Used Lab Equipment

Features:

• Multiple collection modes: Fluorescence, phosphorescence, chemi/bio-luminescence, and time resolved phosphorescence measurements can all be easily made without changing a single hardware component
• Lowest cost of ownership: The Cary Eclipse is so robust and reliable that every new instrument comes with a 10-year lamp life guarantee, reducing ongoing expenses to virtually zero. 
• Improved laboratory safety: Additionally the guaranteed exceptionally long lifetime of the lamp in the Cary Eclipse eliminates lamp replacements, a hugely time-consuming and potentially hazardous operation.
• Easy to use: Modular, application-specific software, which satisfies the needs of novice and expert users alike, and the ability to switch between measurement modes without touching the hardware, ensure that any user can quickly get reliable, accurate results with minimal training.
• Expand your analytical capabilities: The superior, unique design of the Cary Eclipse ensures room light immunity allowing the instrument to operate with the front and top panels removed for easy access to sample and fast installation of large accessories.
• Proven sensitivity where you need it most: Optimized design coupled with unique, high-sensitivity optics and detectors ensure that the Cary Eclipse gives you the performance that you need right across the spectrum. 
• Robustness, reliability and sensitivity: Engineered to be the most robust instrument on the market, the Cary Eclipse incorporates the unique Agilent xenon flash lamp to capture a data point every 12.5 ms and scans at 24,000 nm/min without peak shifts perfect for high throughput laboratories and fast kinetics applications.
• Unique Sampling: By incorporating Agilent’s unique capacity to guarantee room light immunity coupled with the highly accurate and reproducible Peltier temperature control, the Cary Eclipse delivers unique sampling opportunities that will expand your analytical capabilities, simplify your workflow and increase your sample throughput.
• Reliable Results: The Cary Eclipse only illuminates the sample when data is actually being acquired. This means that the Cary Eclipse prevents your valuable samples from photodegradation and preserves their integrity to the point that you can measure them over and over again and continue to get the same, reliable result. 

Specifications:

• Dimensions(WxDxH): 60 x 64 x 27 cm (23 x 25 x 10 inches)
• Sensitivity:> 500:1 RMS, 500 nm excitation, excitation and emission slits 10 nm / > 750:1 RMS, 350 nm excitation, excitation and emission slits 10 nm
• Wavelength(s):190 - 1100 nm
• Temperature Range: 10 – 35°C
• Optical System: Cerny-Turner 0.125 m Monochromators
• Light Source: Xenon Flash Lamp
• Software: Cary Eclipse Software

Includes:

• NXR FT-Raman Accessory Module )1064 nm Laser)
• Raman InGaAs Detector
• Nicolet/Nexus Series Sample Compartment Cover
• 180 Degree Reflective Sample Comp Dual Motor Assembly
• Raman Capillary Tube Holder
• FT Raman MicroStage
• Computer Loaded w/ Atlus Software, and FTIR Software

Nicolet FT-IR spectrometers from Thermo Electron Corporation are the highest performance FT-IR systems available. While the spectrometer has the power to handle the most advanced research-level experiments, routine analyses are performed just as conveniently.  Every facet of the Nicolet FT-IR spectrometer has been engineered to facilitate sample handling, introduce options to scientists, and increase laboratory throughput.

Specifications:

• Spectral Range (Standard): 7800 – 350 cm^-1
• Spectral Range (Option, CsI Optics): 6400 – 200 cm^-1
• Spectral Range (Option, Extended-Range Optics): 11000 – 375 cm^-1
• Spectral Range (Option, Multi-Range Optics): 27000 – 15 cm^-1 (Standard)
• Optical Resolution: 09 cm^-1
• Peak-To-Peak Noise (1 minute scan): < 8.68 x 10^-6 AU** (50,000:1)
• RMS Noise (1 minute scan): < 1.95 x 10-6 AU**
• Ordinate Linearity: 07 %T
• Wavenumber Precision: 01 cm
• Slowest Linear Scan Velocity: 0.158 cm/sec
• Fastest Linear Scan Velocity: 33 cm/sec
• Number of Scan Velocities: 15
• Rapid Scan (Spectra/second @ 16 cm^-1, 16 cm^-1: 65, 95
• Throughput Increase in Turbo Mode (@ 3000 cm: 25%
• Liquid Nitrogen-Cooled Detector Hold Time: 18 hours

Features:

The A3 Atomic Absorption Spectrometer is a high performance automated instrument designed to meet the requirements of the modern laboratory. Due to its versatility and performance it can be used for a wide range of applications. 

