Used Lab Equipment

Description:

The Parker NitroFlow TG2 is a self-contained gas generator that produces up to 80 lpm of pure LCMS grade gases. Designed for the AB Sciex 6500 series, zero air is produced at pressure above 110 psig for Gas1 and Gas2 needs. This combination of Parker technologies yield the highest performing, most reliable and most quiet integrated TriGas generation system available.

Specifications:

• Sound Level: <49 dB(A)
• Min/Max Ambient Temperature: 60°F/85°F (16°C/29°C)
• Electrical Requirements: 208-230 VAC, 60 Hz, 1 Phase, 16A
• Dimensions (H x W x D):  43” x 21” x 34” (109 x 53 x 86 cm)
• Weight 427 lbs. (194 kg)
• Hydrocarbon Free
• Phthalate Free

Specifications:

• Mode (standard): EI
• Modes (optional): PCI, NCI EI with CI source
• Ion source type: 5 - 241.5 eV
• Ionization energy: 0 - 315 uA
• Ionization current: 100 - 350 'C
• Transfer line temperature: 150 - 300 'C
• Quadrupole temperature: 150 - 200 'C
• Mass filter: Monolithic hyperbolic quadrupole
• Mass filter protection: Entrance lens
• Mass range:6 - 800 amu
• Mass resolution: Unit mass adjustable by tune
• Mass axis stability: Better than 0.10 amu/ 48 h
• Detector: EM with replacement horn
• Dynamic range (electronic): 10e6
• Scan rate (electronic): 10,000 amu/s
• Write-to-disk: 8,000 amu/s
• SIM: 30 ions x 50 groups
• Pumping system: Turbomolecular pump
• Total flow: 2 mL/min (standard turbo)

The Agilent/HP 6890N GC features electronic pneumatic control of all gas pressures and flows. On-board sensors automatically compensate for ambient temperature changes and barometric pressure differences to routinely achieve more accurate and reproducible results. EPC reduces re-calibration frequency and improves laboratory productivity. Designed to work seamlessly with the 6890N, the included 7683 Autosampler connects without a controller box or multiple power cords/outlets, and is packed with features including Agilent’s fast-injection technology.

Includes:

• FID Detectors (Flame Ionization Detectors) OPtional
• 7683 Autosampler (100 Vial Capacity)
• Computer Loaded with Chemstation Software
• Manuals and Cables

Features:

• Electronic Pressure Control on detector and injector
• Ambient temperature +4 °C to 450 °C
• Temperature set point resolution: 1 °C
• Supports 6 oven ramps with 7 plateaus, Negative ramps are allowed
• Overview: Laboratories worldwide are looking for a GC solution that delivers reliability, performance, and reproducible results, And nothing produces these benefits like the Agilent 6890N Network GC. By integrating leading-edge technologies with an emphasis on quality manufacturing processes, the 6890N will bring a work ethic to your laboratory that’s matched only by your own.
• Accomplish more with networking abilities

• Lets you share business and scientific data easily within a laboratory and across sites for fast and informed decision making.
• Incorporates local area network (LAN) technology as a standard feature, which makes it easy to link communication and control of multiple analytical instruments. With networking, you can work smarter, faster, and more economically.

• Increased Laboratory Efficiency: Clock-time programming allows you to set up runs for unattended operation whenever you want. The system can be ready to work when you get to your laboratory. Pre-run and post-run commands automatically prepare the system for the next sample.
• Decreased Calibration Time: You can manually enter existing calibration data and make a run with just one standard peak. The system can normalize the calibration table for you, allowing you to cut calibration time and avoid re-running your calibration standards.
• High Sample Throughput: The 6890N network GC system is already set up for the Agilent 7683 automatic liquid sampler, enabling fast and easy installation. Single or dual injectors, equipped with either an 8-sample turret or a 100-vial sample tray, allow unattended operation. Using the 11-vial transfer turret with the tray and the solvent saving mode, you have enough solvent to run unattended eight times longer than before.
• Minimal Rework: The Agilent 6890N network GC system is the only GC system that automatically selects the optimum pressure-control mode for split and splitless analyses. Forward-pressure control is best for splitless injections. Along with a large inlet liner volume and pressure-pulse operation, this mode reduces discrimination, sample degradation, and sample loss caused by liner overload while maximizing sensitivity. For split injections, the system automatically selects back-pressure control for linear split ratios over the entire usable split-ratio range and over wide column flow and pressure ranges. This reduces sample preparation and increases reproducibility and accuracy. Automatic switching between forward-and back-pressure modes yields optimal results in less time and with less effort.

