Used Lab Equipment

Description: FlexiFuge is a versatile, personal micro-centrifuge for quick, low speed centrifugation. Whisper quiet motor offers two speeds (2000g / 5,000g or 9,200 RPM) depending on application. FlexiFuge can be operated in continuous mode, pulsed for a short burst of rapid centrifugation, or timed to spin from 1-15 minutes. Regardless of setting, rotors stop once the lid release button is pushed. A ring of LED lights illuminate when the unit is active and can be viewed through the transparent lid. Color can be changed (red, green, blue) or turned off by a switch under the unit. FlexiFuge is supplied with an 8-Place fixed angle rotor for 1.5mL tubes, a rotor for (4), 8 x.2mL PCR tube strips, 8 adapters for .5mL tubes and a 4-place rotor to spin 5mL micro-centrifuge tubes.

Specifications:

• Speed (Slow): 6000 rpm

• Speed (Fast): 9200 rpm

Relative Centrifugal Force

• 1.5ml Rotor (6000 rpm): 2012G

• 0.2ml PCR Strip (6000 prm): 1509G

• 5ml Rotor (6000 rpm): 2414G

• 1.5ml Rotor (9200 rpm): 4731G

• 0.2ml PCR Strip (9200 prm): 3549G

• 5ml Rotor (9200 rpm): 5677G

• Noise Level: <65dB

• Power Requirements: 100-240V~ 1.0A; 50/60Hz

• Spin Modes: Continuous, Timed, and Quick-Spin

• Timer: 1 to 15 minutes

• Dimensions (L x W x H with lid closed)- in: 9.45 x 7.36 x 5.47

• Dimensions (L x W x H with lid closed)- mm: 240 x 187 x 139

• Weight (lbs): 3.6

Weight (kg): 1.6

Features:

FRONTIER 5000 SERIES MULTI mini

Specifications:

• Speed Range: 0 rpm – 6,000 rpm
• Maximum Relative Centrifuge Force (x g): 2,000 g
• Maximum Capacity (Rotor): 8 x 1.5 / 2.0 ml
• Item Number: 30134157

Specifications:

• Speed: 10,000 RPM
• Timer: 12 minutes

The VWR Mini Centrifuge is designed for the centrifugation of microcentrifuge tubes and PCR strips. It id equipped with quick-release rotor adpter, includes innovative dual safety lid and a rubber coated base plate offers improved stability and reduced vibration.

Specifications:

• Speed Rating: 8500 rpm
• Maximum RCF: 3884 rcf
• Rotor Capacity: 8 x 1.5/2.0 mL

The VWR 200 Mini-stirrer is a compact educational stirrer featuring a durable cast aluminum top plate. Powerful motor and magnet deliver reliable and consistent stirring.

Features:

• Capacity: 1000mL of water.
• Adjustable Electronic speed control: 100 to 1200rpm
• Built-in support rod holder with locking knob allows a 1.27cm (1/2") rod (not included) to be directly attached to the unit.
• Plate Dimensions: 4"W x 6.25"D

Rugged, compact hotplate stirrers feature an ergonomic design and are ideal for educational labs. These units can heat and stir up to 1000 mL of water. Durable cast aluminum top plate will not chip or crack, and provides a uniform heating surface.

Specifications:

• Power Requirements: 120V, 325W

• Dimensions: 4 x 5 in

Despite the space-saving exterior dimensions of the Bioclaves, the stainless steel chambers are surprisingly large, accommodating a variety of liquids, media, instruments, glassware, plasticware and other common research laboratory items. Both of these benchtop models include a mechanical and electrical safety interlock that prevents the door from being opened until the pressure has reached zero PSI. With a large digital display and fully automatic operation, all segments of the cycle (fill, sterilize, exhaust and dry) commence and run to completion by simply pressing the start button. The 8 liter BioClave Mini is preprogrammed to meet basic sterilization needs. Temperature can be selected at either 121°C or 134°C, and the sterilization time is fully adjustable. The economical BioClave Mini is the ideal choice wherever benchtop sterilization is required and space is limited.

Specification:

• Chamber Volume: 8L
• Max. Pressure: 29 PSI / 2 Bar
• Chamber Dimensions: 6.7 x 12.5 in. / 17 x 31 cm
• Tray Dimensions: 4.75 x 9.75 in. / 12 x 24.8 cm
• Dimensions (W x D x H): 20 x 13.5 x 12.9 in. / 51 x 34 x 33 cm
• Weight: 74 lbs (33 kg)
• Electrical: 120 or 230V, 50-60Hz 950W

The Mini BlotBoy and BlotBoy can accept stackable platforms and handle loads up to 2kg. Both have maintenance free brushless motors and are safe for use in cold rooms and incubators. Modeled after our popular BioMixer series of "nutating" shakers, these platform rockers provide the perfect 3-dimensional motion for all blot related applications. Their tilt angle and speed have been optimally set for gentle, but thorough mixing in gel trays, boxes and other flat vessels. Mini BlotBoy and BlotBoy come standard with autoclavable flat mats and are ideal for blot washes and gel staining/destaining. Both models have been designed to conserve bench space. The Mini BlotBoy is supplied with a 10.5 x 7.5 inch platform while the larger BlotBoy's 12 x 12 inch platform expands the useable work surface by 80%.

