Used Lab Equipment

Specifications:

• Autosampler Thermostat
• Operating temp range: 4 to 40°C (39 to 104°F)
• Operating humidity range: < 95%, non-condensing
• Maximum Power Consumption [VA]: 260 VA
• Maximum Power Consumption [W]: 210 W
• BTU: 717

Can be sold as an individual component or as part of a complete stack

Specifications:

• Autosampler Thermostat
• Operating temp range: 4 to 40°C (39 to 104°F)
• Operating humidity range: < 95%, non-condensing
• Maximum Power Consumption [VA]: 260 VA
• Maximum Power Consumption [W]: 210 W
• BTU: 717

Can be sold as an individual component or as part of a complete stack

Specifications:

• Autosampler Thermostat
• Operating temp range: 4 to 40°C (39 to 104°F)
• Operating humidity range: < 95%, non-condensing
• Maximum Power Consumption [VA]: 260 VA
• Maximum Power Consumption [W]: 210 W
• BTU: 717

Can be sold as an individual component or as part of a complete stack

The Agilent 1200 ALS Thermostat, G1330A controls temperature for either HPLCs or fraction collectors. The ALS thermostat contains Peltier-controlled heat exchangers. A fan draws air from the area above the sample vial tray of the autosampler and is then blown through the fins of the cooling/heating module. There it is cooled or heated according to the temperature setting.

Specifications:

• Weight: 20.7 kg (45.6 lbs)
• Dimensions: 140 × 345 × 435 mm (5.5 × 13.5 × 17 inches)
• Line Voltage: 100 – 120 or 220 – 240 VAC, ± 10 % Automatic selection
• Line Frequency: 50 or 60 Hz, ± 5 %
• Power consumption Autosampler: 300 VA 
• ALS Thermostat: 260 VA

Features:

The Agilent 1290 Infinity Thermostat is designed for use with other modules of the Agilent 1200 Infinity Series or with other LC systems if adequate remote control inputs and outputs are available. The thermostat is controlled from the Agilent 1200 Infinity Series Instant Pilot or from your Agilent control software for LC systems. The specially- designed thermostattable sample trays holds either 100 × 1.8 mL vials or two wellplates and 10 × 1.8 mL vials

Specifications:

• Temperature Range: Settable from 4 °C to 40 °C in 1 ° increments
• Temperature Accuracy at Ambient
  • Temperatures < 25 °C and humidity < 50 %: 3 °C to 8 °C at a setpoint of 4 °C*
• Temperature Accuracy at Ambient Temperatures
  • temperatures  < 30 °C and humidity < 60 %: 3 °C to 9 °C at a setpoint of 4 °C*

Specifications:

• Temperature: 30° to 200°C
• Temperature Accuracy: 0.01 +/-K
• Capacity: 8L

Specification

• Refrigerant: R22
• Amount: 28 oz (794 g)
• Hot gas settings: 25 PSIG (172 kPa)

• Suction pressure at 25°C

• Suction PSIG: 76 - 89
• Discharge PSIG: 255 - 285
• Speed check: 1.9 - 2.4
• Temperature range: 5°C to 35°C
• Cooling capacity at 20°C: 4500 Watts
• Available voltage: 200 - 230V 1 Ph
• Cooling options: Air / Water

The Thermo Neslab Merlin M25 is a transportable, powerful, and extremely capable CFC- free chiller that provides users with an unchallenged level of dependability and versatility. The Thermo Neslab Merlin M25 Circulating has an extremely flexible temperature range. Because of its relatively small size and adaptable cooling range, the M25 Merlin is extremely well suited for both small and large laboratories. Along with an onboard LCD digital control and display, the M25 Merlin also features a precautionary temperature alarm to alert users whenever temperature thresholds are being reached.

Specifications:

• Temperature Range:-15°C to 35°C
• Cooling Capacity:741W, 2528 BTU/hour
• Capacity:8 L
• Dimensions:9 x 12.6 x 23.5 in
• Temperature Stability:+/- 0.1°C
• Power Requirements: 115V

Specifications:

• Capacity: 1.9L
• Temperature Range: +5°C to +35°C
• Temperature Stability:  ±0.1°C
• Cooling Capacity at 20°C: 1250W
• Cooling Capacity at 5°C: 490 W
• Maximum Flow Rate (L/min): 6.75
• Power Requirements: 115V, 60hz, 13A

Features:

•  Brinkmann Lauda WK 1200 Circulation Chiller 

Specifications:

• Working temperature range (°C): 0-40
• Temperature stability (±K): 0.5
• Cooling output at 20 °C: 1.2kW
• Pump pressure max.: 3.2 bar
• Pump flow max.: 40 L/min

Features:

• Circulation chiller
• 1-line LED display for display of actual or set temperature
• User-friendly menu guidance with simplest 3-key operation
• Electronic 2-point temperature control with hysteresis
• Safety elements for refrigerant pressure, coil temperature. Level indication
• Powerful pressure pump
• Programmable switching contact output
• Filler opening at the front, drain tap
• Automatic compressor on/off control
• Air-cooled version

Specifications:

• Working temperature range: 0 °C ... 40 °C
• Ambient temperature range: 5 °C ... 40 °C
• Temperature control: ± 0.5 °C
• Cooling output at 20 °C: 0 kW
• Pump pressure max: 1.0 bar
• Pump flow max: 30 L/min
• Filling volume max: 12 L
• Overall Dimensions (W x D x H): 350 x 480 x 595 mm

Optional Installation, Familiarization, and Extended Warranty available

Includes:

• G1322 Degasser
• G1311 Quarternary Pump or G1312A Binary Pump($1000 Less)
• G1329A Autosampler
• G1330 Autosampler Chiller
• G1316A Column Compartment
• G1315A Diode Array Detector
• Computer Loaded with ChemStation
• Monitor – Mouse – Keyboard
• Cables and Manuals

The components can be customized to your needs.

Please let me know if I can be of any additional assistance.

Specifications:

• Autosampler (Chiller Compatible)
• GLP features: Early maintenance feedback (EMF), electronic records of maintenance and errors
• Communications: Controller-area network (CAN). GPIB (IEEE-448), RS232C, APG-remote standard, optional four external contact closures and BCD vial number output
• Safety features: Leak detection and safe leak handling, low voltages in maintenance areas, error detection and display
• Injection range: 1– 100 µl in 0.1 µl increments Up to 1500 µl with multiple draw (hardware modification required)
• Replicate injections: 1– 99 from one vial
• Precision:
  • Typically < 0.5 % RSD of peak areas from 5 – 100 µl
  • Typically < 1 % RSD of peak areas from 1 – 5 µl
• Minimum sample volume: 1 µl from 5 µl sample in 100 µl microvial, or 1 µl from 10 µl sample in 300 µl microvial
• Carryover: Typically < 0.1 %, < 0.05 % with external needle cleaning
• Sample viscosity range: 2 – 50 cp
• Replicate injections per vial: 1 – 99
• Sample capacity:
  • 100 × 2-ml vials in 1 tray
  • 40 × 2-ml vials in ½ tray
  • 15 × 6-ml vials in ½ tray (Agilent vials only)
• Injection cycle time: Typically 50 s depending on draw speed and injection volume

Can be sold as an individual component or as part of a complete stack