Used Lab Equipment

Description:

Incubating microplate shakers are ideal for cell cultures, hybridizations, and suspensions.

• Optimized for shaking microplates or microtubes
• Digital display for speed, temperature, and time
• Microprocessor control
• Timer with audible alarm

Microprocessor PID temperature controller maintains precise temperature control from 5° above ambient to 65°C (149°F). The triple eccentric drive features permanently lubricated ball bearings. The maintenance-free, brushless DC motor provides a long service life. A Lexan® polycarbonate lid permits viewing of samples from all sides without disturbing internal temperature. Platform dimensions: 19.7Wx27.9Dcm (73/4x11"). Optional microtube rack attaches to platform to hold 1.5 mL or 2 mL microtubes and has a capacity of 70 tubes. Units with opaque lid are designed for light sensitive samples. Easy-to-use controls allow user to adjust temperatures in 1°C increments. Built-in timer with LED display will show elapsed time, or, when programmed to user-defined limit, will count down to zero and shut off unit. Audible alarm sounds when time reaches zero. Holds four microplates or two microtube racks.

The Orbi-Shaker XL offers flask capacity that far exceeds that of most benchtop models. With a large 18 x 18 inch platform and a powerful, beltless motor drive, the Orbi-Shaker XL is capable of mixing up to five 2L flasks or nine 1L flasks simultaneously. The included, non-slip rubber mat platform is ideal for low speed applications.

Specification:

• Speed Range: 30 to 300 rpm
• Speed Increment: 1 rpm
• Orbit: 19mm
• Max. Capacity: 5 x 2L or 9 x 1L
• Max. Load: 65 lbs
• Platform Dimensions: 17.8" x 17.8"
• Timer: 1 min. to 48 hrs/continuous
• Weight: 65 lbs
• Dimensions: 18.5" x 21.25" x 5"

The Orbi-Shaker MP. is designed with a 3mm mixing orbit, optimized for thorough mixing of microplates and/or PCR plates. Up to four plates (standard or deep well) can be placed on the included platform and are instantly secured without the use springs, clamps or tools. A digital microprocessor ensures accurate speed control over the brushless, maintenance free motor drive and both speed and time can be viewed simultaneously on the large LED display.

Specifications:

• Speed: 200 to 1500 rpm
• Orbit: 3mm
• Max. Capacity: Up to 4 microplates
• Temp. Range: +4 to +65 C
• Dimensions: 11" x 10.7" x 4.5"
• Timer: 1 min. to 99 hours or continuous
• Weight: 12 lbs

Features:

The powerful Orbi-Shaker is capable of mixing a 14lb load capacity up to speeds as high as 300 rpm. The standard platform (included) features a non-slip, rubber coated surface, ideal for tissue culture flasks, petri dishes and staining trays.

The convenient MAGic Clamp™ platform (PATENT PENDING) is also available for use with Erlenmeyer flasks and test tube racks. The unique, magnetic attachment method (PATENTED) is the easiest way to instantly change between flask clamps of different sizes.

Specifications:

• Speed: Variable, 30 to 300 rpm
• Orbit:19 mm
• Max. Capacity: 5 x 1L (14 lbs / 6 kg)
• Speed Increment:1 rpm
• Platform Dimensions:13 x 12 in./ 33 x 30 cm (Included) 14 x 12 in./ 35 x 30 cm (MAGic Clamp)
• Operating Temp. Range +4 to +65°C
• Dimensions: (w x d x h) +4 to +65°C
• Weight: 25 lbs (11.25kg)
• Electrical:120V or 230V, 50-60Hz 600W

The Orbi-Shaker JR. is a personal sized orbital shaker including a 9.5x8" non-slip rubber platform, ideal for tissue culture flasks, Petri dishes and staining trays. The unique, magnetic attachment method is the easiest way to instantly change between flask clamps of different sizes. Mixing speed and run time are displayed on the large LED control panel located on the front side of the unit. The integral microprocessor includes a constant monitoring system that ensures accuracy through the duration of the program. Sophisticated over-temperature and over-speed controls ensure long life, safety and sample integrity.

