Used Lab Equipment

Includes:

• Applied Biosystems 3730XL
• 96-Capillary
• Computer w/ Pre-loaded existing software
• Data Collections 3.0
• Warranty Period: 90 days
• Installation on site

Specifications 

• Laser: Argon-ion multi line, single mode laser: primary excitation lines 488 and 515.5nm
• Oven Temp: 18°C to 70°C
• Sample Volumes: 384 well plates = 5-30µl / 96 well plates = 10-50µl
• Plate Seal: Septa or Polypropylene heat seal
• Operating Environment: 18°C - 30°C, Humidity = 20 to 80%
• Capillary Array Lengths: 36 cm or 50 cm
• Capillary Dimensions: 150 5m o.d. / 50 5m i.d.
• Polymer Consumption
  • 36cm: approx. 200µl per run
  • 50cm: approx. 250µl per run

ABI 3730xl DNA Sequencer         

• Optics
  • In-capillary detection by dual-side illumination.
  • Multiple fiter sets: Z, E, G5, G5-RCT, Any4Dyeset, Any5Dyeset and S (optional)
  • Backside thinned CCD for maximum optical sensitivity
• Capillaries
  • Choice of capillary lengths, 36cm or 50cm
  • Dimensions: 150µm o.d./50µm i.d.
• Reagent Handling
  • Automated polymer replenishment pump for increase throughput
  • POP-7 performance robust polymer separation matrix
  • 5 sequencing run modules, 1 fragment analysis run and SNPlex run module
  • On-board reagents for up to 48-hours of unattended operation
• Performance Per Run Type  
  • LongSeq: 1152 samples per day (980 Kbases)
  • StdSeq: 2304 samples per day (1550 Kbases)
  • FastSeq: 2304 samples per day (1600 Kbases)
  • RapidSeq: 3840 samples per day (2100 Kbases)
  • GeneMapper Software
    • 4224 samples per day (92,000 genotypes)
    • 36 cm, up to 500 bp resolution with 0.15 bp sizing precision in 34 minutes

Power Requirements       

• Voltage: 200-220 volt or 230-240 volt

System Dimensions        

• Width 100 cm
• Depth 73 cm
• Height 89 cm
• Weight 180 kg

Includes Computer Loaded with 4000 Series Explorer Software Version 3.5.

The 4800 MALDI TOF/TOF Analyzer is a next-generation tandem time-of-flight MS/MS system that gives you all the advantages of MALDI in a flexible, easy-to-use, ultra-high-performance mass spectrometer.

• OptiBeam™ on-axis laser provides ten times greater sensitivity to identify and quantitate low-abundance proteins in complex biological samples.
• High-resolution precursor ion selection, enabled by the QuanTIS precursor selector, lets you detect and identify peptides that other systems miss and makes it easier for you to interpret your data by simplifying MS/MS spectra.
• Ideal solution for high sensitivity putative protein biomarker identification and quantitation.
• Fully supports LC MALDI workflows, allowing you to mass analyze without the time constraints of LC.
• Simple experiment setup and fast mass analysis maximizes laboratory productivity.
• High-energy, information-rich fragmentation patterns unavailable on other instrument platforms enable you to analyze carbohydrates, lipids, and other biological components.

Identify and Quantitate Putative Protein Biomarkers with Confidence
The 4800 MALDI TOF/TOF analyzer offers a new level of sensitivity for identifying and quantifying low abundance putative protein biomarkers. Fully compatible with novel iTRAQ™ reagents, the 4800 analyzer provides the most direct path to protein biomarker discovery. An expanded dynamic range enables high confidence identification and quantitation of low-level putative protein biomarkers in complex matrices. Powerful, easy-to-use GPS Explorer™ provides simplified, automated workflows to get you more quickly from discovery to validation.

The Only MALDI TOF/TOF™ Analyzer with On-Axis Laser Irradiation
The 4800 Analyzer is the only MALDI TOF/TOF mass spectrometer with on-axis laser irradiation, enabling sensitivity in the attamole range. Proprietary source modeling algorithms enable low ppm mass detection across the MALDI plate.

Expand Workflows, Increase Throughput
Get the speed, stability, and reliability you need to expand your current experimental workflows and add statistical significance to your experimental results. Quickly and easily increase throughput using automation features that allow you to rapidly and confidently collect the MS/MS spectra that really matter —and not waste valuable resources acquiring and evaluating those that don't.

The 7900HT Fast Real-Time PCR System is a real-time quantitative PCR system that combines 96- and 384-well plate compatibility and the TaqMan® Low Density Array with fully automated robotic loading-and now also offers optional Fast real-time PCR capability.

