Used Lab Equipment

Benchmark's Micro Bead Sterilizer is ideal for the sterilization of small research tools (forceps, scissors, etc.). When the chamber is filled with the included glass beads, high temperatures (up to 300°C) can be used to eliminate the presence of bacteria, spores and other microorganisms. Chamber temperature can be viewed on the large LED control panel and conveniently adjusted with the control knob. The supplied safety cover can be placed over the opening to conserve energy and reduce the heating/ramping rate. The Micro Bead Sterilizer does not use gas, flame or chemicals and is safe for use in hoods. This product is designed for research use only and not intended for clinical use.

Specification:

• Temp. Range: Adjustable, 100°C to 300°C
• Preheat Time: Approximately 25 min. (to 300°C)
• Chamber Diameter: 40 mm
• Chamber Height: 80 mm (B1201) ; 140 mm (B1202)

• Exterior Dimensions (W x D x H)

• B1201: 5.5 x 5.7 x 6.1 in. / 14 x 14.5 x 15.5 cm
• B1202: 5.5 x 5.7 x 8.5 in. / 14 x 14.5 x 21.5 cm
• Chamber Bead Capacity: 150g (B1201) / 300g (B1202)
• Weight: 2 kg (B1201) ; 2.5 kg (B1202)
• Electrical: 115 VAC or 230 VAC, 50-60Hz
• Power: 120W (B1201) / 250W (B1202)
• Operating Environment: 4°C to 45°C

Benchmark's Micro Bead Sterilizer is ideal for the sterilization of small research tools (forceps, scissors, etc.). When the chamber is filled with the included glass beads, high temperatures (up to 300°C) can be used to eliminate the presence of bacteria, spores and other microorganisms. Chamber temperature can be viewed on the large LED control panel and conveniently adjusted with the control knob. The supplied safety cover can be placed over the opening to conserve energy and reduce the heating/ramping rate. The Micro Bead Sterilizer does not use gas, flame or chemicals and is safe for use in hoods. This product is designed for research use only and not intended for clinical use.

Specification:

• Temp. Range: Adjustable, 100°C to 300°C
• Preheat Time: Approximately 25 min. (to 300°C)
• Chamber Diameter: 40 mm
• Chamber Height: 80 mm (B1201) ; 140 mm (B1202)

• Exterior Dimensions (W x D x H)

• B1201: 5.5 x 5.7 x 6.1 in. / 14 x 14.5 x 15.5 cm
• B1202: 5.5 x 5.7 x 8.5 in. / 14 x 14.5 x 21.5 cm
• Chamber Bead Capacity: 150g (B1201) / 300g (B1202)
• Weight: 2 kg (B1201) ; 2.5 kg (B1202)
• Electrical: 115 VAC or 230 VAC, 50-60Hz
• Power: 120W (B1201) / 250W (B1202)
• Operating Environment: 4°C to 45°C

Based on magnetic separation technology, the BeadRetriever System enables rapid purification and concentration of selected targets from a broad range of samples. Partnered with Dynabeads immunomagnetic separation (IMS) products, the BeadRetriever system provides an optimized solution for the detection of microorganisms of importance in the analysis of food, water, and other environmental samples.

Features:

• Magnetic Dynabeads particle-based microorganism purification
• Protocols included for Cryptosporidium, E. Coli 0157, EPEC/VTEC, Giardia, Legionella, Listeria and Salmonella.
• Automated processing of up to 15 samples in ~40 min
• High reproducibility and maximum performance of capture technology
• Simple, easy operation-complete processing through internal program
• Small footprint-uses only 11.8 in (30 cm) of bench depth

Specifications:

• Capacity: Up to 15 samples per run (3 x 5)
• Dimensions: 11.4 in. (W) x 11.4 in. (D) x 12.2 in. (H), 290 mm (W) x 290 mm (D) x 310 mm (H)
• For Use With (Equipment): BeadRetriever System
• Format: Strip Tubes
• High Throughput Compatibility: Automated Protocols
• Isolation Technology: Immunomagnetic Separation
• Product Line: BeadRetriever
• Product Size: 1 unit
• Run Time: 40 min (15 samples)
• Sample Volume: 50 µL to 1 mL
• Shipping Condition: Room Temperature
• Technology: Inverse Magnetic Bead Processing
• Type: Sample Processor

Features:

The OHAUS Explorer series of semi-micro balances is designed with the technology to ensure that the users very specific weighing results are accurate. These Explorer semi-micro balances are ideal for sophisticated laboratories that require accuracy and are looking for innovative technology to obtain measurement results.

