Used Lab Equipment

Description:

With average temperature uniformity of ±0.3°C (±0.5°C absolute), these incubators operate within much tighter tolerances than gravity convection incubators.
Built-in PID microprocessor-based controller for close uniformity with set temperatures
Can set temperatures up to 75°C in 0.1°C increments using the keys on the control panel
Actual temperature is displayed (to the nearest 0.1°C) on the bright, three-digit LED display
If actual temperature exceeds setpoint by 3°C, a visual alarm will signal on the control panel
Tempered glass inner door to view samples
Temperature recovery is within two minutes
Heavy-duty steel/aluminum exterior; stainless-steel interior surrounded by 3 in. thick (7.6cm) insulation in the walls and 1.5 in. (3.8cm) in the door
5-amp electrical outlet to support other apparatus

Specifications:

Temperature range: 5 to 75°C
Capacity: 3.8 cu ft, 96.3L
Material: Steel/aluminum
Interior Dimensions: 17 x 18 x 19 in.
Exterior Dimensions: 26 x 23.5 x 33 in.

This Fisher Scientific Isotemp 655D gravity-convection incubator has digital readout and steady, unobstructed airflow and efficient heating. Designed for drying & staining of slides, tissue culture work, incubation of antibody tests, curing, pharmaceutical stability tests, microbiological determinations, crystallization studies, incubation of hydroxy-steroids and similar applications. Has a tight fitting, transparent tempered inner glass door to allow you view specimens without disturbing chamber temperature.

Specifications:

• Temperature Range: 30°C - 60°C
• Temperature Uniformity:+/- 1.5°C
• Ventilation Rate:12 exchanges/hour
• Chamber Capacity:5 cubic feet
• Dimensions:20 x 24 x 20 in
• Power Requirements: 115V, 20.A

Features:

This VWR dry bath/incubator is a multi-purpose unit ideal for incubation and activation of cultures, enzyme reactions, blood urea nitrogen determinations, immunoassays, melting/boiling points, and a variety of other laboratory procedures. These high wattage, constant-temperature block heaters are economical and versatile. Requires minimum bench space and features convenient front-mounted temperature adjustment knobs providing high and low temperature control. Accepts separate interchangeable modular blocks (can be purchased separately), which accommodate various sample enclosures such as vials, microplates, PCR strips, and a wide variety of tubes. Each block contains a thermometer well, and features close tube-and-block contact for maximum heat retention.

Specifications:

Temperature Range: 5° above ambient to 150°C

Temperature Stability: ±2°C

Temperature Uniformity: ±5°C

The Labnet Accublock is microprocessor controlled and offers both single and dual block models. There's a digitial display, user-friendly calibration, block lifter supplied, exceptional value and is made of anodized aluminum. 

Specifications:

• Broad Temperature Range: Ambient 5°C up to 150°C
• Tube Capacity: 0.2 mL up to 50 mL as well as PCR plates

Description:

The BEING Cooling Incubators allows the user to conduct applications that require temperatures ranging from -10° to +80°C. These incubators are ideal for biochemical oxygen demand testing, bacterial research, seed germination, fish/insect breeding and much more. The BEING Cooling Incubator provides accurate and dependable temperature control. Rapid cooling does not come at the expense of the environment. BEING uses environmentally friendly refrigerants.

Features:

• Colorful LCD display.
• Our BEING controller uses advanced control technology, allowing the smooth transition from cooling to heating and heating to cooling
• Interior Chamber made from 304 stainless steel with a mirror polished finish making for easy cleaning
• 25mm test hole allows real time testing of internal chamber temperature using external temperature measuring equipment
• Pt100 temperature sensor provides high temperature sensitivity and accuracy.
• BOD Socket
• The BEING Controller provides programmability for 7 periods and 9 steps for each period making for a total of 63 programmable steps

Specifications:

• Usable Volume: 4.2 cubic ft (120 L)
• Temperature Range: 14°F ~ 176°F (-10°C ~ 80°C)
• Temperature Homogeneity (at 77°F): ±1.8°F (±1°C)
• Temperature Variation:
  • High: ±0.54°F (±0.3°C)
  • Low: ±0.9°F (±0.5°C)
• Temperature Resolution: 0.1
• Timer: 1~5999 min
• Number of Shelves: 3
• Net Weight: 100 kg
• Interior Dimension (W x H x D): 19.7 x 23.6 x 15.8” (500 x 600 x 400 mm)
• Exterior Dimension (W x H x D): 26.0 x 45.3 x 27.0” (645 x 1150 x 685 mm)
• Electrical Requirement: 120 V, 60 Hz
• Power Consumption: 1500 W

Description:

The BEING Cooling Incubators allows the user to conduct applications that require temperatures ranging from -10° to +80°C. These incubators are ideal for biochemical oxygen demand testing, bacterial research, seed germination, fish/insect breeding and much more. The BEING Cooling Incubator provides accurate and dependable temperature control. Rapid cooling does not come at the expense of the environment. BEING uses environmentally friendly refrigerants.