Three flame options are available to the user with the Air/Acetylene being the standard configuration. This flame can be used for nearly all standard elements while the N2O/Acetylene and the Air/LPG (natural gas) are available as an option for the more demanding of elements. All three flame configurations offer coded burner for full safety protection. 

The graphite head is fixed into the optical path to maximize performance and eliminate drift. The temperature of the transversely heated graphite tube is accurately controlled by means of a precision feedback system. Pyrolytically coated platform tubes are supplied as standard to improve the performance and eliminate many analytical problems associated with this technique. 

The flame and graphite furnace can be changed over by a simple selection in versatile AA Win Pro software.

â—† Easy to use, complete software control

â—† Integrated safety precautions for user protection

â—† Flexible configuration for a wide array of industrial apps

â—† Time-saving high speed analysis

Specifications:

Spectrometer System

• Model:Flame AA System-A3F, Graphite AA System-A3G, 

  Combined Flame and Graphite Furnace AA System-A3FG

• Wavelength range: 190-900 nm
• Light source: Hollow cathode lamp (HCL), Deuterium Arc lamp (D2)
  
• Modulation: Square wave pulse
• Modulation frequency:
  • 100 hz self reversal (SR) background
  • 400 hz Deuterium Arc (D2) background

Monochromator 

• Grating: 1800 grooves/mm diffraction grating
• Blazed: wavelength 250 nm
• Focus: 300 nm
• Bandwidth: 0.1, 0.2, 0.5, 1.0, 2.0, 5.0 nm
• Scan mode: Automatic
• Photometric type: Single beam
• Wavelength accuracy: ±0.15 nm
• Wavelength resolution: 0.2 nm±0.02 nm
• Wavelength reproducibility: <0.05 nm
• Spectral bandwidth: 0.5, 1.0, 2.0, 5.0 nm
• Baseline stability: 0.005 A/30 min
• Stray light: ≤0.12 %T (220 nm NaI, 340 nm NaNO2)

Graphite Furnace Analysis

• Graphite head: Transversally heated
• Temperature range: Ambient-2650 ℃
• Heating program: Up to 10 steps. Drying, Ashing, Atomization, Cleaning
• Feedback : Voltage and optical temperature control feedback
• Sensitivity (Cu): 50 ng/m Absorption>0.40 Abs
• Detection limit: Cd<0.004 ng/ml
• Repeatability:
  Cu<2.0 % , Cd<2.0 %
• Graphite tubes: Pyrolytically coated with platform
• Sample size: Up to 20μl
• Graphite cooling: Water circulator available

Features:

The A3 Atomic Absorption Spectrometer is a high performance automated instrument designed to meet the requirements of the modern laboratory. Due to its versatility and performance it can be used for a wide range of applications. 

Three flame options are available to the user with the Air/Acetylene being the standard configuration. This flame can be used for nearly all standard elements while the N2O/Acetylene and the Air/LPG (natural gas) are available as an option for the more demanding of elements. All three flame configurations offer coded burner for full safety protection. 

The graphite head is fixed into the optical path to maximize performance and eliminate drift. The temperature of the transversely heated graphite tube is accurately controlled by means of a precision feedback system. Pyrolytically coated platform tubes are supplied as standard to improve the performance and eliminate many analytical problems associated with this technique. 

The flame and graphite furnace can be changed over by a simple selection in versatile AA Win Pro software.

â—† Easy to use, complete software control

â—† Integrated safety precautions for user protection

â—† Flexible configuration for a wide array of industrial apps

â—† Time-saving high speed analysis

Specifications:

Spectrometer System

• Model:Flame AA System-A3F, Graphite AA System-A3G, 

  Combined Flame and Graphite Furnace AA System-A3FG

• Wavelength range: 190-900 nm
• Light source: Hollow cathode lamp (HCL), Deuterium Arc lamp (D2)
  
• Modulation: Square wave pulse
• Modulation frequency:
  • 100 hz self reversal (SR) background
  • 400 hz Deuterium Arc (D2) background

Monochromator 

• Grating: 1800 grooves/mm diffraction grating
• Blazed: wavelength 250 nm
• Focus: 300 nm
• Bandwidth: 0.1, 0.2, 0.5, 1.0, 2.0, 5.0 nm
• Scan mode: Automatic
• Photometric type: Single beam
• Wavelength accuracy: ±0.15 nm
• Wavelength resolution: 0.2 nm±0.02 nm
• Wavelength reproducibility: <0.05 nm
• Spectral bandwidth: 0.5, 1.0, 2.0, 5.0 nm
• Baseline stability: 0.005 A/30 min
• Stray light: ≤0.12 %T (220 nm NaI, 340 nm NaNO2)

