Used Lab Equipment

The Decloaking Chamber is a programmable benchtop pressure cooker intended for laboratory use. It is programmed to allow the precise pressurized heating necessary for antigen retrieval and also has the capability to perform at a variety of temperatures ranging from 37 °C to 125 °C. The Decloaking Chamber is an excellent tool for heat-induced epitope-retrieval (HIER) methods. The proper use of heat and pressure in conjunction with the appropriate buffer solutions is of the utmost importance for consistent immunohistochemistry (IHC) staining. The Decloaking Chamber is designed to optimize and standardize antibody staining procedures and has been engineered to pass strict laboratory safety requirements. Temperature, pressure and pH can be monitored and recorded with the Decloaking Chamber to produce consistent staining, which will reduce repeat testing and false negatives.

Specification:

• Dimensions (W x D x H): 31 x 29 x 28
• Pan Capacity: 3.2 liters
• Weight: 3.7 (8.18 lbs)

Designed for sterilizing laboratory and medical equipment, media and even liquids. Provides fast, safe, and dependable sterilization without any need for special plumbing or venting. Features a fast exhaust option which reduces cycle time for solid goods and a slow exhaust option which releases chamber pressure slowly and prevents boiling over of liquids. Cold air pockets are eliminated by continuous pressure purging which ensures uniform sterilization.

Specifications:

• Capacity: 23 L
• Cassettes Capacity: 3 Full, 3 Half
• Temperature Range: 105° to 137°C
• Dimensions: 20” x 21.6” x 14” in. (W x D x H)
• Cold Cycle Time: 14 min
• Hot Cycle Time: 11 min
• Number of Trays: 4
• Tray Dimensions: 6.6” x  16” x 0.78” in. (W x D x H)
• Timer: 60 mins
• Sterilization Time: 0 to 59 mins
• Pressure: 0 to 40 psi
• Drying Time: 0 to 99 mins
• Chamber Dimensions: 10” x 18” in. (Diameter x Depth)

Description:

Purifier Vertical Clean Benches direct HEPA-filtered air downward over the work area to provide ISO Class 5 (formerly Class 100) conditions and protect your work from particulate contamination. Applications for clean benches include plant tissue culture, media plate preparation, electronics inspection, medical device assembly and pharmacy drug preparation. Because they do not provide protection to the user, they should not be used in conjunction with biohazardous material, toxins or radionuclides.

Specifications:

• Weight: 125.0 lbs (57.0 kg)
• Dimensions (W x D x H): 24" x 28.6" x 36.8"
• Electrical: 115 volts, 60 Hz, 5 A
• Laminar Flow: Vertical
• Nominal Width: 2'
• Conformance: CAN/CSA C22.2, UL, UL Standard 3101-1/61010-1
• Nominal downflow velocity of 45-65 fpm
• Aerodynamic air foil
• Supply HEPA filter, 99.99% efficient on particles 0.3 micron
• ISO Class 5 air (formerly Class 100 per Federal Standard 209E)
• Variable speed built-in blower with motorized impeller and solid state control rated for 10 amps
• Intrinsically-sound, negative pressure design
• Minihelic pressure gauge
• Air diffuser
• UV-resistant, glacier white and gray, powder-coated aluminum and steel construction
• UV-opaque and resistant 1/4" thick tempered safety glass sash and sides
• Fluorescent lamp
• Light and blower switches
• 9.4" high sash opening
• Ergonomic 10° angled and hinged sash that pivots upward, locks to a loading height of 20" and has wiping seals to promote ISO Class 5 conditions

Features:

The Motic BA210 Trinocular is designed to be used as an educational microscope in the life science and medical fields and also supports various biological applications. It features a new generation of EF-N Plan Achromatic objectives to provide a fully corrected intermediate image for crisp and clear visual and digital results. It also features the improved CCIC infinity which makes it easy to perform dark field, and polarization microscopy.

Specifications:

• Trinocular Siedentopf 30° inclined head: for comfortable viewing while seated, rotates 360°
• Light split ratio: 100:0/20:80
• Interpupillary distance adjustment: between 55-75mm
• Widefield eyepieces: N-WF10X/20mm with diopter adjustment on both eyepieces
• Reversed quadruple nosepiece: with click stops for precise magnification changes
• CCIS EF-N Plan Achromatic objectives: 4X/0.10, 10X/0.25, 40X/0.65 – Spring, 100X/1.25 – Spring/Oil
• Coaxial coarse and fine focusing system: with 2 micron minimum increment with tension adjustment
• Vertical travel range: 25mm
• Large 140mm X 135mm mechanical stage: with low-position coaxial controls
• Travel range: 76 X 50mm
• Focusable Abbe condenser: N.A. 1.25 with iris diaphragm and slider slot
• Collector lens assembly: with screw-on filter holder
• Quartz Halogen illumination: 6V/30W with intensity control

Description:

The Mitsubishi CP700DU (CP-700DU) digital, roll-type dye sublimation color printer offers high speed and superior color resolution at a low operating cost. Low media cost combined with exceptional print capacity results in unmatched price and performance. The Mitsubishi CP700DU (CP-700DU) digital printer comes with a Centronics Parallel Interface and a MS-Windows 95/98 driver (Macintosh chooser level driver is optional). It is an excellent choice for a variety of demanding, high resolution applications such as medical, digital photography, security, amusement, and industrial inspection.

