Used Lab Equipment

Used Lab Equipment

We offer an assortment of used and refurbished Hoods ranging from Biosafety Cabinets, Laminar Flow Hoods and Fume Hoods to Glove Boxes. Some of our popular manufacturers include Baker, Labconco, Thermo Forma, Nuaire, Plas-Labs and Sheldon.

Vacuum Oven: 166-180 of 285

*Please Select a Category and/or Manufacturer dropdown OR Search By Model Name, # or Keyword.* Advanced Search >
Cambridge Scientific CSP-TS-8524 *New* -80 Freezer

Cambridge Scientific CSP-TS-8524 *New* -80 Freezer

Cambridge ID #: 25786

Features:

New Cambridge Scientific -80 is equipped with cutting edge COSCOM (Combination Of Single Compressor Operation Mode) technology by two independent compressor mecha-nisms. Combination of VIP(Vacuum Insulation Panel) and insulation by high pressure injection enable maximum insulation as well as lowest energy consumption for keeping your valuable samples with maximum safety. Auto Cascade system with COSCOM technology protects your samples from any risk other than blackout. With low noise and all time monitoring “Blackbox” service, our new -80 shall be a successful companion of your comfortable research. 

Specifications:

Available Capacity (L): 730 liters

Ext. Dimensions (WxDxH mm): 1227 x 957 x 1980

Int. Dimensions (WxDxH mm): 890 x 635 x 1290

Weight(Kg): 378

2” Cryo Boxes: 20 boxes x 24 rack

3” Cryo Boxes: 12 boxes x 24 rack

2” Racks/Freezer: 480 boxes

Temperature: -60℃ ~ -90℃

Insulation: 130 mm Non CFC, foamed in place polyurethane with VIP

Voltage: 220V 60Hz, 230V 50Hz

Acceptable range: 110V(100-120), 220V(208-230), 230V(220-240)

Certification: ISO9001 / ISO14001 / ISO13485 / CE / KGMP / ETL

Refrigeration: 2 x 1.25 HP

Learn More
Cambridge-Scientific-CSP-TS-8524-*New*--80-Freezer-25786
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
 CSP-TFD 8508 *New* Freeze Dryer

CSP-TFD 8508 *New* Freeze Dryer

Cambridge ID #: 25765

Features:

  • Cambridge Scientific freeze dryers developed by combination of ultra low temperature free-zing and vacuum drying technology suits various requirements of customers by modular combination of each functionality and flexibility, so customers can accomplish prompt and easy freeze drying research and development
  • Stainless Steel condenser
  • Condenser protected against acids by teflon coating
  • Hot gas defrost possibility after a run
  • Very durable compressors from Danfoss
  • Option for manual or automatic run
  • User-friendly drain
  • User-friendly touch-screen control panel includes the following features.

Switch on / off
Condenser on / off
Vacuum on / off
Release vacuum
Defrost on / off
Manual / automatic selection
Digital temperature display
History graph with temperature and vacuum
History of alarms
Digital vacuum display
USB connection for data output

Specifications:

Ice Capacity: 8 litres, 12 liters, 18 liters

Dimensions: (WxDxH mm) : 800x705x860

Condensor Temperature: -70°C to -85°C

Refrigeration: 1 ¼ HP

Drying Chamber: Multi / Clear / Heated / Manifold Drying Chamber

Vacuum Pump: ISL136 (196 LPM) / ISL201 (283 LPM)

Voltage: 220 V ~ 60 Hz, 230 V ~ 50 Hz

Certification: ISO 9001 / ISO 14001 / CE

Learn More
-CSP-TFD-8508-*New*-Freeze-Dryer-25765
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Sorvall Discovery 90 Floor Ultra Speed Centrifuge

Sorvall Discovery 90 Floor Ultra Speed Centrifuge

Cambridge ID #: 13603

The Sorvall Discovery 90 Ultra Centrifuge features simple keypad and large LCD display for easy set-up of routine spins. A Dual display of SET and RUN conditions - verify performance at a glance. 

