Used Lab Equipment

Features:

The RV is a series of oil sealed small rotary vane pumps that deliver great ultimate vacuum pressure, capability to reach high pumping speeds and superior vapour handling features with quiet operation.

Specifications:

• Operating temperature range: 12 – 40 °C
• Noise level: 48 dB(A) at 50 Hz
• Motor power 50/60Hz: 450 / 550W
• Power connector 1-ph: IEC EN 60320 C13
• Nominal rotation speed 50/60Hz: 1500 / 1800 rpm
• Oil capacity min: 0.65 litres
• Oil max: 1 litres
• Displacement :
    50Hz: 14.2 m3h-1 / 8.4 ft3min-1
    60Hz: 17 m3h-1 / 10 ft3min-1
• Speed (Pneurop 6602)
    50Hz: 12 m3h-1 / 7.1 ft3min-1
    60Hz: 14.2 m3h-1 / 8.4 ft3min-1
• Ultimate pressure: 2 x 10-3 mbar / 1.5 x 10-3 Torr
• Ultimate pressure GB I: 3 x 10-2 mbar / 2.3 x 10-2 Torr
• Ultimate pressure GB II: 6 x 10-2 mbar / 4.6 x 10-2 Torr
• Ultimate pressure with Fomblin: 2 x 10-2 mbar / 1.5 x 10-2 Torr
• Max inlet pressure for water vapour: 32 mbar / 24 Torr
• Max water vapour pumping rate – GB I: 60 gh-1
• Max water vapour pumping rate – GB II: 220 gh-1
• Max allowed outlet pressure: 0.2 bar gauge / 2.8 psig
• Max allowed inlet and gas ballast pressure: 0.5 bar gauge / 7 psig
• Recommended oil: Ultragrade 19
• Inlet flange: NW25
• Exhaust flange: NW25
• High reliability: generous lubrication of moving parts.
• Safe process and systems: fast acting inlet valve for best in class anti‑suck back protection.
• Configured to meet your vacuum needs: mode selector and two position gas ballast.
• No unplanned downtime: designed for easy maintenance.
• Better work environment: quiet running and intrusive frequencies minimised.
• Two position gas ballast: allows either 60 g/hr or a class leading 290 g/hr of water vapour to be handled.
• Universal motor: to cover the widest possible voltage and frequency range from a single variant.
• Smooth controlled inlet valve: opening by oil pressure to eliminate pressure surges.
• Rapid closing inlet valve: within 0.4 seconds of pump stopping.

Features:

The RV is a series of oil sealed small rotary vane pumps that deliver great ultimate vacuum pressure, capability to reach high pumping speeds and superior vapour handling features with quiet operation.

Specifications:

• Operating temperature range: 12 – 40 °C
• Noise level: 48 dB(A) at 50 Hz
• Motor power 50/60Hz: 450 / 550W
• Power connector 1-ph: IEC EN 60320 C13
• Nominal rotation speed 50/60Hz: 1500 / 1800 rpm
• Oil capacity min: 0.42 litres
• Oil capacity max: 0.7 litres
• Displacement:

                50Hz: 3.7 m3h-1 / 2.2 ft3min-1

                60Hz: 4.5 m3h-1 / 2.6 ft3min-1

• Speed (Pneurop 6602):

                50Hz: 3.3 m3h-1 / 2 ft3min-1

                60Hz: 3.9 m3h-1 / 2.3 ft3min-1

• Ultimate pressure: 2.0 x 10-3 mbar / 1.5 x 10-3 Torr
• Ultimate pressure GB I: 3.0 x 10-2 mbar / 2.3 x 10-2 Torr
• Ultimate pressure GB II: 1.2 x 10-1 mbar / 9.1 x 10-2 Torr
• Ultimate Pressure with Fomblin: 2 x 10-2 mbar / 1.5 x 10-2 Torr
• Max inlet pressure for water vapour: 80 mbar / 60 Torr
• Max water vapour pumping rate – GB I: 60 gh-1
• Max water vapour pumping rate – GB II: 220 gh-1
• Max allowed outlet pressure: 0.2 bar gauge / 2.8 psig
• Max allowed inlet and gas ballast pressure: 0.5 bar gauge / 7 psig
• Recommended oil: Ultragrade 19
• Inlet flange: NW25
• Exhaust flange: NW25
• High reliability: generous lubrication of moving parts.
• Safe process and systems: fast acting inlet valve for best in class anti‑suck back protection.
• Configured to meet your vacuum needs: mode selector and two position gas ballast.
• No unplanned downtime: designed for easy maintenance.
• Better work environment: quiet running and intrusive frequencies minimised.
• Two position gas ballast: allows either 60 g/hr or a class leading 220 g/hr of water vapour to be handled.
• Universal motor: to cover the widest possible voltage and frequency range from a single variant.
• Smooth controlled inlet valve: opening by oil pressure to eliminate pressure surges.
• Rapid closing inlet valve: within 0.4 seconds of pump stopping.