Graphite Furnace Analysis

• Graphite head: Transversally heated
• Temperature range: Ambient-2650 ℃
• Heating program: Up to 10 steps. Drying, Ashing, Atomization, Cleaning
• Feedback : Voltage and optical temperature control feedback
• Sensitivity (Cu): 50 ng/m Absorption>0.40 Abs
• Detection limit: Cd<0.004 ng/ml
• Repeatability:
  Cu<2.0 % , Cd<2.0 %
• Graphite tubes: Pyrolytically coated with platform
• Sample size: Up to 20μl
• Graphite cooling: Water circulator available

Features:

The A3 Atomic Absorption Spectrometer is a high performance automated instrument designed to meet the requirements of the modern laboratory. Due to its versatility and performance it can be used for a wide range of applications. 

Three flame options are available to the user with the Air/Acetylene being the standard configuration. This flame can be used for nearly all standard elements while the N2O/Acetylene and the Air/LPG (natural gas) are available as an option for the more demanding of elements. All three flame configurations offer coded burner for full safety protection. 

The graphite head is fixed into the optical path to maximize performance and eliminate drift. The temperature of the transversely heated graphite tube is accurately controlled by means of a precision feedback system. Pyrolytically coated platform tubes are supplied as standard to improve the performance and eliminate many analytical problems associated with this technique. 

The flame and graphite furnace can be changed over by a simple selection in versatile AA Win Pro software.

â—† Easy to use, complete software control

â—† Integrated safety precautions for user protection

â—† Flexible configuration for a wide array of industrial apps

â—† Time-saving high speed analysis

Specifications:

Spectrometer System

• Model:Flame AA System-A3F, Graphite AA System-A3G, 

  Combined Flame and Graphite Furnace AA System-A3FG

• Wavelength range: 190-900 nm
• Light source: Hollow cathode lamp (HCL), Deuterium Arc lamp (D2)
  
• Modulation: Square wave pulse
• Modulation frequency:
  • 100 hz self reversal (SR) background
  • 400 hz Deuterium Arc (D2) background

Monochromator 

• Grating: 1800 grooves/mm diffraction grating
• Blazed: wavelength 250 nm
• Focus: 300 nm
• Bandwidth: 0.1, 0.2, 0.5, 1.0, 2.0, 5.0 nm
• Scan mode: Automatic
• Photometric type: Single beam
• Wavelength accuracy: ±0.15 nm
• Wavelength resolution: 0.2 nm±0.02 nm
• Wavelength reproducibility: <0.05 nm
• Spectral bandwidth: 0.5, 1.0, 2.0, 5.0 nm
• Baseline stability: 0.005 A/30 min
• Stray light: ≤0.12 %T (220 nm NaI, 340 nm NaNO2)

Graphite Furnace Analysis

• Graphite head: Transversally heated
• Temperature range: Ambient-2650 ℃
• Heating program: Up to 10 steps. Drying, Ashing, Atomization, Cleaning
• Feedback : Voltage and optical temperature control feedback
• Sensitivity (Cu): 50 ng/m Absorption>0.40 Abs
• Detection limit: Cd<0.004 ng/ml
• Repeatability:
  Cu<2.0 % , Cd<2.0 %
• Graphite tubes: Pyrolytically coated with platform
• Sample size: Up to 20μl
• Graphite cooling: Water circulator available

Features:

The AA900 Atomic Absorption Spectrometer is a versatile entry level instrument with a computer controlled Air/Acetylene flame for general laboratory requirements. Due to its high sensitivity and excellent performance the instrument can be used for a wide range of applications. The versatile instrument is available in three configurations:

AA990F-Flame atomizer only.

AA990G-Graphite furnace atomizer only. 

AA990FG-Combined with flame and graphite furnace atomizer switch aromatically. 

Common Applications include: Agricultural, Environmental, Petrochemical, Clinical.

â—† Easy-to-use automation software 

â—† Integrated safety precautions for user protection

â—† Precision accuracy with integrated correction system 

â—† Life cycle value, best choice for less than 8 elements of analysis

Specifications:

• Wavelength range: 190-900 nm

• Light source: Hollow cathode lamp (HCL), Deuterium Arc lamp (D2)

• Modulation: Square wave pulse

• Modulation frequency :