Specifications:

• Dimensions (H x L x W): (13.8 in x 15.5 in x 9.1 in)
• Maximum Capacity: 51 g/120 g
• Readability: 0.01 mg;  0.1 mg
• Pan Size: 3.14 in
• Internal Calibration: AutoCal - Automatic
• Units of Measurement: Gram; Kilogram; Carat; Grain; Ounce; Ounce Troy Pennyweight; Momme; Tical; Mesghal; Tola; Custom
• Draftshield: yes
• Communication: 2 units of USB port and RS232 and an optional third port of either RS232 or Ethernet.
• Display: Full-color 5.7 in VGA, touch screen
• In-use cover: yes
• Linearity ±: 0.1 mg
• Pan Construction: Stainless Steel
• Repeatability (typical): 0.015 mg
• Stabilization Time: 8 s
• Tare Range: To capacity by subtraction
• Working Environment: 50°F - 86°F, 85%RH, non-condensing (10°C - 30°C, 85%RH, non-condensing)

Features:

The OHAUS Explorer series of semi-micro balances is designed with the technology to ensure that the users very specific weighing results are accurate. These Explorer semi-micro balances are ideal for sophisticated laboratories that require accuracy and are looking for innovative technology to obtain measurement results.

Specifications:

• Dimensions (H x L x W): (13.8 in x 15.5 in x 9.1 in)
• Maximum Capacity: 120 g/220 g
• Readability: 0.01 mg;  0.1 mg
• Pan Size: 3.14 in
• Internal Calibration: AutoCal - Automatic
• Units of Measurement: Gram; Kilogram; Carat; Grain; Ounce; Ounce Troy;  Pennyweight; Momme; Tical; Mesghal; Tola; Custom
• Draftshield: yes
• Auto Door: yes
• Built-in Ionizer: yes
• Communication: 2 units of USB port and RS232 and an optional third port of either RS232 or Ethernet.
• Display: Full-color 5.7 in VGA, touch screen
• In-use cover: yes
• Linearity ±: 0.1 mg
• Pan Construction: Stainless Steel
• Repeatability (typical): 0.015 mg
• Stabilization Time: 8 s
• Tare Range: To capacity by subtraction
• Working Environment: 50°F - 86°F, 85%RH, non-condensing (10°C - 30°C, 85%RH, non-condensing)

Specification:

• Dimensions (W x H x D): 660 x 1180 x 650 mm
• Power source: AC220/230/240V. 50/60Hz
• Power consumption: 4.0KW
• Sterilization temperature range: 105-135°C
• Maximum allowable pressure (gauge pressure): 0.26 Mpa
• Temperature display range: 5 to 137°C
• Warming temperature range: 45 to 60°C
• Agar dissolution range: 60 to 100°C
• Chamber material: SUS304 (Stainless steel)
• Sterilization timer: 1 to 250 minutes
• Auto start timer: 1 minutes to 7 days
• Pressure gauge: 0 to 0.4 Mpa

Features:

These compact portable sterilizers are ideal for laboratories that share equipment. Single-cycle models sterilize while dual-cycle models feature both sterilizing and drying cycles. Designed with rolling casters for excellent mobility and easy storage—just push it into a storage room when not in use to make room in your lab. Top mounted stainless steel door also saves space in your lab and provides easy loading.

The sterilizers feature fully automated operation. Simply place your load in the pressure chamber and enter all parameters with the easy-to-use keypad. The LED display shows set and actual temperature, as well as set time and time remaining.

Self-diagnostic circuitry monitors the temperature sensor, low-water sensor, and heater; alerts you with an audible and a visual alarm if a malfunction occurs. Additional safety features include a circuit breaker, safety pressure release valve, and a water level site glass.

Specifications:

• Chamber Capacity (cu ft)：1.8
• Chamber Capacity (Liters)：5
• 1Chamber Height (in)：25.8125
• Chamber Diameter (in)：11.8125
• Chamber Height (cm)：65.6
• Chamber Diameter (cm): 30
• Min Temperature (° F): 221
• Max Temperature (° F): 253
• Min Temperature (° C)：105
• Max Temperature (° C)：123
• Reservoir Capacity (Liters)：3
• Max Pressure (PSI)：29
• Width (in)：17 5/16
• Height (in)：42 ½
• Depth (in)：20 15/16
• Width (cm)：44
• Height (cm)：108
• Depth (cm)：53.2

Hot-air sterilizer meets the criteria of a medical device with a 111-liter chamber volume. Noiseless operation with a fine patented system of forced air flow in the chamber thanks to a built-in fan eliminating “cold air” area formation. High operation comfort; precise temperature and time regulation; three preset sterilization programs. Wide range of optional equipment and accessories and output option for a printer or PC connection.