Specifications:

• Printer Type: Color
• Dimensions: 11.0 x 15.7 x 5.9 inches (280 x 399 x 150 mm)
• Printer Gradation: No
• Power Requirements: AC 120 V 50/60 Hz
• Print Speed: S size - Approx. 25 seconds, L size - Approx. 39 seconds
• Printer Driver Software: No
• Printing Method: Dye sublimation thermal transfer
• Printer Resolution: 1340 x 1024 dots
• Safety Compliance: UL544 approved

Excellent choice for clinical and medical purposes, as well as scientific research. This microscope can be set up to meet a multitude of different applications based on the end user's specific needs.

Specifications:

• Objective: CF160
• Objectives: Field number 22 (with ergonomic tube/binocular tube/cytodiagnostic unit), 25 (with trinocular eyepiece tube T/F)
• Nosepiece: Sextuple
• Average Lamp Life: 100 Hrs
• Lamp Type: Halogen Lamp
• Drive System: Manual Coarse
• Stroke: 2 mm upward, 28 mm downward
• External dimensions: 184 (W) x 358 (H) x 383 (D) mm
• Weight: 9 kg

Description:

The Thermo IEC Centra-GP8 series are general purpose centrifuges designed for use in medical, industrial and scientific laboratories. The Centra-GP8 series can develop a maximum relative centrifugal force of 4630 times gravity using the 822A rotor. The centrifuges will accommodate a range of centrifuge tubes and devices including 750 mL bottles, microplates, cytological slide carriers, and microsample tubes. Maximum sample load is 3 Liters. The Thermo IEC Centra-GP8 has an ergonomic touchpad control panel with bright , easily read LED displays. The unit can be operated in manual mode, hold or one of the 35 programmable operations.

Features:

• Forces up to 4,630 Times Gravity
• Speeds up to 5,600 rpm
• 3-liter Capacity
• Speed Accuracy up to ±10 rpm
• Coast Mode
• Quiet Operation

Description:

The sliding microtome HM 450 from Thermo Scientific is a highly efficient instrument with specimen retraction during return travel. It can be used for sectioning paraffin in the routine lab. The main applications are in human and veterinary medicine. Moreover, the sliding microtome can be used for the specimen preparation in the medical and industrial research. Large and hard specimens from pharmaceuticals industry or from quality assurance labs can also be sectioned. The cross roller bearings on sledge and block allow non-tiring working and a smooth sliding movement with optimal stability. The HM 450 will cut sections from 0 µm to 100 µm. The specimen clamping can be moved up and downwards via the two arrow-shaped coarse feed buttons on the left side of the instrument. This way, specimen and knife edge distance can be adjusted quickly. The knife carrier is designed so the knives can be easily clamped in place and adjusted. The coaxial specimen orientation allows orientation with one hand.

Specifications:

• Power requirements: 100 V, 0.5 A, 50/60 Hz
• Pollution degree: 2
• Overvoltage category: II
• Sound pressure: 39 dB(A) measured with 1 m distance to the instrument
• Dimensions (W x D x H): 370 x 460 x 320 mm
• Weight: 23 kg
• Cutting drive: manual sliding movement
• Coarse feed: electronic via stepping motor
• Feed: automatic via sliding movement or manual via feed button
• Operating conditions: + 5°C up to + 35°C

Description:

The KL 1500 LCD is the performance leader in the field of 150-watt halogen cold light sources. With its outstanding modern design combined with optimized, homogeneous light output and variable light control options, this light source has been designed for applications in Stereo Microscopy and Macroscopy in laboratory, industrial and medical applications.

Specifications:

• Dimensions (W x D x H): 200 x 265 x 170 mm
• Weight: 5 kg
• Ambient temperature: + 5°C ... + 40°C
• Relative air humidity (at 31°C ambient temperature): 85%; from 31°C to 40°C ambient temperature: decreasing linearly to 75 %
• Air pressure: 700 ... 1060 hPa

The SANYO MCO-19AIC CO2 incubator is designed for demanding and regulated
applications in the biomedical, pharmaceutical, medical research and clinical
laboratory. This incubator offers outstanding performance and advanced, multi-level
contamination control to provide the ideal solution to cell culture protocols. 

Specifications:

• Interior dimensions (W x D x H): 19.3" x 20.6" x 26.2" (490 x 523 x 665 mm)
• Exterior dimensions (W x D x H):  24.4" x 27.9" x 35.4" (620 x 710 x 900 mm)
• Volume: 6.0 cu.ft. (170 L)
• Shelves: 15/chamber, 4 supplied standard; 17" x 17" (450 x 450 mm), 15.4 lbs (7 kg) capacity
• New weight: 205 lbs (93 kg)
• Temperature control range: +5C above ambient to 50C
• Temperature control uniformity and deviation: +/-0.25C in 25C ambient, setting 37C
• Airflow: vertical airflow, contrinuous with inner door closed
• Interior humidity: 95%RH at 37C through evaporation via DHA heating system
• Temperature and CO2 control: P.I.D. setpoint resolution 0.1 degree, 0.1%
• Display: LED digital
• Data acquisition: Automatic log function of termperature and CO2
• Communications: Remote alarm contacts standard, optimal 4-20mA connection, optional PC interface
• Exterior cabinet and door (material): Galvanized steel exterior, baked-on enamel finish
• Interior and shelves: Copper-enriched stainless steel
• Inner door: Tempered glass
• Insulation: Rigid foam polyurethane
• Outer door: Reversible, heated
• Access port: Single opening with interior and exterior 30 mm non-VOC silicone stoppers
• Energy, electrical, utilities: 310W
• Maximum power consumption: 1061 BTU
• Electrical: 115V, 60Hz with NEMA 5-15 Plug provided, requires NEMA 5-15R ground receptacle
• CO2 gas connection: 4 to 6 mm inner diameter tubing
• CO2 gas pressure: nominal 4.3 PSI from two-stage CO2 regulator

The Revelation III is a best-seller into physician and veterinarian clinics, as well as universities and medical schools. The Revelation lll comes with LED illumination, for daylight color, low heat, low power consumption, and super-long bulb life (30,000). Equipped for performance, its features include titanium-finished DIN achromatic or DIN Plan optics and a 30-year anti-fungal coating. The Revelation III is the choice for superior performance at a great value!

Specifications:

• Great for doctor and vet offices
• Field-ready portable options
• 4X, 10X, 40X, 100X (oil) objectives

Hot-air sterilizer meets the criteria of a medical device with a 111-liter chamber volume. Noiseless operation with a fine patented system of forced air flow in the chamber thanks to a built-in fan eliminating “cold air” area formation. High operation comfort; precise temperature and time regulation; three preset sterilization programs. Wide range of optional equipment and accessories and output option for a printer or PC connection.

Specifications:

• Interior of stainless steel material: volume (111 l), depth (390 mm), width (540 mm), height (530 mm)
• External dimensions: depth (640 mm), diameter of the air branch outer/inner (52/49 mm), width (760 mm), height (860 (N))
• Weight: 87 kg (gross)
• Heat emission at 250 °C: 760 W
• Air exchange speed at 250 °C: 49 cca/hour
• Working Temperature (from 10 °C above ambient temp): 250 °C

Features:

The Stericell line is used for hot-air sterilization of medical devices as well as materials with pre-set temperature and time parameters. It is built to have a quiet operation and is equipped with fine patent-protected system of forced air flow in the chamber. Ideal for medical and veterinary practices, clinics and hospitals, pharmacies, and laboratories.

Specifications:

• Dimensions: depth 640 mm x diameter of the air branch outer/inner 52/49mm x 760 mm
• Tray storage area: 520 x 335 mm
• Racks: 7 max
• Maximum weight per tray: 20 kg
• Maximum weight inside the oven: 50 kg
• Working temperature (beginning of the regulation): from 10 °C above ambient temp. to °C 250 °C
• Heat emission at 250 °C: 760 W
• Air exchange speed at 250 °C: 49 cca/hour
• Electricity - mains 50/60 Hz: max. power 1,9 kW
• Nominal voltage: 230 V
• Current: 8,3 A
• Chamber volume: 111-liter
• Working temperature: from +10°C over ambient temperature up to 250°C
• Noiseless operation with a fine patented system of forced air flow in the chamber thanks to a built-in fan eliminating “cold air“ area formation
• High operation comfort; precise temperature and time regulation; three preset sterilization programs
• Suitable for hot-air sterilization at health centers for laboratory purposes; potential use as an oven
• Model with a Fuzzy logic microprocessor control system; control elements situated on a foil keyboard, process information indicated on a LED display
• Wide range of optional equipment and accessories
• Output for a printer or PC connection
• Validation possibility (IQ , OQ)