  100 Hz self reversal (SR) background,

  400 Hz Deuterium Arc (D2) background

• Monochromator

• Grating: 1800 grooves/mm diffraction grating

• Blazed wavelength: 250 nm

• Focus: 300 nm

• Bandwidth: 0.1, 0.2, 0.5, 1.0, 2.0, 5.0 nm

• Scan mode: Automatic

• Photometric type: Single beam

• Wavelength accuracy: ±0.15 nm

• Wavelength resolution: 0.2 nm±0.02 nm

• Wavelength reproducibility: <0.05 nm

• Spectral bandwidth: 0.5, 1.0, 2.0, 5.0 nm

• Baseline stability: 0.005 A/30 min

• Background correction:
  Deuterium Arc (D2) 1.0 Abs,

  Self Reversal (SR) 3.0 Abs

   

  Flame Analysis

• Flame type: Air/acetylene

• Sensitivity (Cu): 2 μg/ml Absorption>0.280 Abs

• Characteristic Concentration: Cu<0.02 μg/ml

• Detection limit: Cu<0.004 μg/ml
  Repeatability: Cu<0.7 %

• Burner head: Titanium Alloy

   

• Nebulizer:
  High–efficiency glass,

  acid proof available as an option

  Pre-mix chamber: Corrosion resistant

• Atomizer selection:

  Manual (AA990F)
  Automatic changeover (AA990FG)

• Safety features: Burner switch, flame sensor, gas leak sensor, low gas pressure sensor, drain trap sensor, power loss protection

  
  Graphite Furnace Analysis

• Graphite head: Transversally heated

• Temperature range: Ambient-2650 ℃

• Heating program: Up to 10 steps. Drying, Ashing, Atomization, Cleaning 

• Feedback: Voltage and optical temperature control feedback

• Sensitivity (Cu): 50 ng/m Absorption>0.40 Abs

Features:

The AA900 Atomic Absorption Spectrometer is a versatile entry level instrument with a computer controlled Air/Acetylene flame for general laboratory requirements. Due to its high sensitivity and excellent performance the instrument can be used for a wide range of applications. The versatile instrument is available in three configurations:

AA990F-Flame atomizer only.

AA990G-Graphite furnace atomizer only. 

AA990FG-Combined with flame and graphite furnace atomizer switch aromatically. 

Common Applications include: Agricultural, Environmental, Petrochemical, Clinical.

â—† Easy-to-use automation software 

â—† Integrated safety precautions for user protection

â—† Precision accuracy with integrated correction system 

â—† Life cycle value, best choice for less than 8 elements of analysis

Specifications:

• Wavelength range: 190-900 nm

• Light source: Hollow cathode lamp (HCL), Deuterium Arc lamp (D2)

• Modulation: Square wave pulse

• Modulation frequency :

  100 Hz self reversal (SR) background,

  400 Hz Deuterium Arc (D2) background

• Monochromator

• Grating: 1800 grooves/mm diffraction grating

• Blazed wavelength: 250 nm

• Focus: 300 nm

• Bandwidth: 0.1, 0.2, 0.5, 1.0, 2.0, 5.0 nm

• Scan mode: Automatic

• Photometric type: Single beam

• Wavelength accuracy: ±0.15 nm

• Wavelength resolution: 0.2 nm±0.02 nm

• Wavelength reproducibility: <0.05 nm

• Spectral bandwidth: 0.5, 1.0, 2.0, 5.0 nm

• Baseline stability: 0.005 A/30 min

• Background correction:
  Deuterium Arc (D2) 1.0 Abs,

  Self Reversal (SR) 3.0 Abs

   

  Flame Analysis

• Flame type: Air/acetylene

• Sensitivity (Cu): 2 μg/ml Absorption>0.280 Abs

• Characteristic Concentration: Cu<0.02 μg/ml

• Detection limit: Cu<0.004 μg/ml
  Repeatability: Cu<0.7 %

• Burner head: Titanium Alloy

   

• Nebulizer:
  High–efficiency glass,

  acid proof available as an option

  Pre-mix chamber: Corrosion resistant

• Atomizer selection:

  Manual (AA990F)
  Automatic changeover (AA990FG)

• Safety features: Burner switch, flame sensor, gas leak sensor, low gas pressure sensor, drain trap sensor, power loss protection

  
  Graphite Furnace Analysis

• Graphite head: Transversally heated

• Temperature range: Ambient-2650 ℃

• Heating program: Up to 10 steps. Drying, Ashing, Atomization, Cleaning 

• Feedback: Voltage and optical temperature control feedback

• Sensitivity (Cu): 50 ng/m Absorption>0.40 Abs

Features:

The AA900 Atomic Absorption Spectrometer is a versatile entry level instrument with a computer controlled Air/Acetylene flame for general laboratory requirements. Due to its high sensitivity and excellent performance the instrument can be used for a wide range of applications. The versatile instrument is available in three configurations:

AA990F-Flame atomizer only.