Specifications:

• Interior of stainless steel material: volume (111 l), depth (390 mm), width (540 mm), height (530 mm)
• External dimensions: depth (640 mm), diameter of the air branch outer/inner (52/49 mm), width (760 mm), height (860 (N))
• Weight: 87 kg (gross)
• Heat emission at 250 °C: 760 W
• Air exchange speed at 250 °C: 49 cca/hour
• Working Temperature (from 10 °C above ambient temp): 250 °C

Features:

The Stericell line is used for hot-air sterilization of medical devices as well as materials with pre-set temperature and time parameters. It is built to have a quiet operation and is equipped with fine patent-protected system of forced air flow in the chamber. Ideal for medical and veterinary practices, clinics and hospitals, pharmacies, and laboratories.

Specifications:

• Dimensions: depth 640 mm x diameter of the air branch outer/inner 52/49mm x 760 mm
• Tray storage area: 520 x 335 mm
• Racks: 7 max
• Maximum weight per tray: 20 kg
• Maximum weight inside the oven: 50 kg
• Working temperature (beginning of the regulation): from 10 °C above ambient temp. to °C 250 °C
• Heat emission at 250 °C: 760 W
• Air exchange speed at 250 °C: 49 cca/hour
• Electricity - mains 50/60 Hz: max. power 1,9 kW
• Nominal voltage: 230 V
• Current: 8,3 A
• Chamber volume: 111-liter
• Working temperature: from +10°C over ambient temperature up to 250°C
• Noiseless operation with a fine patented system of forced air flow in the chamber thanks to a built-in fan eliminating “cold air“ area formation
• High operation comfort; precise temperature and time regulation; three preset sterilization programs
• Suitable for hot-air sterilization at health centers for laboratory purposes; potential use as an oven
• Model with a Fuzzy logic microprocessor control system; control elements situated on a foil keyboard, process information indicated on a LED display
• Wide range of optional equipment and accessories
• Output for a printer or PC connection
• Validation possibility (IQ , OQ)

Hot-air sterilizer meets the criteria of a medical device with a 22-liter chamber volume. Noiseless operation with a fine patented system of forced air flow in the chamber thanks to a built-in fan eliminating “cold air” area formation. High operation comfort; precise temperature and time regulation; three preset sterilization programs. Suitable for hot-air sterilization at health centers for laboratory purposes; potential use as an oven.

Specifications:

• Interior of stainless steel material: volume (22 l), depth (320 mm), width (240 mm), height (295 mm)
• External dimensions: depth (560 mm), diameter of the air branch outer/inner (52/49 mm), width (406 mm), height (604 (N))
• Weight: 36 kg (gross)
• Heat emission at 250 °C: 350 W
• Air exchange speed at 250 °C: 45 cca/hour
• Working Temperature (from 10 °C above ambient temp): 250 °C

Features:

The Stericell line is used for hot-air sterilization of medical devices as well as materials with pre-set temperature and time parameters. It is built to have a quiet operation and is equipped with fine patent-protected system of forced air flow in the chamber. Ideal for medical and veterinary practices, clinics and hospitals, pharmacies, and laboratories.

Specifications:

• Dimensions: depth 560mm x diameter of the air branch outer/inner 52/49 mm x 406 mm
• Tray storage area: 185 x 265 mm
• Racks: 4 max
• Maximum weight per tray: 10 kg
• Maximum weight inside the oven: 25 kg
• Working temperature (beginning of the regulation): from 10 °C above ambient temp. to °C 250 °C
• Heat emission at 250 °C: 350 W
• Air exchange speed at 250 °C: 45 cca/hour
• Electricity - mains 50/60 Hz: max. power 0,96 kW
• Nominal voltage: 230 V
• Current: 4,2 A

• Chamber volume: 22-liter

•  

  Working temperature: from +10°C over ambient temperature up to 250°C

• Noiseless operation with a fine patented system of forced air flow in the chamber thanks to a built-in fan eliminating “cold air“ area formatio
• High operation comfort; precise temperature and time regulation; three preset sterilization program
• Suitable for hot-air sterilization at health centers for laboratory purposes; potential use as an ove
• Model with a Fuzzy logic microprocessor control system; control elements situated on a foil keyboard, process information indicated on a LED display
• Wide range of optional equipment and accessories
• Output for a printer or PC connection
• Validation possibility (IQ , OQ)

Hot-air sterilizer meets the criteria of a medical device with a 222-liter chamber volume. Suitable for hot-air sterilization at health centers for laboratory purposes; potential use as an oven. Model with a Fuzzy-Logic microprocessor control system; control elements situated on a foil keyboard, process information indicated on a LED display. Wide range of optional equipment and accessories and output option for a printer or PC connection.

