Used Lab Equipment

Includes:

• Model Eclipse 80i Motorized Microscope
• Mechanical Stage
• (2) CFI10X/22 eyepieces
• Objectives
  • Plan Fluor 10x
  • Plan Fluor 100x OIL
• Motorized Filter Wheel
• Red, Green, Blue cubes
• RETIGA 2000R Q-Imaging Digital Camera
  
  Additional Objectives and Configurations Available. Cameras are also available.

This Bruker BioSpin Avance III HD 400 High Performance Digital NMR Spectrometer was never installed and is unused in storage.

Specifications:

Frequency Controller & Signal Generation Unit

• Basic configuration two channels frequency range each channel: 5–650 MHz each
• Number of numerically controlled oscillators per channel: 3
• Frequency resolution: < 0.005 Hz
• Phase resolution: < 0.006º
• Attenuation resolution / attenuation range: < 0.1 dB / 90 dB
• Amplitude modulation: > 90 dB
• Event time for digital setting of frequency, phase and amplitude, either individually or simultaneously: 25 ns
• Memory per channel e.g. for pulse shaping: >8 Mbyte
• Phase monotony over 90 dB amplitude setting range: < + / - 0.5 º

Timing Controller

• Pulse sequence parameter calculation: in real time
• Timing resolution / min. duration:5 / 25 ns
• Output bus for events and devices: 96-bit

Communication Protocol

• Fast Ethernet TCP / IP

Host Computer

• Operating system: Windows 7

Receiver:

• Bandwidth: up to 5 MHz

Digital Receiver Unit (DRU)

• Effective dynamic range of digitizer
• SW < 5 MHz: > 16-bit
• SW < 1 MHz: > 18-bit
• SW < 6 kHz: > 22-bit
• Data compression / digital filtering: on the fly
• Optimum real time digital filters: Yes

Quadrature Receiver (RXAD):

• Quadrature image peaks with digital quadrature detection: 0%

Specifications:

• Electrical requirements: 115V, 50/60Hz, 3 Amps

Specifications:

• Electrical requirements: 115V, 50/60Hz, 3 Amps

Specifications:

• Electrical requirements: 115V, 50/60Hz, 3 Amps

Includes:

• Motorized Stage
• (2) CFI 10X/22 eyepieces
• Objectives
  • 40x Plan Fluor
  • 60x
• Red, Green, Blue cubes
• Cool LED pE-100 Control pod and light source
• Ludl MAC 6000 system
  
  Additional Objectives and Configurations Available. Cameras are also available.

Features:
This is a used Chiu technical fo-150 lumina fiber optic illuminator light source


Specifications:

• Fuse: 5x20mm 3.15 AmpF

• Output: 150 Watts

• Input: 115v 60Hz 3 Amp

Description:

This compact device is the ideal external light source for fluorescence excitation in microscopy. Coupling is preferably achieved via liquid light guides. The average service life of a lamp is 2,000 hours. The optimised internal air flow cools the lamp and enables quiet operation. A resettable operating hour meter shows lamp operating hours. The brightness of the lamp output can be varied in 5 steps (0-100%) by means of a mechanical dimmer unit. An ultra-fast shutter opens or closes after activation with approx. 6 ms. The shutter is actuated by means of an appliance switch, but is also possible externally by means of a remote control input or CAN-BUS connection. This compact light source is available as a VIS or UV version in addition to a version that permits the coupling of multi-pin liquid light guides.

Specifications:

• Dimensions (H x W x D): 210 x 130 x 290 mm
• Weight: 4.7 kg
• Ambient Temperature: 0°C to 40°C
• Storage Temperature: - 20°C to + 85°C

The Lumen 200 Fluorescence Illumination System is a powerful, cost effective alternative to standard 100 Watt mercury and halogen lamphouses. The combination of Prior's proprietary 2,000 hour life, 200 watt metal arc lamp and two or three meter liquid light guide provide unrivalled versatility and illumination power. The Lumen 200 utilizes a metal halide lamp rather than the more traditional high pressure mercury or xenon burners. This means 2000 hours of stable output compared to a maximum of 300 hours for a mercury lamp. 