Specifications:

• Automatic injector (optional): Automatic alignment, fast injection
• Liner replacement: Compatible with optional flip-top inlet sealing system
• Injector: Split-splitless (standard), others available
• Oven temperature: Ambient +4 - 450 'C
• Oven ramps / plateaus: 6-7
• Carrier gases: Helium, hydrogen, nitrogen, argon
• Electronic pnuematic control: Auto pressure regulation for split/splitless, septum purge
• Carrier gas control modes: Constant pressure and flow modes; pressure and flow programmable
• Pressure range: 0 - 100 psi (standard), 0 - 150 psi (optional) with 0.01 psi resolution, pressure and temperature corrected
• Retention-time locking:RTL ready
• Flow control: Compatible with optional microfluidics controller
• Height: 50 cm (19.7 in.)

• Width: 58 cm (26.8 in.)
• Depth: 54 cm (21.6 in.)
• Average Weight: 49 kg (108 lb)
• Networkable: Yes
• Ambient Operating Temperature: 15 ËšC to 35 ËšC
• Ambient Operating Humidity: 5-95 %
• Storage Extremes: -40ËšC to 65Ëš
• Line Voltage Requirements: ±5% of nominal
• Dimensions: 28 x 31 x 16 cm
• Operating temperature: 4ËšC above ambient to 450ËšC
• Maximum run time: 120ËšC/min

Includes:

• Agilent 6890 Plus Gas Chromatograph
• 7683 100 Vial Autosampler with Injector Tower

• Agilent 5973
• Edwards RV3 Vacuum Pump
• Computer Loaded with Chemstation Software
• Monitor

Specifications:

Mass Spectrometer:  

• Mode (standard): EI
• Modes (optional): PCI, NCI EI with CI source
• Ion source type: 5 - 241.5 eV
• Ionization energy: 0 - 315 uA
• Ionization current: 100 - 350 'C
• Transfer line temperature: 150 - 300 'C
• Quadrupole temperature: 150 - 200 'C
• Mass filter: Monolithic hyperbolic quadrupole
• Mass filter protection: Entrance lens
• Mass range:6 - 800 amu
• Mass resolution: Unit mass adjustable by tune
• Mass axis stability: Better than 0.10 amu/ 48 h
• Detector: EM with replacement horn
• Dynamic range (electronic): 10e6
• Scan rate (electronic): 10,000 amu/s
• Write-to-disk: 8,000 amu/s
• SIM: 30 ions x 50 groups
• Pumping system: Turbomolecular pump
• Total flow: 2 mL/min (standard turbo)

Gas Chromatograph: 

• Automatic injector (optional): Automatic alignment, fast injection
• Liner replacement: Compatible with optional flip-top inlet sealing system
• Injector: Split-splitless (standard), others available
• Oven temperature: Ambient +4 - 450 'C
• Oven ramps / plateaus: 6-7
• Carrier gases: Helium, hydrogen, nitrogen, argon
• Electronic pnuematic control: Auto pressure regulation for split/splitless, septum purge
• Carrier gas control modes: Constant pressure and flow modes; pressure and flow programmable
• Pressure range: 0 - 100 psi (standard), 0 - 150 psi (optional) with 0.01 psi resolution, pressure and temperature corrected
• Retention-time locking:RTL ready
• Flow control: Compatible with optional microfluidics controller

The Agilent/HP 6890N GC features electronic pneumatic control of all gas pressures and flows. On-board sensors automatically compensate for ambient temperature changes and barometric pressure differences to routinely achieve more accurate and reproducible results. EPC reduces re-calibration frequency and improves laboratory productivity. Designed to work seamlessly with the 6890N, the included 7683 Autosampler connects without a controller box or multiple power cords/outlets, and is packed with features including Agilent’s fast-injection technology.

