Description
The 1260 Infinity II Analytical-Scale Fraction Collector is optimized for laboratories performing analytical-scale compound purification of nanogram to milligram quantities with typical flow rates between 0.1 and 10 mL/min. The module features the full set of collection modes and is compatible with a wide variety of trigger sources. SBS plates and four different tube sizes with various lengths are supported.
Features&Benefits:
- Integration of all standard collection modes and compatibility to multiple trigger sources provides compatibility with existing purification methods
- Compact, closed design offers up to 216 fractions in vials or 384 fractions in SBS plates within small dimensions to save valuable bench space
- Integrated delay volume sensor and automated calibration procedure ensure optimized sample recovery
- Preconfigured tubing kits allow easy setup and provide optimized substance recovery with minimized peak dispersion at any flow rate
- Module offers clustering functionality for easy enhancement of available fraction capacity to double or triple
- Rapid vessel-to-vessel movement minimizes substance loss during movement between fraction vessels
Physical Specifications:
- Weight:13.5 kg (29.8 lbs)
- Dimensions (height × width × depth): 200 x 345 × 440 mm (8 x 13.5 × 17 inches)
- Line voltage:100 – 240 V~, ± 10 %
- Power consumption: 200 VA / 180 W
- Ambient operating temperature: 4 – 40 °C (41 – 104 °F)
- Ambient non-operating temperature: -40 – 70 °C (-40 – 158 °F)
- Humidity: < 95 %, at 25 – 40 °C (77 – 104 °F)1
- Operating altitude: Up to 3000 m (9842 ft)
- Non-operating altitude: Up to 4600 m (15092 ft)
Performance Specifications:
- Delay Volume (in µL):
- Fraction collector inlet to diverter valve: ~50 (typical, depends on length of the tubing)
- Diverter valve: ~15
- Diverter valve to needle: ~10
- Needle: ~4
- Minimum system flow: Depending on the recommended flowrates of the installed tubing kit
- Maximum system flow: 10 mL/min
- Diverter valve: 3/2 valve, with switching time < 100 ms
- Maximum pressure: 6 bar at the diverter valve during switching
- Maximum collection volume:
- ~20 mL with 30 x 48 mm (OD x L) tube
- ~30 mL with 30 x 75 mm (OD x L) tube
- Maximum capacity: 3 fraction collectors in parallel plus one recovery fraction collector
- Cooling: Optional (with additional G1330B), performance depending on ambient conditions and the volume of collected fractions
- Trigger modes:
-
- Time slices
- Peak (threshold, up- / downslope)
- Timetable (combination of time intervals and peak)
- Manual trigger (supported only with Agilent Instant Pilot G4208A)
- Trigger Sources:
-
- G7115A, 1260 Infinity II DAD
- G7165A, 1260 Infinity II MWD
- G7114A, 1260 Infinity II VWD
- G6120BA, LC/MS Single Quad VL
- G6130BA, LC/MS Single Quad SL
- G7121A, 1260 Infinity II FLD
- G4260B, 1260 Infinity II ELSD
- G7162A, 1260 Infinity II RID
- Other detectors can be used but are not supported for fraction collection.
- Plates/Trays:
-
- 4 x well-plates full tray (MTP)1
- 2 × well-plates std. tray + 10 funnels with external containers1
- (+ 1 half
- tray)
- 2 × well-plates std. tray (MTP) + 10 × 2 mL vials1
- (+ 1 half tray)
- 100 x 2 mL in std. tray (+ 1 half tray)1
- 3 x 40 x 2 mL in half tray1
- 3 x 40 funnels in half tray
- 3 x 15 x 6 mL in half tray1
- Full tray with 40 test tubes (30 mm OD, max. height 48 mm, ~20 mL / tube)
- Full tray with 60 test tubes (25 mm OD, max. height 48 mm, ~15 mL / tube)
- Full tray with 126 test tubes (16 mm OD, max. height 48 mm, ~11 mL / tube)
- Full tray with 215 test tubes (12 mm OD, max. height 48 mm, ~8 mL / tube)
- Installed trays are automatically detected and identified.
- In operation mode “Needle into location” installed plates and vials can be
- detected.
- Only one type of well-plates can be used at a time in one tray
- Fraction Containers:
-
- 30 x 48 mm (OD x L) tubes, ~20 mL / tube
- 25 x 48 mm (OD x L) tubes, ~15 mL / tube
- 16 x 48 mm (OD x L) tubes, ~11 mL / tube
- 12 x 48 mm (OD x L) tubes, ~8 mL / tube
- Vials, well plates, capped vials, and well plates with closing mats can be
- used as recommended by Agilent Technologies
- Maximum tube height: 75 mm with short needle assembly G1364-87202
- Instrument Control:
- LC and CE Drivers A.02.17 or above
- Instrument Control Framework (ICF) A.02.04 or above
- Instant Pilot (G4208A) with firmware B.02.22 or above
- Lab Advisor B.02.10 or above