Features:

The RV is a series of oil sealed small rotary vane pumps that deliver great ultimate vacuum pressure, capability to reach high pumping speeds and superior vapour handling features with quiet operation.

Specifications:

• Operating temperature range: 12 – 40 °C
• Noise level: 48 dB(A) at 50 Hz
• Motor power 50/60Hz: 450 / 550W
• Power connector 1-ph: IEC EN 60320 C13
• Nominal rotation speed 50/60Hz: 1500 / 1800 rpm
• Oil capacity min: 0.42 litres
• Oil capacity max: 0.7 litres
• Displacement:

                50Hz: 3.7 m3h-1 / 2.2 ft3min-1

                60Hz: 4.5 m3h-1 / 2.6 ft3min-1

• Speed (Pneurop 6602):

                50Hz: 3.3 m3h-1 / 2 ft3min-1

                60Hz: 3.9 m3h-1 / 2.3 ft3min-1

• Ultimate pressure: 2.0 x 10-3 mbar / 1.5 x 10-3 Torr
• Ultimate pressure GB I: 3.0 x 10-2 mbar / 2.3 x 10-2 Torr
• Ultimate pressure GB II: 1.2 x 10-1 mbar / 9.1 x 10-2 Torr
• Ultimate Pressure with Fomblin: 2 x 10-2 mbar / 1.5 x 10-2 Torr
• Max inlet pressure for water vapour: 80 mbar / 60 Torr
• Max water vapour pumping rate – GB I: 60 gh-1
• Max water vapour pumping rate – GB II: 220 gh-1
• Max allowed outlet pressure: 0.2 bar gauge / 2.8 psig
• Max allowed inlet and gas ballast pressure: 0.5 bar gauge / 7 psig
• Recommended oil: Ultragrade 19
• Inlet flange: NW25
• Exhaust flange: NW25
• High reliability: generous lubrication of moving parts.
• Safe process and systems: fast acting inlet valve for best in class anti‑suck back protection.
• Configured to meet your vacuum needs: mode selector and two position gas ballast.
• No unplanned downtime: designed for easy maintenance.
• Better work environment: quiet running and intrusive frequencies minimised.
• Two position gas ballast: allows either 60 g/hr or a class leading 220 g/hr of water vapour to be handled.
• Universal motor: to cover the widest possible voltage and frequency range from a single variant.
• Smooth controlled inlet valve: opening by oil pressure to eliminate pressure surges.
• Rapid closing inlet valve: within 0.4 seconds of pump stopping.

Features:

The RV is a series of oil sealed small rotary vane pumps that deliver great ultimate vacuum pressure, capability to reach high pumping speeds and superior vapour handling features with quiet operation.

Specifications:

• Operating temperature range: 12 – 40 °C
• Noise level: 48 dB(A) at 50 Hz
• Motor power 50/60Hz: 450 / 550W
• Power connector 1-ph: IEC EN 60320 C13
• Nominal rotation speed 50/60Hz: 1500 / 1800 rpm
• Oil capacity min: 0.42 litres
• Oil capacity max: 0.7 litres
• Displacement :
    50Hz: 5.8 m3h-1 / 3.4 ft3min-1
    60Hz: 7.0 m3h-1 / 4.1 ft3min-1
• Speed (Pneurop 6602):
    50Hz: 5.1 m3h-1 / 3.0 ft3min-1
    60Hz: 6.2 m3h-1 / 3.7 ft3min-1
• Ultimate pressure: 2.0 x 10-3 mbar / 1.5 x 10-3 Torr
• Ultimate pressure GB I: 3.0 x 10-2 mbar / 2.3 x 10-2 Torr
• Ultimate pressure GB II: 1.0 x 10-1 mbar / 7.5 x 10-2 Torr
• Ultimate Pressure with Fomblin: 2.0 x 10-2 mbar / 1.5 x 10-2 Torr
• Max inlet pressure for water vapour: 50 mbar / 38 Torr
• Max water vapour pumping rate – GB I: 60 gh-1
• Max water vapour pumping rate – GB II: 220 gh-1
• Max allowed outlet pressure: 0.2 bar gauge / 2.8 psig
• Max allowed inlet and gas ballast pressure: 0.5 bar gauge / 7 psig
• Recommended oil: Ultragrade 19
• Inlet flange: NW25
• Exhaust flange: NW25
• High reliability: generous lubrication of moving parts.
• Safe process and systems: fast acting inlet valve for best in class anti‑suck back protection.
• Configured to meet your vacuum needs: mode selector and two position gas ballast.
• No unplanned downtime: designed for easy maintenance.
• Better work environment: quiet running and intrusive frequencies minimised.
• Two position gas ballast: allows either 60 g/hr or a class leading 220 g/hr of water vapour to be handled.
• Universal motor: to cover the widest possible voltage and frequency range from a single variant.
• Smooth controlled inlet valve: opening by oil pressure to eliminate pressure surges.
• Rapid closing inlet valve: within 0.4 seconds of pump stopping.