Features:

• Colorful LCD display.
• Our BEING controller uses advanced control technology, allowing the smooth transition from cooling to heating and heating to cooling
• Interior Chamber made from 304 stainless steel with a mirror polished finish making for easy cleaning
• 25mm test hole allows real time testing of internal chamber temperature using external temperature measuring equipment
• Pt100 temperature sensor provides high temperature sensitivity and accuracy.
• BOD Socket
• The BEING Controller provides programmability for 7 periods and 9 steps for each period making for a total of 63 programmable steps

Specifications:

• Usable Volume: 8.9 cubic ft (252 L)
• Temperature Range: 14°F ~ 176°F (-10°C ~ 80°C)
• Temperature Homogeneity (at 77°F): ±1.8°F (±1°C)
• Temperature Variation:
  • High: ±0.54°F (±0.3°C)
  • Low: ±0.9°F (±0.5°C)
• Temperature Resolution: 0.1
• Timer: 1~5999 min
• Number of Shelves: 3
• Net Weight: 120 kg
• Interior Dimension (W x H x D): 23.6 x 27.6 x 23.6” (600 x 700 x 600 mm)
• Exterior Dimension (W x H x D): 27.4 x 49.2 x 34.8” (695 x 1250 x 885 mm)
• Electrical Requirement: 120 V, 60 Hz
• Power Consumption: 1700 W

Description:

The BEING Cooling Incubators allows the user to conduct applications that require temperatures ranging from -10° to +80°C. These incubators are ideal for biochemical oxygen demand testing, bacterial research, seed germination, fish/insect breeding and much more. The BEING Cooling Incubator provides accurate and dependable temperature control. Rapid cooling does not come at the expense of the environment. BEING uses environmentally friendly refrigerants.

Features:

• Colorful LCD display.
• Our BEING controller uses advanced control technology, allowing the smooth transition from cooling to heating and heating to cooling
• Interior Chamber made from 304 stainless steel with a mirror polished finish making for easy cleaning
• 25mm test hole allows real time testing of internal chamber temperature using external temperature measuring equipment
• Pt100 temperature sensor provides high temperature sensitivity and accuracy.
• BOD Socket
• The BEING Controller provides programmability for 7 periods and 9 steps for each period making for a total of 63 programmable steps

Specifications:

• Usable Volume: 2.4 cubic ft (68 L)
• Temperature Range: 14°F ~ 176°F (-10°C ~ 80°C)
• Temperature Homogeneity (at 77°F): ±1.8°F (±1°C)
• Temperature Variation:
  • High: ±0.54°F (±0.3°C)
  • Low: ±0.9°F (±0.5°C)
• Temperature Resolution: 0.1
• Timer: 1~5999 min
• Number of Shelves: 2
• Net Weight: 85 kg
• Interior Dimension (W x H x D): 15.8 x 17.7 x 15.0” (400 x 450 x 380 mm)
• Exterior Dimension (W x H x D): 21.5 x 39.4 x 26.0” (545 x 1000 x 660 mm)
• Electrical Requirement: 120 V, 60 Hz
• Power Consumption: 1300 W

Description:

Laboratory incubator applications are diverse because of the many different industries and protocols they are used for, so we have designed the BEING LAB Incubator family to accommodate a wide range of applications. The BEING Controller guarantees temperature accuracy and control. We engineer the best safety features into all our products ensuring peace of mind to our customers.

Features:

• Colorful LCD display
• Adjustable Fan Speed allows user to regulate air flow around samples
• Double door with inner glass door allowing full width viewing of samples making for easy cleaning
• Interior Chamber made from 304 stainless steel with a mirror polished finish
• Anti-tilt shelving helps avoid accidents when shelves are moved
• Top centered portal allows real time testing of internal chamber temperature using external temperature measuring equipment
• Pt100 temperature sensor provides high temperature sensitivity and accuracy
• The BEING Controller provides programmability for 7 periods and 9 steps for each period making for a total of 63 programmable steps

Specifications:

• Chamber Volume: 5.2 cubic ft (146 L)
• Temperature Range: Ambient + 9°F ~ 176°F (Ambient + 5°C ~ 80°C)
• Temperature Stability: 0.36°F (0.2°C)
• Display: 0.1
• Standard/Max Quantity of Shelves: 2/10
• Max. load per shelf: 20 kg
• Net Weight: 82 kg
• Time: 1~5999 min
• Internal Dimension (W x H x D): 20.5 x 20.9 x 20.9” (520 x 530 x 530 mm)
• External Dimension (W x H x D): 30.9 x 29.3 x 27.0” (785 x 745 x 685 mm)
• Electrical Requirement: 120 V, 60 Hz
• Power Consumption: 600 W

Description:

Laboratory incubator applications are diverse because of the many different industries and protocols they are used for, so we have designed the BEING LAB Incubator family to accommodate a wide range of applications. The BEING Controller guarantees temperature accuracy and control. We engineer the best safety features into all our products ensuring peace of mind to our customers.

Features:

• Colorful LCD display
• Adjustable Fan Speed allows user to regulate air flow around samples
• Double door with inner glass door allowing full width viewing of samples making for easy cleaning
• Interior Chamber made from 304 stainless steel with a mirror polished finish
• Anti-tilt shelving helps avoid accidents when shelves are moved
• Top centered portal allows real time testing of internal chamber temperature using external temperature measuring equipment
• Pt100 temperature sensor provides high temperature sensitivity and accuracy
• The BEING Controller provides programmability for 7 periods and 9 steps for each period making for a total of 63 programmable steps

Specifications:

• Chamber Volume: 0.8 cubic ft (19 L)
• Temperature Range: Ambient + 9°F ~ 176°F (Ambient + 5°C ~ 80°C)
• Temperature Stability: 0.36°F (0.2°C)
• Display: 0.1
• Standard/Max Quantity of Shelves: 2/5
• Max. load per shelf: 20 kg
• Net Weight: 26 kg
• Time: 1~5999 min
• Internal Dimension (W x H x D): 9.8 x 9.8 x 12.2” (250 x 250 x 310 mm)
• External Dimension (W x H x D): 20.2 x 18.1 x 20.1” (515 x 460 x 510 mm)
• Electrical Requirement: 120 V, 60 Hz
• Power Consumption: 100 W