AA990G-Graphite furnace atomizer only. 

AA990FG-Combined with flame and graphite furnace atomizer switch aromatically. 

Common Applications include: Agricultural, Environmental, Petrochemical, Clinical.

â—† Easy-to-use automation software 

â—† Integrated safety precautions for user protection

â—† Precision accuracy with integrated correction system 

â—† Life cycle value, best choice for less than 8 elements of analysis

Specifications:

• Wavelength range: 190-900 nm

• Light source: Hollow cathode lamp (HCL), Deuterium Arc lamp (D2)

• Modulation: Square wave pulse

• Modulation frequency :

  100 Hz self reversal (SR) background,

  400 Hz Deuterium Arc (D2) background

• Monochromator

• Grating: 1800 grooves/mm diffraction grating

• Blazed wavelength: 250 nm

• Focus: 300 nm

• Bandwidth: 0.1, 0.2, 0.5, 1.0, 2.0, 5.0 nm

• Scan mode: Automatic

• Photometric type: Single beam

• Wavelength accuracy: ±0.15 nm

• Wavelength resolution: 0.2 nm±0.02 nm

• Wavelength reproducibility: <0.05 nm

• Spectral bandwidth: 0.5, 1.0, 2.0, 5.0 nm

• Baseline stability: 0.005 A/30 min

• Background correction:
  Deuterium Arc (D2) 1.0 Abs,

  Self Reversal (SR) 3.0 Abs

   

  Flame Analysis

• Flame type: Air/acetylene

• Sensitivity (Cu): 2 μg/ml Absorption>0.280 Abs

• Characteristic Concentration: Cu<0.02 μg/ml

• Detection limit: Cu<0.004 μg/ml
  Repeatability: Cu<0.7 %

• Burner head: Titanium Alloy

   

• Nebulizer:
  High–efficiency glass,

  acid proof available as an option

  Pre-mix chamber: Corrosion resistant

• Atomizer selection:

  Manual (AA990F)
  Automatic changeover (AA990FG)

• Safety features: Burner switch, flame sensor, gas leak sensor, low gas pressure sensor, drain trap sensor, power loss protection

  
  Graphite Furnace Analysis

• Graphite head: Transversally heated

• Temperature range: Ambient-2650 ℃

• Heating program: Up to 10 steps. Drying, Ashing, Atomization, Cleaning 

• Feedback: Voltage and optical temperature control feedback

• Sensitivity (Cu): 50 ng/m Absorption>0.40 Abs

Features:

The AA900 Atomic Absorption Spectrometer is a versatile entry level instrument with a computer controlled Air/Acetylene flame for general laboratory requirements. Due to its high sensitivity and excellent performance the instrument can be used for a wide range of applications. The versatile instrument is available in three configurations:

AA990F-Flame atomizer only.

AA990G-Graphite furnace atomizer only. 

AA990FG-Combined with flame and graphite furnace atomizer switch aromatically. 

Common Applications include: Agricultural, Environmental, Petrochemical, Clinical.

â—† Easy-to-use automation software 

â—† Integrated safety precautions for user protection

â—† Precision accuracy with integrated correction system 

â—† Life cycle value, best choice for less than 8 elements of analysis

Specifications:

• Wavelength range: 190-900 nm

• Light source: Hollow cathode lamp (HCL), Deuterium Arc lamp (D2)

• Modulation: Square wave pulse

• Modulation frequency :

  100 Hz self reversal (SR) background,

  400 Hz Deuterium Arc (D2) background

• Monochromator

• Grating: 1800 grooves/mm diffraction grating

• Blazed wavelength: 250 nm

• Focus: 300 nm

• Bandwidth: 0.1, 0.2, 0.5, 1.0, 2.0, 5.0 nm

• Scan mode: Automatic

• Photometric type: Single beam

• Wavelength accuracy: ±0.15 nm

• Wavelength resolution: 0.2 nm±0.02 nm

• Wavelength reproducibility: <0.05 nm

• Spectral bandwidth: 0.5, 1.0, 2.0, 5.0 nm

• Baseline stability: 0.005 A/30 min

• Background correction:
  Deuterium Arc (D2) 1.0 Abs,

  Self Reversal (SR) 3.0 Abs

   

  Flame Analysis

• Flame type: Air/acetylene

• Sensitivity (Cu): 2 μg/ml Absorption>0.280 Abs

• Characteristic Concentration: Cu<0.02 μg/ml

• Detection limit: Cu<0.004 μg/ml
  Repeatability: Cu<0.7 %

• Burner head: Titanium Alloy

   

