Used Lab Equipment

Used Lab Equipment

We offer an assortment of refurbished and used Gas Chromatography solutions ranging from GC, GC Mass Spectrometers and Autosamplers and Detectors and Pumps. Some of our leading manufacturers include Agilent, Hewlett Packard/HP, Shimadzu and Tekmar.

Aliquoting Pipet Controller: 31-45 of 142

*Please Select a Category and/or Manufacturer dropdown OR Search By Model Name, # or Keyword.* Advanced Search >
VWR 1162 Heated/ Refrigerated Circulator

VWR 1162 Heated/ Refrigerated Circulator

Cambridge ID #: 14888

Specifications:

 

  • Temperature range: –20 to 100°C (–4 to 212°F)
  • Cooling capacity: 200W at 20°C (68°F), 140W at 0°C (32°F), and 100W at –10°C (14°F
  • Capacity: 6 liters (1.6 gal)
  • Heater: 1000W
  • Analog Controller
Learn More
VWR-1162-Heated--Refrigerated-Circulator-14888
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Agilent 1200 Series - G1376A HPLC Capillary Pump

Agilent 1200 Series - G1376A HPLC Capillary Pump

Cambridge ID #: 20388

The Agilent 1200 Series autosampler is designed for use with other modules of the Agilent 1200 Series LC system or with other LC systems if adequate remote control inputs and outputs are available. The autosampler is controlled from the Agilent 1200 Series control module or from the Agilent ChemStation

for LC systems.

Specifications:

  • Weight: 15.5 kg (34.2 lbs)
  • Dimensions (height × width × depth): 200 × 345 × 440 mm (8 × 13.5 × 17 inches)
  • Line voltage: 100 – 240 VAC, ±10 % Wide-ranging capability
  • Line frequency: 50 or 60 Hz, ±5 %
  • Power consumption (apparent power): 300 VA Maximum
  • Power consumption (active power): 200 W Maximum
  • Ambient operating temperature: 4 to 55 8C (41 to 131 8F)
  • Ambient non-operating temperature: -40 to 70 8C (-4 to 158 8F)
  • Humidity: < 95 %, at 25 to 40 8C (77 to 104 8F) Non-condensing
  • Operating Altitude: Up to 2000 m (6500 ft)
  • Non-operating altitude: Up to 4600 m (14950 ft) For storing the autosampler
Learn More
Agilent-1200-Series---G1376A-HPLC-Capillary-Pump-20388
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Agilent 1200 series - G2260A HPLC Preparative AutosamplerImage Coming Soon

Agilent 1200 series - G2260A HPLC Preparative Autosampler

Cambridge ID #: 16719

Specifications:

  • Pressure: Operating range 0 – 40 MPa (0 – 400 bar, 0 – 5800psi)
  • GLP features: Early maintenance feedback (EMF), electronic records of maintenance and errors
  • Communications: Controller-area network (CAN). GPIB (IEEE-448), RS232C, APG-remote standard, optional four external contact closures and BCD vial number output
  • Safety features: Leak detection and safe leak handling, low voltages in maintenance areas, error detection and display
  • Injection range:
    • 900 µl in 0.1 µl increments (recommended 1 µl increments)
    • Up to 1800 µl with multiple draw (hardware modification required)
    • Up to 5000 µl with multiple draw (hardware modification required)
  • Replicate injections: – 99 from one vial
  • Precision:
    • Typically < 0.5% RSD of peak areas from 5 – 2000 µl,
    • Typically < 1% RSD of peak areas from 2000 – 5000 µl
    • Typically < 3% RSD of peak areas from 1 – 5 µl
  • Minimum sample volume:
    • µl from 5 µl sample in 100 µl microvial
    • 1 µl from 10 µl sample in 300 µl microvial
  • Sample viscosity range: 0.2 – 50 cp
  • Sample capacity:
    • 100 × 2-ml vials in 1 tray
    • 15 × 6-ml vials in ½ tray (Agilent vials only)
  • Injection cycle time: Typically 50 s, depending on draw speed and injection volume
Learn More
Agilent-1200-series---G2260A-HPLC-Preparative-Autosampler-16719
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
VWR 1545 IncubatorImage Coming Soon

VWR 1545 Incubator

Cambridge Scientific ID #'s: 11103, 15640

Heating elements in all three walls, bottom, and door create a warm air jacket around the inner chamber to guarantee superior temperature uniformity with no hot spots. Warm air jacket design also provides quick temperature recovery—and there’s a full-length inner glass door for viewing specimens without disturbing the chamber atmosphere. No need to worry about heater element damage from spills either—the inner chamber is tack-welded, and the low-watt density heating elements are safely isolated from the work chamber.

