Used Lab Equipment

Specifications:

• Maximum Volume: 1.5 ml x 36 tubes
• Motor Type: Series Drive
• Speed Controls: Variable
• Dimensions: 290 W x 115 D xx160 H mm
• Net Weight: 2.6Kg
• Power: AC 110/120 V, 50/60 Hz,1A

The Incu-Mixer MP heated microplate mixer is designed to provide an optimal method for vortexing and incubating microplates. Simultaneous heating from both the bottom surface and the lid provide temperature uniformity throughout the sample. Additionally, the heated lid minimizes evaporation and prevents condensation. A compact, 2mm orbit ensures thorough mixing in microplates without splashing. Speed, time and temperature are all displayed in real time on the large LCD screen while an internal validation system constantly monitors all parameters for accuracy. Designed for application flexibility, the Incu-Mixer series is available in two, and four-plate capacities, both capable of accepting all standard plates up to 40mm high. Independent time, temperature and speed controls allow the mixer to function as 3 machines in one; a multi-plate incubator, vortexer, or a combination of the two. The Incu-Mixer MP series is ideal for a wide variety of molecular biology applications including immunochemical reactions, enzyme and protein analysis, and microarray analysis.

Specifications:

• Temp. Range: Ambient +5 to 70°C
• Orbit: 2mm

• Mixing Speed:

• 100 to 1500rpm (4-Plate)
• 100 to 1200rpm (2-Plate)
• Temp. Increment: 0.1°C
• Temp. Accuracy: +/- 0.2C
• Temp. Uniformity: +/- 0.5C
• Speed Increment: 10 rpm

• Dimensions (W x D x H):

• 12.6 x 13.8 x 7.3 in. / 32 x 35 x 18.5 cm (4-Plate)
• 11 x 10.6 x 5.5 in. / 28 x 27 x 14 cm (2-Plate)
• Weight: 18 lbs (8kg)
• Timer: 1 min. to 99 hours 99min. / continuous

• Electrical:

• 115 or 230V, 50-60Hz, 600W (4-Plate)
• 100 to 240V, 50-60Hz, 500W (2-Plate)

The Incu-Mixer MP heated microplate mixer is is designed to provide an optimal method for vortexing and incubating microplates. Simultaneous heating from both the bottom surface and the lid provide temperature uniformity throughout the sample. Additionally, the heated lid minimizes evaporation and prevents condensation. A compact, 2mm orbit ensures thorough mixing in microplates without splashing. Speed, time and temperature are all displayed in real time on the large LCD screen while an internal validation system constantly monitors all parameters for accuracy. Designed for application flexibility, the Incu-Mixer series is available in two, and four-plate capacities, both capable of accepting all standard plates up to 40mm high. Independent time, temperature and speed controls allow the mixer to function as 3 machines in one; a multi-plate incubator, vortexer, or a combination of the two. The Incu-Mixer MP series is ideal for a wide variety of molecular biology applications including immunochemical reactions, enzyme and protein analysis, and microarray analysis.

Specifications:

• Temp. Range: Ambient +5 to 70°C
• Orbit: 2mm

• Mixing Speed:

• 100 to 1500rpm (4-Plate)
• 100 to 1200rpm (2-Plate)
• Temp. Increment: 0.1°C
• Temp. Accuracy: +/- 0.2C
• Temp. Uniformity: +/- 0.5C
• Speed Increment: 10 rpm

• Dimensions (W x D x H):

• 12.6 x 13.8 x 7.3 in. / 32 x 35 x 18.5 cm (4-Plate)
• 11 x 10.6 x 5.5 in. / 28 x 27 x 14 cm (2-Plate)
• Weight: 18 lbs (8kg)
• Timer: 1 min. to 99 hours 99min. / continuous

• Electrical:

• 115 or 230V, 50-60Hz, 600W (4-Plate)
• 100 to 240V, 50-60Hz, 500W (2-Plate)

Features:

• Ideal for mixing many tubes at one time
• Handles larger volumes than standard vortexers
• Speed: 1200 to 2400 rpm

The TubeRocker Mini is designed to provide the ideal tilt angle of 30° and speed of 24 rpm. The grooved design and rubber mats properly secures tube sizes ranging from 1.5 to 50ml without any added bands or straps. All it takes to operate the machine is pressing the power switch.

