Used Lab Equipment

Includes: 

• Qty (2) - G1361A Agilent 1100 Series Prep Pumps
• G1315A DAD Diode Array Detector (G1314A VWD Detector also available)
• G2258A Agilent 1100 Prep Autosampler
• G1364B AFC Automated Fraction Collector
• Computer Loaded with ChemStation
• Monitor – Mouse – Keyboard
• Cables and Manuals

Includes:

• Qty (2) - G1361A Agilent 1100 Series Prep Pumps
• G1315A DAD Diode Array Detector (G1314A VWD Detector also available)
• G2258A Agilent 1100 Prep Dual Loop Autosampler (Manual Injector also an option)
• G1364B AFC Automated Fraction Collector
• Computer Loaded with ChemStation
• Monitor – Mouse – Keyboard
• Cables and Manuals

G1361 Prep Pump

Features:

• Extended flow rate range
• Without changing pump heads, provides flow rates up to 100 mL/min at 400 bar
• For preparative and analytical applications with low flow rates (0.5 mL/min, upward), provides precise high-pressure binary gradient formation with low delay volume (700 uL)
• Automated seal wash using a peristaltic pump extends seal lifetime
• Pumps stop in response to column blockage or leaks
• Automated electromagnetic purge valve simplifies system setup
• Software provides solvent level control that keeps the pump from running dry

Features:

• Extended flow rate range
• Without changing pump heads, provides flow rates up to 100 mL/min at 400 bar
• For preparative and analytical applications with low flow rates (0.5 mL/min, upward), provides precise high-pressure binary gradient formation with low delay volume (700 uL)
• Automated seal wash using a peristaltic pump extends seal lifetime
• Pumps stop in response to column blockage or leaks
• Automated electromagnetic purge valve simplifies system setup
• Software provides solvent level control that keeps the pump from running dry

Can be sold as an individual component or as part of a complete stack

Specifications:

• Pressure: Operating range 0 – 40 MPa (0 – 400 bar, 0 – 5800psi)
• GLP features: Early maintenance feedback (EMF), electronic records of maintenance and errors
• Communications: Controller-area network (CAN). GPIB (IEEE-448), RS232C, APG-remote standard, optional four external contact closures and BCD vial number output
• Safety features: Leak detection and safe leak handling, low voltages in maintenance areas, error detection and display
• Injection range:
  • 900 µl in 0.1 µl increments (recommended 1 µl increments)
  • Up to 1800 µl with multiple draw (hardware modification required)
  • Up to 5000 µl with multiple draw (hardware modification required)
• Replicate injections: – 99 from one vial
• Precision:
  • Typically < 0.5% RSD of peak areas from 5 – 2000 µl,
  • Typically < 1% RSD of peak areas from 2000 – 5000 µl
  • Typically < 3% RSD of peak areas from 1 – 5 µl
• Minimum sample volume:
  • µl from 5 µl sample in 100 µl microvial
  • 1 µl from 10 µl sample in 300 µl microvial
• Sample viscosity range: 0.2 – 50 cp
• Sample capacity:
  • 100 × 2-ml vials in 1 tray
  • 15 × 6-ml vials in ½ tray (Agilent vials only)
• Injection cycle time: Typically 50 s, depending on draw speed and injection volume

Specifications:

• Pressure: Operating range 0 – 40 MPa (0 – 400 bar, 0 – 5800psi)
• GLP features: Early maintenance feedback (EMF), electronic records of maintenance and errors
• Communications: Controller-area network (CAN). GPIB (IEEE-448), RS232C, APG-remote standard, optional four external contact closures and BCD vial number output
• Safety features: Leak detection and safe leak handling, low voltages in maintenance areas, error detection and display
• Injection range:
  • 900 µl in 0.1 µl increments (recommended 1 µl increments)
  • Up to 1800 µl with multiple draw (hardware modification required)
  • Up to 5000 µl with multiple draw (hardware modification required)
• Replicate injections: – 99 from one vial
• Precision:
  • Typically < 0.5% RSD of peak areas from 5 – 2000 µl,
  • Typically < 1% RSD of peak areas from 2000 – 5000 µl
  • Typically < 3% RSD of peak areas from 1 – 5 µl
• Minimum sample volume:
  • µl from 5 µl sample in 100 µl microvial
  • 1 µl from 10 µl sample in 300 µl microvial
• Sample viscosity range: 0.2 – 50 cp
• Sample capacity:
  • 100 × 2-ml vials in 1 tray
  • 15 × 6-ml vials in ½ tray (Agilent vials only)
• Injection cycle time: Typically 50 s, depending on draw speed and injection volume

Features:

The Optima MAX and MAX-E microprocessor controlled tabletop ultracentrifuges generate high centrifugal forces for a variety of high-speed applications. The instrument design features a variable-frequency induction drive, the thermoelectric temperature control system, self-purging vacuum system, rotor overspeed identification system, program memory that can contain up to ten five-step programs, and a choice of acceleration and deceleration rates.