Microprocessor controlled for easy keypad set and calibration. Temperature display may be calibrated to match a secondary thermometer. For over-temperature protection, a second, independent safety controller can be preset and has visual alarm when activated. All units are stackable without the need for spacer racks. Features through-wall access port for chart recorder. A UL-approved, vapor-tight electrical outlet is inside the sealed chamber. Adjustable leveling feet compensate for uneven surfaces. Shelves adjustable in 1.3cm (1/2") increments.

 

Features:

  • Exclusive Hybrid Heating System
  • Microprocessor Control
  • Easy Keypad Set and Calibration
  • Over-Temperature Protection
  • Access Port
  • Heated Outer Door
  • Interior Electrical Outlet
  • Stainless Steel Interior and Shelves
  • Temperature Range: 5° above ambient to 60°C
  • Uniformity: ±0.25° at 37°C
Learn More
VWR-1545-Incubator-11103
By clicking below we can further assist you with your inquiry. Inquire 2 In Stock Worldwide Shipping
Bellco 1927 Roll-In Incubator

Bellco 1927 Roll-In Incubator

Cambridge ID #: 10153

The VWR Signature Reach-In Incubators are supplied with six shelves capable of supporting the weight of benchtop instruments. The air jacket design and heated outer door allows for uniform heat throughout the incubators. They incorporate a microprocessor controller to achieve precise temperature uniformity. An independent, secondary temperature controller offers the added security of over temperature protection. The chamber floors are reinforced to support roller apparatus or shakers.
Specifications:

 

  • Exterior Dimensions: 41 x 32 x 88 in
  • Interior Dimensions: 35 x 26 x 76 in
  • Power Requirements: 120V, 50/60Hz, 16A
  • Temperature Range: 5° above ambient to 70°C
  • Volume: 40 cubic feet

 

  • Carbon Dioxide Range: 0 - 20%
Learn More
Bellco-1927-Roll-In-Incubator-10153
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
VWR 1927 Reach In Incubator

VWR 1927 Reach In Incubator

Cambridge ID #: 13927

The VWR Signature Reach-In Incubators are supplied with six shelves capable of supporting the weight of benchtop instruments. The air jacket design and heated outer door allows for uniform heat throughout the incubators. They incorporate a microprocessor controller to achieve precise temperature uniformity. An independent, secondary temperature controller offers the added security of over temperature protection. The chamber floors are reinforced to support roller apparatus or shakers.
Specifications:

 

  • Exterior Dimensions: 41 x 32 x 88 in
  • Interior Dimensions: 35 x 26 x 76 in
  • Power Requirements: 120V, 50/60Hz, 16A
  • Temperature Range: 5° above ambient to 70°C
  • Volume: 40 cubic feet

 

  • Carbon Dioxide Range: 0 - 20%
Learn More
VWR-1927-Reach-In-Incubator-13927
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Taylor Wharton 24K Cryo Storage Tank

Taylor Wharton 24K Cryo Storage Tank

Cambridge ID #: 17022

Description:

This state-of-the-art Cryogenic System can be used in either liquid or vapor phase. Worthington Industries K SERIES Cryostorage Systems are designed for applications where extremely low temperature storage of biological products is required. They are also appropriate for industrial or other applications where liquid nitrogen temperatures and high capacity are needed. The K SERIES style refrigerator is designed for, but not limited to, the laboratory environment. The standard model is equipped with a Worthington Industries approved electronic liquid level controller that will monitor and control the supply of liquid nitrogen to the unit.

