Used Lab Equipment

Specifications

• Temperature Range: 5C above ambient to +60C
• Temperature Uniformity: ±0.3C at 37C
• Interior Construction: Shiny stainless steel
• Interior Volume: 29 cu.ft. (821.2 liters)
• Interior WxHxD: 31.0" X 60.0" X 27.0" (78.7cm. X 152.4cm. X 68.6cm.)
• Exterior WxHxD: 38.0" X 80.0" X 33.0" (96.5cm. X 203.2cm. X 83.8cm.)
• Humidity System: 4 gal. (15.1liter) tank
• Humidity Ranges: Off, med. >80%, high >90%
• CO2 Sensor: Thermal Conductivity (T/C)
• CO2 Range: 0-20%

Specifications

• Temperature Range: 5C above ambient to +60C
• Temperature Uniformity: ±0.3C at 37C
• Interior Construction: Shiny stainless steel
• Interior Volume: 29 cu.ft. (821.2 liters)
• Interior WxHxD: 31.0" X 60.0" X 27.0" (78.7cm. X 152.4cm. X 68.6cm.)
• Exterior WxHxD: 38.0" X 80.0" X 33.0" (96.5cm. X 203.2cm. X 83.8cm.)
• Humidity System: 4 gal. (15.1liter) tank
• Humidity Ranges: Off, med. >80%, high >90%
• CO2 Sensor: Thermal Conductivity (T/C)
• CO2 Range: 0-20%

Description:

The Thermo Forma Model 4535 Incubator Shaker is a large-capacity environmental shaker that allows for uniform heating and motion and accurate regulation of shaking speed. This equilibration creates faster operation and enhances the productivity of laboratories with shaking requirements. The Forma 4535 is designed to accommodate a wide variety of flasks, tubes, and other glassware. Program and store up to three user-defined combinations for ease of use and quick parameter recovery.

Specifications:

• Max Speed: 525 RPM
• Shaking Accuracy: ± 1 RPM
• Max Temperature: 60°C
• Temperature Control: ± 0.1°C
• Temperature Uniformity: ± 0.2°C
• Orbital Diameter: 1 inch
• Timer: 5 min to 199.99 hours / hold
• Dimensions (H x W x D): 40.5 x 26 x 45 in
• Power Requirements: 115 V, 60 Hz, 8.6 A

Dual IR stacked water-jacketed CO2 incubator. Microprocessor control maintains and displays temperature and CO2 levels with exceptional precision, stability & uniformity. Patented recovery system with internal air heater and fan restores set-point conditions up to 3 times faster than conventional water-jacketed CO2 incubators. Insulated triple-wall construction and low-power heater in the outer doors keep thermal loss to a minimum while minimizing condensation on the inner glass doors.

Specifications:

• Chamber Volume: 5.4 cubic feet

• Internal Dimensions: 43.9 x 44.5 x 63.5 cm

• CO2 Range: 0 - 20%

• Temperature Uniformity: +/- 0.25°C

• External Dimensions: 68.6 x 62.3 x 85.7 cm

• Power Requirements: 120V, 50/60Hz, 9.4A. 1100W

Features:

Dual IR stacked water-jacketed CO2 incubator. Microprocessor control maintains and displays temperature and CO2 levels with exceptional precision, stability & uniformity. Patented recovery system with internal air heater and fan restores set-point conditions up to 3 times faster than conventional water-jacketed CO2 incubators. Insulated triple-wall construction and low-power heater in the outer doors keep thermal loss to a minimum while minimizing condensation on the inner glass doors. User friendly features include front panel calibration and diagnostics, software lock to prevent inadvertent changes to set-points, audio/visual deviation alarms, low-water indicator and over-temperature safety switch.

Specifications:

• Dual Chamber
• Catalog Number: TC Sensor 51200065 
• Chamber Volume:10.8 cu.ft/307.0 liters 
• Chamber Dimensions (L x W x H): 17.3 x 17.5 x 25 in. 
• Exterior Dimensions (L x W x H): 27.8 x 24.5 x 67.2 in
• CO2 Range:
  • Control Stability Uniformity:0 to 20.0%, 0.1%, ±0.1%, ±0.25%, 0 – 20.0%

Description:

The Napco microprocessor controlled CO2 incubator maintains and displays chamber temperature and CO2 levels with exceptional precision, stability and uniformity. Features front panel calibration and diagnostics, software lock to prevent inadvertent changing of set-point conditions, audio-visual alarms, low water indicator, automatic shuttle valve to switch to a second CO2 tank when the first is empty, rear access port and auxiliary power outlet and over-temperature safety switch. Chamber is 5.4 cu. ft. The temperature range is 5°C above ambient to 50°C±0.1°C. CO2 range is 0-20%.