Specification:

• Speed: Variable, 50 to 300 rpm
• Orbit: 19 mm
• Max. Capacity: 4 x 1L (9 lbs / 4 kg)
• Speed Increment: 10 rpm
• Platform Dimensions: 9.5 x 8 in./ 24 x 20 cm
• Operating Temp. Range: +4 to +65°C
• Dimensions (W x D x H): 13.1 x 11.74 x 4.7 in. (33 x 30 x 12 cm)
• Weight: 12 lbs (5.5kg)
• Electrical: Universal Voltage, 100-240V, 50-60Hz 250W

The Orbi-Shaker BT4000 is designed to fit and maximize capacity in most CO2 incubators. Adjust settings without disrupting the CO2 environment by remotely controlling the machine.

Specifications:

• Speed: Variable, 30 to 300 rpm
• Orbit: 19mm
• Max Capacity: 5 x 1 L
• Speed Increment: 1 rpm
• Platform Dimensions: 13 x 12"
• Cord Length: 605"
• Operating Temp: 0° to +65°C
• Dimensions: 11 x 13 x 3"
• Weight: 25 lbs
• Electrical: 120V or 230V

The new Orbi-Shaker CO2 series is designed for shaking, mixing aeration applications in extreme environments, including CO2 incubators. It can withstand temperatures from 0 to 60°C and humidity levels up to 100%. To avoid contamination, unintentional release of gas or deviations from protocol, all settings are adjusted via the included remote control module. This module can be stored outside of the chamber and connects to the shaker via a flat (1mm thickness) cable, that easily passes through a port or underneath an incubator door without compromising the seal. This allows for user adjustment of run time or mixing speed without opening the chamber door(s).

Specification:

• Speed: Variable, 30 to 300 rpm
• Orbit: 19mm
• Max. Capacity: 5 x 1L (14 lbs / 6 kg)
• Speed Increment: 1 rpm
• Platform Dimensions: 13 x 12 in./ 33 x 30 cm (Included)
• Cord Length: 60.5 in. / 154 cm
• Operating Temp. Range: 0° to +65°C
• Dimensions (W x D x H): 11 x 13 x 3 in. / 28 x 33x 7.5 cm
• Weight: 25 lbs (11.25kg)
• Electrical: 120V or 230V, 50-60Hz 600W

Features:

Lab-Line's Floor Model Environmental Shakers combine hydraulic temperature control and dependable mechanical timing with variable shaking speed in a controlled environment chamber. They are designed for growing and maintaining culture and microorganisms in ambient air or inert gas environments.
Provides uniform shaking motion in a controlled environment, features a triple eccentric drive. The lubricated bearings are permanently sealed for continuous use.

Specifications:

• Dimensions OA (cm): 56Dx86Wx37H cm
• Power requirements: 120VAC 60Hz 800W
• Operating temperature: Amb +5 to +60oC
• Load Capacity: 34 kg
• Electrical: 120V / 50/60Hz / 6.67A
• Power: 800W
• Temperature range: amb. +5 to 60°C
• Temperature control at 20°C (in flask): ±0.1°C
• Temperature uniformity at 20°C (in flask): ±0.5°C
• Chamber dimensions (W x H x D): 34 x 14.5 x 22 in. (86 x 37 x 56 cm)
• Overall dimensions (W x H x D): 43.5 x 33 x 30.5 in. (110 x 84 x 77 cm)

Description:

The Thermo Forma Model 4535 Incubator Shaker is a large-capacity environmental shaker that allows for uniform heating and motion and accurate regulation of shaking speed. This equilibration creates faster operation and enhances the productivity of laboratories with shaking requirements. The Forma 4535 is designed to accommodate a wide variety of flasks, tubes, and other glassware. Program and store up to three user-defined combinations for ease of use and quick parameter recovery.

Specifications:

• Max Speed: 525 RPM
• Shaking Accuracy: ± 1 RPM
• Max Temperature: 60°C
• Temperature Control: ± 0.1°C
• Temperature Uniformity: ± 0.2°C
• Orbital Diameter: 1 inch
• Timer: 5 min to 199.99 hours / hold
• Dimensions (H x W x D): 40.5 x 26 x 45 in
• Power Requirements: 115 V, 60 Hz, 8.6 A

The E-25R Classic Refrigerated Incubator Shakers are large capacity shakers utilizing a UniCentric single eccentric counterbalanced drive to provide horizontal plane rotary motion in a 2.54 cm (1 in) circular orbit. A Proportional/Integral (PI) Microprocessor controller with instantaneous digital feedback controls the speed over a range of 50-400 rpm.   

Specification:

• Shaking

• Speed: 50-400 rpm
• Control Accuracy: ± 1 rpm
• Indication: 3-digit LED, displayed in 1 rpm increments
• Stroke/Orbit: 2.54 cm (1 in)

• Temperature

• Range: 15°C below ambient temperature* (min. 4°C) to 60°C
• Control Accuracy: ± 0.1°C @ 37°C
• Indication: 3-digit LED, displayed in 0.1°C increments
• Ambient Operating Environment: 10 - 35°C, 20 to 80% relative humidity, non-condensing
• Refrigerant: R-134A
• Alarms: Visible and audible warning indication when speed deviates more than 5 rpm, and temperature more than 1°C from setpoints, and when timer has expired.
• Timer: 0.1 to 99.9 hours. Shuts off agitation at end of period. Can be deactivated for continuous operation.
• Automatic Restart: Automatic restart after power is restored. Setpoints and operating status are retained in memory during power interruption.
• Drive interrupt: Automatic drive-interrupt when cover is opened.
• Platform: 76 x 46 cm (30 x 18 in)
• Overall Dimensions (W x D x H): 127 x 77 x 85 cm (50 x 30.5 x 41.7 in)
• Chamber Dimensions (W x D x H): 85 x 58 x 48 cm clearance above platform (33.5 x 23 x 19 in)
• Net Weight: 204.5 kg (450 lb)
• Gross Weight: 281 kg (480 lb)

The New Brunswick G-25 Shaker Incubator is electronically controlled and built for continuous operation, providing many years of 24/7 service for incubation with shaking fermentation. The rugged G-25 shaker incubator offers dual thermostat control and monitoring. Should the control thermostat fail, a safety feature prevents overheating. A temperature rise over 2°C will also cause the safety to take over, which will be signaled by the lit safety pilot indicator

Specifications:

• External Dimensions (Lid Closed): 22 x 45.5 x 30.5 in
• Chamber Dimensions: 22 x 34.5 x 12.5 in
• Power Requirements: 120VAC, 60Hzm 10A
• Speed/Stroke: 40 – 400 rpm at 1” circle
• Operating Temperature: Ambient to 60 °C ± 0.5
• Capacity: 2L
• Speed Range: 40 – 400 rpm, 30-285 strokes/min
• Net Weight: 325 lbs

The new Incu-Shaker™ Mini is the most compact shaking incubator in its class. Despite the remarkably small footprint, a large 11.5 x 9.5 in. work space accepts several platforms for use with a variety of flasks, tubes and other common vessels.

The standard platform (included) features a non-slip rubber coated surface, ideal for tissue culture flasks, petri dishes and staining trays. The unique, magnetic attachment method is the easiest way to instantly change between flask clamps of different sizes. The integral microprocessor includes a constant monitoring system that ensures accuracy through the duration of the program. Sophisticated over-temperature and over-speed controls ensure long life, safety and sample integrity.

Specifications:

• Temperature Range: Ambient +5° to 70°C
• Temperature Increments: +0.1°C
• Temperature Uniformity: ±0.25°C
• Temperature Accuracy: ±0.1°C
• Shaking Speed Range: 30 to 300rpm
• Speed Increments: 1rpm
• Shaking Orbit: 19mm (4/4")
• Operating Temp Range: +4 to +65°C
• Platform Dimensions: 9.5 x 11.5 in./28 x 41 x 33 cm
• Exterior Dimensions (W x D x H): 11 x 18.8 x 13 in. / 28 x 48 x 33 cm
• Height /w lid open: 25 in. / 63 cm
• Timer: 1 min. to 48 hours / continuous
• Weight: 25 lbs (11.5kg)
• Electrical: 115 or 230V, 50-60Hz, 300W