Specifications:

  • Static Holding Days: 52
  • Evaporation Rate (liters/days): 7.0
  • Liquid Nitrogen Capacity - liters: 365
  • Weight Empty (lbs): 405
  • Weight Empty (kg): 184
  • Weight Full (lbs): 1046
  • Weight Full (kg): 474
  • Neck Diameter (in): 31.0
  • Neck Diameter (mm): 787
  • Overall Height (in): 44.0
  • Overall Height (mm): 111.8
  • Overall Dimensions (in): 34.0 x 38.5
  • Overall Dimensions (mm): 864 x 965
  • Usable Height - Internal (in): 29.0
  • Usable Height - Internal (mm): 737
  • Internal Diameter (in): 31.0
  • Internal Diameter (mm): 787
  • 2ml Plastic Vials: 24050
  • Number of 100/81 Cell Racks: 17
  • Number of 25 Cell Racks: 6
  • Number of Shelves: 13
  • Shape: Square
  • Dimensions: 3x3 in (76x76mm)
  • Vials per Box: 25
  • Number of ½ cc straws - (10 per goblet, 2-13mm goblets per can): 59,400
  • Roller Base: Included
  • Bag 50 ml (7 Level Rack): 805
  • Bag 250 ml (5 Level Rack): 535
  • Bag 500 ml (5 Level Rack): 475
Learn More
Taylor-Wharton-24K-Cryo-Storage-Tank-17022
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Flow Sciences 4720 Laminar Flow HoodImage Coming Soon

Flow Sciences 4720 Laminar Flow Hood

Cambridge ID #: 17222

Description:

An FS4700 series fan box consists of a motorized impeller installed in a housing with a variable speed controller. The housing is designed to fit over a HEPA filter on the inlet side and is equipped on the discharge side with a single outlet.

Learn More
Flow-Sciences-4720-Laminar-Flow-Hood-17222
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Fisher Scientific 625D Incubator

Fisher Scientific 625D Incubator

Cambridge Scientific ID #'s: 19021, 15648

 

Specifications:

  • Volume: 2.5 cu ft
  • Chamber Dimensions: 18 x 18 x 13.5 in
  • Case Material: Enamel coated Steel
  • Controller Type: Microprocessor
  • Temperature Range (Metric): 30 to 75°C
  • Material (Internal): Stainless Steel
  • Temperature Uniformity: ±0.7 at 37°C
  • Display: LED
  • Insulation: 3 in. Thick Fiberglass
  • Material: Steel
  • Resolution: 0.1°C

 

Description:

Incubators with gravity flow circulation provide accurate, efficient heating for routine laboratory procedures: drying and staining of slides, paraffin embedding, tissue culture work, incubation of antibody tests, microbiological determinations, crystallization studies and more. Electrical receptacle inside (5A at 120V) to plug in a stirrer, shaker or other apparatus.

Easy to operate

  • Microprocessor control
  • Controls are conveniently located at the top of the incubator chamber
  • Keypad with arrow keys to increase or decrease set point temperature in 0.1°C increments
  • Overtemperature value is automatically set at 3°C above setpoint
  • PID controller comes with fixed parameters so no tuning is required
  • Circuit breaker protects incubator from power surges; battery backup
  • Designed to stack two units

Big three-character LED display
  • Digits display actual temperature to nearest 0.1°C
  • Display shows current value for set point temperature
  • HEAT indicator light cycles on and off to show when incubator heaters are on
  • ALARM indicator lights up if temperature exceeds overtemperature limit; backup controller maintains temperature at 3°C above setpoint; safety backup built into software

Small, medium and large workload capacities
  • Available in three chamber capacities
  • Mounting holes at 2 in. (5cm) intervals on the chamber walls for shelf placement
  • Small incubator holds a maximum of five shelves, medium incubator holds eight, and large incubator holds eleven

Low-maintenance incubators with inner and outer doors
  • Cabinet has durable, enamel-coated steel exterior
  • Extruded aluminum trim has acrylic powder coating
  • Chamber is easy-to-clean stainless steel
  • Low-watt-density heater elements are designed for long life
  • Silicone gasket on outer door and 3 in. thick (7.6cm) fiberglass insulation throughout prevent heat loss
  • Outer door opens to 180° for unhindered access and features two grabber-type latches
  • Inner door is tempered glass
  • Steel shelves are 17.37 in. wide and 16.75 in. front-to-back (44 x 42.5cm)
  • Black synthetic rubber feet keep incubator from slipping and maintain a space between incubator and benchtop for ventilation
Learn More
Fisher-Scientific-625D-Incubator-19021
By clicking below we can further assist you with your inquiry. Inquire 2 In Stock Worldwide Shipping
Fisher Scientific 625F Forced Air Incubator

