Used Lab Equipment

Features:

The Optima MAX and MAX-E (see Figure 1-1) microprocessor controlled tabletop ultracentrifuges generate high centrifugal forces for a variety of high-speed applications. The instrument design features a variable-frequency induction drive, the thermoelectric temperature control system, self-purging vacuum system, rotor overspeed identification system, program memory that can contain up to ten five-step programs, and a choice of acceleration and deceleration rates.

Manual and programmed operation are available. • In manual operation, you enter the individual run parameters before beginning each run. • In programmed operation, you can duplicate runs quickly and accurately by selecting one of ten programs previously entered into the program memory. Each program can contain up to five steps. User messages and/or audible signals are provided to alert you to conditions that may need attention. An optional feature of the Optima MAX or MAX-E is the RS 232C Interface Accessory, which enables it to be connected to a personal computer. Information about this feature will be supplied upon request.

Specifications:

Only values with tolerances or limits are guaranteed data. Values without tolerances are informative data, without guarantee.

Speed

• Set speed:
• Optima MAX . . . . . . 5 000 to 130 000 rpm in 1 000-rpm increments
• Optima MAX-E . . . . 5 000 to 100 000 rpm in 1 000-rpm increments
• Speed control . . . . . . . . . . . . . actual rotor speed, ±50 rpm of set speed
• Speed display . . . . . . . . . . . . actual rotor speed in 100-rpm increments above 5 000 rpm and 10-rpm increments at speeds below 5 000 rpm

Time

• Set time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . to 99 hours 59 minutes
• Time display
• Manual operation . . . . . . . . . . . . . . . indicates run time remaining
• Programmed operation . . . . . . . . . . . . . . . . time remaining in step
• Temperature
• Set temperature . . . . . . . . . . . . . . . . . . . . 0 to 40°C in 0.1° increments
• Temperature control (after equilibration). . . . . ±2°C of set temperature
• Temperature display. . . . . . . . . . . . . . . . . . . . . actual rotor temperature in 0.1° increments
• Ambient temperature range . . . . . . . . . . . . . . . . . . . . . . . . . 15 to 35°C
• Humidity restrictions. . . . . . . . . . . . . . . . . . . . . . . . <95% (noncondensing)
• Vacuum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . below 10 microns (1.34 Pa)
• Acceleration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 acceleration profiles—9 slow rates from 0 to 5 000 rpm followed by full acceleration to set speed; or maximum acceleration
• Deceleration . . . . . . . . . . . . . . . . . 11 deceleration profiles—10 slow rates n from 5 000 to 0 rpm, including coasting to a stop without brake; or full dynamic braking from set speed
• Dimensions
• Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73.7 cm (29 in.)
• Depth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58.4 cm (23 in.)
• Height. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58.4 cm (23 in.)
• Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 kg (217 lb)
• Ventilation clearances (sides and rear) . . . . . . . . . . . . . . . . 7.6 cm (3.0 in.)
• Finishes
• Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . coated polycarbonate
• Top surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . urethane paint
• Other surfaces. . . . . . . . . . . . . . . . . . . . . . . . . . . . general purpose paint
• Electrical requirements
• 100-V instrument . . . . . . . . . . . . . . . . . . . 90–110 VAC, 12 A, 50/60 Hz
• 120-V instrument . . . . . . . . . . . . . . . . . . 100–130 VAC, 12 A, 50/60 Hz
• 220/240-V instrument . . . . . . . . . . . . . . . . . 198–254 VAC, 6 A, 50 Hz
• Maximum heat dissipation into room under
• steady-state conditions . . . . . . . . . . . . . . . . . . . . . . 1750 Btu/hr (0.5 kW)
• Noise level 0.91 m (3 ft) in front of centrifuge . . . . . . . . . . . . . . . . <60 dBa
• Installation category . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . II

Pollution degree. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

The major application of this rotor is for differential centrifugation of subcellular fractions.

Specifications:

• Maximum Speed: 50,000 rpm
• Maximum RCF:302,000 xg
• k-Factor:69
• R Minimum:4 mm
• R Average: 2 mm
• R Maximum:9 mm
• Nominal Rotor Capacity:468 mL
• Capacity:12 x 39 mL
• Nominal Largest Container Dimensions: 25 x 89 mm

The major application of this rotor is for differential centrifugation of subcellular fractions.