Features:

The RV is a series of oil sealed small rotary vane pumps that deliver great ultimate vacuum pressure, capability to reach high pumping speeds and superior vapour handling features with quiet operation.

Specifications:

• Operating temperature range: 12 – 40 °C
• Noise level: 48 dB(A) at 50 Hz
• Motor power 50/60Hz: 450 / 550W
• Power connector 1-ph: IEC EN 60320 C13
• Nominal rotation speed 50/60Hz: 1500 / 1800 rpm
• Oil capacity min: 0.45 litres
• Oil capacity max: 0.75 litres
• Displacement:
    50Hz: 9.7 m3h-1 / 5.7 ft3min-1
    60Hz: 11.7 m3h-1 / 6.9ft3min-1
• Speed (Pneurop 6602):
    50Hz: 8.5 m3h-1 / 5 ft3min-1
    60Hz: 10 m3h-1 / 5.9 ft3min-1
• Ultimate pressure: 2 x 10-3 mbar / 1.5 x 10-3 Torr
• Ultimate pressure GB I: 3 x 10-2 mbar / 2.3 x 10-2 Torr
• Ultimate pressure GB II: 6 x 10-2 mbar / 4.6 x 10-2 Torr
• Ultimate pressure with Fomblin: 2 x 10-2 mbar / 1.5 x 10-2 Torr
• Max inlet pressure for water vapour: 38 mbar / 28.5 Torr
• Max water vapour pumping rate – GB I: 60 gh-1
• Max water vapour pumping rate – GB II: 220 gh-1
• Max allowed outlet pressure: 0.2 bar gauge / 2.8 psig
• Max allowed inlet and gas ballast pressure: 0.5 bar gauge / 7 psig
• Recommended oil: Ultragrade 19
• Inlet flange: NW25
• Exhaust flange: NW25
• High reliability: generous lubrication of moving parts.
• Safe process and systems: fast acting inlet valve for best in class anti‑suck back protection.
• Configured to meet your vacuum needs: mode selector and two position gas ballast.
• No unplanned downtime: designed for easy maintenance.
• Better work environment: quiet running and intrusive frequencies minimised.
• Two position gas ballast: allows either 60 g/hr or a class leading 220 g/hr of water vapour to be handled.
• Universal motor: to cover the widest possible voltage and frequency range from a single variant.
• Smooth controlled inlet valve: opening by oil pressure to eliminate pressure surges.
• Rapid closing inlet valve: within 0.4 seconds of pump stopping.

The ultrasonic electronic generator transforms AC line power to a 20 KHz signal that drives a piezoelectric converter/transducer. This electrical signal is converted by the transducer to a mechanical vibration due to the characteristics of the internal piezoelectric crystals.

The vibration is amplified and transmitted down the length of the horn/probe where the tip longitudinally expands and contracts. The distance the tip travels is dependent on the amplitude selected by the user through the touch screen pad. As you increase the amplitude setting the sonication intensity will increase within your sample.

In liquid, the rapid vibration of the tip causes cavitation, the formation and violent collapse of microscopic bubbles. The collapse of thousands of cavitation bubbles releases tremendous energy in the cavitation field. The erosion and shock effect of the collapse of the cavitation bubble is the primary mechanism of fluid processing.

The probe tip diameter dictates the amount of sample that can be effectively processed. Smaller tip diameters (Microtip™ probes) deliver high intensity sonication but the energy is focused within a small, concentrated area. Larger tip diameters can process larger volumes, but offer lower intensity. 