Fisher Scientific 625F Forced Air Incubator

Cambridge ID #: 15654

 

Specifications:

  • Temperature range: 5 to 75°C
  • Capacity: 2.2 cu ft, 62.6L
  • Material: Steel/aluminum
  • Interior Dimensions: 17 x 18 x 12.5 in.
  • Exterior Dimensions: 26 x 23.5 x 26 in.

 

Description:

  • With average temperature uniformity of ±0.3°C (±0.5°C absolute), these incubators operate within much tighter tolerances than gravity convection incubators.
  • Built-in PID microprocessor-based controller for close uniformity with set temperatures
  • Can set temperatures up to 75°C in 0.1°C increments using the keys on the control panel
  • Actual temperature is displayed (to the nearest 0.1°C) on the bright, three-digit LED display
  • If actual temperature exceeds setpoint by 3°C, a visual alarm will signal on the control panel
  • Tempered glass inner door to view samples
  • Temperature recovery is within two minutes
  • Heavy-duty steel/aluminum exterior; stainless-steel interior surrounded by 3 in. thick (7.6cm) insulation in the walls and 1.5 in. (3.8cm) in the door
  • 5-amp electrical outlet to support other apparatus
 
Learn More
Fisher-Scientific-625F-Forced-Air-Incubator-15654
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Fisher Scientific 637D Incubator

Fisher Scientific 637D Incubator

Cambridge Scientific ID #'s: 20223, 14176, 15649, 6736, 4192, 4471

 

Specifications:

  • Volume: 3.8 cu ft
  • Chamber Dimensions: 18 x 18 x 20 in
  • Case Material: Enamel coated Steel
  • Controller Type: Microprocessor
  • Temperature Range (Metric): 30 to 75°C
  • Material (Internal): Stainless Steel
  • Temperature Uniformity: ±0.7 at 37°C
  • Display: LED
  • Insulation: 3 in. Thick Fiberglass
  • Material: Steel
  • Resolution: 0.1°C

 

Description:

Incubators with gravity flow circulation provide accurate, efficient heating for routine laboratory procedures: drying and staining of slides, paraffin embedding, tissue culture work, incubation of antibody tests, microbiological determinations, crystallization studies and more. Electrical receptacle inside (5A at 120V) to plug in a stirrer, shaker or other apparatus.

Easy to operate

  • Microprocessor control
  • Controls are conveniently located at the top of the incubator chamber
  • Keypad with arrow keys to increase or decrease set point temperature in 0.1°C increments
  • Overtemperature value is automatically set at 3°C above setpoint
  • PID controller comes with fixed parameters so no tuning is required
  • Circuit breaker protects incubator from power surges; battery backup
  • Designed to stack two units

Big three-character LED display
  • Digits display actual temperature to nearest 0.1°C
  • Display shows current value for set point temperature
  • HEAT indicator light cycles on and off to show when incubator heaters are on
  • ALARM indicator lights up if temperature exceeds overtemperature limit; backup controller maintains temperature at 3°C above setpoint; safety backup built into software

Small, medium and large workload capacities
  • Available in three chamber capacities
  • Mounting holes at 2 in. (5cm) intervals on the chamber walls for shelf placement
  • Small incubator holds a maximum of five shelves, medium incubator holds eight, and large incubator holds eleven

Low-maintenance incubators with inner and outer doors
  • Cabinet has durable, enamel-coated steel exterior
  • Extruded aluminum trim has acrylic powder coating
  • Chamber is easy-to-clean stainless steel
  • Low-watt-density heater elements are designed for long life
  • Silicone gasket on outer door and 3 in. thick (7.6cm) fiberglass insulation throughout prevent heat loss
  • Outer door opens to 180° for unhindered access and features two grabber-type latches
  • Inner door is tempered glass
  • Steel shelves are 17.37 in. wide and 16.75 in. front-to-back (44 x 42.5cm)
  • Black synthetic rubber feet keep incubator from slipping and maintain a space between incubator and benchtop for ventilation
Learn More
Fisher-Scientific-637D-Incubator-20223
By clicking below we can further assist you with your inquiry. Inquire 6 In Stock Worldwide Shipping
Fisher Scientific 637F Forced Air Incubator

Fisher Scientific 637F Forced Air Incubator

Cambridge ID #: 15655

Description:

With average temperature uniformity of ±0.3°C (±0.5°C absolute), these incubators operate within much tighter tolerances than gravity convection incubators.
Built-in PID microprocessor-based controller for close uniformity with set temperatures
Can set temperatures up to 75°C in 0.1°C increments using the keys on the control panel
Actual temperature is displayed (to the nearest 0.1°C) on the bright, three-digit LED display
If actual temperature exceeds setpoint by 3°C, a visual alarm will signal on the control panel
Tempered glass inner door to view samples
Temperature recovery is within two minutes
Heavy-duty steel/aluminum exterior; stainless-steel interior surrounded by 3 in. thick (7.6cm) insulation in the walls and 1.5 in. (3.8cm) in the door
5-amp electrical outlet to support other apparatus

Specifications:


Temperature range: 5 to 75°C
Capacity: 3.8 cu ft, 96.3L
Material: Steel/aluminum
Interior Dimensions: 17 x 18 x 19 in.
Exterior Dimensions: 26 x 23.5 x 33 in.

Learn More
Fisher-Scientific-637F-Forced-Air-Incubator-15655
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping
Fisher Scientific 650D Incubator

Fisher Scientific 650D Incubator

Cambridge Scientific ID #'s: 15650, 20222

 

Specifications:

  • Volume: 5.0 cu ft
  • Chamber Dimensions: 18 x 18 x 26.5 in
  • Case Material: Enamel coated Steel
  • Controller Type: Microprocessor
  • Temperature Range (Metric): 30 to 75°C
  • Material (Internal): Stainless Steel
  • Temperature Uniformity: ±0.7 at 37°C
  • Display: LED
  • Insulation: 3 in. Thick Fiberglass
  • Material: Steel
  • Resolution: 0.1°C

 

Description:

Incubators with gravity flow circulation provide accurate, efficient heating for routine laboratory procedures: drying and staining of slides, paraffin embedding, tissue culture work, incubation of antibody tests, microbiological determinations, crystallization studies and more. Electrical receptacle inside (5A at 120V) to plug in a stirrer, shaker or other apparatus.

Easy to operate

  • Microprocessor control
  • Controls are conveniently located at the top of the incubator chamber
  • Keypad with arrow keys to increase or decrease set point temperature in 0.1°C increments
  • Overtemperature value is automatically set at 3°C above setpoint
  • PID controller comes with fixed parameters so no tuning is required
  • Circuit breaker protects incubator from power surges; battery backup
  • Designed to stack two units

Big three-character LED display
  • Digits display actual temperature to nearest 0.1°C
  • Display shows current value for set point temperature
  • HEAT indicator light cycles on and off to show when incubator heaters are on
  • ALARM indicator lights up if temperature exceeds overtemperature limit; backup controller maintains temperature at 3°C above setpoint; safety backup built into software

Small, medium and large workload capacities
  • Available in three chamber capacities
  • Mounting holes at 2 in. (5cm) intervals on the chamber walls for shelf placement
  • Small incubator holds a maximum of five shelves, medium incubator holds eight, and large incubator holds eleven

Low-maintenance incubators with inner and outer doors
  • Cabinet has durable, enamel-coated steel exterior
  • Extruded aluminum trim has acrylic powder coating
  • Chamber is easy-to-clean stainless steel
  • Low-watt-density heater elements are designed for long life
  • Silicone gasket on outer door and 3 in. thick (7.6cm) fiberglass insulation throughout prevent heat loss
  • Outer door opens to 180° for unhindered access and features two grabber-type latches
  • Inner door is tempered glass
  • Steel shelves are 17.37 in. wide and 16.75 in. front-to-back (44 x 42.5cm)
  • Black synthetic rubber feet keep incubator from slipping and maintain a space between incubator and benchtop for ventilation
Learn More
Fisher-Scientific-650D-Incubator-15650
By clicking below we can further assist you with your inquiry. Inquire 2 In Stock Worldwide Shipping
Fisher Scientific 650F Incubator

Fisher Scientific 650F Incubator

Cambridge Scientific ID #'s: 13971, 15656

 

Specifications:

  • Temperature range: 5 to 75°C
  • Capacity: 4.5 cu ft, 127.4L
  • Material: Steel/aluminum
  • Interior Dimensions: 17 x 18 x 25.5 in.
  • Exterior Dimensions: 26 x 23.5 x 39 in.