• Nebulizer:
  High–efficiency glass,

  acid proof available as an option

  Pre-mix chamber: Corrosion resistant

• Atomizer selection:

  Manual (AA990F)
  Automatic changeover (AA990FG)

• Safety features: Burner switch, flame sensor, gas leak sensor, low gas pressure sensor, drain trap sensor, power loss protection

  
  Graphite Furnace Analysis

• Graphite head: Transversally heated

• Temperature range: Ambient-2650 ℃

• Heating program: Up to 10 steps. Drying, Ashing, Atomization, Cleaning 

• Feedback: Voltage and optical temperature control feedback

• Sensitivity (Cu): 50 ng/m Absorption>0.40 Abs

State-of-the-art technology with an easy-to-use format in a compact footprint: that is the Eppendorf BioPhotometer! It's large key pads, pre-programmed methods, and pre-set wavelengths and conversion factors greatly simplify the sample quantification. The large LCD screen displays the sample concentrations, absorption values, OD260/OD230 and OD260/OD230 and sample dilutions at a glance.

Features:

• Compact design, easy to transport
• Robust housing, splash- and water-resistant
• High-value components guarantee high operating safety
• Metal housing ensures high stability
• Xenon flash lamp source with extremely long service life
• Ready to measure immediately (no warmup time)
• Self-explanatory, extremely simple operation
• Measurement only takes approx 2 seconds
• Programmed methods: ssDNA, dsDNA, RNA, Oligo, Protein, Lowry/Lowry micro, Bradford/Bradford micro, BCA/BCA micro, and OD 600
• Optional background correction at 320 nm for UV methods
• Automatic calculation of sample dilution
• Simple conversion using the "Conversion" key
• Up to 10 standards for colorimetric analyses
• Storage of the last 100 results and all corresponding data
• Storage of all calibrations
• Sample data and calibration data can be called up after being stored

Specifications:

• Optical system:  Absorption, single-beam photometer with reference beam
• Light source: Xenon flash lamp
• Light beam height: 8.5 mm
• Spectral range:  220 to 750 nm
• Wavelengths: Xe 230; 260; 280; 320; 562; 595 nm
• Spectral range width: 5 nm: 230 to 320 nm; 7 nm: 562 to 595 nm
• Photometric measuring range: 0,000 to 3,000 A
• Photometric accuracy: ±1% at 1 A
• Photometric precision: < 0.5% at 1 A
• Method-dependent evaluation:    - Absorbance/concentration using factor
  • Concentration using calibration with 1 to 10 standards
  • One-point calibration (1 std) / linear regression (2 to 10 standards)
  • Non-linear regression (polynom, 3rd degree; 4 or 5 standards), 1x, 2x or 3x determination
  • Ratio 260/280, ratio 260/230, molar concentration, total yield
  • Warburg formula for protein direct A280
• Calibration memory: For protein methods
• Results memory: For 100 results with absorbance, ratio values, sample no., dilution, date and time
• Printer interface: RS-232C, serial, for printer or PC with BioPhotometer software package
• Power consumption: Approx. 20 W in operation; 10 W in standby mode
• Cuvettes: UVette and common rectangular cuvettes of suitable glass or plastic materials

Multiple purpose capabilities allow you to measure a wide range of analytes.

Features:

• Compact footprint provides a space-saving, convenient system
• Intuitive keyboard with integrated controls and LCD display
• Routine measurements require just a few keystrokes
• Direct measurement of routine absorbance or transmittance data
• Concentration mode for single point standard or factor-based quantitative analysis
• Bidirectional RS-232-C interface

Specifications

• Optical System: Grating based, 1200 lines/mm
• Spectral Bandwidth: <=8nm
• Wavelength Range: 325 to 1100nm
• Wavelength Accuracy: ±2.0nm
• Wavelength: Readout: 20-character, 2-line LCD
• Readout: Absorbance, %Transmittance, Concentration
• Range:
  • -0.1 to +2.5A
  • 0 to 125%T
  • 0 to 1999C
• Accuracy:
  • ±0.003A from 0 to 0.3A
  • ±1% from 0.3 to 2.5A
• Noise (at 500nm): <=0.001A at 0A; ±0.004A at 2A
• Drift: 0.003A/hour
• Stray Radiant Energy: <=0.1%T at 340 and 400nm
• Communication Ports
  • RS-232-C (serial)
  • Centronics-compatible (parallel)
• Dimensions: 13L x 12W x 7 in.H (33 x 30 x 19cm)
• Net Weight: 10 lb. (4.5kg)

Versatile spectrometers operating in the ultraviolet (UV) and visible (Vis) spectral ranges. Optical components are coated with silica for durability and holographic grating is used in the monochromator. Features a double-beam, all-reflecting system, usable for a wide range of applications.

