We offer an assortment of refurbished and used Microscopes ranging from Inverted Microscopes, Compound Microscopes, Fluorescence Microscopes, Stereo/Dissecting Microscopes, and Biological Microscopes to Polarizing Microscopes. Some of our popular manufacturers include Nikon, Olympus, Zeiss, and Leica. We also feature microscope cameras, objectives and stands. Additionally, we sell a wide selection of Scanning Electron Microscopes including Hitachi and JEOL. Browse our used microscopes below.
The Gemini XPS Fluorescence Microplate Reader uses dual monochromators for variable wavelength selection between 250 nm and 850 nm to eliminate the need for searching out the right pair of excitation and emission filters. Dual monochromators also enable wavelength scanning across a range of wavelengths in increments as small as 1 nm to optimize assay parameters.
The Gemini XPS Microplate Reader supports a multitude of fluorescence assay categories including:
Incubating microplate shakers are ideal for cell cultures, hybridizations, and suspensions.
Microprocessor PID temperature controller maintains precise temperature control from 5° above ambient to 65°C (149°F). The triple eccentric drive features permanently lubricated ball bearings. The maintenance-free, brushless DC motor provides a long service life. A Lexan® polycarbonate lid permits viewing of samples from all sides without disturbing internal temperature. Platform dimensions: 19.7Wx27.9Dcm (73/4x11"). Optional microtube rack attaches to platform to hold 1.5 mL or 2 mL microtubes and has a capacity of 70 tubes. Units with opaque lid are designed for light sensitive samples. Easy-to-use controls allow user to adjust temperatures in 1°C increments. Built-in timer with LED display will show elapsed time, or, when programmed to user-defined limit, will count down to zero and shut off unit. Audible alarm sounds when time reaches zero. Holds four microplates or two microtube racks.
Optimized sensitivity and selectivity, for reliable quantitative and qualitative information
The Agilent 1100 Series fluorescence detector provides high-sensitivity multisignal detection, online fluorescence spectra, straightforward Operation and maintenance, and built-in features for GLP compliance.
The 1100 HPLC G1321A Fluorescence Detector brings high-sensitivity and selection through simultaneous multi-wavelength detection. This easy-to-use detector provides quantitative data and fluorescence spectra from a single run. The FD's spectral information can be used for rapid method optimization and verification of separation quality.
The Waters 2475 Fluorescence Detector offers unsurpassed sensitivity for quantifying low concentrations of target compounds, whether naturally fluorescent or derivatized with a fluorescent tag. The 2475 FLR Detector sets the standard for fluorescence method development with 3D and “on-the-fly” spectral scanning for determining the optimal emission and excitation wavelengths, and has the ability to monitor up to four independent wavelength pairs.
The Waters 474 Scanning Fluorescence Detector can be used for in-vitro diagnostic testing to analyze many compounds, including diagnostic indicators and therapeutically monitored compounds.
This is a used Chiu technical fo-150 lumina fiber optic illuminator light source
Fuse: 5x20mm 3.15 AmpF
Output: 150 Watts
Input: 115v 60Hz 3 Amp
This compact device is the ideal external light source for fluorescence excitation in microscopy. Coupling is preferably achieved via liquid light guides. The average service life of a lamp is 2,000 hours. The optimised internal air flow cools the lamp and enables quiet operation. A resettable operating hour meter shows lamp operating hours. The brightness of the lamp output can be varied in 5 steps (0-100%) by means of a mechanical dimmer unit. An ultra-fast shutter opens or closes after activation with approx. 6 ms. The shutter is actuated by means of an appliance switch, but is also possible externally by means of a remote control input or CAN-BUS connection. This compact light source is available as a VIS or UV version in addition to a version that permits the coupling of multi-pin liquid light guides.
The Lumen 200 Fluorescence Illumination System is a powerful, cost effective alternative to standard 100 Watt mercury and halogen lamphouses. The combination of Prior's proprietary 2,000 hour life, 200 watt metal arc lamp and two or three meter liquid light guide provide unrivalled versatility and illumination power. The Lumen 200 utilizes a metal halide lamp rather than the more traditional high pressure mercury or xenon burners. This means 2000 hours of stable output compared to a maximum of 300 hours for a mercury lamp.
Asking Price: $4500 w/ 1 year manufacturer warranty and 25,000 hour lamp guarantee
List Price: $4995 (We are discounting 10% off List)
Includes: X-Cite 110LED, speedDIAL remote, 3mm x 1500mm Liquid Light Guide, Accessory Kit (tools, USB cable, power cord)
Does not include Microscope Adaptor
The new X-Cite 110LED from Excelitas Technologies is a compact, white light LED light source for fluorescence imaging applications. Providing excitation for DAPI, GFP, mCherry and Cy5 routine imaging, the X-Cite 110LED offers exceptional field uniformity through liquid light guide delivery. With manual, PC and TTL control, the X-Cite 110LED has LEDs guaranteed for 25,000 hours with no lamps or modules to replace. X-Cite 110LED is the newest addition to the X-Cite family which is known for high quality, reliability and exceptional delivery.
Includes: Collimating adaptor, Liquid Light Guide
Also Available Used: $2500 without Collimating Adapter
Also ask us about replacement Accessories such as Light Guides and Lamps!