 

Description:

  • With average temperature uniformity of ±0.3°C (±0.5°C absolute), these incubators operate within much tighter tolerances than gravity convection incubators.
  • Built-in PID microprocessor-based controller for close uniformity with set temperatures
  • Can set temperatures up to 75°C in 0.1°C increments using the keys on the control panel
  • Actual temperature is displayed (to the nearest 0.1°C) on the bright, three-digit LED display
  • If actual temperature exceeds setpoint by 3°C, a visual alarm will signal on the control panel
  • Tempered glass inner door to view samples
  • Temperature recovery is within two minutes
  • Heavy-duty steel/aluminum exterior; stainless-steel interior surrounded by 3 in. thick (7.6cm) insulation in the walls and 1.5 in. (3.8cm) in the door
  • 5-amp electrical outlet to support other apparatus
 
Learn More
Fisher-Scientific-650F-Incubator-13971
By clicking below we can further assist you with your inquiry. Inquire 2 In Stock Worldwide Shipping
Agilent 6890 Plus Gas Chromatograph w/ 5973 Mass Spec and 7683 Autosampler GC/MS

Agilent 6890 Plus Gas Chromatograph w/ 5973 Mass Spec and 7683 Autosampler GC/MS

Cambridge ID #: 14612

Includes:

  • Agilent 6890 Plus Gas Chromatograph
  • 7683 100 Vial Autosampler with Injector Tower
  • Agilent 5973
  • Edwards RV3 Vacuum Pump
  • Computer Loaded with Chemstation Software
  • Monitor

 

Specifications:

Mass Spectrometer:  

  • Mode (standard): EI
  • Modes (optional): PCI, NCI EI with CI source
  • Ion source type: 5 - 241.5 eV
  • Ionization energy: 0 - 315 uA
  • Ionization current: 100 - 350 'C
  • Transfer line temperature: 150 - 300 'C
  • Quadrupole temperature: 150 - 200 'C
  • Mass filter: Monolithic hyperbolic quadrupole
  • Mass filter protection: Entrance lens
  • Mass range:6 - 800 amu
  • Mass resolution: Unit mass adjustable by tune
  • Mass axis stability: Better than 0.10 amu/ 48 h
  • Detector: EM with replacement horn
  • Dynamic range (electronic): 10e6
  • Scan rate (electronic): 10,000 amu/s
  • Write-to-disk: 8,000 amu/s
  • SIM: 30 ions x 50 groups
  • Pumping system: Turbomolecular pump
  • Total flow: 2 mL/min (standard turbo)

Gas Chromatograph: 

  • Automatic injector (optional): Automatic alignment, fast injection
  • Liner replacement: Compatible with optional flip-top inlet sealing system
  • Injector: Split-splitless (standard), others available
  • Oven temperature: Ambient +4 - 450 'C
  • Oven ramps / plateaus: 6-7
  • Carrier gases: Helium, hydrogen, nitrogen, argon
  • Electronic pnuematic control: Auto pressure regulation for split/splitless, septum purge
  • Carrier gas control modes: Constant pressure and flow modes; pressure and flow programmable
  • Pressure range: 0 - 100 psi (standard), 0 - 150 psi (optional) with 0.01 psi resolution, pressure and temperature corrected
  • Retention-time locking:RTL ready
  • Flow control: Compatible with optional microfluidics controller
Learn More
Agilent-6890-Plus-Gas-Chromatograph-w--5973-Mass-Spec-and-7683-Autosampler-GC-MS-14612
By clicking below we can further assist you with your inquiry. Inquire 1 In Stock Worldwide Shipping