Includes:

• Computer loaded w/ software
• 6 cell Cuvette Holder
• Peltier Port

Modes Of Operation:

• Scanning
• Wavelength program
• Time-drive
• Rate
• Quant
• Scanning quant

Features:

• True double-beam operation
• High throughput, low stray-light optics
• Pre-aligned deuterium and tungsten-halogen lamps
• Wide range of accessories and consumables

Benefits:

• Very high stability, high accuracy and reproducibility.
• Easily passes all pharmacopoeia and regulatory performance tests
• Quickly replaced for minimal downtime
• Perfect for any liquid sample
• Select the version that best matches your analysis needs and the skill level of your operators

Applications:

• Routine UV/ Vis Testing
• Liquids Analysis
• Solids, Pastes, and Powder Samples
• Regulatory Tests requiring variable bandwidths

Specifications:

• Temperature Range: Ambient 15ºC to 35ºC
• Relative Humidity: 20% to 80% (without condensation)
• Dimensions: 650 x  560 x 260 nm (W x D x H)
• Wavelength Range: 190 nm to 1100 nm
• Wavelength Accuracy: ±0.1 nm
• Wavelength Reproducibility: ±0.1 nm
• Spectral Bandwidth: 0.5 nm, 1 nm, 2 nm, 4 nm
• Beam Center Height: 15 mm
• Optical Path Length: 121 mm
• Scan Speeds (nm/min): 7.5, 15, 30 , 60, 120, 240, 480, 960, 1920 and 2880
• Photometric Range: 0% to 100%
• Detector: Photodiodes
• Grating: Holographic, 1053 lines/mm
• Lamp Change: Automatically at 326 nm
• Radiation Sources: Pre-Aligned Deuterium and Halogen Lamps
• Digital Port: One RS 232 C Interface
• Type: Scanning Double-Beam
• Pollution Degree: 2
• Altitude: Up to 2000 m

Versatile spectrometers operating in the ultraviolet (UV) and visible (Vis) spectral ranges. Optical components are coated with silica for durability and holographic grating is used in the monochromator. Features a double-beam, all-reflecting system, usable for a wide range of applications.

Includes:

• Computer loaded w/ software
• 6 cell Cuvette Holder
• Peltier Port

Modes Of Operation:

• Scanning
• Wavelength program
• Time-drive
• Rate
• Quant
• Scanning quant

Features:

• True double-beam operation
• High throughput, low stray-light optics
• Pre-aligned deuterium and tungsten-halogen lamps
• Wide range of accessories and consumables

Benefits:

• Very high stability, high accuracy and reproducibility.
• Easily passes all pharmacopoeia and regulatory performance tests
• Quickly replaced for minimal downtime
• Perfect for any liquid sample
• Select the version that best matches your analysis needs and the skill level of your operators

Applications:

• Routine UV/ Vis Testing
• Liquids Analysis
• Solids, Pastes, and Powder Samples
• Regulatory Tests requiring variable bandwidths

Specifications:

• Temperature Range: Ambient 15ºC to 35ºC
• Relative Humidity: 20% to 80% (without condensation)
• Dimensions: 650 x  560 x 260 nm (W x D x H)
• Wavelength Range: 190 nm to 1100 nm
• Wavelength Accuracy: ±0.1 nm
• Wavelength Reproducibility: ±0.1 nm
• Spectral Bandwidth: 0.5 nm, 1 nm, 2 nm, 4 nm
• Beam Center Height: 15 mm
• Optical Path Length: 121 mm
• Scan Speeds (nm/min): 7.5, 15, 30 , 60, 120, 240, 480, 960, 1920 and 2880
• Photometric Range: 0% to 100%
• Detector: Photodiodes
• Grating: Holographic, 1053 lines/mm
• Lamp Change: Automatically at 326 nm
• Radiation Sources: Pre-Aligned Deuterium and Halogen Lamps
• Digital Port: One RS 232 C Interface
• Type: Scanning Double-Beam
• Pollution Degree: 2
• Altitude: Up to 2000 m

Description:

Thermo Scientific™ NanoDrop 8000 is a muti-sample micro-volume UV-Vis spectrophotometer. With the NanoDrop 8000, you can measure more samples in less time with the same reliability and patented sample retention technology of the NanoDrop 2000.