Includes:

• FID Detectors (Flame Ionization Detectors) OPtional
• 7683 Autosampler (100 Vial Capacity)
• Computer Loaded with Chemstation Software
• Manuals and Cables

Features:

• Electronic Pressure Control on detector and injector
• Ambient temperature +4 °C to 450 °C
• Temperature set point resolution: 1 °C
• Supports 6 oven ramps with 7 plateaus, Negative ramps are allowed
• Overview: Laboratories worldwide are looking for a GC solution that delivers reliability, performance, and reproducible results, And nothing produces these benefits like the Agilent 6890N Network GC. By integrating leading-edge technologies with an emphasis on quality manufacturing processes, the 6890N will bring a work ethic to your laboratory that’s matched only by your own.
• Accomplish more with networking abilities

• Lets you share business and scientific data easily within a laboratory and across sites for fast and informed decision making.
• Incorporates local area network (LAN) technology as a standard feature, which makes it easy to link communication and control of multiple analytical instruments. With networking, you can work smarter, faster, and more economically.

• Increased Laboratory Efficiency: Clock-time programming allows you to set up runs for unattended operation whenever you want. The system can be ready to work when you get to your laboratory. Pre-run and post-run commands automatically prepare the system for the next sample.
• Decreased Calibration Time: You can manually enter existing calibration data and make a run with just one standard peak. The system can normalize the calibration table for you, allowing you to cut calibration time and avoid re-running your calibration standards.
• High Sample Throughput: The 6890N network GC system is already set up for the Agilent 7683 automatic liquid sampler, enabling fast and easy installation. Single or dual injectors, equipped with either an 8-sample turret or a 100-vial sample tray, allow unattended operation. Using the 11-vial transfer turret with the tray and the solvent saving mode, you have enough solvent to run unattended eight times longer than before.
• Minimal Rework: The Agilent 6890N network GC system is the only GC system that automatically selects the optimum pressure-control mode for split and splitless analyses. Forward-pressure control is best for splitless injections. Along with a large inlet liner volume and pressure-pulse operation, this mode reduces discrimination, sample degradation, and sample loss caused by liner overload while maximizing sensitivity. For split injections, the system automatically selects back-pressure control for linear split ratios over the entire usable split-ratio range and over wide column flow and pressure ranges. This reduces sample preparation and increases reproducibility and accuracy. Automatic switching between forward-and back-pressure modes yields optimal results in less time and with less effort.

Specifications:

• Automatic injector (optional): Automatic alignment, fast injection
• Liner replacement: Compatible with optional flip-top inlet sealing system
• Injector: Split-splitless (standard), others available
• Oven temperature: Ambient +4 - 450 'C
• Oven ramps / plateaus: 6-7
• Carrier gases: Helium, hydrogen, nitrogen, argon
• Electronic pnuematic control: Auto pressure regulation for split/splitless, septum purge
• Carrier gas control modes: Constant pressure and flow modes; pressure and flow programmable
• Pressure range: 0 - 100 psi (standard), 0 - 150 psi (optional) with 0.01 psi resolution, pressure and temperature corrected
• Retention-time locking:RTL ready
• Flow control: Compatible with optional microfluidics controller
• Height: 50 cm (19.7 in.)

• Width: 58 cm (26.8 in.)
• Depth: 54 cm (21.6 in.)
• Average Weight: 49 kg (108 lb)
• Networkable: Yes
• Ambient Operating Temperature: 15 ËšC to 35 ËšC
• Ambient Operating Humidity: 5-95 %
• Storage Extremes: -40ËšC to 65Ëš
• Line Voltage Requirements: ±5% of nominal
• Dimensions: 28 x 31 x 16 cm
• Operating temperature: 4ËšC above ambient to 450ËšC
• Maximum run time: 120ËšC/min

Includes

• Computer Loaded w/ Software
• Dual Purged Packed Inlets
• Dual FID
• Dual EPC

Features:

• Full electronic pneumatics control (EPC) is available for all inlets and detectors, ensuring excellent reproducibility, as well as reliable accuracy and precision
• Electronic Pneumatics Regulation (EPR) provides the simplicity of manual operation with high precision digital display of pressure/flow and superior ease-of-use as compared to traditional manual pneumatics systems.
• Easy to learn and use software – choose among a wide selection of OpenLAB CDS software offerings.
• The simplified GC front panel keys and display provide sequence information, instrument conditions, and run status, and minimize operating errors
• Supports the 7693A Automated Liquid Sampler and Tray (not heater/mixer/bar code), 50-sample automatic liquid sampler and PAL3 Auto Sampler systems.
• Optimized performance for everyday productivity and for all routine applications, including those that must comply with regulatory requirements
• Choice of inlets: Split/Splitless Inlet for megabore and all capillary columns; packed for wide bore capillary and packed columns, Programmable Cool On Column inlet for direct injection onto columns.
• Choice of detectors: Flame Ionization Detector (FID); Thermal Conductivity Detector (TCD); micro-Electron Capture Detector (micro-ECD); Nitrogen-phosphorus Detector (NPD); and single wavelength Flame Photometric Detector Plus (FPD+)
• Complementary software keyboard and display allows the user to control the system when it connects with an integrator or 3rd-party software

Features:

The 7890B Gas Chromatograph (GC) System is one of the world’s most widely used GC system. It features accurate temperature controls and precise injection systems, plus enhanced Electronic Pneumatic Control (EPC) modules for the best retention times.

Specifications:

• Dimensions (H x W x L): (19.2 in. x 22.9 in. x 20.2 in.)
• Maximum Temperature: 450℃
• Ambient Temperatures: +4℃ to 450℃
• Temperature Setpoint Resolution: 0.1℃
• Maximum Achievable Temperature Ramp Rate: 120℃/min
• Maximum Operating Temperatures for Auxiliary Zones: 400℃
• Storage Extremes: -40℃ to 70℃
• Frequency: 50/60 Hz
• Inlets: 2
• Detectors: 3
• Detector Signals: 4
• Valves: Supports up to 8 valves

The G1512A Autosampler Controller for a 5890 or 6890 GC.  This unit transfers the communication between the Autosampler and the GC.

The Parker 20H high purity hydrogen gas generators offer the optimum combination of safe operation, reliability and performance. Utilising field proven PEM cell technology, hydrogen is produced on demand from deionised water and electricity, at low pressure and with minimal stored volume. Innovative control software allows unrivalled operational safety and reliability. The H generators ideally supply fuel gas to all known GC combustion detectors used in today’s laboratory workflows. Three models operate at flow rates; 160 ml/min, 250 ml/min and 500 ml/min. Hydrogen generators are available with Remote Networking software. RemoteNet allows up to 27 hydrogen generators to be actively controlled from one central PC, and facilitates true cascading capabilities.

Specification:

• Flow Rate: 160 ml/min
• Purity: >99.9995%
• Water Consumption (27/7, full flow): 1.25 L/week
• Delivery Pressure: 0.3-6.89 bar g / 5-100 psi g
• Ambient Temperature Range: 5 - 40°C (41 - 104°F)
• Water Supply Pressure: 0.1 bar g / 1.45 psi g
• Water Supply Flow Rate: 1 L/min
• Water Quality: Deionised. ASTM II, >1MΩ, <1µs, filtered to <100µm
• Supply Voltage Range: 90 - 264V 50/60Hz

• Port Connections

• Hydrogen Outlet: 1/8” Compression Fitting
• Water Drain: Quick Release Push in Fitting
• Water Fill: Quick Release Push in Fitting
• Dimensions (H x W x D): 456 x 342 x 437 mm (17.9 x 13.5 x 17.2 in.)
• Weight: 19 kg / 41.9 lb (full of water: 23 kg / 50.7 lb)

Includes 1 year warranty

Features:

The Genius 3030 is designed to supply curtain, source and exhaust gases for selected Sciex LC-MS instruments. It is equipped with two outlets for each of the three gases supplied, two of nitrogen and four of dry air, which allows for two Sciex LC-MS instruments to be comfortably run using one Genius 3030.

Specifications:

• Dimensions (HxWxD): (52 x 23.6 x 33.5 inches)
• Gas Type 1 (Nitrogen):

                 Gas Flow: 2x 12L/min

                 Outlet Pressure: 80 psi

• Gas Type 2 (Dry Air):

                  Gas Flow: 2x 24L/min

                  Outlet Pressure: 110 psi

• Gas Type 3 (Dry Air):

                  Gas Flow: 2x 8L/min

                  Outlet Pressure: 60 psi

• Voltage: 230 ± 10%VAC
• Frequency: 50/60Hz
• Current: 12 amps
• StartUp Time: 30 mins

Includes 1 year warranty

Features:

The Genius 3031 is engineered with and increased flow rate specifically for Sciex. The greater flow rate makes this generator ideal for supplying curtain, source and exhaust gas to the Sciex 6500 LC-MS.

Specifications:

• Dimensions (HxWxD): (52 x 23.6 x 33.5 inches)
• Gas Type 1 (Nitrogen, Dry Air):
  Gas Flow: 18L/min
  Outlet Pressure: 70 psi
• Gas Type 2 (Dry Air):
  Gas Flow: 26L/min
  Outlet Pressure: 110 psi
• Gas Type 3 (Dry Air):
  Gas Flow: 25L/min
  Outlet Pressure: 70 psi
• Voltage: 230 ± 10%VAC
• Frequency: 50/60Hz
• Current: 12 amps

Includes 1 year warranty

Features:

The Genius AB-3G is designed to operate to the exact requirements of many Sciex LC-MS instruments. It is a three gas system that provides nitrogen curtain gas, dry air source gas and dry air exhaust gas and benefits from robust integrated compressors.

Specifications:

• Dimensions (HxWxD): (29.6 x 35.4 x 28.7 inches)
• Gas Type 1 (Nitrogen, Dry Air):
          Gas Flow: 12L/min
          Outlet Pressure: 80 psi
• Gas Type 2 (Dry Air):
          Gas Flow: 24L/min
          Outlet Pressure: 110 psi
• Gas Type 3 (Dry Air):
          Gas Flow: 8L/min
          Outlet Pressure: 60 psi
• Voltage: 230 ± 10%VAC
• Frequency: 50/60Hz
• Current: 9.6 amps
• StartUp Time: 30 Mins

Includes 1 year warranty

Features:

The Genius ABN2ZA (Replacement is Genius 1024 -LCMS) is designed exclusively for Sciex applications. It provides a single compact source gas solution for all Sciex LC-MS instruments. This generator is a self-contained system featuring integrated compressors, delivering laboratory-grade nitrogen at various pressures and flow rates required by numerous instruments.

Specifications:

• Dimensions (HxWxD): (28.1 x 23.6 x 29.5 inches)
• Gas Type 1 (Nitrogen, Dry Air):
         Gas Flow: 19L/min
         Outlet Pressure: 65 psi
• Gas Type 2 (Dry Air):
         Gas Flow: 26L/min
         Outlet Pressure: 100 psi
• Gas Type 3 (Dry Air):
         Gas Flow: 25L/min
         Outlet Pressure: 60 psi
• Voltage: 230VAC
• Frequency: 50/60Hz
• Current: 7 amps

Includes 1 year warranty

Features:

The Genius N118LA is a nitrogen generator which can provide carrier gas for LC-MS applications requiring flow rates of up to 18 l/min.

Specifications:

• Dimensions (HxWxD): (28 x 15.7 x 27.6 inches)
• Current: 3.6 amps
• Gas Type: Nitrogen
• Gas Flow: 18.00L/min
• Outlet Pressure: 100 psi
• Voltage: 230 ± 10%VAC
• Frequency: 50/60Hz
• StartUp Time: 30 Mins
• Noise Level: 54 dBA

Includes 1 year warranty

Features:

The Genius NM-3G is engineered for time-critical and emergency applications where an on-site nitrogen gas generation system which is required to guarantee performance at all times. It provides a variety of extra precautionary features, including self diagnostics and highly robust integrated compressors with additional load capacity.

Specifications:

• Dimensions (HxWxD): (29.6 x 35.4 x 28.7 inches)
• Gas Flow: 32L/min
• Inlet Pressure: 100 psi
• Power Consumption: 2185 watts
• Voltage: 230 ± 10%VAC
• Frequency: 50/60Hz
• Current: 9.5 amps
• StartUp Time: 30 mins
• Noise Level: 54 dBA