The choices of a generator and horns/probes are matched to the volume, viscosity and other parameters of the particular application. Horns are available for both direct and indirect sonication. The Accessories section has more information on this subject.

Ultrasonic processors have proven to be highly effective for many applications including:

• Cell disruption
• Nanoparticle dispersion
• Homogenization
• Shearing DNA
• Disaggregation
• Focused cleaning
• Mixing
• Degassing
• Catalyzing reactions

This compact system is equipped with one laser, two fluorescence detectors and forward and side-scatter detectors.

Features of the S3e 488 Cell Sorter (one-laser):

• Hands-free nozzle tip alignment features the fully automatic AutoGimbal System, driven completely by software
• Simplified instrument setup fully automated drop delay calculation, stream alignment, and droplet break-off monitoring enable precise 14 color sorting with minimal training
• 2-way cell sorting sort two different defined populations at the same time
• High speed and high purity sort cells fast while maintaining high sensitivity and purity
• Intuitive interface user-friendly ProSort Software enables effortless instrument control and sort logic definition

Manufacture Specification

• Droplet frequency: 3743 kHz
• Sorting type: True jet-in-air for high-performance sorting
• Sorting rate: No hardware limitations for sort rate, limited only by droplet frequency and application
• Sorting purity: >99% pure
• Nozzle size: 100 m
• Sorting direction: 2-way sorting
• Sorting collection: Up to 5 x 5 ml sample tubes each direction
• Up to 5 x 1.5 ml tubes each direction
• Microscope slides
• 8-well strip each direction
• Lasers: Single-laser: 488 nm 100 mW
• Single-laser upgrade: 488 nm 100 mW plus 561 or 640 nm 100 mW
• Dual-laser: 488 and 561 or 640 nm 100 mW
• Tri-laser: 405, 488, and 561 or 405, 488, and 640 or 488, 561, and 640 mW 100 mW
• Detection: Forward scatter (FSC) with PMT
• Side scatter (SSC) with PMT
• Up to 4 fluorescence detectors with PMT: Minimum resolution: 0.5 m
• Sensitivity: <125 MESF for FITC and PE
• Temperature range: Sample and collection temperature control system: 437C
• Peltier solid state system
• Fluidics: Onboard fluidics and dilution of 8x sheath fluid with deionized water
• Data format: FCS 3.1

Description:

The flotation bath holds water at a constant temperature to flatten wax or resin sections prior to lifting them onto a microscope slide, and can be used for hot staining except with corrosive substances. The top rim of the unit has generous space for drying slides. The controls have been recessed to provide an added measure of safety. There is a drop-on stainless steel lid to provide a cover to the bowl when not in use. It has a deep tapered bowl made from stainless steel to offer maximum resistance against corrosion. Both the bowl and the upper casing have a matte-black PTFE coating providing visual contrast against wax sections. The lower steel casing has a resistant epoxy coating. The power cable has moduled connections at both terminals. The power inlet socket at the back of the unit has fuses on both the negative and positive lines for optimum protection.

Specifications:

• Temperature range: 30 to 65 ± 1.5 at 20 ambient

• Dimensions, external (WxDxH), mm: 275 x 325 x 107
• Dimensions, (Bowl diameter x depth) mm: 222 x 85
• Mass, kg: 3.75
• Electrical supply: 220 to 240V 50/60Hz

Features:

Four preset cycles sterilize wrapped and unwrapped instruments, glassware, and utensils. End-user customization of sterilization cycles makes the Sterilemax adaptable to most other sterilization requirements. The easy-to-read LCD allows quick visualization of sterilization and diagnostic programs, and cycle status. Exclusive only to this product, the chamber door offers three locks for your safety, which prevents the door from opening until the chamber is depressurized. Built-in water pump maintains consistent water supply and accurate steam for every cycle. The largest benchtop sterilizer chamber available in a compact table-top design. Sterilizer chambers are ASME-certified.

Specifications:

• Chamber Capacity (cu ft): 1.2Chamber
• Diameter (in): 12
• Chamber Depth (in): 18
• Min Temperature (° F): 212
• Max Temperature (° F): 275
• Min Temperature (° C): 100
• Reservoir Capacity (Liters): 6
• Max Pressure (PSI): 40
• Width (in): 23
• Height (in): 17
• Depth (in):24.5

Features:

Combine compact design with high performance, reliability and safety

Intelligent design for your professional choice.

