Used Lab Equipment

Features:

1510MTH (mechanical timer with heat)

Specifications:

• Tank Size: (LxWxD): 6" x 5.5" x 4"
• Capacity: 1/2 gallon
• Frequency: 40 kHz

Features:

The Branson 1510R-MTH Ultrasonic Cleaner is designed for reliable and durable performance. The ultrasonic cleaner is safe enough for delicate jewelry and powerful enough to remove proteins, buffing compounds and heavy oils. This ultrasonic cleaner has a mechanical timer with heat.

Specifications:

• Frequency: 40kHz
• Weight: 7 lb.
• Tank capacity: .5 gal
• Dimensions: 12" W x 11.5" L x 10" D (30.48 x 29.21 x 25.4 cm)
• Tank dimensions: 5.5" W x 6" L x 4" D (13.97 x 15.24 x 10.16 cm)

Description:

The Fisher Scientific FS20H Ultrasonic Cleaner with timer is powerful enough to remove heavy oils, buffing compounds, proteins, consistent enough to manage difficult laboratory cleaning, and safe enough for delicate components or fine jewelry. Ultrasonic sound waves move through a cleaning solution, creating an effect called cavitation, which is the rapid formation and collapse of microscopic bubbles.

Specifications:

• Tank Capacity: 3/4 gallon
• Tank Dimensions (L x W x D): 6 x 5.5 x 6 in
• Overall Dimensions (L x W x H): 8.9 x 8.9 x 11.3 in
• Ultrasonic Power: 80 W
• Heater Power: 63 W
• Operating Frequency: 40 kHz

The ultrasonic electronic generator transforms AC line power to a 20 KHz signal that drives a piezoelectric converter/transducer. This electrical signal is converted by the transducer to a mechanical vibration due to the characteristics of the internal piezoelectric crystals.

The vibration is amplified and transmitted down the length of the horn/probe where the tip longitudinally expands and contracts. The distance the tip travels is dependent on the amplitude selected by the user through the touch screen pad. As you increase the amplitude setting the sonication intensity will increase within your sample.

In liquid, the rapid vibration of the tip causes cavitation, the formation and violent collapse of microscopic bubbles. The collapse of thousands of cavitation bubbles releases tremendous energy in the cavitation field. The erosion and shock effect of the collapse of the cavitation bubble is the primary mechanism of fluid processing.

The probe tip diameter dictates the amount of sample that can be effectively processed. Smaller tip diameters (Microtip™ probes) deliver high intensity sonication but the energy is focused within a small, concentrated area. Larger tip diameters can process larger volumes, but offer lower intensity. 

The choices of a generator and horns/probes are matched to the volume, viscosity and other parameters of the particular application. Horns are available for both direct and indirect sonication. The Accessories section has more information on this subject.

Ultrasonic processors have proven to be highly effective for many applications including:

• Cell disruption
• Nanoparticle dispersion
• Homogenization
• Shearing DNA
• Disaggregation
• Focused cleaning
• Mixing
• Degassing
• Catalyzing reactions

Features:

The Sonic Dismembrator is a device that creates ultrasonic energy and transmits this energy through a titanium probe into a liquid sample. This process creates cavitation (the implosion of micro-bubbles with high shear forces) which has the ability to process samples in many scientific applications. Sonic Dismembrators feature a wide range of accessories which enable the user to process microliter to one liter sample volumes. Small volumes require

Specifications:

• Dimensions (generator): 8” W x 15” L x 9” H
• Power rating: 500 watts
• Operating frequency: 20 kHz

 Specifications: 

*011-0010 High Precision X, Y, Z Stage

• The design of the stage enables high-speed operation and ensures accurate sample deposition and reproducible spot allocation. It comprises linear drives for X and Y movements and a spindle drive for Z movements.
• Positioning Performance:
• Resolution (adjustable, software controlled): 1 um
• Accuracy: <‡ 10 um (Absolute Position)
• Precision: <‡2 um (Repeat Position)
• The specifications are valid for the following conditions:
• Temperature range: 18 - 28 °C
• Temperature stability (environment): ‡ 1 K Machine temperature (after pre warm period: ‡ 1 K
• Speed: 150 cm/sec
• Dimensions (l/w/h): 137/58/47 cm; Weight: 135 kg
• Overall travel (mm): x=1143; y=115
• Spottable area (mm): x=905; y= 1 13.5

*F011-0020 Piezo Driver Electronics

• Supports up to 8 piezo dispense capillaries (PDC) and piezo dispense pens (PDP). Each PDC is activated, configured and controlled individually. This includes freely adjustable voltage, pulse width, frequency and number of drops per position. In addition, each PDC has an ultrasonic self-cleaning mode.