• Fast PCR option reduces run time to about 35 minutes in a standard 96-well format, or about 55 minutes in a 384-well plate
• Continuous wavelength detection from 500-660 nm allows the use of multiple fluorophores in a single reaction
• Measure gene expression levels, detect and quantitate pathogens, perform allelic discrimination (SNP genotyping) assays as well as score the presence of gene sequences
• 96- or 384-well plate compatibility (including the TaqMan® Low Density Array)
• Optional Enterprise edition software provides data analysis tools that support 21 CFR Part 11 guidelines providing data integrity and security
• Hands-free plate-loading and unloading provides true walkaway automation allowing you to increase your lab's productivity
• Proven assay development guidelines save time and money

Specifications:

• Calibrated Dye: SYBR® Green I, ROX™, NED™, JOE™, TAMRA™, VIC™, FAM™, TET™
• Capacity: Up to 84 x 384-well plates with optional automation accessory
• Detection Method: SYBR, Primer-Probe Detection
• Dimensions: 72 cm (W) x 84 cm (D) x 64 cm (H) (with drawer open)
• High-throughput Compatibility: High-throughput Compatible, Multiplexing
• Optics: Extended-life 488 nm argon-ion laser excitation source, No filters (CCD acts as spectrograph with continuous detection 500 -650 nm)
• Passive Reference Dye: ROX (Separate Tube), No ROX, Other Passive Reference Dye, ROX (Pre-mixed)
• Reaction Speed: Fast 
• Reaction Volume Range: 5-20 µl
• Run Time: 52 minutes (384-well in fast mode), <2 hrs (384-well in standard mode)
• Sample Ramp Rate: Fast mode: ± 3.0°C⁄sec, Standard mode: ± 1.6°C⁄sec
• Temperature Accuracy: ±0.25°C of display temperature
• Temperature Range (Metric): 4-100°C
• Temperature Uniformity: ±0.5°C
• Thermal Cycling System: Peltier-Based System
• Throughput: >5,000 real-time PCR rxns per day (384-well block and automation accessory), >10,000 endpoint PCR rxns per hour (384-well block and automation accessory)
• Weight: 114 kg (250 lbs) with automation accessory, 82 kg (180 lbs) without automation accessory
• Block Format: Interchangeable
• Dynamic Range: Up to 9 logs of linear dynamic range
• Sensitivity: Down to 10 copies

includes 1 year Service Contract, Installation, and a PM at 6 months

Method Development and Training also Available

The API 3000 LC/MS/MS System is an enhanced high performance triple quadrupole mass spectrometer with applications in protein and peptide analysis, small molecule analysis in drug metabolism and pharmacokinetic studies, and n-in-one cassette dosing analysis.

Includes:

• API 3000Mass Spectrometer, MS/MS System
• Optional Front end HPLC
• Mass Range: 50-2250da
• Windows 7 Computer loaded w/ Analyst Software 1.6

Description:

The GeneAmp PCR System 2400 has a strong performance history. To maintain the instrument in top working order it is advisable to perform routine maintenance on the instrument. Depending on the level of instrument usage, it is recommended that the following procedures be performed at least 2-4 times per year. For high end users a 3-month maintenance cycle is recommended and for lower end users a 6-month maintenance cycle is recommended.

GeneAmp PCR System 9700 is specifically designed for the amplification of nucleic acids. The GeneAmp PCR System 9700 consists of a base module and one of many interchangeable sample block modules. The 96-well GeneAmp PCR System 9700 is designed for use with 0.2 ml reaction tubes or 96-well reaction plates for all of your routine PCR applications.

Includes:

• Manuals
• Power Cord

Specifications:

• Temperature Accuracy: ± 0.25 from 35.0°C - 99.9° C
• Method Storage: Auto restart function allows for power outages and safe continuation of a PCR experiment after resumption of power
• Modified Programs: Complete PCR methods can be stored with both a user and method names and protected from unitentional modification
• Geneamp 9700 Base Module: The system stores up to 100 complete PCR methods (pre-PCR holds, PCR cycling condition and post PCR holds)
• Internal Calibration: 4°C - 99.9°C
• User Diagnostics: All system software operations are controlled with five diagnostic programs

The ProFlex 2x Flat PCR System offers a flexible configuration and control features that adapts to your research. The system is optimized for 24 20K chips for use with QuantStudio™ 3D Digital PCR system and 8 TaqMan OpenArray Genotyping plates. The product also features remote system access via a mobile app, PCR optimization with VeriFlex blocks, and interchangeable block types.