Specifications:

Speed

• Set speed:
• Optima MAX: 5 000 to 130 000 rpm in 1 000-rpm increments
• Optima MAX-E: 5 000 to 100 000 rpm in 1 000-rpm increments
• Speed control:actual rotor speed, ±50 rpm of set speed
• Speed display : actual rotor speed in 100-rpm increments above 5 000 rpm and 10-rpm increments at speeds below 5 000 rpm

Time

• Set time: to 99 hours 59 minutes
• Time display
• Manual operation: indicates run time remaining
• Programmed operation : time remaining in step

Temperature

• Set temperature: 0 to 40°C in 0.1° increments
• Temperature control (after equilibration): ±2°C of set temperature
• Temperature display: actual rotor temperature in 0.1° increments
• Ambient temperature range:15 to 35°C
• Humidity restrictions:. <95% (noncondensing)

Vacuum

• below 10 microns (1.34 Pa)

Acceleration

• 10 acceleration profiles—9 slow rates from 0 to 5 000 rpm followed by full acceleration to set speed; or maximum acceleration

Deceleration

• 11 deceleration profiles—10 slow rates n from 5 000 to 0 rpm, including coasting to a stop without brake; or full dynamic braking from set speed

Dimensions

• Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73.7 cm (29 in.)
• Depth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58.4 cm (23 in.)
• Height. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58.4 cm (23 in.)
• Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 kg (217 lb)
• Ventilation clearances (sides and rear) . . . . . . . . . . . . . . . . 7.6 cm (3.0 in.)

Finishes

• Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . coated polycarbonate
• Top surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . urethane paint
• Other surfaces. . . . . . . . . . . . . . . . . . . . . . . . . . . . general purpose paint

Electrical requirements

• 100-V instrument . . . . . . . . . . . . . . . . . . . 90–110 VAC, 12 A, 50/60 Hz
• 120-V instrument . . . . . . . . . . . . . . . . . . 100–130 VAC, 12 A, 50/60 Hz
• 220/240-V instrument . . . . . . . . . . . . . . . . . 198–254 VAC, 6 A, 50 Hz
• Maximum heat dissipation into room under
• steady-state conditions . . . . . . . . . . . . . . . . . . . . . . 1750 Btu/hr (0.5 kW)
• Noise level 0.91 m (3 ft) in front of centrifuge . . . . . . . . . . . . . . . . <60 dBa
• Installation category . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . II
• Pollution degree. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Features:

The Optima MAX and MAX-E (see Figure 1-1) microprocessor controlled tabletop ultracentrifuges generate high centrifugal forces for a variety of high-speed applications. The instrument design features a variable-frequency induction drive, the thermoelectric temperature control system, self-purging vacuum system, rotor overspeed identification system, program memory that can contain up to ten five-step programs, and a choice of acceleration and deceleration rates.

Manual and programmed operation are available. • In manual operation, you enter the individual run parameters before beginning each run. • In programmed operation, you can duplicate runs quickly and accurately by selecting one of ten programs previously entered into the program memory. Each program can contain up to five steps. User messages and/or audible signals are provided to alert you to conditions that may need attention. An optional feature of the Optima MAX or MAX-E is the RS 232C Interface Accessory, which enables it to be connected to a personal computer. Information about this feature will be supplied upon request.

Specifications:

Only values with tolerances or limits are guaranteed data. Values without tolerances are informative data, without guarantee.