Specifications:

• Interior of stainless steel material: volume (222 l), depth (540 mm), width (540 mm), height (760 mm)
• External dimensions: depth (790 mm), diameter of the air branch outer/inner (52/49 mm), width (760 mm), height (1090 (N))
• Weight: 116 kg (gross)
• Heat emission at 250 °C: 990 W
• Air exchange speed at 250 °C: 24 cca/hour
• Working Temperature (from 10 °C above ambient temp): 250 °C

Features:

The Stericell line is used for hot-air sterilization of medical devices as well as materials with pre-set temperature and time parameters. It is built to have a quiet operation and is equipped with fine patent-protected system of forced air flow in the chamber. Ideal for medical and veterinary practices, clinics and hospitals, pharmacies, and laboratories.

Specifications:

• Dimensions: depth 790 mm x diameter of the air branch outer/inner 52/49mm x 760 mm
• Tray storage area: 520 x 485 mm
• Racks: 10 max
• Maximum weight per tray: 30 kg
• Maximum weight inside the oven: 70 kg
• Working temperature (beginning of the regulation): from 10 °C above ambient temp. to °C 250 °C
• Heat emission at 250 °C: 990 W
• Air exchange speed at 250 °C: 24 cca/hour
• Electricity - mains 50/60 Hz: max. power 1,9 kW
• Nominal voltage: 230 V
• Current: 8,3 A
• Chamber volume: 222-liter
• Working temperature: from +10°C over ambient temperature up to 250°C
• Noiseless operation with a fine patented system of forced air flow in the chamber thanks to a built-in fan eliminating “cold air“ area formation
• High operation comfort; precise temperature and time regulation; three preset sterilization programs
• Suitable for hot-air sterilization at health centers for laboratory purposes; potential use as an oven
• Model with a Fuzzy logic microprocessor control system; control elements situated on a foil keyboard, process information indicated on a LED display
• Wide range of optional equipment and accessories
• Output for a printer or PC connection
• Validation possibility (IQ , OQ)

Hot-air sterilizer meets the criteria of a medical device with a 222-liter chamber volume. Noiseless operation with a fine patented system of forced air flow in the chamber thanks to a built-in fan eliminating “cold air” area formation. High operation comfort; precise temperature and time regulation; three preset sterilization programs. Wide range of optional equipment and accessories and output option for a printer or PC connection.

Specifications:

• Interior of stainless steel material: volume (404 l), depth (540 mm), width (540 mm), height (1410 mm)
• External dimensions: depth (790 mm), diameter of the air branch outer/inner (52/49 mm), width (760 mm), height (1910 (K))
• Weight: 175 kg (gross)
• Heat emission at 250 °C: 1940 W
• Air exchange speed at 250 °C: 18 cca/hour
• Working Temperature (from 10 °C above ambient temp): 250 °C

Features:

The Stericell line is used for hot-air sterilization of medical devices as well as materials with pre-set temperature and time parameters. It is built to have a quiet operation and is equipped with fine patent-protected system of forced air flow in the chamber. Ideal for medical and veterinary practices, clinics and hospitals, pharmacies, and laboratories.

Specifications:

• Dimensions: depth 790 mm x diameter of the air branch outer/inner 52/49mm x 760 mm
• Tray storage area: 520 x 485 mm
• Racks: 19 max
• Maximum weight per tray: 30 kg
• Maximum weight inside the oven: 100 kg
• Working temperature (beginning of the regulation): from 10 °C above ambient temp. to °C 250 °C
• Heat emission at 250 °C: 1940 W
• Air exchange speed at 250 °C: 18 cca/hour
• Electricity - mains 50/60 Hz: max. power 3,7 kW
• Nominal voltage: 400/3NPE V
• Current: 5,6 A
• Chamber volume: 404-liter
• Working temperature: from +10°C over ambient temperature up to 250°C
• Noiseless operation with a fine patented system of forced air flow in the chamber thanks to a built-in fan eliminating “cold air“ area formation
• High operation comfort; precise temperature and time regulation; three preset sterilization programs
• Suitable for hot-air sterilization at health centers for laboratory purposes; potential use as an oven
• Model with a Fuzzy logic microprocessor control system; control elements situated on a foil keyboard, process information indicated on a LED display
• Wide range of optional equipment and accessories
• Output for a printer or PC connection
• Validation possibility (IQ , OQ)