Specifications:

• Maximum Speed: 50,000 rpm
• Maximum RCF:302,000 xg
• k-Factor:69
• R Minimum:4 mm
• R Average: 2 mm
• R Maximum:9 mm
• Nominal Rotor Capacity:468 mL
• Capacity:12 x 39 mL
• Nominal Largest Container Dimensions: 25 x 89 mm

High-throughput analytical rotor capable of analyzing 7 samples in each run up to 50,000 rpm. Made of titanium, the AN-50 Ti analytical rotor has minimal temperature fluctuations, essential to analyzing particles by analytical ultracentrifugation (AUC). AUC is used to characterize size, shape, heterogeneity, molecular weight, stoichiometry, conjugation efficiency, payload, and binding rates of proteins, nucleic acids, nanoparticles, colloids, peptides, and viral vectors.

Specifications:

• Maximum Speed: 50,000 rpm
• Maximum RCF: 600 xg
• R min: 2 cm
• R av: 5 cm
• Maximum Volume: 162 mL
• Capacity: 12 x 13.5 mL
• Tube Angle: 26 degrees
• K Factor: 78

Differential centrifugation of subcellular particles.

Specifications:

• Tube Size: 12 x 13.5 mL
• Maximum Speed: 70000 rpm
• Maximum RCF: 450000 xg

Beckman Coulter 75.Ti is used with instruments classified G, H, R, S.

Specifications:

• Maximum Speed: 75000 rpm
• Maximum RCF: 502,000 xg
• K factor: 35
• Capacity: 8 x 13.5 mL
• Nominal Rotor Capacity: 108 mL

The Beckman Coulter Allegra 21R is a compact refrigerated benchtop centrifuge. It is great for pelleting, nucleic acid precipitation, and protein extraction.

Specifications:

• Maximum Capacity: 4 x 180 mL
• Maximum RCF: 21460 xg
• Maximum Speed: 15300 rpm
• Temperature Setting: -20° to 40°C
• Dimensions: 25.2 x 16.6 x 15 in (D x W x H)
• Power Requirements: 120V, 15A, 60Hz
• Weight: 154.4 lbs 
• Run Time: 9 hours, 59 minutes

The Allegra 25R is perfect for DNA processes such as cell pelleting,isolation and purification, and post-reaction cleanup in minutes. Designed with a quiet, induction drive and interchangeable rotors accommodating labware from microplates to 500ml tubes.

Specifications:             

• Max RPM: 15,000 (fixed angle)
• Temp Range: 2º C to 40º C
• Max Force: 25,160 x g
• Timer: 9 hr 59 min, hold

Includes: Beckman GH 3.8 Rotor

Specifications:           

• Maximum Speed (rpm)
  • Fixed-Angle Rotor: 6,100
  • Swinging-Bucket Rotor: 4,730
• Maximum RCF (x g)
  • Fixed-Angle Rotor: 5,710
  • Swinging-Bucket Rotor: 4,560
• Maximum Capacity: 4 x 750 mL
• Temperature Range: NA/-5° to 25°C
• Run Time: 0 - 30 min, hold
• Drive: Direct drive with replacement brushes
• Accel/Decel Rates: 1/3
• Maximum Noise Output: < 60 dB
• Refrigeration Safety Features: Automatic door interlock, imbalance detector, self-balancing drive

Includes: Beckman GH 3.8 Rotor

Specifications:           

• Maximum Speed (rpm)
  • Fixed-Angle Rotor: 6,100
  • Swinging-Bucket Rotor: 4,730
• Maximum RCF (x g)
  • Fixed-Angle Rotor: 5,710
  • Swinging-Bucket Rotor: 4,560
• Maximum Capacity: 4 x 750 mL
• Temperature Range: NA/-5° to 25°C
• Run Time: 0 - 30 min, hold
• Drive: Direct drive with replacement brushes
• Accel/Decel Rates: 1/3
• Maximum Noise Output: < 60 dB
• Refrigeration Safety Features: Automatic door interlock, imbalance detector, self-balancing drive

Whether harvesting cells or separating blood components, Allegra X-12 Series centrifuge systems are designed to simplify your separation processes and save time.  It is ideal for strwamlining general separations, clearing debris, isolating mononuclear cells or pelleting mammalian cells.

Specifications:

• Dimensions: 24.5 x 30 x 13.5 in
• Weight: 267 lbs
• Acceleration Time: 10 acceleration rates
• Deceleration Time: 10 acceleration rates
• Electrical Requirements: 208V, 60Hz, 9A
• Maximum Speed: 10,200 rpm; 3750 rpm with swinging bucket
• Set Speed: 200 - 10,200 rpm in 10 rpm increments
• Set Temperature: 10 to 40°C in 1° increments
• Set Time: Timed up to 99 Hours
• Temperature Control: ± 2°C of set temperature (after equilibration)
• Ambient Temperature Range: 10 - 35°C
• Humidity Restrictions: < 75% (noncondensing)
• Pollution Degree: 2
• Maximum RCF: 11,400 x g with fixed-angle rotor; 3,270 x g with swinging bucket rotor
• Ventilation Clearances Required: 7.6 cm (3.0") (sides and rear)

Allegra X-15R spins samples faster with the best swinging bucket in the industry. Powerful, built in refrigeration system cools faster and maintains temperature even at maximum speed. All rotors, covers and canisters are BioCertified to contain potentially harmful aerosols and maintain lab safety. Perform filtration and concentration applications, fast and slow blood component spins and microbial cell harvesting. Save time, reduce potential for contamination and save on labware costs by centrifuging cells directly in cell culture flasks.

Specifications:

• Dimensions: 24.5 x 30 x 13.5 in
• Approximate Acceleration Time: 10 acceleration
• Approximate Deceleration Time: 11 deceleration 
• Electrical Requirements: 60Hz, 208V
• Maximum Speed Swinging Bucket Rotor: 4,750 rpm
• Maximum Speed Fixed Rotor: 10,200 rpm
• Temperature Control: -10° C to +40° C 
• Timed Run: Up to 99 hours, 59 min
• Acceleration: 10 profiles
• Deceleration: 11 profiles
• Ventilation Clearances Required: Sides and Rear: 7.6 cm (3 in)
• Maximum RCF Swinging Rotor: 5,250 xg
• MAximum RCF Fixed Rotor: 11,400 xg
• Rotor Capacity: 4 x 750 mL

Specifications:

• Maximum Speed: 15,500 rpm
• Maximum RCF: 22,065 g
• Maximum Capacity: 4 x 250 mL
• Operating Temperature: 2 to 40°C
• Timer: Up to 9 hrs., 59 min., pulse or hold
• Dimensions (with lid closed): 37H x 46W x 70.7D cm
• Weight without Rotor: 78 kg (172 lbs.)
• Electrical: 120V, 60Hz, 10.5A

The Beckman Avanti J-20 High Performance Centrifuge is a rapid solution for pelleting bacteria and other solids. Its large chamber can accommodate the Beckman J-LITE JLA-1.8000—a rotor specifically made for applications which require speedy, large-scale centrifugation. The high rotor flexibility of the Avanti J-20 makes it the ideal centrifuge for users that spin sizeable volumes using high-speed rotors. Generally, this Beckman model can reach over 51, 500 x g with various other Beckman rotors.

Integrated with a high-torque switch-reluctance (SR) Drive, the Beckman J-20 centrifuge allows users to significantly reduce processing time. The innovative “Smart FRS” (Friction Reduction System) also offers larger volumes and greater separation forces. Moreover, dynamic rotor inertia check is employed to provide proper rotor identification and maximum user safety.

Features:

• Accommodates the Beckman J-LITE JLA-1.8000
• High rotor flexibility
• High-torque switch-reluctance (SR) drive
• Smart FRS (Friction reduction system)
• Dynamic rotor inertia check

Specifications:

• Interface Method: Analog
• Length: 40 in
• Width: 28 in
• Height: 46 in
• Voltage:200/208/240 V
• Frequency: 50/60 Hertz
• Phase: 1
• Current: 24 Amp
• Estimated Shipping Weight: 628 lbs.