Speed

• Set speed:
• Optima MAX . . . . . . 5 000 to 130 000 rpm in 1 000-rpm increments
• Optima MAX-E . . . . 5 000 to 100 000 rpm in 1 000-rpm increments
• Speed control . . . . . . . . . . . . . actual rotor speed, ±50 rpm of set speed
• Speed display . . . . . . . . . . . . actual rotor speed in 100-rpm increments above 5 000 rpm and 10-rpm increments at speeds below 5 000 rpm

Time

• Set time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . to 99 hours 59 minutes
• Time display
• Manual operation . . . . . . . . . . . . . . . indicates run time remaining
• Programmed operation . . . . . . . . . . . . . . . . time remaining in step
• Temperature
• Set temperature . . . . . . . . . . . . . . . . . . . . 0 to 40°C in 0.1° increments
• Temperature control (after equilibration). . . . . ±2°C of set temperature
• Temperature display. . . . . . . . . . . . . . . . . . . . . actual rotor temperature in 0.1° increments
• Ambient temperature range . . . . . . . . . . . . . . . . . . . . . . . . . 15 to 35°C
• Humidity restrictions. . . . . . . . . . . . . . . . . . . . . . . . <95% (noncondensing)
• Vacuum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . below 10 microns (1.34 Pa)
• Acceleration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 acceleration profiles—9 slow rates from 0 to 5 000 rpm followed by full acceleration to set speed; or maximum acceleration
• Deceleration . . . . . . . . . . . . . . . . . 11 deceleration profiles—10 slow rates n from 5 000 to 0 rpm, including coasting to a stop without brake; or full dynamic braking from set speed
• Dimensions
• Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73.7 cm (29 in.)
• Depth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58.4 cm (23 in.)
• Height. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58.4 cm (23 in.)
• Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 kg (217 lb)
• Ventilation clearances (sides and rear) . . . . . . . . . . . . . . . . 7.6 cm (3.0 in.)
• Finishes
• Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . coated polycarbonate
• Top surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . urethane paint
• Other surfaces. . . . . . . . . . . . . . . . . . . . . . . . . . . . general purpose paint
• Electrical requirements
• 100-V instrument . . . . . . . . . . . . . . . . . . . 90–110 VAC, 12 A, 50/60 Hz
• 120-V instrument . . . . . . . . . . . . . . . . . . 100–130 VAC, 12 A, 50/60 Hz
• 220/240-V instrument . . . . . . . . . . . . . . . . . 198–254 VAC, 6 A, 50 Hz
• Maximum heat dissipation into room under
• steady-state conditions . . . . . . . . . . . . . . . . . . . . . . 1750 Btu/hr (0.5 kW)
• Noise level 0.91 m (3 ft) in front of centrifuge . . . . . . . . . . . . . . . . <60 dBa
• Installation category . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . II

Pollution degree. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

 Includes One Year Service Contract, PM at 6 Months, and Installation

The AB SCIEX QTRAP 5500 System is a high sensitivity, bench top hybrid triple quadrupole-Linear Accelerator trap mass spectrometer designed for LC/MS/MS analyses. This instrument provides an uncompromised combination of Linear Accelerator trap and triple quadrupole functionality, uniquely allowing both  qualitative and quantitative analyses to be carried out in a single experiment.

Includes:

• AB Sciex 5500 Qtrap LC/MS/MS
• Agilent 1200 HPLC System
  
  • Agilent G1322A Degasser
  • Agilent G1311A Quat Pump
  • Agilent G1315D DAD (Diode Array Detector)
• Solvent Tray
• Computer Loaded with Analyst 1.6 Software       

Specifications

• Sensitivity MRM mode Reserpine: 50 fg on column S/N > 2000
• V.: < 5%
• Triple quad scan speed: 12,000 Da/sec
• Linear ion trap scan speed: 20,000 Da/sec
• Polarity switching time: 50 msec
• Minimum MRM Dwell Time: 1 msec
• Triple quad mass range (m/z): 5-1250
• Linear ion trap mass range (m/z): 50-1000
• Cross talk for Reserpine 609/195: No significant cross talk detectable with 1 msec dwell time and 3 msec inter-MRM pause time
• Triple quadrupole mass stability: 0.1 Da over 24 hours
• Scan types: Full scan MS and selected ion for both Q1 and Q3, product ion scan, precursor ion scan, neutral loss or gain scan, multiple reaction monitoring (MRM), enhanced MS scan, enhanced product ion scan, enhanced resolution scan, MS  scan, MRM3 scan, and TripleTrap scan modes

This LCMS brings you the best in quantitative sensitivity and robustness to expand upon the experiments going beyond MRM, and give you substantial improvements in data quality.