*5011-0040 Wash Station

• Chemically inert wash chamber enables each PDC to be washed separately with aid of ultrasonics. The wash solution is supplied by a high-quality peristaltic pump.

*F011-0050 Dispense Control Station

• Includes high-resolution optical components, a stroboscope LED and a horizontally mounted CCD camera. The station can assist optimization of the dispense parameters. In combination with Drop Control' and the respective Upgrade to Volume Control' the automated control of the dispense performance during operation will be enabled.

*011-0060 Tray Station

• Chemically inert PIFE tray with a single 1.8ml chamber. Can be filled with additional sciCLEAN wash solutions.

*F011-0070 200 ul Reaction Vessel Holder

• Accommodates up to 4 individual 200ul reaction vessels. Can be used as source for single samples or additional wash solutions.

*F011-0080 Environmental Enclosure

• Lockable transparent hood, fully enclosing the stage.
• Dimensions (l/w/h): 150/69/55 cm; Weight: 42 kg

*F011-0090 Instrument Control Software

• The intuitive control software provides a fully automatic workflow.
• It comprises a flexible scripting interface and visual control of the instrument settings and performance as well as live video image of the dispense control station.
• The software comes with a library of tasks and runs which ensure the functionality of the device. The included Task Creator allows creation and modification of tasks.

*F011-0100 PC with 17" LCD-monitor.

• PC system running Windows XP Pro.

*011-0110 CD

• User Manuals in PDF format
• Demo and Training Software
• Enables the simulation of runs for training or process development and the demonstration of software options.

*F011-2080 Liquid Handling Channel

• Supplies the fluidics for one PDC. Includes a syringe pump, valve, syringe and all related fittings and tubings. Each Liquid Handling Channel is supplied and controlled individually.

*P-2030 PDC 70 Piezo Dispense Capillary

• S5, 11, SX, DW, S3 (4x manifold)
• Fixed drop volume between 300-360 pl

*S-6070 PDC Coating Type 2

• Can enhance performance for spotting of samples containing organic solvents like DMSO, DMF etc.
• Nozzle No.: 17065, 17188, 17016, 17463, 15641

*F011-9110 Online Target Alignment Suite

• (Requires microscope with CCD camera) Recommended for multiple complex target geometries (e.g. biosensors, microstructures). Allows the user to write fully customized recognition and alignment routines.
• Comprises the following software modules:
  • F011-1210 Find Target Array
  • F011-1230 Find Target Reference Points
  • F011-1240 Target Reference Points to Spots

*F011-2040 Source & Target Plate Holder for one 384 well plate, coolable

*F011-2066Vacuum Pump

• Clean room compatible. Suction capacity 4 m'/h, final pressure 70 mbar, typical noise level 45 BA, ambient temperature range (operation) 10-40°C weight 11 kg. Available for 110/220V, 50/60 Hz.

*F011-2100 Cooling Unit (PC controlled)

• Provides active cooling of the source plate module and/or the slide holder.
• Minimum temperature: -20°C. Controlled by Instrument Control Software. (Mandatory for Dew Point Control)

*F011-2110 Humidity Control

• The package consists of a state-of-the-art humidifier and a humidity and temperature sensor, The humidity inside the provided hood will be regulated at any value 10% above room humidity up to a maximum of 75% (PC controlled).
• Noncondensing conditions required during operation of the instrument.

*F011-2120 Head camera incl. coaxial illumination

• Vertically mounted B/W CCD camera for optical control and data acquisition of the targets. The camera is equipped with a coaxial illumination. It is mounted on the dispense head, connected to the PC and supported by the instrument control software.
• Useful for pre- and post-spotting processes (e.g. detection of structures for automated target recognition). Manual control (Target Position) is included in the price. Other applications on request. The appropriate camera type and the light source depends on the target. If necessary, the camera / light source must be changed. This could lead to additional costs. Other cameras (e.g. color, other magnifications) on request. Resolution (768 × 576 pxl or 6.4 × 4.7 mm)
• Scienion offers a solution for customer target recognition.

*F011-1020 Drop Control

• This fool provides automatic recognition of the dispensed drop and enables the control of the dispense performance during operation. It further regulates the speed of the drop, thereby stabilizing the printing process.

*F011-1030 Upgrade to Volume Control

• In addition to automatic recognition of the dispensed drop, this tool regulates the volume of the drop, ensuring maximum stability of the dispense process and comparability between different runs.

*F011-1040 Dew point control

• A special software calculates the dew point depending on humidity and temperature in the hood and regulates the temperature of the source plate holder to prevent condensation.

