Used Lab Equipment

The Fisher Scientific Isotemp 120 Water Bath is ideal for industrial, clinical, pharmaceutical or biomedical procedures.

Specifications:

• Temperature Range: Ambient to 100°C
• Temperature Accuracy: +/- 0.24°C
• Temperature Stability: +/- 0.5°C
• Resolution: +/- 0.1°C
• Reservoir Dimensions: 30 x 50 x 15 cm
• Overall Dimensions: 42 x 62 x 23 cm

Description:

1204 VWR water bath variable temperature with stainless steel top cover

Specifications:

• Temperature Range: 5° above ambient to 99.9°C
• Interior Dimensions: 19.5"L x 11.5"W x 6"D

Features:

VWR 1212 Water Bath, 12 liter capacity, bath chamber 11 x 12 x 6 inches, stainless steel tank and lid, heats from ambient +5°C to 99°C, 115V, 60Hz, 4A. All of our equipment will be fully tested to perform at factory specifications before being shipped.

Specifications:
• Volume: 18.5L
• Chamber Dimensions: 19 x 12 x 6 "
• Temperature: 100° C

The VWR 1224 is ideal for start-up labs looking to acquire used lab equipment while saving money on their budgets.  These water baths come equipped with a high-grade stainless steel gabled lid to allow for less condensation formed from the humidity caused by the immersed vessel.  The VWR 1224 has a built in temp sensor within the heated mat for accurate uniformity of temperature.

Specifications:

• Temperature Range: Ambient to 99.9°C
• Power Requirements:115V, 60 Hz
• Capacity: 2 L

Features:

• Digital Microprocessor Control with advanced safety over temperature protection
• L.E.D. illuminated black background with transparent PYREX dish; allows specimen to be easily seen
• A nonvolatile memory retains the last temperature set point after power off/on
• Supplied with a removable PYREX dish
• Units are certified to UL61010-1, CSA C22.2 and CE approved

Specifications:

• Injection range: 0.1 – 20 µL in 0.1 µL increments 0.1 – 40 µL in 0.1 µL increments if 40 µL loop is installed 0.1 – 120 µL in 0.1 µL increments with 1290 Infinity large volume injection kit (hardware modification required) pressure range up to 1200 bar 0.1 – 100 µL in 0.1 µL increments with 100 µL upgrade kit (G4214A) (hardware modification required) up to 600 bar

• Precision: Typically <0.25 % RSD from 5 – 20 µL, Typically <0.5 % RSD from 2 – 5 µL volume, Typically <0.7 % RSD from 1 – 2 µL volume.

• Pressure range:  Up to 1200 bar, Up to 600 bar 

• Sample viscosity range: 0.2 – 5 cp

• Sample capacity: Capacity 2 x well plates (MTP) + 10 x 2 mL vials, 108 x 2 mL vials in 2 x 54 vial plate plus 10 additional 2 mL vials, 30 x 6 mL vials in 2 x 15 vial plate, 100 Micro vial tray, plus 10 additional 2 mL vials, 54 Eppendorf tubes (0.5/1.5/2 mL) in 2 x 27 Eppendorf tube plate.

Specifications:

• Chamber Capacity: 0.4 gallon / 1.5 liters
• Temperature Display: 0 ÌŠ to 100 ÌŠ C (Thermometer)
• Maximum Temperature: 95.0 ÌŠC
• Temperature Uniformity: ±0.2 ÌŠC at 37 ÌŠC
• Temperature Sensitivity: ±0.1 ÌŠC at 37 ÌŠC
• Electrical Requirements: 120 V, 225 W, 50/50 Hz
• Dimensions (L x W x H): 6 x 11.5 x 2 in

The Fisher Scientific 202S Isotemp water bath includes a microprocessor controlled water bath and a capacity of 2 liters. Ideal for laboratory, clinical, research and pharmaceutical uses. The product comes with a built-in safety features and dual thermostats to prevent runaway. As a failsafe, the heating element will turn off as soon as waterbath dries off to avoid burning. The stainless steel material also prevents rusting and leaks.

Specifications:

• Amps/Volts: 1.7 / 115V
• Capacity: 0.52 gal, 2L
• Temperature Range: Ambient to 100 °C
• Temperature Uniformity: 0.24 °C at 37 °C
• Temperature Accuracy: ±0.5 °C at 37 °C
• Temperature Display: Celcius or Fahrenheit

Specifications

• Amperage: 5.8A
• Capacity (English): 2.64 gal.
• Length (English) Exterior: 16.53 in.
• Length (Metric) Exterior: 42cm
• Resolution (Temperature): ±0.1°C
• Temperature Stability: ±0.5°C
• Capacity (Metric): 10L
• Temperature Range (Metric): Ambient to 100°C

Microprocessor PID Control

• ±0.24°C uniformity, ±0.5°C accuracy and stability at 37°C
• Display shows °C or °F; easy to read from across the room

Safety Features

• Low profile and front-panel controls for easier access, safer operation
• Dual thermostats guard against thermal runaway
• Hinged acrylic or stainless-steel gable covers have fins that keep hands away from hot vapors
• Covers stay open at 90° or, with quick-release hinge, lift off completely for use with large glassware
• Heating elements will not burn out if bath accidentally runs dry

Construction

• Corrosion-resistant exterior with tough, easy-to-clean acrylic enamel coating
• Temperature-resistant plastic rim insulates, resists leaks, keeps its shape and won't dry out or crack like caulked seals
• Exterior stays cool even after hours of operation Deep-drawn, stainless-steel reservoirs and perforated sample trays prevent leaks, guard against rust and contamination
• Rounded reservoir corners and sample trays with finger holes allow for easy removal, make cleaning easier
• Choice of acrylic or stainless-steel covers

Model 210

• With drain pump to empty reservoir

Specifications:

• Temperature Range (Metric): Ambient to 95° or 99°C
• Voltage: 120V
• Cabinet Material: Epoxy powder-coated stainless steel
• Chamber Material: Stainless steel
• Depth (English) Interior: 6 in.
• Depth (Metric) Interior: 15.2cm
• Height (English) Exterior: 9.75 in.
• Height (Metric) Exterior: 24.8cm
• Hertz: 50/60Hz
• Length (English) Exterior: 16.2 in.
• Length (Metric) Exterior: 41cm
• Model: 282
• Shipping Weight (English): 16 lb.
• Shipping Weight (Metric): 7.3kg
• Temperature Resolution: ±0.1†°C
• Temperature Uniformity: ±0.2°C
• Wattage: 300w
• Width (English) Exterior: 8 in.
• Width (English) Interior: 6 in.
• Width (Metric) Exterior: 20.3cm
• Width (Metric) Interior: 15.2cm
• Amperage: 2.5A
• Capacity (Metric): 5.5L
• Control: Digital
• Length (English) Interior: 11.5 in.
• Length (Metric) Interior: 29.2cm
• Operating Temperature: 99.9°C
• Certifications/Compliance: UL listed
• Dimensions (L x W x H) Exterior: 16.2 x 8 x 9.75 in. (41 x 20.3 x 24.8cm)
• Electrical Requirements: 120V 50/60Hz

Ideal for industrial, clinical, pharmaceutical or biomedical applications. It contains a low profile and front panel control for easier access and safer operation. Dual thermostats guard against thermal runaway and hinged acrylic covers have fins that keep hands away from hot vapors. It is made of a corrosion resistant exterior with tough, easy to clean acrylic enamel coating.

Specifications:

• Dimensions: 10.5 in

• Resolution: +/- 0.1°C

• Capacity: 5 L

• Power Requirements: 230V, 2.5A

• Temperature Range: Ambient to 100 °C

Rugged, high-performance baths maintain water temperature from ambient to 95°C or 99.9°C (depending on model) with ±0.2°C uniformity (at 37°C) and ±0.1°C control resolution (at 37°C) with stainless-steel gable cover.

Includes: Gable cover: stainless steel for all; Diffuser shelf

• Choice of analog or digital temperature control
• Chamber capacities ranging from 1.5 to 43L
• Front-mounted controls simplify operation
• Overtemperature safety circuitry prevents thermal runaway
• Dual-chamber models have independent controls for operating at different temperatures

Specifications

• Temperature Control Resolution: ±0.1°C†
• Temperature Uniformity: ±0.2°C†
• Temperature Range: Ambient to 99.9°C
• Chamber: Stainless steel
• Cabinet: Epoxy powder-coated stainless steel
• Capacity: 3.2 gal. (12L)3
• Reservoir: L x W x D: 11.5 x 12.5 x 6 in. (29.2 x 31.7 x 15.2cm)
• Weight: 40 lb. (18.1kg)
• Electrical Requirements: 120V 50/60Hz

This Shaking Water Bath with Orbital and Reciprocating shaking is designed for a wide range of temperature-controlled shaking protocols. It features a high quality, robust design with a unique magnetically coupled shaking mechanism for maximum reliability, consistency and quiet operation. This unique shaking mechanism allows for both orbital and linear shaking in one product by simply changing the orientation of the shaking tray from one mode to the other.

Specifications:

• Temperature Range: 5 - 99°C
• Stability: +0.2°C
• Speed Range: 20 – 200 rpm
• Orbital Radius: 10 mm
• Linear Stroke Length: 20 mm
• Temperature Display Resolution: 0.1°C
• Shaking Speed Display Resolution: 1 rpm
• Overall Dimensions: 33 x 55.9 x 35.6 (WxLxH)
• Shipping Weight: 2 kg (44.5 lbs)

Specifications:

• 6.5 cu ft capacity
• Stainless steel Chamber
• TC CO2 Sensor

Available as a Single or Double Stack
Specifications:

• Capacity: 6.5 cu. ft.
• CO2 Concentration Range: 0 to 20%
• O2 Range: 0 to 20%
• Relative Humidity: Ambient to 95% at 37°C
• Humidity Pan: 3.2 qt standard
• Temperature Range: Ambient +5°C to ambient
• Temperature Uniformity: 5°C to ambient
• Chamber: stainless-steel interior

Construction:

• Durable triple-wall cabinet construction ensures optimal temperature uniformity
• Patented, heated dual pane inner glass door minimizes condensation, enables faster temperature recovery
• CFC-free foam insulated outer door (field-reversible)
• Magnetic outer door gasket
• Accessory outlet
• Alarm contacts (NO, NC, COM)

Available as a Single or Double Stack
Specifications:

• Capacity: 6.5 cu. ft.
• CO2 Concentration Range: 0 to 20%
• O2 Range: 0 to 20%
• Relative Humidity: Ambient to 95% at 37°C
• Humidity Pan: 3.2 qt standard
• Temperature Range: Ambient +5°C to ambient
• Temperature Uniformity: 5°C to ambient
• Chamber: stainless-steel interior

Construction:

• Durable triple-wall cabinet construction ensures optimal temperature uniformity
• Patented, heated dual pane inner glass door minimizes condensation, enables faster temperature recovery
• CFC-free foam insulated outer door (field-reversible)
• Magnetic outer door gasket
• Accessory outlet
• Alarm contacts (NO, NC, COM)