Incu-Shaker™ 10L is a heavy-duty performer, designed for heavy workloads and continuous use. Its outstanding temperature accuracy and uniformity are supported by proprietary heat distribution technology that ensures that temperatures are precisely maintained throughout the chamber. Inconsistencies due to stratification are reduced to negligible levels and the selected temperature is precisely maintained within 0.25%, even in the corners. The powerful brushless induction drive is designed for years of trouble-free service, even under continuous use conditions with heavy loads. Noise and vibration are minimized by an advanced, computer designed motor isolation system. Like other Incu-Shaker models, the 10L is built to last. A standard, rubber mat platform is included and is ideal for use with tissue culture flasks, Petri dishes, staining trays and other flat vessels.

Specification:

• Speed: Variable, 30 to 300 rpm
• Orbit: 19mm / 3/4 in.
• Temp Range(10L): Room Temp. +5 to 60°C
• Temp Range(10LR): Room Temp. -15°C to 60°C
• Temp. Increment: 0.1°C
• Temp. Accuracy: +/- 0.1°C
• Temp. Uniformity: +/- 0.25°C

Incu-Shaker™ 10L is a heavy-duty performer, designed for heavy workloads and continuous use. Its outstanding temperature accuracy and uniformity are supported by proprietary heat distribution technology that ensures that temperatures are precisely maintained throughout the chamber. Inconsistencies due to stratification are reduced to negligible levels and the selected temperature is precisely maintained within 0.25%, even in the corners. The powerful brushless induction drive is designed for years of trouble-free service, even under continuous use conditions with heavy loads. Noise and vibration are minimized by an advanced, computer designed motor isolation system. Like other Incu-Shaker models, the 10L is built to last. A standard, rubber mat platform is included and is ideal for use with tissue culture flasks, Petri dishes, staining trays and other flat vessels.

Specification:

• Speed: Variable, 30 to 300 rpm
• Orbit: 19mm / 3/4 in.
• Temp Range(10L): Room Temp. +5 to 60°C
• Temp Range(10LR): Room Temp. -15°C to 60°C
• Temp. Increment: 0.1°C
• Temp. Accuracy: +/- 0.1°C
• Temp. Uniformity: +/- 0.25°C

Ideal for the culturing of non-adherent cells, the Incu-Shaker CO2 Mini combines a precision CO2 incubation chamber with an integral orbital shaker, providing the optimum conditions for suspension cell culture. The unique and proprietary heat distribution technology allows the incubator to provide the highest levels of temperature accuracy with minimal fluctuation (within 0.1°C). The six-side heating system in combination with a low speed internal fan uniformly spreads air throughout the stainless steel chamber (without air exchange from the external environment). For applications requiring solely gravity convection, this internal fan can be disabled, significantly reducing the concern of sample to sample contamination. A beltless motor drive provides a horizontally circular shaking motion at a consistent 19mm orbit. The included platform can be used for low speed shaking of a variety of laboratory vessels, including Erlenmeyer flasks, culture plates and media bottles.

Specifications:

• Temperature Range: Ambient +5° to 60°C
• Temperature Increments: 0.1°C
• Temperature Uniformity: ± 0.5°C*
• Temperature Accuracy: 0.1°C
• Speed Range: 30 to 300rpm
• Speed Increments: 1rpm
• Mixing Orbit: 19mm (3/4 in.)
• CO2 Range: 0 to 20%
• CO2 Increment: 0.1%
• CO2 Accuracy: ± 0.1%
• CO2 Sensor: Dual Beam IR
• Timer: 1 min. to 48 hours / continuous
• Platform Dimensions: 28 x 41 x 33 cm
• Chamber Dimensions: 33.5 x 26 x 39.2 cm
• Chamber Volume: 46L
• Chamber Material: Stainless Steel (316)
• Exterior Dimensions: 16.5 x 18.3 x 21.8 in. / 42 x 46.5 x 55.3 cm
• Weight: 90 lbs / 40.1 kg
• Electrical: 120V or 230V, 50-60Hz (350W)