Specifications:

  • Speed Control Accuracy: +/- 10 rpm
  • Temperature Set Range: 0°C – 40°C
  • Step Run: 9 single step runs
  • Vacuum Level Indication: 15
  • Noise Level: 53 dB
  • Chamber Dimensions: 90 x 90 mm
  • Dimensions: 27 x 31 x 40 in
Learn More
Sorvall-Discovery-90-Floor-Ultra-Speed-Centrifuge-13603
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
 CSP-TFD-8501 *New* Freeze Dryer

CSP-TFD-8501 *New* Freeze Dryer

Cambridge ID #: 25770

Features:

  • Compact size: With minimal space like desk top or limited area, installation is possible due to compact and handy design.
    7” TFT LCD Touch Screen:
  • Defrosting system: Condensed ice must be removed within 30 minutes for continuous operation and for preventing contamination. Condensed ice must be removed within 30 minutes for continuous operation and for preventing contamination.
  • Remote Access & Observation Window: Connectable with PC by serial port. Available for monitoring temperature, vacuum level and operation status.
  • Multi drying chamber: New Multi Drying Chamber can be applied with various containers such as “Serum bottle, ampoule, complete flask, Petri dish and/or bulk tray”.

Specifications:

Ice Capacity: 2 liters

Ext. Dimensions (WxDxH mm): 450x525x500

Condensor Temperature: -70 to -85°C

Refrigeration: 3/8HP

Electrical: 220V 60Hz, 230V 50Hz

Certification: ISO9001 / ISO4001 / CE

Option

Certification: ISO9001 / ISO4001 / CE

Drying Chamber: Multi Drying Chamber / Drying Chamber / Clear Drying Chamber / Heated Drying Chamber / Manifold Drying Chamber

Product Shelf: PH1212

Vacuum Pump: ISL6 (100 LPM) / ISL136 (196 LPM)

Certification: ISO 9001 / ISO 14001 / CE"

 

Learn More
-CSP-TFD-8501-*New*-Freeze-Dryer-25770
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Savant DNA1200P-120 Concentrator

Savant DNA1200P-120 Concentrator

Cambridge ID #: 12380

Features:

 

It is a high performance DNA SpeedVac concentrator offering rapid and efficient concentration and drying of small-volume DNA/RNA samples.

 

Specifications:

 

  • Displacement:31L/min (at 50Hz) ; 36L/min @ 60Hz
  • Maximum Vacuum:7 Torr (9mbar)
  • Capacity: 4L
Learn More
Savant-DNA1200P-120-Concentrator-12380
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Sorvall Discovery 100SE Floor Ultra Speed Centrifuge

Sorvall Discovery 100SE Floor Ultra Speed Centrifuge

Cambridge ID #: 22415

Features:

  • Maximum speed of 100,000 rpm (802,006 x g)
  • Control Panel is simple with easy key operation and easy to see liquid crystal screen
  • The displayed language can be switched over between English and Japanese
  • The real time control(RTC) feature enables setting a start time or a finish time, thus letting you run your machine at a desired date and time
  • Centrifugal force (RCFmax and RCFavg) can be displayed and set
  • Twenty varieties of nine modes can be programmed for a wide range of applications
  • Various alarms notify users of causes and necessary actions when fault conditions are detected allowing easier and quicker troubleshooting
  • Space saving design. The installation area required is 0.81 m2 (90x90cm) pr 9.0 ft2 (3.0x3.0 ft). Lower top deck makes it easy to install and remove the rotor.
  • Low noise level makes the ultracentrifuge suitable for use in any laboratory.
  • Samples can be easily balanced visually.
  • CFC-free thermoelectric cooling system with greater cooling capacity.

 

Specifications:

  • Maximum speed: 100,000 rpm
  • Maximum centrifugal force: 802,006 x g
  • Speed control accuracy: ± 10 rpm (1,000 rpm to maximum speed)
  • Time for acceleration and deceleration: About 5 minutes from 0 to 100,000 rpm or vice versa
  • Rotor temperature control/display accuracy: ±0.50C (set temperature is from 00C to 400C)
  • Set speed: 1,000 rpm to maximum speed in increments of 100 rpm
  • Vacuum system: Oil rotary vacuum pump and oil diffusion pump combined Ultimate vacuum of 0.13 Pa
  • Noise level: 53 dB (measured 1 m in front of the instrument)
  • Maximum heat dissipation into room: 1kW/hr
  • Cooling method: Thermo-module cooling (CFC-free)
  • User interaction means: Liquid crystal display and keyboard
  • Interface: RS232C x 1 CH
  • Dimensions(WxDxH): 79x69x100cm (31x27x39in). Depth with safety cover mounted: 890mm(35 in). Height to table: 85cm(33.5 in)
  • Weight: 400 kg (882 lb.)
  • Power requirement: Single phase, 50/60 Hz. 208,220 Vac ± 10%, 20 A maximum (normally 8 A). 230,240 Vac ± 10 %, 16 A maximum (normally 7 A)

