Used Lab Equipment

Multiple purpose capabilities allow you to measure a wide range of analytes.

Features:

• Compact footprint provides a space-saving, convenient system
• Intuitive keyboard with integrated controls and LCD display
• Routine measurements require just a few keystrokes
• Direct measurement of routine absorbance or transmittance data
• Concentration mode for single point standard or factor-based quantitative analysis
• Bidirectional RS-232-C interface

Specifications

• Optical System: Grating based, 1200 lines/mm
• Spectral Bandwidth: <=8nm
• Wavelength Range: 325 to 1100nm
• Wavelength Accuracy: ±2.0nm
• Wavelength: Readout: 20-character, 2-line LCD
• Readout: Absorbance, %Transmittance, Concentration
• Range:
  • -0.1 to +2.5A
  • 0 to 125%T
  • 0 to 1999C
• Accuracy:
  • ±0.003A from 0 to 0.3A
  • ±1% from 0.3 to 2.5A
• Noise (at 500nm): <=0.001A at 0A; ±0.004A at 2A
• Drift: 0.003A/hour
• Stray Radiant Energy: <=0.1%T at 340 and 400nm
• Communication Ports
  • RS-232-C (serial)
  • Centronics-compatible (parallel)
• Dimensions: 13L x 12W x 7 in.H (33 x 30 x 19cm)
• Net Weight: 10 lb. (4.5kg)

The EMax Endpoint ELISA Microplate Reader from Molecular Devices, one of the pioneers in microplate detection, offers a ruggedly simple approach to dedicated endpoint assays. A staggering mean time between failure (MTBF) of 20,000 hours is achieved by 97 independent and stationary fiber optics so that the microplate remains stationary during the entire reading cycle, reducing the number of moving parts. No optical alignment needed during the lifetime of the instrument!

Includes:

• Computer Loaded with SoftMax Pro 5.4.1
• All Necessary Cables and Cords
• Manuals

Features:

• Extend uptime with an estimated 20,000 hour mean time between failures
• Maximize assay signal-to-noise ratios through a unique optical system that directs all available light to each well
• Achieve higher throughput with a 5 second microplate read time
• Read up to 2 wavelengths in endpoint absorbance for 96-well plates
• Mix samples in microplate wells by user-programmable Automix feature
• Operate without an attached computer using the onboard microprocessor
• Add assay flexibility with additional filters

General Specifications:

• Dimensions (H x W x D):4 x 18.3 x 13.4 in.
• Wavelength range: 400 - 750 nm
• Photometric range:000 to 4.000 OD
• Wavelength selection: Filters
• Photometric resolution: 0.001 OD
• Endpoint read time: 5 seconds
• Temperature range: Ambient

Includes:

• All Manuals Software  and Power Cords
• Computer – Monitor – Keyboard –Mouse

Specifications:

• Wavelength range:  340-850 nm
• Linearity (96-well):  0-4 Abs, +/-2%, 0-3 Abs, +/-2% 340-405nm and continuous mode
• Linearity (384-well):  0-3 Abs, +/-2%
• Read-out range: 0-6 Abs
• Accuracy:  +/-1% or 0.003 Abs
• Measurement time (96):  9 sec continuous mode/14 sec stepping mode
• Measurement time (384):  14 sec continuous mode/42 sec stepping mode
• Light source:  Tungsten halogen lamp
• Detector:  Si photodetector

Specifications:

• Optical System: 12 measurement channels, 1 reference channel
• Wavelength Range: 340 to 750nm
• Wavelength selection: Interefence filters (slide of 4 filters) Bandwidth:10nm
• Measurement Range: 340 to 399nm: 0 to 3.0 OD, 400 to 750 nm: 0 to 4.0 OD
• Accuracy: 0.0 to 2.0 OD/492 nm
• 4 Filter Optics

The ThermoMax is an efficient, temperature-regulated, 96 well microplate reader. With various on-board features and capabilities, the ThermoMax is ideal for use in modern laboratories involved in many applications. The ThermoMax performs automatic mixing before a reading and between readings to ensure reliable and precise results. The Microsoft Windows-based software guarantees smooth operation as it includes single and dual wavelength read, kinetic readings, automix (shake), endpoints, blank patterns, as well as curve fits. The ThermoMax microplate reader provides thermal control and vertical shake, perfect for kinetic readings involving growth curves at 5 seconds per plate. The system can perform readings in a photometric analysis mode as well as kinetic analysis at user-configurable kinetic ranges and intervals, run on-board and temperature regulation diagnostics.