Specifications:

• Dimensions (W x D x H): 24.5” x 29” x 36”
• Electrical Requirements: 115 V, 50/60 Hz, 9 A, 1040 W

Description:

With average temperature uniformity of ±0.3°C (±0.5°C absolute), these incubators operate within much tighter tolerances than gravity convection incubators.
Built-in PID microprocessor-based controller for close uniformity with set temperatures
Can set temperatures up to 75°C in 0.1°C increments using the keys on the control panel
Actual temperature is displayed (to the nearest 0.1°C) on the bright, three-digit LED display
If actual temperature exceeds setpoint by 3°C, a visual alarm will signal on the control panel
Tempered glass inner door to view samples
Temperature recovery is within two minutes
Heavy-duty steel/aluminum exterior; stainless-steel interior surrounded by 3 in. thick (7.6cm) insulation in the walls and 1.5 in. (3.8cm) in the door
5-amp electrical outlet to support other apparatus

Specifications:

Temperature range: 5 to 75°C
Capacity: 3.8 cu ft, 96.3L
Material: Steel/aluminum
Interior Dimensions: 17 x 18 x 19 in.
Exterior Dimensions: 26 x 23.5 x 33 in.

Description:

Designed to provide a clean chamber with removable shelves and unique miter-coved corners that can be easily decontaminated. Continuous chamber circulation through HEPA filter. 3-digit LED display for temperature and CO2. Microprocessor based PID temperature control with over-temperature protection. Large 20 gallon water jacket.

Specifications:

• Temperature Range: 18°C to 50°C
• CO2 Range: 0 - 20%
• CO2 Control: 0.1%
• CO2 Uniformity: ±0.25%
• Humidity Range: Ambient to 98%
• Capacity: 5.1 cu. ft (145.5 L)
• Overall Dimensions (W x H x D): 29.6” x 23.5” x 35.5” (75 x 59.5 x 92 cm)
• Weight: 231.5 lbs. (105 kg)
• Electrical: 120 V, 800 W, 6.7 amps

This Fisher Scientific Isotemp 655D gravity-convection incubator has digital readout and steady, unobstructed airflow and efficient heating. Designed for drying & staining of slides, tissue culture work, incubation of antibody tests, curing, pharmaceutical stability tests, microbiological determinations, crystallization studies, incubation of hydroxy-steroids and similar applications. Has a tight fitting, transparent tempered inner glass door to allow you view specimens without disturbing chamber temperature.

Specifications:

• Temperature Range: 30°C - 60°C
• Temperature Uniformity:+/- 1.5°C
• Ventilation Rate:12 exchanges/hour
• Chamber Capacity:5 cubic feet
• Dimensions:20 x 24 x 20 in
• Power Requirements: 115V, 20.A

Features:

The Bellco Bench Top Incubator was designed for the incubation of cell cultures and bacteria within laboratories where space is a premium. The instrument panel is mounted on top for easy viewing and manipulation. Glass door models allow the viewing of cultures without having to open the door limiting possible contamination problems and temperature fluctuations. The convenient interior accessory outlet allows the use of Bellco 4 and 10 Position Roller Apparatus, Rockers, Shakers and Magnetic Stirrers. Optional stainless steel shelf creates additional space for storing cell culture plates and flasks.

Specifications:

• Dimensions: 35.5 x 21.3 x 30.3” (W x D x H)
• Internal capacity: Approximately 4.9 cu.ft
• Temperature control ranges: 5°C above ambient to 50°C
• Environmental conditions(operating): Indoor Use, Pollution Degree- 2, 4° to 50° C, Relative Humidity 0-90% Non-Condensing
• Environmental Conditions (non-operating): -10° to 60° C, Relative Humidity 95% max