Specifications:

• Speed: Fixed, 24 rpm
• Tilt Angle: +/- 30°
• Platform Size: 12" x 4.5"
• Load Capacity: 5 lbs
• Operating Temp: +4 to +65°C
• Dimensions: 13.3" x 5.5" x 4"
• Weight: 4 lbs

Benchmark TubeRollers are designed for the gentle, thorough mixing of a variety of containers, including Vacutainers™, bottles, test tubes, centrifuge tubes and roller bottles. Both models (5 roller and 10 roller) operate at a constant 38rpm, chosen as the optimum speed for the broadest range of mixing requirements.

As the roller mechanism rotates through each complete revolution, the right side of each roller is gently elevated about 0.5 in (13mm) and returns to the horizontal starting position. This additional, gentle up/down motion provides a "wave" effect and guarantees that the entire sample is subjected to complete, thorough mixing, end to end. This built in tilt feature provides a level of homogeneous mixing uniformity that can not be matched by any stationary roller apparatus.

Specification:

• Speed: Fixed, 38 rpm (+/- 10%)
• Motion: Simultaneous roll & tilt
• Operating Temp.: +4 to +40°C
• Individual Roller Size: 12 x 12.5 in. / 3 x 32 cm
• Vessels Accepted: 8mm to 200mm (diameter)
• Roller Spacing: 5mm (rollers are on 35mm centers)

Benchmark TubeRollers are designed for the gentle, thorough mixing of a variety of containers, including Vacutainers™, bottles, test tubes, centrifuge tubes and roller bottles. Both models (5 roller and 10 roller) operate at a constant 38rpm, chosen as the optimum speed for the broadest range of mixing requirements.

As the roller mechanism rotates through each complete revolution, the right side of each roller is gently elevated about 0.5 in (13mm) and returns to the horizontal starting position. This additional, gentle up/down motion provides a "wave" effect and guarantees that the entire sample is subjected to complete, thorough mixing, end to end. This built in tilt feature provides a level of homogeneous mixing uniformity that can not be matched by any stationary roller apparatus.

Specification:

• Speed: Fixed, 38 rpm (+/- 10%)
• Motion: Simultaneous roll & tilt
• Operating Temp.: +4 to +40°C
• Individual Roller Size: 12 x 12.5 in. / 3 x 32 cm
• Vessels Accepted: 8mm to 200mm (diameter)
• Roller Spacing: 5mm (rollers are on 35mm centers)

Specifications:

• Capacity: 2 Microplates
• Speed Range: On Mode 300–2500 rpm; Touch Mode 300–3500 rpm
• Orbit: 3.5 mm
• Analog Controls
• Temperature Range: 39 to 104°F
• Relative Humidity: 20% to 85%
• Dimensions: 10.5 x 5.4 x 4.5 in

The ThermoMixer with the traditional orbital shaking frequency. Specially used when in tapered test tubes critical DNA pellets shall be worked out of the conic top to get into solution.Due to an excellent position of the temperature sensor the temperature is measured and controlled "in the middle" of the block, i.e. very close to the probes. Thus a high temperature accuracy is reached and there is a complete and even temperature distribution in the blocks.

Specifications:

• Shaking frequency: 200 - 1500 rpm
• Motion:3mm orbital
• Accuracy:+/- 0.1°C
• Resolution:+/- 0.1°C

The R5010 rotating mixer features adjustable speed and tilt angle, reversing mode for better mixing, and three rotisseries for all common tube sizes. This mixer is cold room and incubator safe.

Specifications:

• Speed: 1 to 40 rpm
• Tilt Angle: 0 to 90°
• Capacity: 12 x 50mL, 20 x 15mL,
• Timer: 1 sec to 9 hours or continuous
• Dimensions: 8.25 x 10.5 x 12.5 in
• Temp Range: +4°C to +60°C
• Weight: 7 lbs

Features:

MULTI-TUBE VORTEX MIXERS

Specifications:

• Control: Analog

• Duty Rating: Continuous

• Orbit: 0.1 in (3.6 mm)

• Item Number: 30392164

Features:

MULTI-TUBE VORTEX MIXERS

Specifications:

• Control: Digital 

• Duty Rating: Continuous

• Orbit: 0.1 in (3.6 mm)

• Item Number: 30392164

Description:

The Fisher Scientific Isotemp Heat Block, catalog # 11-718 accommodates 1 block and features high wattage, constant-temperature heaters that are economical, versatile, and compact. This model accepts several interchangeable blocks, accommodating various tube sizes from 0.25mL micro to 15mL. Each block has a thermometer well. Efficient heater features close tube-and-block contact with a low density design for exceptional temperature uniformity.

Specifications:

• Dimensions (W x D x H): 8" x 9" x 4"
• Electrical: 115 Volts, 50/60 Hz, 1.6A

Features:

• G1364A Thermostatted Fraction Collector, preparative scale, can be created by additionally ordering and installing a G1330A Fraction Collector Thermostat

• For preparative scale applications

Specifications:

• Trigger Modes: Time slices, Peak (threshold, up- /downslope), Timetable (combination of time intervals and peak) and Manual trigger (supported only with G1323BControl Module)
• Operating Modes: Discrete fractions: default mode for all vessels. The flow is diverted to waste, while moving from one vessel position to the next vessel position Continuous flow: optional, available only when using well plates. It is possible to move from one well plate position to the next one without diverting the flow into the well plate to waste
• Test tube /plate sizes: Minimum 48 mm to 100 mm maximum
• Maximum tube volume: ca. 45 ml
• Maximum flow rate: 100 ml / min (depending on viscosity and generated back pressure, max. 6 bar at the diverter valve)
• Delay volumes [μl]:
• Fraction collector inlet to diverter valve: -500 (typical, depends on length of the tubing)
• Diverter valve: ~15
• Diverter valve to needle: ~110
• Needle: -~5
• Delay calibration Sensor: Single wavelength absorbance detector working at 654 nm, consisting of a LED and a photo diode
• Diverter Valve: 3/2 Diverter valve with low internal volume (15 μl), switching time < 100 ms, maximum operating pressure 6 bar
• Cooling: Optional (with additional G1330B), performance depending on ambient conditions and the volume of collected fractions
• Maximum capacity: 3 fraction collectors in parallel plus one recovery fraction collector connected via 12-Position, 13-Port Selector valve
• GLP features Early maintenance feedback (EMF), electronic records of maintenance and errors
• Interfaces: Controller-area network (CAN). optional; LAN or external contacts interface RS232C, APG-remote (for remote start / stop signals to / from other modules) Interface to G1330A Thermostat CAN-DC-out for operation of Agilent approved external devices like valves
• Safety features: Leak detection and safe leak handling, error detection and display, exhaust fan for fume extraction of hazardous vapors

Can be sold as an individual component or as part of a complete stack

Features:

• G1364C Fraction Collector, analytical scale, designed for flow rates below 10 ml / min. (can be modified for higher flow rates) and for the use with vials, test tubes of up to 75 mm height, well-plates and a 40-funnel tray connecting to external locations of any size 

• For analytical scale applications

Specifications:

• Trigger Modes: Time slices, Peak (threshold, up- /downslope), Timetable (combination of time intervals and peak) and Manual trigger (supported only with G1323BControl Module)
• Operating Modes: Discrete fractions: default mode for all vessels. The flow is diverted to waste, while moving from one vessel position to the next vessel position Continuous flow: optional, available only when using well plates. It is possible to move from one well plate position to the next one without diverting the flow into the well plate to waste
• Test tube /plate sizes: Minimum 48 mm to 100 mm maximum
• Maximum tube volume: ca. 45 ml
• Maximum flow rate: 100 ml / min (depending on viscosity and generated back pressure, max. 6 bar at the diverter valve)
• Delay volumes [μl]:
• Fraction collector inlet to diverter valve: -500 (typical, depends on length of the tubing)
• Diverter valve: ~15
• Diverter valve to needle: ~110
• Needle: -~5
• Delay calibration Sensor: Single wavelength absorbance detector working at 654 nm, consisting of a LED and a photo diode
• Diverter Valve: 3/2 Diverter valve with low internal volume (15 μl), switching time < 100 ms, maximum operating pressure 6 bar
• Cooling: Optional (with additional G1330B), performance depending on ambient conditions and the volume of collected fractions
• Maximum capacity: 3 fraction collectors in parallel plus one recovery fraction collector connected via 12-Position, 13-Port Selector valve
• GLP features Early maintenance feedback (EMF), electronic records of maintenance and errors
• Interfaces: Controller-area network (CAN). optional; LAN or external contacts interface RS232C, APG-remote (for remote start / stop signals to / from other modules) Interface to G1330A Thermostat CAN-DC-out for operation of Agilent approved external devices like valves
• Safety features: Leak detection and safe leak handling, error detection and display, exhaust fan for fume extraction of hazardous vapors

Can be sold as an individual component or as part of a complete stack