of material.
• Face velocity of 100 fpm (236 CFM) when sash opening to work surface is 13 in and 80 fpm (236 CFM) when sash opening is 15 in.
• Air sampling syringe for test port.
• Shipped fully assembled.

Specifications:

• Power Requirements: 115 V, 60 Hz, 3 A

• Weight: 290 lbs

Features:

The La Petite Glove Box is comprised of essentially two components. The top and bottom are sealed using a revolutionary new gel used in the clean room industry. The unit is only two-thirds the size of the "Basic Glove Box", (818-GB).

Specifications:

• ID: 31.5 w x 25.5 d x 21.5"h, 80 x 65 x 55 cm
• OD: 49 w x 29 d x 22" h, 124,5 x 74 x 56 cm (widths include transfer chamber)
• Volume: 9.5 cu. Ft., 269 L
• Optically clear, one piece formed top is unbreakable.
• Bright white one piece bottom formed out of high temperature Noryl has "easy clean" corners.
• Gel Sealant.
• Stainless steel clamps have security locking features.
• Large access door (12" opening)
• Four ground key-cock valves for purging and gas entry.
• Adjustable Rh gauge.
• "Weathertite" duplex electrical outlet with safety covers.
• Transparent vacuum capable transfer chamber 12" long x 9.75" ID.
• White leveling plate for transferring liquids.
• All stainless steel clamps are adjustable.
• Vacuum gauge on transfer chambers.

Features:

Simple glove box used for general isolation and / or containment. Units are useful for isolating sensitive research studies from a hostile exterior environment. These economical units are compact, portable, lightweight and self-contained.

Specifications:

• Interior Dimensions: 41"w x 28"d x 26"h, 104 cm x 71cm x 66cm
• Exterior Dimensions: 55"w x 35"d x 27"h, 140 cm x 89 cm x 68.5 cm (Widths include transfer chamber)
• Volume: 200 pounds
• Optional vacuum pump: 800-PUMP
• Optically clear, one piece acrylic top.
• Matched die molded thermoset, bright white bottom (818-GB only).
• Coved, easy to clean corners with no hidden dark spots.
• Double layered, closed cellular neoprene gasketing system.
• Ambidextrous, white Hypalon gloves for superior chemical and U.V. resistance.
• Adjustable vacuum gauge on transfer chamber. Four ground key cock valves for purging.
• White leveling tray for transferring liquids through the transfer chamber.
• Stainless steel "0" rings for gloves.
• Transparent transfer chamber 12" long by 11" diameter (Interior Dimension).
• All clamps fully adjustable to compensate for wear.
• Hospital grade multiple electrical outlet strip U.L.-C.S.A. approved 110-120 volt U.S.A. (220-240 volt export).

Features:

This unit features cleanliness, safety, complete containment, portability, and a draft-free atmosphere. The Compact Glove Box is designed for use in hazardous situations where materials to be weighed must be contained. The chamber is ideal for determining the dry weight or moisture content of aqueous solutions, adhesives, cereals, toxic chemicals, pharmaceuticals, paper, plastics, and light radioactive materials. It minimizes product degradation caused by moisture absorption. The 830-ABB is beneficial when working with toxic substances, asbestos fibers, sewage residue, and harmful liquid vapors. For use with analytical balances, top loaders, bench scales and/or moisture analyzers. Four sizes available.

Specifications:

• Interior Dimensions: 35"w x 29" d x 30"h, 89cm x 74cm x 77cm
• External Dimensions: 49"w x 30"d x 31"h, 125cm x 77cm x 79cm (width includes transfer chamber)
• Volume: 17.6 cu. Ft., 498L
• Top section is removable for easy installation of equipment.
• Four purging gas valves (two on the transfer chamber and two on the main chamber).
• White leveling tray for easy transferring of liquids.
• All clamps stainless steel and completely adjustable.
• White ambidextrous Hypalon gloves for superior chemical and U.V. resistance.
• Hospital grade multiple electrical outlet strip U.L.-C.S.A. approved.
• Pressure relief valve minimizes glove "fight back".
• H.E.P.A. and organic vapor canister filters (replaceable).
• Transfer chamber is 12" long x 11" diameter (Interior Dimension).

Features:

This unit features cleanliness, safety, complete containment, portability, and a draft-free atmosphere. The Compact Glove Box is designed for use in hazardous situations where materials to be weighed must be contained. The chamber is ideal for determining the dry weight or moisture content of aqueous solutions, adhesives, cereals, toxic chemicals, pharmaceuticals, paper, plastics, and light radioactive materials. It minimizes product degradation caused by moisture absorption. The 830-ABB is beneficial when working with toxic substances, asbestos fibers, sewage residue, and harmful liquid vapors. For use with analytical balances, top loaders, bench scales and/or moisture analyzers. Four sizes available.

Specifications:

• Interior Dimensions: 35"w x 29" d x 30"h, 89cm x 74cm x 77cm
• External Dimensions: 49"w x 30"d x 31"h, 125cm x 77cm x 79cm (width includes transfer chamber)
• Volume: 17.6 cu. Ft., 498L
• Top section is removable for easy installation of equipment.
• Four purging gas valves (two on the transfer chamber and two on the main chamber).
• White leveling tray for easy transferring of liquids.
• All clamps stainless steel and completely adjustable.
• White ambidextrous Hypalon gloves for superior chemical and U.V. resistance.
• Hospital grade multiple electrical outlet strip U.L.-C.S.A. approved.
• Pressure relief valve minimizes glove "fight back".
• H.E.P.A. and organic vapor canister filters (replaceable).
• Transfer chamber is 12" long x 11" diameter (Interior Dimension).

Features:

This unit features cleanliness, safety, complete containment, portability, and a draft-free atmosphere. The Compact Glove Box is designed for use in hazardous situations where materials to be weighed must be contained. The chamber is ideal for determining the dry weight or moisture content of aqueous solutions, adhesives, cereals, toxic chemicals, pharmaceuticals, paper, plastics, and light radioactive materials. It minimizes product degradation caused by moisture absorption. The 830-ABC is beneficial when working with toxic substances, asbestos fibers, sewage residue, and harmful liquid vapors. For use with analytical balances, top loaders, bench scales and/or moisture analyzers. Four sizes available.

Specifications:

• Interior Dimensions: 28"w x 23"d x 29"h, 71cm x 59cm x 74cm
• External Dimensions: 43"w x 24"d x 31"h, 110cm x 61cm x 79cm (width includes transfer chamber)
• Volume: 11.2 cu. Ft., 317L
• Top section is removable for easy installation of equipment.
• Four purging gas valves (two on the transfer chamber and two on the main chamber).
• White leveling tray for easy transferring of liquids.
• All clamps stainless steel and completely adjustable.
• White ambidextrous Hypalon gloves for superior chemical and U.V. resistance.
• Hospital grade multiple electrical outlet strip U.L.-C.S.A. approved.
• Pressure relief valve minimizes glove "fight back".
• H.E.P.A. and organic vapor canister filters (replaceable).
• Transfer chamber is 12" long x 11" diameter (Interior Dimension).