Specifications:

• Voltage: 100-240V
• Current: 2A
• Frequency: 50-60Hz
• Ambient Operating Temperature: 5 - 30°C
• Weight: 5 kg

Asking Price: $4500 w/ 1 year manufacturer warranty and 25,000 hour lamp guarantee

List Price: $4995 (We are discounting 10% off List)

Includes: X-Cite 110LED, speedDIAL remote, 3mm x 1500mm Liquid Light Guide, Accessory Kit (tools, USB cable, power cord)

Does not include Microscope Adaptor

The new X-Cite 110LED from Excelitas Technologies is a compact, white light LED light source for fluorescence imaging applications. Providing excitation for DAPI, GFP, mCherry and Cy5 routine imaging, the X-Cite 110LED offers exceptional field uniformity through liquid light guide delivery. With manual, PC and TTL control, the X-Cite 110LED has LEDs guaranteed for 25,000 hours with no lamps or modules to replace. X-Cite 110LED is the newest addition to the X-Cite family which is known for high quality, reliability and exceptional delivery.

Features:

• LED Technology
• White Light Excitation
• Light Guide Delivery
• Multiple Control Options
• Small Footprint
• Optimized Thermal Management
• X-Cite Coupling Optics (optional)

Benefits:

• Mercury-free, higher efficiency, stability, instant ON/OFF and long lifetime
• Excitation of commonly used fluorophores such as DAPI, GFP/FITC, mCherry/Texas Red, and Cy5
• Flexibility in light delivery as well as unit location
• Simple operation through USB, TTL or speedDIAL
• Minimal space requirement; less bench top real estate used
• Maximum LED output, lifetime, stability and reliability
• Efficient optical output and uniformity with the highest performing coupling optics available

Technical Specifications

• Wavelength Range: 360-660nm
• LED Peaks/FWHM: 385/30 nm, 475/40 nm, 560/80 nm, 640/40 nm
• External Power Supply: Universal input 100-240VAC, 50/60Hz
• Power Consumption: 160W
• LED ON/OFF Response Times: 100μs TTL / 1 ms USB
• Control Options:        
  • ON/OFF - TTL compatible
  • speedDIAL
  • RS-232 commands (SDK available), USB
• I/O Connections:      
  • BNC input
  • USB (B-type)
• Dimensions (W x H x D): 95 mm x 230 mm x 212 mm (3.7" x 9.1" x 8.4")
• Weight: 3 kg (6.6 lbs)
• Certifications: CE, RoHS
• Warranty: LEDs – 25,000 hours or 3 years

Includes: Collimating adaptor, Liquid Light Guide

Also Available Used: $2500 without Collimating Adapter

Also ask us about replacement Accessories such as Light Guides and Lamps!

Features

• Pre-aligned lamp
• 2000 hour lamp life, guaranteed
• Powerful 120W lamp
• Intelli-Lamp technology
• Optional adjustable iris

Benefits

• Easy lamp replacement; no alignment required
• Fewer lamp replacements saves time and money
• Rich spectrum with high excitation intensity
• Maintains optimum lamp temperature, automatically accumulates lamp hours
• Minimize photobleaching by adjusting the light intensity of the microscope illumination system

Specifications

• X-Cite 120Q Microscope Illumination System includes: Lamp module, 1.5mm liquid light guide with wide-field fluorescence microscope adaptor, grounded and shielded power cord, and manual
• Lamp: Proprietary 120W Mercury Vapor Short Arc
• Lamp Life: 2000 hours guaranteed; 2500 hours typical
• Power Supply: High efficiency, switch mode, line isolated, 90-264 VAC, 47-63 Hz, universal input
• Warm-Up Period: 90 seconds (typical)
• Panel Controls: Power On/Off, intensity adjustment (if applicable)
• Panel Displays: Accumulated lamp usage, lamp status indicators
• Dimensions (LxWxH): 5″ x 5.5″ x 6.5″ (34.2cm x 13.9cm x 16.5cm)
• Weight: 7 lbs. (3.04 kg)
• Worldwide Certifications: CE Marked, Certified to IEC, Canadian and US Standards
• Warranty: 1 year (excluding lamp and light guide)
• Adaptors: Compatible with wide-field fluorescence microscopes from all major manufacturers

Includes: Collimating adaptor, Liquid Light Guide

Also Available Used: $2500 without Collimating Adapter

Also ask us about replacement Accessories such as Light Guides and Lamps!

Features

• Pre-aligned lamp
• 2000 hour lamp life, guaranteed
• Powerful 120W lamp
• Intelli-Lamp technology
• Optional adjustable iris

Benefits

• Easy lamp replacement; no alignment required
• Fewer lamp replacements saves time and money
• Rich spectrum with high excitation intensity
• Maintains optimum lamp temperature, automatically accumulates lamp hours
• Minimize photobleaching by adjusting the light intensity of the microscope illumination system

Specifications

• X-Cite 120Q Microscope Illumination System includes: Lamp module, 1.5mm liquid light guide with wide-field fluorescence microscope adaptor, grounded and shielded power cord, and manual
• Lamp: Proprietary 120W Mercury Vapor Short Arc
• Lamp Life: 2000 hours guaranteed; 2500 hours typical
• Power Supply: High efficiency, switch mode, line isolated, 90-264 VAC, 47-63 Hz, universal input
• Warm-Up Period: 90 seconds (typical)
• Panel Controls: Power On/Off, intensity adjustment (if applicable)
• Panel Displays: Accumulated lamp usage, lamp status indicators
• Dimensions (LxWxH): 5″ x 5.5″ x 6.5″ (34.2cm x 13.9cm x 16.5cm)
• Weight: 7 lbs. (3.04 kg)
• Worldwide Certifications: CE Marked, Certified to IEC, Canadian and US Standards
• Warranty: 1 year (excluding lamp and light guide)
• Adaptors: Compatible with wide-field fluorescence microscopes from all major manufacturers

The X-Cite 120LEDBoost is more powerful than ever and efficiently excites a greater range of fluorophores than the original X-Cite 120LED, with no compromise. Even the popular red fluorophores are no challenge for the X-Cite 120LEDBoost. The X-Cite 120LEDBoost offers superior optical power and exceptional field uniformity at the specimen level with the broadest spectrum of fluorescence illumination through manual, PC and TTL control. With LEDs guaranteed for 25,000 hours and no lamps or modules to replace, X-Cite 120LEDBoost offers sheer simplicity and convenience to researchers allowing them to focus on their experiments instead of equipment maintenance.

Including microscope flange (direct coupled), PC/TTL control and a speed dial hand controller for easy manual on/off and 1% intensity steps

Features

• High Power LEDs
• Broad Spectrum
• Excellent Field Uniformity
• Instant ON/OFF (electronic shuttering)
• Several Control Options
• Direct Coupling
• LED Technology
• Unmatched Thermal Management
• Simple Operation
• Less Toxic Waste

Benefits

• Efficient fluorophore excitation
• Excitation of a variety of fluorophores
• Reliable image data
• No warm-up, no vibration from mechanical shuttering
• Manual, USB, TTL, 3rd party software
• Maximum light transmission to sample
• Long-life, stable, reliable, maintenance-free
• Vibration-free imaging
• Fingertip control, no training required
• No mercury disposal issues

Specifications:

• Wavelength Range: 370-700nm
• Power Supply: Universal input 100-240VAC, 50/60Hz
• Power Consumption: 230W
• LED ON/OFF: 50µs TTL
• Response Times: 1ms USB
• Control Options
  • Manual – speedDIAL (1% increments)
  • TTL compatible – BNC input
  • RS-232 commands (SDK available)
  • USB
• Height
  • powerCUBE: 213mm (8.4″)
  • LED Head: 116mm (4.6″)
  • speedDIAL: 59mm (2.3″)
• Width
  • powerCUBE: 173mm (6.8″)
  • LED Head: 90mm (3.5″)
  • speedDIAL: 80mm (3.1″)
• Depth
  • powerCUBE: 260mm (10.2″)
  • LED Head: 166mm (6.5″)
  • speedDIAL: 112mm (4.4″)
• Weight
  • powerCUBE: 4.8kg (10.6lbs)
  • speedDIAL: 0.3kg (0.7lbs)
• Certifications: CE marked; certified to IEC, Canadian and US standards; RoHS2 compliant
• Warranty: LEDs – 25,000 hours (or 3 years); all other X-Cite® 120LED components 1 year, parts and labor

**Brand New**

List Price: $5495 (We are discounting 10% off List)

Also ask us about replacement Accessories!

Includes: X-Cite 120LED Head, miniCube, speedDIAL, microscope flange, accessory kit

Features

• LED Technology
• White Light Excitation
• Direct Coupled
• Multiple Control Options
• Small Footprint
• Optimized Thermal Management
• X-Cite Coupling Optics

Benefits

• Efficiency, stability, instant ON/OFF and long lifetime
• Excitation of commonly used fluorophores such as DAPI, CFP, GFP/FITC, YFP, mCherry/Texas Red, and Cy5
• High Power excitation
• Simple operation through USB, TTL or speedDIAL
• Minimal space requirement ; less bench top real estate used
• Maximum LED output, lifetime, stability and reliability
• Efficient optical output and uniformity with highest performing coupling optics

Specifications:

• Wavelength Range: 370-700nm
• External Power Supply: Universal input 100-240VAC, 50/60Hz
• Power Consumption: 150W
• LED ON/OFF Response Times: 85μs TTL / 1ms USB
• Control Options: ON/OFF - TTL compatible, speedDIAL, RS-232 commands (SDK available), USB
• I/O Connections: BNC input , USB (B-type)
• Dimensions – HEAD: 100mm x 135mm x 110mm (W x H x D)
• Dimensions – CONTROLLER: 180mm x 110mm x 230mm (W x H x D)
• Dimensions – speedDIAL: 80mm x 59mm x 112mm (W x H x D)
• Weight: 4 kg (7.5 lb)
• Certifications: RoHS, CE
• Warranty: LEDs – 20,000 hours, All other X-Cite 120LEDmini components - 1 year, parts and labor

Includes: Collimating adaptor, Liquid Light Guide

Also ask us about replacement Accessories such as Light Guides and Lamps!

Features

• Pre-aligned lamp
• 2000 hour lamp life, guaranteed
• Powerful 120W lamp
• Intelli-Lamp technology
• RS-232 communication
• Standard adjustable iris
• Software interface
• Foot pedal

Benefits

• Easy lamp replacement; no alignment required
• Fewer lamp replacements saves time and money
• Rich spectrum with high excitation intensity
• Maintains optimum lamp temperature, automatically accumulates lamp hours
• Minimize photobleaching by adjusting the light intensity of the microscope illumination system
• PC control of lamp, iris and shutter; integrate into automated system
• Minimize photobleaching by adjusting light intensity
• Hands-free operation
• Simple to use

Specifications

• X-Cite 120PC Q Microscope Illumination System includes: Lamp module, liquid light guide, software CD, grounded and shielded power cord, 9-pin serial cable, manual and quick start guide
• Lamp: Proprietary 120W Mercury Vapor Short Arc
• Lamp Life: 2000 hours guaranteed; 2500 hours typical
• Power Supply: High efficiency, switch mode, line isolated, 90-264 VAC, 47-63 Hz, universal input
• Warm-Up Period: 90 seconds (typical)
• Panel Controls: Power On/Off, Mode Select, Adjust Up/Down, Start/Stop
• Panel Displays: Iris setting (100%, 50%, 25%, 12%, 0%), accumulated lamp hours, exposure time (0.2-999.9 sec), lamp on, shutter open, lamp warm up, lamp/shutter status messages
• Dimensions (LxWxH): 5″ x 5.5″ x 6.5″ (34.2cm x 13.9cm x 16.5cm)
• Weight: 7 lbs. (3.18 kg)
• Worldwide Certifications: CE Marked, Certified to IEC, Canadian and US Standards
• Adaptors: Compatible with wide-field fluorescence microscopes from all major manufacturers