*F011-1250 Online Array QC Software (requires microscope with CCD camera)

• Imaging and Image analysis software. Image(s) of the target area will be automatically analyzed for roundness of spots, missing spots and positional accuracy of spots. Inter and intra array spot analysis. Graphical and numerical reports.

*F011-1251 Scan Spot Area

• Moves the camera over the spot area and makes an image either of the entire target or only the spotted fields.
• Alternatively, locations to be imaged can be defined. Multiple images can be stitched to give a single image.

The BD FACSCanto system breaks new frontiers in flow cytometry by providing an efficient, easy-to-use yet powerful six-color benchtop analyzer. It incorporates many technology advances first developed in the BD LSR II expandable analyzer and the BD FACSAria cell sorter. It supports a broad range of research applications, being particularly suited for rare event analysis with its high speed, great sensitivity, and minimal sample-to-sample carryover.

The BD FACSCanto system combines a patented optical design for enhanced signal retention on six fluorescent and two scatter parameters, digital electronics for processing up to 10,000 events per second, and a novel sample injection tube supporting carryover of less than 0.1%. Your total benefit consists of the best fluorescence sensitivity to resolve dim events, cleaner data due to minimal sample contamination, and rapid processing rates, preserving valuable time for science. BD FACSCanto performance overcomes obstacles in rare event analysis and in functional studies for low detection ranges.

Includes:

• Computer w/ FacsDiva Software

• Fluids Cart
• 2 laser, Blue(488) and Red (633)
• Laser
• 6 PMTs unit and side scatter

• All Necessary Cables
• Manuals

Optics Specifications:

• Lasers
  • Air-cooled:
  • 488-nm solid state, 20-mW laser output
  • 633-nm HeNe, 17-mW laser output
• Laser Configuration: Spatially separated beams with 9 x 65-μm elliptical spots
• Optical Alignment Procedure: Fixed, no operator alignment required
• Flow Cell: 180 x 430-μm rectangular quartz flow cell
• Collection Optics: Optical-gel coupled 1.2 NA lens
• FSC Resolution: 0 μm
• SSC Resolution: 5 μm
• Fluorescence Detector Design: Reflective optics with single transmission filter in front of each PMT
• FSC Detector: Photodiode with 488/10 BP
• SSC Detector: PMT with 488/10 BP
• Fluorescence Detectors: 6 PMTs in 4-2 standard configuration
• Blue Laser Dyes
  • FITC, PE, PerCP or PerCP-Cy™5.5,
  • PE-Cy7 (525, 575, 678 or 695, 785 nm)
• Red Laser Dyes: APC, APC-Cy7 (660, 785 nm)
• Detector Bands
  • Blue Laser: 530/30; 585/42; >670; 780/60 nm
  • Red Laser: 660/20; 780/60 nm
• Fluorescence Threshold Sensitivities: FITC <100 MESF; PE <50 MESF

The BD FACSCanto system breaks new frontiers in flow cytometry by providing an efficient, easy-to-use yet powerful six-color benchtop analyzer. It incorporates many technology advances first developed in the BD LSR II expandable analyzer and the BD FACSAria cell sorter. It supports a broad range of research applications, being particularly suited for rare event analysis with its high speed, great sensitivity, and minimal sample-to-sample carryover.

The BD FACSCanto system combines a patented optical design for enhanced signal retention on six fluorescent and two scatter parameters, digital electronics for processing up to 10,000 events per second, and a novel sample injection tube supporting carryover of less than 0.1%. Your total benefit consists of the best fluorescence sensitivity to resolve dim events, cleaner data due to minimal sample contamination, and rapid processing rates, preserving valuable time for science. BD FACSCanto performance overcomes obstacles in rare event analysis and in functional studies for low detection ranges.

Includes:

• Computer w/ FacsDiva Software
• Fluids Cart
• 2 laser, Blue(488) and Red (633)
• 3 PMTs in 4-2 configuration w/ side scatter
• All Necessary Cables
• Manuals

Optics

Lasers

• Air-cooled
• 488-nm solid state, 20-mW laser output
• 633-nm HeNe, 17-mW laser output
• Laser Configuration: Spatially separated beams with 9 x 65-μm elliptical spots
• Optical Alignment Procedure: Fixed, no operator alignment required
• Flow Cell: 180 x 430-μm rectangular quartz flow cell
• Collection Optics: Optical-gel coupled 1.2 NA lens
• FSC Resolution: 1.0 μm
• SSC Resolution: 0.5 μm
• Fluorescence Detector Design: Reflective optics with single transmission filter in front of each PMT
• FSC Detector: Photodiode with 488/10 BP
• SSC Detector: PMT with 488/10 BP

• Fluorescence Detectors: 6 PMTs in 4-2 configuration w/ side scatter