Specification:

• Speed: 12 rpm (Speed of 230V model is 10 rpm)
• Tilt Angle: +/- 8 degrees
• Platform Size: 10.5 x 7.5 in. / 27 x 19 cm
• Load Capacity: 1.6 kg / 3.5 lbs.
• Operating Temp. Range: +4°C to +65°C
• Dimensions (W x D x H): 10.5 x 7.5 x 8 in.
• Weight: 2.0 kg / 4.4 lb
• Electrical: 115V AC, 60 Hz, 0.4A / 230V AC, 50 Hz, 0.2A

The Mini Gel Tank is compatible with a variety of Novex mini gels, NuPAGE mini gels, and Bolt Bis-Tris Plus gels. Each Mini Gel Tank can accommodate up to two gels per run. The unique tank design enables convenient side-by-side gel loading and enhanced viewing during use. Optimized conditions using constant voltage allow for Bolt Bis-Tris Plus gels to be run in approximately 35 minutes. Run times may vary depending on buffer conditions and power supplies being used.

Specifcations:

• Capacity: Up to 2 gels per run
• Gel Compatibility: Bolt Bis-Tris Plus Gels, Novex Mini Gels

The unique design of the Mini Gel Tank allows users to run mini gels quickly, easily, and leak-free without any clamps or grease. The set-up time is only 30 seconds: dropping the cassette clamps into the electrophoresis tank, insert the gels, and pull the cassette clamp forward. The no-leak seal feature results in no mess and consistent performance.

Specification:

• Dimensions: 11 x 12 x 16 cm
• Buffer Chamber Capacity: 400 mL
• Material: Acrylic
• Electrode Wire: Platinum (0.010” diameter)
• Electrical Limits: 500 VDC or 100 Watts
• Operating Temperature: 15ËšC to 30ËšC
• Temperature Limit: 40°C

Description:
The VWR Mini Stirrer is a rugged, compact stirrer with an ergonomic design and can stir up to 1000mL of water.
It is energy efficient by running only when needed and stops after operation.
It is equipped with an optional support plate that allows hot plate to be mounted to lab frames or ring stands

Specifications:
⦁ Rugged 5x5" aluminum top plate
⦁ Maximum Capacity: 1000mL
⦁ Speed Range: 100 - 1200rpm
⦁ Electrical Requirements: 120V,50/60Hz

Benchmark's TC-32 Mini Thermal Cycler retains the advanced programming features, easy to use software and fast, reliable cycling of the larger TC-9639 Thermal Cycler, but with a smaller block and lower price point. Designed for lower throughput needs, the TC-32 Mini Thermal Cycler has a capacity for 32x0.2ml tubes. The wells are arranged in a 4x8 format, allowing the block to accept strips of 8 as well as individual tubes. The block heats and cools very quickly - at rates as fast as 5°C/second. A proprietary algorithm controls block temperature, bringing samples quickly to the target temperature without any over- or under-shoot. Excellent block uniformity ensures consistency sample to sample. The heated lid is self adjusting - the spring loaded platen in the lid comes firmly into contact with the tops of the tubes to prevent sample evaporation and condensation. There are no knobs to turn or levers to adjust. The temperature of the heated lid can be changed or the heating function of the lid may be turned off.

Specification:

• Capacity:

• 0.2ml tubes: 32
• Strip tubes: 4 x 8 tube strips
• Temp. control range: 0°-99.9°C
• Temp. control: Simulated sample or block
• Accuracy/uniformity: ±0.25°C/±0.25°C

• Ramp rate:

• Heating: 5ºC/second
• Cooling: 4ºC/second
• Lid temp.: 30°-112°C, user adjustable
• Program memory: Over 100 typical programs
• Increments/decrements: Yes, time and temperature
• Power supply: Universal, 100-240V, 50-60Hz
• Dimensions (W x D x H): 7.2 x 9.2 x 6.2 in. / 18.2 x 23.2 x 15.7 cm
• Weight: 6.4 lbs / 2.9 kg

Accepts tubes and vessels of all sizes. Fisherbrand Mini Vortex Mixer is an extremely compact vortex mixer with a horizontally circular, orbital mixing motion.

Specifications:

• Speed: Fixed 2800 rpm
• Orbit: 5 mm
• Dimensions: 96 x 97 x 64 mm
• Weight:5 kg
• Electrical: 100-240V, 50-60Hz

The Accuris myGel Mini electrophoresis system includes all of the equipment that you need to get up and running - gel tank, power supply and two casting sets. Ideal for personal use, small laboratories or the classroom, this gel box/power supply combination is compact and easy to use. The myGel mini gel box attaches directly to the power supply for a secure connection every time. Selectable parameters include 3 preset voltages - 35V, 50V or 100V - and a 99 minute timer. All are set using the membrane keypad. The safety lid is vented to help dissipate heat generated during electrophoresis, and features a viewing area above the gel. Current will only run through the system when the lid is properly in place on top of the gel box.

Specification:

• Output Voltage: 35V, 50V or 100V
• Timer: 0-99 min. or Cont.
• Safety: Lid interlock
• Max. Buffer (ml): 230
• Gel Capacity: 10.5 x 6cm Two: 5 x 6 cm
• Weight: 1 lbs / 0.45 kg
• Dimensions: 7.5 x 5.1 x 2.1 in
• Electrical: 115V or 230V, 50-60Hz

With digital temperature control, these incubators provide convenient operation, eliminating the need for external thermometers and repetitive “fine tuning” of an analog control knob.  Features large internal chambers, capable of storing flasks and bottles, includes two adjustable shelves and an internal outlet for powering smaller shakers, rockers and other instrumentation.

Specifications:

• Capacity: 20 L (0.75 cu. ft.)
• Temperature Range: Ambient +5°C to 60°C
• Operating Temperature Range: 4° to 65°C
• Temperature Accuracy: 0.5°C (at 37°C)
• Temperature Uniformity: ± 1.5°C (at 37°C)
• Temperature Increment: 1°C
• Dimensions: 13.2” x 14.5” x 18.7” in (W x D x H)