Specifications:

• Maximum block ramp rate: 1.60°C/sec 
• Temperature Accuracy: ±0.25°C (35 to 99.9°C)
• Temperature range for protocol run: 0°C to 100.0°C
• Dimensions (Height x Width x Depth): 27.2cm x 33cm x 56.5cm (10.7" x 13" x 22")
• Wight: 19.6kg (43.2lb)
• PCR Volume Range: lesser than 1 micro-liter
• Instrument Memory: USB, on-board
• Display Interface: 8/4" color TFT LCD
• Power: 100-240 V, 50-60 Hz Max: 950 W, Max Current: 12 A
• Humidity: 15% - 80% Relative Humidity, non-condensing
• Operating Temperature: 15°C to 30°C 

The ProFlex PCR System offers a flexible configuration and control features that adapts to your research. The system is optimized for 24 20K chips for use with QuantStudio™ 3D Digital PCR system and 8 TaqMan OpenArray Genotyping plates. The product also features remote system access via a mobile app, PCR optimization with VeriFlex blocks, and interchangeable block types.

Specifications:

• Maximum block ramp rate: 1.60°C/sec 
• Temperature Accuracy: ±0.25°C (35 to 99.9°C)
• Temperature range for protocol run: 0°C to 100.0°C
• Dimensions (Height x Width x Depth): 27.2cm x 33cm x 56.5cm (10.7" x 13" x 22")
• Wight: 19.6kg (43.2lb)
• PCR Volume Range: lesser than 1 micro-liter
• Instrument Memory: USB, on-board
• Display Interface: 8/4" color TFT LCD
• Power: 100-240 V, 50-60 Hz Max: 950 W, Max Current: 12 A
• Humidity: 15% - 80% Relative Humidity, non-condensing
• Operating Temperature: 15°C to 30°C 

Description:

The QuantStudio 12K Flex system is a highly flexible, comprehensive real-time PCR platform that leverages the best of Applied Biosystems real-time technology in a single instrument. The QuantStudio 12K Flex Real-Time PCR System includes easy-to-change blocks that can accommodate OpenArray plates, TaqMan array cards, 384-well, 96-well, and FAST 96-well plates allowing you to select the format that is right for your project whether it’s now or in the future, for maximum flexibility and consistency in your research. The QuantStudio 12K Flex System’s intuitive software, easy touch screen setup, automation integration, effortless block exchange, and easy-to- use OpenArray components are designed to let you get started right away and reduce hands on time. Plan for the future and save time, money, and space in your lab with the only all-in-one qPCR instrument enabling a broad range of applications with maximum throughput.

Specifications:

• High Throughput Compatibility: High Throughput-Compatible
• Reaction Volume Range: 33 nl reactions
• Type: Sample Loader

Unit was manufacturered in 2018.

Includes the following materials and consumables:

1. Accessory Kit-Starter (Cat# 4469586) – Two of these
1. 3 case lids
2. 3 plugs
3. 1 plate
4. 1 carrier
5. 1 immersion fluid
2. Accessory Kit (Cat# 4469576) – Opened
1. 4 lids
2. 4 plugs
3. 2 Carriers
4. 2 Immersion fluid
3. 384-well sample plate (Cat# 9406974) – Opened box with 5 plates
4. 384-well tips (Cat# 4457246)
5. Open Array Carrier (Cat# 446957)
6. QuantStudio 12k Flex OpenArray Calibration Starter Kit (Cat# 4478651)
1. 1 carrier
2. 2 Plaques
3. 2 syringes
4. 1 Case assemblies
5. 2 plugs

Includes Computer loaded w/ Step One Software

The StepOnePlus Real-Time PCR System is a 96-well Real-Time PCR instrument perfect for both first-time and experienced users. The StepOnePlus Real-Time PCR System can be setup in a variety of configurations and comes ready to use, out of the box, with intuitive data analysis and instrument control software. Utilizing robust LED based 4-color optical recording, the StepOnePlus Real-Time PCR System is designed to deliver precise, quantitative Real-Time PCR results for a variety of genomic research applications.

Features of the StepOnePlus Real-Time PCR System include:

• Advanced software and instrumentation for performing a wide array of genomic assays
• Sensitive 4-color optical LED recording system
• Intuitive and robust software perfect for both first-time and advanced users
• Simple and flexible instrument set-up and usage

Specifications:

• Capacity: 1 x 96-well plate, 12 x 8-tube strips, 96 x 0.1 ml tubes
• Detection Method: Primer-Probe Detection, SYBR
• Dimensions: 24.6 cm/9.7 in.(W) x 42.7 cm/16.8 in.(D) x 51.2 cm/20.2 in.(H)
• Dynamic Range: Linear Dynamic Range greater than 9 log units (detection)
• Format: 0.1 ml tubes, 8-tube strips, 96-well plate
• Green Features: Energy efficient, Fewer resources used, Sustainable disposal
• High Throughput Compatibility: Multiplexing
• Optics: 4 emission filters, Blue LED excitation source, photodiode
• Passive Reference Dye: No ROX, ROX (Pre-mixed), ROX (Separate Tube)
• Peak Block Ramp Rate: 4.6°C⁄sec
• Reaction Speed: Fast, Standard
• Reaction Volume Range: 10-30 µl (Standard curve experiments: 40 µl in standard mode is validated)
• Run Time: <2 hrs⁄run (Standard Mode), <40 min⁄run (Fast Mode)
• Sample Ramp Rate: Fast mode: ± 2.2°C⁄sec, Standard mode: ± 1.6°C⁄sec
• Temperature Accuracy: 0.25°C (35 to 95°C) of display temperature
• Temperature Range (Metric): 4-100°C
• Temperature Uniformity: 0.25°C (35 to 95°C) of setpoint/display temperature
• Thermal Cycling System: Peltier-Based System
• Weight: 24 kg (53 lbs.)

Key Features:

• The ultimate Matrix-Assisted Laser Desorption Ionization Time-of-Flight (MALDI-TOF) system provides the highest quality data
• Powerful Voyager Version 5 with Data Explorer software for flexible acquisition and data processing
• Reflectron provides high mass accuracy and post-source decay (PSD)
• Fully automated acquisition and processing of data provides higher throughput

To achieve the GloMax-20/20's high sensitivity, the luminescence channel is positioned directly below the sample well. These conditions maximize light capture. In addition, a low-noise photomultiplier tube ensures that collected light is not compromised. The dynamic range of the GloMax-20/20 is more than adequate to cover common luminescence applications, thus reducing the need to dilute samples.

Specifications:

• Detection Modes: Luminescence
• Linear Dynamic Range: >8 logs
• Read Type: Glow, Flash, Kinetic, Repeat
• Sample Format: 1.5ml microcentrifuge tubes, 35mm petri dishes
• Sample Adapter: Holds 1.5ml microcentrifuge tubes
• User Interface: Touch screen navigation and operation

Description:

Applied Biosystems’ SCOUT Column Selector is an automated multi-column switching unit for use with the BioCAD family of workstations and the INTEGRAL 100Q System. The SCOUT Column Selector allows flow to be diverted to any one of six attached columns. The SCOUT Column Selector offers increased flexibility for both systematic methods development and routine execution of experiments.

Specifications:

• Valve body/fluid paths: PEEK, carbon-filled PEEK, PTFE, or HMW polyketone
• Maximum pressure: 3,000 psi
• Back pressure: <100 psi at 60 ml/min for each line
• Column sizes: Up to 24 mm diameter and up to 30 cm length
• Plumbing: 1/16-inch Valco fittings
• Dimensions (W x L x H): 9.5 in. x 12 in. x 8 5/16 in. (24.1 cm x 30.5 cm x 21.1 cm)
• Weight: 10 lbs. (4.5 Kg)
• Power requirements: 100 V/120 V/220 V/240 V, 50/60 Hz, 1.2 amps
• Fuse rating: 2-amp SLO-BLO
• Operating temperature: 4°C to 40°C
• Operating humidity: 10 to 90% non-condensing

The CERTOMAT® RM is a powerful and robust orbital benchtop shaker for the universal use in the various tasks of biological and chemical laboratories. Its compact design and its construction features allow its placement in incubators, conditioning cabinets or in shelves of a rack. The product also features an adjustable counter weight for mass balancing of the different loads applied; for optimum compensation (minimization) of vibrations caused by different loads driven at different shaking frequencies, which can be transmitted to the shaker unit and woking place.

Specification:

• Cabinet size (W x H x D): 511 x 160 x 545 mm
• Weight (without tray): 46 kg
• Material: sheet steel case with acidproof varnish
• Max. load: depending on tray and mounting system applied
• Connector: Home-Office grounded plug, separate cable of about 3 m
• Mains supply:  230 V / 50 - 60 Hz or 115 V / 50 - 60 Hz
• Power consumption: 0.8 mA at 230 V or 1.6 A at 115 V
• Fuses: fuse links 2 x T 1 A (230 V) or 2 x T 2 A (115 V)
• Shaking frequencies: 40… 400 rpm
• Orbital motion: 25 mm or 50 mm, depending on version "as delivered“
• Rotation speed accuracy: max. Deviation ±1% from max setting
• Timer operation: 00:01 [hrs:min] – 98:59 [hrs:min] ; 99:59 [hrs:min] continuous operation
• Ambient temperature: +10 ... +60 degree C
• Ambient humidity: 10… 90%, not condensing