Operating temperature: 10 to 350C

Learn More
Sorvall-Discovery-100SE-Floor-Ultra-Speed-Centrifuge-22415
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Thermo Fisher Scientific DXF24040A -40 Freezer

Thermo Fisher Scientific DXF24040A -40 Freezer

Cambridge ID #: 23466
  • Features:
  • State-of-the-art refrigeration system
  • Knee-level, easy-to-use microprocessor control panel
  • Vacuum relief port permits easy access after door openings
  • Five interior compartment doors to reduce cold air loss, improve temperature recovery after door closings (five door option available)
  • Rugged Construction:
  • Heavy gauge, cold-rolled steel exterior construction with a powder coat paint finish that resists chipping and rust
  • Painted galveneel interior (stainless steel option available) in three sizes: 13, 17, and 23 cu.ft. (240, 320, 400L) to accommodate specific lab space and capacity requirements
  • 5 in. (127mm) foamed-in-place, polyurethane insulation
  • Sturdy, solid, stainless steel shelving to support a full product load
  • Water-cooled condenser option available
  • Includes:
  • Ergonomic, lockable door handle
  • Power Management System with low voltage surge protection and buck/boost
  • Easy-to-remove air filter
  • Single 1 in. (25mm) access port
  • Optional Accessories:
  • Optional CO2 or LN2 safety back-up system for additional protection in the event of a power or mechanical failure
  • Optional, built-in chart recorder for continuous monitoring
  • Warranty varies by country, please contact us for details
  • Learn More
    Thermo-Fisher-Scientific-DXF24040A--40-Freezer-23466
    By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
    Neutec Eddy Jet 2 Spiral Plater

    Neutec Eddy Jet 2 Spiral Plater

    Cambridge ID #: 17979

    Features:

    The Eddy Jet 2 Spiral Plating System is a color screen touch screen fully programmable spiral inoculation instrument with accuracy and reproducibility of greater than 99%. This uses a unique gamma-Irradiated disposable micro-syringe for each new sample, eliminating cross-contamination and the need for a vacuum source or washing steps.

    Specifications:

    • Maximum Syringe Volume: 100 µl
    • Maximum Flow Rate: 50 µl / sec.
    • Minimum Step Volume: < 0.1 µl
    • Reproducibility: < 1%
    • Spreading Modes Stored: all the accepted
    • External Balance Connection: serial RS232
    • Printer Connection: serial RS232
    • Mains: 230/100 VAC, 50/60 Hz.
    • Power: 440W
    • Dimensions (WxHxD): 7" x 12.6" x 16"
    • Weight: 44 lb.
    Learn More
    Neutec-Eddy-Jet-2-Spiral-Plater-17979
    By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
    BioTek ELX405U Microplate Washer

    BioTek ELX405U Microplate Washer

    Cambridge ID #: 16217

    Featuring:
    • 96 well microplate washing

    Includes:
    • Vacuum Pump
    • Valve Module
    • Reservoir Bottles
    • Waste Bottle
    • Tubing
    • Manual

    Learn More
    BioTek-ELX405U-Microplate-Washer-16217
    By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
    BioTek ELX405VR Microplate Washer

    BioTek ELX405VR Microplate Washer

    Cambridge ID #: 17063

    Featuring:
    • 96 well microplate washing

    Includes:
    • Vacuum Pump
    • Valve Module
    • Reservoir Bottles
    • Waste Bottle
    • Tubing
    • Manual

    Learn More
    BioTek-ELX405VR-Microplate-Washer-17063
    By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
     FH-090-PP*NEW* Fume Hood

    FH-090-PP*NEW* Fume Hood

    Cambridge ID #: 22878

    Features:

    • Polypropylene structure with high chemical resistance
    • One-piece welded structure
    • Built-in polypropylene worktop
    • Air suction from both the top and back panel
    • Tempered glass sliding front sash
    • Eco-friendly, cost-effective 800 LUX LED lighting separated from the work area
    • Includes polypropylene lower base Hood
    • Optional: sink/water tap/gas tap/vacuum tap, electric sockets
    • 5″ color touch screen controlling lighting and power, optional VAV system
    • Optional upgrade to AFA system with a 7″ color touch screen, air velocity monitoring and display based on a sensor, and alerts upon deviations
    • EN-14175, ASHRAE 110-1995, CE certified