Features:

• Wide photometric range
• Temperature-regulated
• Thermal control and vertical shake
• Microsoft Windows-based software
• Automatic mixing
• Five-second read per plate
• Photometric and kinetic analysis mode

Specifications:

• Wavelength range:- 340-750 nm
• Photometric range: 0.000-4.000 OD
• Kinetic read time: 5 second minimum between readings.
• Endpoint read time: 6 sec.
• Modes: Single wavelength, Dual wavelength, Kinetics, Range, Blank pattern.

The SmartReader 96 comes complete with 4 popular filters: 405,450,492,630nm and twenty six additional filters are available separately to cover a full range from 340 to 750nm.  The integrated filter wheel allows up to 8 filters to be loaded at once, and filters can be selected during programming. Up to two filters can be used for 2 measurements of the sample plate, for calculated comparisons.  Kinetic calculations can be performed by setting multiple readings. The SmartReader 96 is a convenient stand alone reader, all software and the programing system is incorporated into the electronics. However, a convenient USB port on the side allows quick and easy saving of data files to a USB drive, and the universal .csv files can then be shared or transferred to a computer for storage or further processing.  A data port can be used for connecting a computer or basic printer.

Specification:

• Control and Display: 7 inch touch screen (800 x 480 pixels)
• Light Source: Quartz-halogen lamp 6V/10W
• Wavelength Range: 340-750nm (405, 450, 492 and 630 nm filters included)
• Half-Bandwidth of filter: 3~9nm
• Readout Range: 0~4.000 Abs
• Linearity (405nm): 0~2.000 Abs <+1% / 0~4.000 Abs <+2%
• Precision: CV</= 0.2% (0-3) Abs ; CV</= 01.0% (3-4) Abs
• Test Speed: <6 sec. for 96 well plate
• Shaking: 3 modes - slow, medium, fast
• User Interface: Integrated software and touch screen control
• Storage: 200 programs; 100,000 test records
• Ports: USB ports for PC, printer, mouse and flash drive
• Dimensions: 295x440x225 mm (11.6 x 17 x 8.75 inches)
• Weight: 10 kg

Features:

• Multiple collection modes: Fluorescence, phosphorescence, chemi/bio-luminescence, and time resolved phosphorescence measurements can all be easily made without changing a single hardware component
• Lowest cost of ownership: The Cary Eclipse is so robust and reliable that every new instrument comes with a 10-year lamp life guarantee, reducing ongoing expenses to virtually zero. 
• Improved laboratory safety: Additionally the guaranteed exceptionally long lifetime of the lamp in the Cary Eclipse eliminates lamp replacements, a hugely time-consuming and potentially hazardous operation.
• Easy to use: Modular, application-specific software, which satisfies the needs of novice and expert users alike, and the ability to switch between measurement modes without touching the hardware, ensure that any user can quickly get reliable, accurate results with minimal training.
• Expand your analytical capabilities: The superior, unique design of the Cary Eclipse ensures room light immunity allowing the instrument to operate with the front and top panels removed for easy access to sample and fast installation of large accessories.
• Proven sensitivity where you need it most: Optimized design coupled with unique, high-sensitivity optics and detectors ensure that the Cary Eclipse gives you the performance that you need right across the spectrum. 
• Robustness, reliability and sensitivity: Engineered to be the most robust instrument on the market, the Cary Eclipse incorporates the unique Agilent xenon flash lamp to capture a data point every 12.5 ms and scans at 24,000 nm/min without peak shifts perfect for high throughput laboratories and fast kinetics applications.
• Unique Sampling: By incorporating Agilent’s unique capacity to guarantee room light immunity coupled with the highly accurate and reproducible Peltier temperature control, the Cary Eclipse delivers unique sampling opportunities that will expand your analytical capabilities, simplify your workflow and increase your sample throughput.
• Reliable Results: The Cary Eclipse only illuminates the sample when data is actually being acquired. This means that the Cary Eclipse prevents your valuable samples from photodegradation and preserves their integrity to the point that you can measure them over and over again and continue to get the same, reliable result. 

Specifications:

• Dimensions(WxDxH): 60 x 64 x 27 cm (23 x 25 x 10 inches)
• Sensitivity:> 500:1 RMS, 500 nm excitation, excitation and emission slits 10 nm / > 750:1 RMS, 350 nm excitation, excitation and emission slits 10 nm
• Wavelength(s):190 - 1100 nm
• Temperature Range: 10 – 35°C
• Optical System: Cerny-Turner 0.125 m Monochromators
• Light Source: Xenon Flash Lamp
• Software: Cary Eclipse Software

Description:

FlowCam® is an imaging particle analysis system that uses flow microscopy to image and analyze subvisible particles with diameters ranging from 1 μm to 600 μm. Simultaneously determine particle shape, type, and size distribution of all detectable particles in your solution.

Specifications:

• Particle Size Range: 1 μm to 600 μm
• Magnification & FlowCells:
  • 20X (~200X magnification), flow cell depth option: 50 μm Field-of-View (FOV)
  • 10X (~100X magnification), flow cell depth option: 100 μm FOV
  • 4X (~40X magnification), flow cell depth option: 300 μm and 600 μm FOV
• Sample Processing Capability: 0.05 mL/minute at 20X and up to 3mL/minute at 4X
• Camera: High resolution (1920x1200 pixels) CMOS. Monochrome and color available.
• Frame Rate: Shutters up to 100 frames per second.
• Fluidics: Micro-syringe pump with multiple sizes to optimize flow rates: 0.5 mL, 1 mL, 5 mL

Features:

PD2100 Series Detector

Description:

The Dynamax UV-DII absorbance detector measures absorbance alternately at first and second wavelengths. When a measurement is made at one wavelength, a projection is made, based on past measurement, of the value of absorbance at the other wavelength. A ratio is taken of the measured value at one wavelength with the projected absorbance at the other wavelength

Specifications:

• Power: 100V/120V/220V/240V
• Hz: 50-60Hz
• Fuse: 5ASB/100/120V, 1.25ASB/220/240V

State-of-the-art technology with an easy-to-use format in a compact footprint: that is the Eppendorf BioPhotometer! It's large key pads, pre-programmed methods, and pre-set wavelengths and conversion factors greatly simplify the sample quantification. The large LCD screen displays the sample concentrations, absorption values, OD260/OD230 and OD260/OD230 and sample dilutions at a glance.

Features:

• Compact design, easy to transport
• Robust housing, splash- and water-resistant
• High-value components guarantee high operating safety
• Metal housing ensures high stability
• Xenon flash lamp source with extremely long service life
• Ready to measure immediately (no warmup time)
• Self-explanatory, extremely simple operation
• Measurement only takes approx 2 seconds
• Programmed methods: ssDNA, dsDNA, RNA, Oligo, Protein, Lowry/Lowry micro, Bradford/Bradford micro, BCA/BCA micro, and OD 600
• Optional background correction at 320 nm for UV methods
• Automatic calculation of sample dilution
• Simple conversion using the "Conversion" key
• Up to 10 standards for colorimetric analyses
• Storage of the last 100 results and all corresponding data
• Storage of all calibrations
• Sample data and calibration data can be called up after being stored

Specifications:

• Optical system:  Absorption, single-beam photometer with reference beam
• Light source: Xenon flash lamp
• Light beam height: 8.5 mm
• Spectral range:  220 to 750 nm
• Wavelengths: Xe 230; 260; 280; 320; 562; 595 nm
• Spectral range width: 5 nm: 230 to 320 nm; 7 nm: 562 to 595 nm
• Photometric measuring range: 0,000 to 3,000 A
• Photometric accuracy: ±1% at 1 A
• Photometric precision: < 0.5% at 1 A
• Method-dependent evaluation:    - Absorbance/concentration using factor
  • Concentration using calibration with 1 to 10 standards
  • One-point calibration (1 std) / linear regression (2 to 10 standards)
  • Non-linear regression (polynom, 3rd degree; 4 or 5 standards), 1x, 2x or 3x determination
  • Ratio 260/280, ratio 260/230, molar concentration, total yield
  • Warburg formula for protein direct A280
• Calibration memory: For protein methods
• Results memory: For 100 results with absorbance, ratio values, sample no., dilution, date and time
• Printer interface: RS-232C, serial, for printer or PC with BioPhotometer software package
• Power consumption: Approx. 20 W in operation; 10 W in standby mode
• Cuvettes: UVette and common rectangular cuvettes of suitable glass or plastic materials

Versatile spectrometers operating in the ultraviolet (UV) and visible (Vis) spectral ranges. Optical components are coated with silica for durability and holographic grating is used in the monochromator. Features a double-beam, all-reflecting system, usable for a wide range of applications.

Includes:

• Computer loaded w/ software
• 6 cell Cuvette Holder
• Peltier Port

Modes Of Operation:

• Scanning
• Wavelength program
• Time-drive
• Rate
• Quant
• Scanning quant

Features:

• True double-beam operation
• High throughput, low stray-light optics
• Pre-aligned deuterium and tungsten-halogen lamps
• Wide range of accessories and consumables

Benefits:

• Very high stability, high accuracy and reproducibility.
• Easily passes all pharmacopoeia and regulatory performance tests
• Quickly replaced for minimal downtime
• Perfect for any liquid sample
• Select the version that best matches your analysis needs and the skill level of your operators

Applications:

• Routine UV/ Vis Testing
• Liquids Analysis
• Solids, Pastes, and Powder Samples
• Regulatory Tests requiring variable bandwidths

Specifications:

• Temperature Range: Ambient 15ºC to 35ºC
• Relative Humidity: 20% to 80% (without condensation)
• Dimensions: 650 x  560 x 260 nm (W x D x H)
• Wavelength Range: 190 nm to 1100 nm
• Wavelength Accuracy: ±0.1 nm
• Wavelength Reproducibility: ±0.1 nm
• Spectral Bandwidth: 0.5 nm, 1 nm, 2 nm, 4 nm
• Beam Center Height: 15 mm
• Optical Path Length: 121 mm
• Scan Speeds (nm/min): 7.5, 15, 30 , 60, 120, 240, 480, 960, 1920 and 2880
• Photometric Range: 0% to 100%
• Detector: Photodiodes
• Grating: Holographic, 1053 lines/mm
• Lamp Change: Automatically at 326 nm
• Radiation Sources: Pre-Aligned Deuterium and Halogen Lamps
• Digital Port: One RS 232 C Interface
• Type: Scanning Double-Beam
• Pollution Degree: 2
• Altitude: Up to 2000 m

Versatile spectrometers operating in the ultraviolet (UV) and visible (Vis) spectral ranges. Optical components are coated with silica for durability and holographic grating is used in the monochromator. Features a double-beam, all-reflecting system, usable for a wide range of applications.

Includes:

• Computer loaded w/ software
• 6 cell Cuvette Holder
• Peltier Port

Modes Of Operation:

• Scanning
• Wavelength program
• Time-drive
• Rate
• Quant
• Scanning quant

Features:

• True double-beam operation
• High throughput, low stray-light optics
• Pre-aligned deuterium and tungsten-halogen lamps
• Wide range of accessories and consumables

Benefits:

• Very high stability, high accuracy and reproducibility.
• Easily passes all pharmacopoeia and regulatory performance tests
• Quickly replaced for minimal downtime
• Perfect for any liquid sample
• Select the version that best matches your analysis needs and the skill level of your operators

Applications:

• Routine UV/ Vis Testing
• Liquids Analysis
• Solids, Pastes, and Powder Samples
• Regulatory Tests requiring variable bandwidths

Specifications:

• Temperature Range: Ambient 15ºC to 35ºC
• Relative Humidity: 20% to 80% (without condensation)
• Dimensions: 650 x  560 x 260 nm (W x D x H)
• Wavelength Range: 190 nm to 1100 nm
• Wavelength Accuracy: ±0.1 nm
• Wavelength Reproducibility: ±0.1 nm
• Spectral Bandwidth: 0.5 nm, 1 nm, 2 nm, 4 nm
• Beam Center Height: 15 mm
• Optical Path Length: 121 mm
• Scan Speeds (nm/min): 7.5, 15, 30 , 60, 120, 240, 480, 960, 1920 and 2880
• Photometric Range: 0% to 100%
• Detector: Photodiodes
• Grating: Holographic, 1053 lines/mm
• Lamp Change: Automatically at 326 nm
• Radiation Sources: Pre-Aligned Deuterium and Halogen Lamps
• Digital Port: One RS 232 C Interface
• Type: Scanning Double-Beam
• Pollution Degree: 2
• Altitude: Up to 2000 m

Description:

Thermo Scientific™ NanoDrop 8000 is a muti-sample micro-volume UV-Vis spectrophotometer. With the NanoDrop 8000, you can measure more samples in less time with the same reliability and patented sample retention technology of the NanoDrop 2000.

Specifications:

• Absorbance Accuracy: 3% (at 0.74 Abs at 350nm)
• Absorbance Range: 0 - 75Abs
• Accuracy: 0.003 *SD of 10 individual measurements at 0.74Abs
• Accuracy (Absorption): 3% (at .74 at 350nm)
• Applications: Nucleic acid, protein, cell culture and custom methods
• Certifications/Compliance: UL/CSA and CE
• Detection Limits: 2.5 ng/µL (dsDNA), 0.15 mg/mL (BSA)
• Detection Range: 2.5-3,700 ng/µL (dsDNA), 0.15 - 100 mg/mL (BSA)
• Detector Type: 2048-element linear silicon CCD array
• Footprint: 24 x 32 cm
• Lamp: Xenon Flash Lamp
• Measurement Time: <20 sec.
• No. of Samples: Up to 8
• Pathlength: 0.1, 0.2 and 1.0 mm
• Sample Volume: 1µL
• Spectral Resolution: ≤3 nm (FWHM at Hg 546.1 nm)
• Voltage: 12VDC
• Wattage: ±1 nm
• Wavelength Accuracy: ±1 nm
• Wavelength Range: 220 - 750 nm
• Weight: 3.4 kg

Includes:
• Computer w/ Software
• Necessary Cables
• Manual

The NanoDrop 1000 Spectrophotometer measures 1 ul samples with high accuracy and reproducibility. The full spectrum (220nm-750nm) spectrophotometer utilizes a patented sample retention technology that employs surface tension alone to hold the sample in place. This eliminates the need for cumbersome cuvettes and other sample containment devices and allows for clean up in seconds. In addition, the NanoDrop 1000 Spectrophotometer has the capability to measure highly concentrated samples without dilution (50X higher concentration than the samples measured by a standard cuvette spectrophotometer).

UV/VIS spectrophotometry is simple for samples as small as 1 ul using the NanoDrop 1000 Spectrophotometer. The small sample requirement and ease of use make the NanoDrop 1000 Spectrophotometer ideally suited for measuring:
• Nucleic acid concentration and purity of nucleic acid samples up to 3700 ng/ul (dsDNA) without dilution
• Fluorescent dye labeling density of nucleic acid microarray samples
• Purified protein analysis (A280) up to 100 mg/ml (BSA)
• Expanded spectrum measurement and quantitation of fluorescent dye labeled proteins, conjugates, and metalloproteins
• Bradford Assay analysis of protein
• BCA Assay analysis of protein
• Lowry Assay analysis of protein
• Pierce Protein 660 nm Protein Assay
• Cell density measurements
• General UV-Vis spectrophotometry

Specifications:

Sample Size: 1 microliter

Path Length: 1 mm (with auto-ranging to 0.2 mm)

Light Source: Xenon flash lamp

Detector Type: 2048-element linear silicon CCD array

Wavelength Range: 220-750 nm

Wavelength Accuracy: 1 nm

Wavelength Resolution: 3 nm (FWHM at Hg 546 nm)

Absorbance Precision: 0.003 absorbance ( 1mm path)

Absorbance Accuracy: 2% (at 0.76 absorbance at 257 nm)

Absorbance Range: 0.02-75 (10 mm equivalent absorbance)

Detection Limit: 2 ng/microliter (dsDNA)

Maximum Concentration: 3700 ng/microliter (dsDNA)

Measurement Cycle Time: 10 seconds

Dimensions: 14 cm X 20 cm

Weight: 1.6 kg

Sample Pedestal Material of Construction: 303 stainless steel and quartz fiber

Operating Voltage: 12 Vdc

Operating Power Consumption: 6 W

Standby Power Consumption: 1.5 W Heating : 37 ± 0.5 °C