Specifications:

• Absorbance Accuracy: 3% (at 0.74 Abs at 350nm)
• Absorbance Range: 0 - 75Abs
• Accuracy: 0.003 *SD of 10 individual measurements at 0.74Abs
• Accuracy (Absorption): 3% (at .74 at 350nm)
• Applications: Nucleic acid, protein, cell culture and custom methods
• Certifications/Compliance: UL/CSA and CE
• Detection Limits: 2.5 ng/µL (dsDNA), 0.15 mg/mL (BSA)
• Detection Range: 2.5-3,700 ng/µL (dsDNA), 0.15 - 100 mg/mL (BSA)
• Detector Type: 2048-element linear silicon CCD array
• Footprint: 24 x 32 cm
• Lamp: Xenon Flash Lamp
• Measurement Time: <20 sec.
• No. of Samples: Up to 8
• Pathlength: 0.1, 0.2 and 1.0 mm
• Sample Volume: 1µL
• Spectral Resolution: ≤3 nm (FWHM at Hg 546.1 nm)
• Voltage: 12VDC
• Wattage: ±1 nm
• Wavelength Accuracy: ±1 nm
• Wavelength Range: 220 - 750 nm
• Weight: 3.4 kg

Includes:
• Computer w/ Software
• Necessary Cables
• Manual

The NanoDrop 1000 Spectrophotometer measures 1 ul samples with high accuracy and reproducibility. The full spectrum (220nm-750nm) spectrophotometer utilizes a patented sample retention technology that employs surface tension alone to hold the sample in place. This eliminates the need for cumbersome cuvettes and other sample containment devices and allows for clean up in seconds. In addition, the NanoDrop 1000 Spectrophotometer has the capability to measure highly concentrated samples without dilution (50X higher concentration than the samples measured by a standard cuvette spectrophotometer).

UV/VIS spectrophotometry is simple for samples as small as 1 ul using the NanoDrop 1000 Spectrophotometer. The small sample requirement and ease of use make the NanoDrop 1000 Spectrophotometer ideally suited for measuring:
• Nucleic acid concentration and purity of nucleic acid samples up to 3700 ng/ul (dsDNA) without dilution
• Fluorescent dye labeling density of nucleic acid microarray samples
• Purified protein analysis (A280) up to 100 mg/ml (BSA)
• Expanded spectrum measurement and quantitation of fluorescent dye labeled proteins, conjugates, and metalloproteins
• Bradford Assay analysis of protein
• BCA Assay analysis of protein
• Lowry Assay analysis of protein
• Pierce Protein 660 nm Protein Assay
• Cell density measurements
• General UV-Vis spectrophotometry

Specifications:

Sample Size: 1 microliter

Path Length: 1 mm (with auto-ranging to 0.2 mm)

Light Source: Xenon flash lamp

Detector Type: 2048-element linear silicon CCD array

Wavelength Range: 220-750 nm

Wavelength Accuracy: 1 nm

Wavelength Resolution: 3 nm (FWHM at Hg 546 nm)

Absorbance Precision: 0.003 absorbance ( 1mm path)

Absorbance Accuracy: 2% (at 0.76 absorbance at 257 nm)

Absorbance Range: 0.02-75 (10 mm equivalent absorbance)

Detection Limit: 2 ng/microliter (dsDNA)

Maximum Concentration: 3700 ng/microliter (dsDNA)

Measurement Cycle Time: 10 seconds

Dimensions: 14 cm X 20 cm

Weight: 1.6 kg

Sample Pedestal Material of Construction: 303 stainless steel and quartz fiber

Operating Voltage: 12 Vdc

Operating Power Consumption: 6 W

Standby Power Consumption: 1.5 W Heating : 37 ± 0.5 °C

Features:

Prevent costly delays with an enhanced understanding of sample quality using the Thermo Scientific™ NanoDrop™ One Microvolume UV-Vis Spectrophotometers. Innovative Thermo Scientific™ Acclaro™ Sample Intelligence technology is built into every instrument for improved measurement accuracy and contaminant identification. Quantify and qualify DNA, RNA, and protein samples  in seconds with only 1-2 µL, and obtain full-spectral data before you decide to use samples in downstream applications. Additional cuvette position also available.

Specifications:

• Detector Type :2048-element CMOS linear image sensor
• Dimensions (L x W x H): 20 x 25.4 x 32.3 cm (8 x 10 x 12.7 in.)
• Display: 7-inch, 1280 x 800 high-definition color display
• Keypad: Built-in touchscreen, multipoint capacitive touch
• Lamp: Xenon flash lamp
• Sample Volume (Metric): Minimum 1µL
• Spectral Bandwidth: ≤1.8 nm (FWHM at Hg 254 nm)
• Voltage: 12 V (DC)
• Wavelength Accuracy: ±1 nm
• Wavelength Range: 190–850 nm