     

    Learn More
    -FH-090-PP*NEW*-Fume-Hood-22878
    By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
     FH-090*NEW* Fume Hood

    FH-090*NEW* Fume Hood

    Cambridge ID #: 22864

    Features:

    • Metal epoxy-coated oven-tempered structure
    • Tempered glass sliding front sash
    • Air suction from both the top and back panel
    • LED lighting at 800 LUX, with optional rupture protection
    • Airflow velocity of 0.5±0.1 m/s, 100±20 FPM
    • Side walls coated with 6 mm HPL for durability and easy cleaning, option for polypropylene/stainless steel
    • Epoxy work surface with raised edges, with options for HPL/stainless steel/polypropylene/ceramic
    • 7″ color touch screen controlling lighting and power, optional VAV system
    • Optional upgrade to AFA system with a 7″ color touch screen, air velocity monitoring and display based on a sensor, and alerts upon deviations
    • Includes metal lower base cabinet
    • EN-14175 / CE / ASHRAE 110-1995 certified
    Learn More
    -FH-090*NEW*-Fume-Hood-22864
    By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
     FH-120-PP*NEW* Fume Hood

    FH-120-PP*NEW* Fume Hood

    Cambridge ID #: 22879

    Features:

    • Polypropylene structure with high chemical resistance
    • One-piece welded structure
    • Built-in polypropylene worktop
    • Air suction from both the top and back panel
    • Tempered glass sliding front sash
    • Eco-friendly, cost-effective 800 LUX LED lighting separated from the work area
    • Includes polypropylene lower base Hood
    • Optional: sink/water tap/gas tap/vacuum tap, electric sockets
    • 5″ color touch screen controlling lighting and power, optional VAV system
    • Optional upgrade to AFA system with a 7″ color touch screen, air velocity monitoring and display based on a sensor, and alerts upon deviations
    • EN-14175, ASHRAE 110-1995, CE certified

     

    External Dimensions W x D x W:

    • 1200 x 830 x 2320 mm
      47.3x 32.6 x 91.3”

    Workspace (W x D x H):

    • 1000 x 630 x 1170 mm
      39.4 x 24.8 x 46”
    Learn More
    -FH-120-PP*NEW*-Fume-Hood-22879
    By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
     FH-120*NEW* Fume Hood

    FH-120*NEW* Fume Hood

    Cambridge ID #: 22865

    Features:

    • Metal epoxy-coated oven-tempered structure
    • Tempered glass sliding front sash
    • Air suction from both the top and back panel
    • LED lighting at 800 LUX, with optional rupture protection
    • Airflow velocity of 0.5±0.1 m/s, 100±20 FPM
    • Side walls coated with 6 mm HPL for durability and easy cleaning, option for polypropylene/stainless steel
    • Epoxy work surface with raised edges, with options for HPL/stainless steel/polypropylene/ceramic
    • 7″ color touch screen controlling lighting and power, optional VAV system
    • Optional upgrade to AFA system with a 7″ color touch screen, air velocity monitoring and display based on a sensor, and alerts upon deviations
    • Includes metal lower base cabinet
    • EN-14175 / CE / ASHRAE 110-1995 certified

     

    External Dimensions W x D x W:

    • 1200 x 800 x 2350 mm
      47.2 x 31.5 x 92.5”

    Workspace (W x D x H):

    • 950 x 680 x 1145 mm
      37.4 x 26.7 x 45”
    Learn More
    -FH-120*NEW*-Fume-Hood-22865
    By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
     FH-130-PP*NEW* Fume Hood

    FH-130-PP*NEW* Fume Hood

    Cambridge ID #: 22880

    Features:

    • Polypropylene structure with high chemical resistance
    • One-piece welded structure
    • Built-in polypropylene worktop
    • Air suction from both the top and back panel
    • Tempered glass sliding front sash
    • Eco-friendly, cost-effective 800 LUX LED lighting separated from the work area
    • Includes polypropylene lower base Hood
    • Optional: sink/water tap/gas tap/vacuum tap, electric sockets
    • 5″ color touch screen controlling lighting and power, optional VAV system
    • Optional upgrade to AFA system with a 7″ color touch screen, air velocity monitoring and display based on a sensor, and alerts upon deviations
    • EN-14175, ASHRAE 110-1995, CE certified

     

    Learn More
    -FH-130-PP*NEW*-Fume-Hood-22880
    By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping