Used Lab Equipment

Reflective white ceramic top plate resists alkalis and acids and cleans easily; drip edge guards against spills. Durable die-cast aluminum base with a built-in ring stand holder.

Specifications:

• Temperature Range: 150° to 590°C
• Power Requirements: 120V, 60Hz
• Temperature Range: 302° to 1094°C
• Speed Range: 100 – 1200 rpm
• Capacity: 25 gallons of water

Specifications:

• Max. speed/force: 6600rpm/2200xG
• Capacity: 0.2mL
• Dimensions: 6.37L x 6.25W x 4H inches
• Power: 115-240 Volt 50/60Hz
• Consumption Power: 7W

Descriptions:

• Easy to clean, durable finish
• Manual defrost
• Adjustable temperature control

Specifications:

• Temperature range:1° to 12°C Manual defrost

• Capacity: 5.5 cu. Ft.

• Hydraulic Thermostat

• Baked-on, acrylic enamel exterior

• Dimensions: 23-½ x 23-63/100 x 33-½ in

• 3 Shelves

The Fisher Scientific Isotemp Waterbath Model 10L-M has a bath volume of 10 L. It has an easy access user panel with a LCD temperature display. It can display °C or °F. And it also has a safety set dial.

Specifications:

• Bath Volume Capacity: 10 L
• Temperature Range: Ambient to5°C to 200°C

Description:

Your Fisher hotplate, stirrer and stirring hotplate are general purpose heating and/or stirring devices intended for general laboratory procedures. Three sizes are available, referring to the size of the top plate in inches: 4x4, 7x7, and 10x10. All three sizes are available as a hotplate, stirrer, or combination stirring hotplate. In addition, all three are available with a ceramic top plate. The 7x7 size is also available with an aluminum top plate. The catalog numbers above refer to the units that are available. A vessel with a flat bottom is recommended on the hotplate and stirring hotplate for ideal heat transfer. Glass containers should be made of heat resistant glass such as borosilicate. Avoid soda lime glass containers, metal containers, sandbaths, or vessels with a rim around the bottom as these could cause damage to the hot plate and stirring hot plate.

Specifications:

• 7x7 ceramic top models
• 150°C (302°F) - 540°C (1004°F)
• 100 - 1000 RPM

Features:

7 X 7 Ceramic top Hotplate Stirrer

Features:

Isotemp refrigerated, 27.3 cu ft, w/chart recorder

Specifications:

• Volts: 115
• Phase: 1
• Hz.: 60

Description:

The Fisher Scientific Isotemp 550D Economy Lab Incubator is a gravity-convection incubator that provides analog on/off control at operating temperatures ranging from 30°C to 75°C (86°F to 167°F). A safety back-up is built into the controller; if the primary heater control fails, the back-up will maintain control at 3°C above the setpoint. An alarm LED then indicates that the backup controller is operating the incubator. The incubator also features a convenience electrical outlet inside, at the lower right back panel. This incubator has a 5 cubic-ft capacity and includes 2 adjustable wire shelves.

Specifications:

• Dimensions: 23” x 24” x 39”

Provide controlled dry heat for a wide variety of clinical and general chemistry applications.

Specifications:

• Temperature Range: 5°C - 130°C
• Power Requirements: 120V, 50/60Hz

The Fisher Scientific dry bath incubator 11-718-2 features low and high temperature settings with exceptional temperature control and uniformity. The power coated steel body construction provides durability for demanding applications and the compact design saves valuable bench space.

Specifications:

• Power Requirements: 115V, 2.3A, 50/60Hz
• Temperature Range: 5°C above ambient to 130°C

The Fisher Scientific dry bath incubator 11-718-2 features low and high temperature settings with exceptional temperature control and uniformity. The power coated steel body construction provides durability for demanding applications and the compact design saves valuable bench space.

Specifications:

• Power Requirements: 115V, 2.3A, 50/60Hz
• Temperature Range: 5°C above ambient to 130°C

The Fisher Scientific dry bath incubator 11-718-4 features low and high temperature settings with exceptional temperature control and uniformity. The power coated steel body construction provides durability for demanding applications and the compact design saves valuable bench space.

Specifications:

• Power Requirements: 115V, 2.3A, 50/60Hz
• Temperature Range: 5°C above ambient to 130°C

Features:

This basic stirring hotplate is built with a ceramic top plate design which reduces chances of breakage and is resistant to acids and alkalis. It is also designed to divert spills away from the internal components for product and user safety.

Specifications:

• Controller Type: Knob
• Speed: 2500 rpm
• Voltage: 120V
• Material: Ceramic
• Surface Area: 7 x 7 in.
• Temperature Range (English): 1000°F
• Temperature Range (Metric): 538°C
• Hertz: 60Hz
• Electrical Requirements: 120V 60Hz

Specifications:

• Speed: 2500 rpm
• Temperature Range: 538°C
• Material: Ceramic
• Surface Area: 7 x 7 in.
• Electrical Requirements: 120V 60Hz
• Controller Type: Knob

The Fisher Scientific Isotemp 120 Water Bath is ideal for industrial, clinical, pharmaceutical or biomedical procedures.

Specifications:

• Temperature Range: Ambient to 100°C
• Temperature Accuracy: +/- 0.24°C
• Temperature Stability: +/- 0.5°C
• Resolution: +/- 0.1°C
• Reservoir Dimensions: 30 x 50 x 15 cm
• Overall Dimensions: 42 x 62 x 23 cm