Microprocessor control system provides nine fully automatic programs, including add water, sterilization and dry

Eight pre-installed sterilization cycles; custom cycles are not an option for the SterilElite16 or 24

Two separate water-level check mechanisms: water tank level and chamber water level

Auto dry function

Pressure door auto-lock device

Chamber protected by pressure switch and steam pressure safety valve

Vacuum/Pressure Release button cuts off the power supply, exhausts the chamber of pressure, and releases the chamber vacuum simultaneously

Indicator lights:

DOOR OPEN - Door has not been closed completely; all functions stop

LOW WATER - Water level is too low

COMPLETE - Full cycle has run properly and is complete

Specifications:

• Temperature Range (Metric): 121, 135°C

• Programmability: Auto Dry

Description:

• Reduce the risk of spills using this Thermo Scientific™ StirBuddy™ Personal Stirrer, which has a compact and space-saving design with a large, 6 ft. stirring surface.
• Adjustable 200 to 2500 rpm stir speed through solid-state speed control
• Direct-drive motor/magnet assembly stirs solutions from water to viscous 50% glycerin
• Stirrer is field recalibratable to accommodate viscous liquids and specialized vessels
• Top plate and base are made of molded thermoplastic polyester

Specifications:

• Wattage: 48 W
• Weight: 2.4 lbs. (1.2 kg)
• Height: 3 in. (7.6 cm)
• Voltage: 120 V
• Outside Diameter: 6 in. (15.2 cm)
• Hertz: 60 Hz
• Speed: 200 to 2500 rpm

Features:

The T3 portable spectrometer is a compact portable instrument based on advanced CCD detection technology.

This highly compact instrument boasts all the features of a conventional bench-top spectrophotometer including Spectrum Scanning, Photometric, Quantitative and Kinetic methods.

Due to its portable design, it is also ideal for field monitoring and on-site operations for water and food analysis.

Pre-programmed test methods including calibration data for the Spectroquant series of reagent test kits from Merck Chemicals.

• Ruggedized case
• 2GB memory for data and method storage, support USB flash memory
• Easy to use with multiple interface including USB, RS232, Ethernet
• GPS positioning and GPRS mobile wireless data transmission (by SIM card)
• Lithium battery continuously work for 6 hours after fully charged
• Measure with cuvettes, test tube or optical fiber probe, work with a number of lab supplies as optional accessories to be a mobile lab

Specifications:

• Light source: Convergent tungsten lamp, 500 hrs of service life
• Measurement modes: Spectrum scan, quantitative measurement, kinetics measurement, photometric measurement
• Monochromator: Flat-field holographic concave grating
• Detector: CCD 1L x 511 2048 pixel
• Sampling accessories: Insert optic fiber probe, 10 mm and 20 mm pathlength tips; rectangular cuvette holder; cylindrical test tube holder
• Power supply: Built-in battery, continuously work for 6 hours after being charged
• Vehicle power: supply adapter (optional)
• Batterycharger: 90-240 V
• Printer: Micro printer (optional), support USB printer (PLC language)
• Operating system: Windows embedded CE 6.0 with 2 GB memory and timing function
• Input/display: 480 x 272 colour touch operation or mouse operation
• Wavelength range: 380-800 nm

Fisher Scientific Isotemp low temperature incubators are an ideal choice for incubation above or below ambient temperature.  Low temperature, refrigerated incubators are suited to fit your application needs for BOD (biochemical oxygen demand) waste water testing, food, beverage and agricultural testing, pharmaceutical research, microbiology, yeast growth and more. 

Specifications:

• Storage Capacity: 4 cubic feet
• Temperature Range: -15°C

Features:

The Scotsman UF424A-1 is a 24” wide, undercounter ice maker with bin that makes up to 440 lbs of flake style ice with an air-cooled, self-contained condenser. The bin is fit to hold 80 lbs storage capacity. This ice maker operates at 115 Volts, 60 Hz and 1-phase.

Specifications:

• Dimensions (HxWxD): (39" x 24" x 28.5")
• Condenser Type: Air Cooled
• Installation Type: Undercounter
• 24 Hour Ice Yield: 440 lb
• Bin Storage Capacity: 80 lb
• Ice Type: Flake Ice
• Voltage: 115
• Hertz: 60
• Phase: 1
• Amps: 9.5
• Water Usage: 12 gal/100 lb
• Power Usage: 4.61 kWh/100 lb