Includes:

• AB Sciex 4500 LC/MS/MS
• Shimadzu Prominence 20 UFLC  
• Shimadzu DGU-20A3 Degasser
• (2)Shimadzu LC_20AD Liquid Chromatograph
• Shimadzu CTO-20AC Column Oven
• Shimadzu SIL-20AC UFLC
• Windows 7 Computer Loaded with Analyst 1.6 Software       

Specifications:

• Sensitivity MRM: mode Reserpine 200 fg on column S/N > 2000  C.V. < 5%
• Maximum scan speed: 12,000 Da/sec
• Polarity switching time: 50 msec, in MRM and scheduled MRM (sMRM) modes
• Minimum MRM dwell time: 1 msec
• Mass range (m/z): 5-2000
• Cross talk for reserpine 609/195: <0.5% cross talk detectable with 2 msec dwell time and 3 msec inter-MRM pause time
• Triple quadrupole mass stability: 0.1 Da over 24 hours
• Scan types: Full scan MS and selected ion MS for both Q1 and Q3, product ion scan, precursor ion scan, neutral loss or gain scan, multiple reaction monitoring (MRM), and scheduled MRM (sMRM)
• Detector type: AcQuRate Pulse Counting CEM
• Dynamic range: 4 orders of magnitude
• Ionization sources: Turbo V source housing with TurboIonSpray probe or APCI probe.
• Maximum temperature: 750ºC
• Flow rate compatibility: 5 μL/minute to 3 mL/minute
• Power: 208V 50/60Hz AB Sciex 4500, 208V Vacuum Pump, 208V Peak N2 Generator, 115V Shimadzu UPLC
• Dimensions: 37" x 33" x 55" Sciex 4500
• Weight: 250lbs

Includes

• Gene Pulser II
• Capacitance Extender Plus
• Pulse Controller Plus

Optional Installation, Familiarization, and Extended Warranty available

Includes:

• G1322 Degasser
• G1311 Quarternary Pump or G1312A Binary Pump($1000 Less)
• G1313A Autosampler
• G1316A Column Compartment
• G1315A Diode Array Detector
• Computer Loaded with ChemStation
• Monitor – Mouse – Keyboard
• Cables and Manuals

The components can be customized to your needs.

Please let me know if I can be of any additional assistance.

Includes:

• Agilent G1322A Degasser
• Agilent G1311A Quat Pump
• Agilent G1329A Autosampler
• Agilent G1330A Autosampler Chiller
• Agilent G1365D DAD (Diode Array Detector)
• Agilent G1316A Column Compartment
• Solvent Tray
• Computer Loaded with ChemStation
• Cables and Manuals

Includes:
• G1311 Quarternary Pump or G1312A Binary Pump($1000 Less)
• G1329B Autosampler
• G1316A Column Compartment
• G4212B Dioade Array Detector
• Computer Loaded with OpenLab Software 
• Monitor – Mouse – Keyboard
• Cables and Manuals

The components can be customized to your needs.

Features:

This Agilent 1220 Infinity LC - G4294B has a Gradient Pump, Autosampler, Column oven and Diode Array Detector configuration. It also includes Agilent Instrument Utilities Software.

Specifications:

• Weight: 43 kg (94 lbs)

• Dimensions (height × width× depth): 640×370×485 mm (25.2×14.6×19.1 inches)

• Line frequency:  50 or 60 Hz, ± 5 %

• Power consumption: 240 VA / 210 W / 717 BTU

• Ambient operating temperature: 4–55 °C (39–131 °F)

• Ambient non-operating temperature: -40 – 70 °C (-40 – 158 °F)

• Humidity: < 95 % r.h. at 40 °C (104 °F)

The Agilent 1290 Infinity Binary LC is not only the most powerful but also the most adaptive UHPLC system available. No matter what your laboratory requires, the 1290 Infinity Binary LC can handle the widest range of applications; UHPLC methods, legacy HPLC methods, HPLC-to-UHPLC method transfer, method development, multi-compound screening, LC/MS coupling, and many more.

Features:

• Most adaptive  – emulates other HPLC and UPLC systems, connects to all Agilent and many non-Agilent software
• Highest performance & flexibility – by any measure
• HPLC-like service costs – UHPLC productivity

Includes:

• G1316C TTC Column Compartment
• G4226A Autosampler
• G1330B Autosampler Thermostat
• G4220A Binary pump
• Tray
• 1200 Instant Pilot